Printer Canon LBP611c does not work propely

English Hardware
#1

If I use UFR II driver, I get a blank page from any source. If I use any other driver, I do not get any response from the printer at all.
Please, help.

#2

Post:

zypper se -si cnrdrv cnrcups

Can you get a testpage in Yast-----Hardware—Printers or cups:

localhost:631
#3 
 S  | Name               | Type    | Version | Arch   | Repository 
---+--------------------+---------+---------+--------+------------------
 i+ | cnrdrvcups-ufr2-uk | package | 5.40-1  | x86_64 | (System Packages)

With the testpage I have the same problem.

#4

You have unzipped the linux-UFRII-drv-v540-uken-21.tar.gz, go to the /linux-UFRII-drv-v540-uken/PPD/RPM/ directory and install all rpms…

Please do not quote the question, post the whole commandline with the output and not only the output…

#5

This are Redhad rpms, so have you installed:
jbigkit
libbeecrypt-devel
libbeecrypt6
libgcrypt-devel
libgcrypt20

Goto the directory with the cnrdrvcups-ufr2-uk-5.40-1.x86_64.rpm, open an terminal in that directory and as root:

zypper in -f ./cnrdrvcups-ufr2-uk-5.40-1.x86_64.rpm

Not needed, because the ppd for LBP611c is inside the above rpm.
Also got o the directory where the ppd.pms are stored and as root:

zypper in -f ./*.rpm

Does it work?

#6

jbigkit
libbeecrypt-devel
libbeecrypt6
libgcrypt-devel
libgcrypt20
just have been installed.


zypper se -si cnrdrv cnrcups                             
Loading repository data... 
Reading installed packages... 

S  | Name                | Type    | Version | Arch   | Repository 
---+---------------------+---------+---------+--------+------------------ 
i+ | cnrcupsiradv6860zk  | package | 5.30-1  | noarch | (System Packages) 
i+ | cnrcupsiradvc3822zk | package | 5.30-1  | noarch | (System Packages) 
i+ | cnrcupsiradvc3826zk | package | 5.30-1  | noarch | (System Packages) 
i+ | cnrcupsiradvc3830zk | package | 5.30-1  | noarch | (System Packages) 
i+ | cnrcupsiradvc3835zk | package | 5.30-1  | noarch | (System Packages) 
i+ | cnrcupsiradvc568zk  | package | 5.30-1  | noarch | (System Packages) 
i+ | cnrcupsiradvc5840zk | package | 5.30-1  | noarch | (System Packages) 
i+ | cnrcupsiradvc5860zk | package | 5.30-1  | noarch | (System Packages) 
i+ | cnrcupsirc1533izk   | package | 5.30-1  | noarch | (System Packages) 
i+ | cnrcupsirc1538izk   | package | 5.30-1  | noarch | (System Packages) 
i+ | cnrcupsirc3222zk    | package | 5.30-1  | noarch | (System Packages) 
i+ | cnrcupsirc3226zk    | package | 5.30-1  | noarch | (System Packages) 
i+ | cnrcupslbp1533czk   | package | 5.40-1  | noarch | (System Packages) 
i+ | cnrcupslbp1538czk   | package | 5.40-1  | noarch | (System Packages) 
i+ | cnrcupslbp720czk    | package | 5.40-1  | noarch | (System Packages) 
i+ | cnrcupslbp722czk    | package | 5.40-1  | noarch | (System Packages) 
i+ | cnrcupsmf1538czk    | package | 5.30-1  | noarch | (System Packages) 
i+ | cnrcupsmf830czk     | package | 5.30-1  | noarch | (System Packages) 
i+ | cnrcupsmf832czk     | package | 5.30-1  | noarch | (System Packages) 
i+ | cnrdrvcups-ufr2-uk  | package | 5.40-1  | x86_64 | (System Packages)

I do not understand this:

Also got o the directory where the ppd.pms are stored and as root:

And I still have a blank page.

#7

In addition, I have also printer Canon LBP223dw which was connected in the same way, through the LAN. It works fine and without the UFR II driver – through CQUE (https://www.canon.co.uk/support/consumer_products/products/printers/laser/i-sensys-lbp223dw.html?type=drivers&driverdetailid=tcm:14-1185435&os=all&language=en).

#8

Thanks for the help.

I solved my problem. During the verification (./configure) of the cups-filter source, I received the message that there aren’t some image libraries in my system: libjpeg, libpng, libtiff, etc. Employing YaST Software Management, I installed the packages, which contain all required libraries. The solution was checked on another computer with a “clear” OpenSUSE Leap 15.2.