OS 13.2 - MB ASUS Z97-A -- USB 3 Error

English Hardware
1

Hello.

I have replaced my motherboard by an ASUS Z97-A and replace OS 13.1 by 13.2.
After a fresh install and update, I get permanent error (every 30 seconds ):

Feb 12 09:57:26 linux-cc07 kernel: usb 3-8: reset high-speed USB device number 3 using xhci_hcd
Feb 12 09:57:26 linux-cc07 kernel: xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
Feb 12 09:57:26 linux-cc07 kernel: usb 3-8: hub failed to enable device, error -22
Feb 12 09:57:26 linux-cc07 kernel: usb 3-8: reset high-speed USB device number 3 using xhci_hcd
Feb 12 09:57:26 linux-cc07 kernel: xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804291e51c0
Feb 12 09:57:26 linux-cc07 kernel: xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804291e5208

Anything I can do ?
Any help is welcome.

2

More info :

Feb 12 10:55:14 linux-cc07 kernel: usb 3-8: new high-speed USB device number 3 using xhci_hcd
Feb 12 10:55:14 linux-cc07 kernel: usb 3-8: string descriptor 0 read error: -71
Feb 12 10:55:14 linux-cc07 kernel: usb 3-8: New USB device found, idVendor=058f, idProduct=6362
Feb 12 10:55:14 linux-cc07 kernel: usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Feb 12 10:55:14 linux-cc07 kernel: usb-storage 3-8:1.0: USB Mass Storage device detected
Feb 12 10:55:14 linux-cc07 kernel: scsi6 : usb-storage 3-8:1.0
Feb 12 10:55:14 linux-cc07 kernel: usbcore: registered new interface driver usb-storage
Feb 12 10:55:14 linux-cc07 kernel: usbcore: registered new interface driver uas

The concerning device is a NONAME “5-in-1” front panel device. ( 1 usb 2.0, 1 CF/MD card reader, 1 SM/XD card reader, 1 MS/MS-PRO card reader, 1 SD/MMC card reader )

It was recognize under 13.1.

3

More info

linux-cc07:~ # lsusb | grep eader
Bus 003 Device 003: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
linux-cc07:~ #

4

Check whether there are any BIOS settings related to USB.

I seem to recall at least one case where somebody had a USB problem on an ASUS computer, and managed to find a BIOS setting that resolved the problem. I have no idea whether that is relevant to your problem, but it is worth looking through the BIOS settings to see if you can find anything relevant.

5

What order did you do this stuff?? If upgrade before new mother board maybe need to do an mkinitrd to reset the hardware lists.

6

The others usb devices don’t report error.
I think it is because of this particular hardware (Bus 003 Device 003: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer ) which was recognized under 13.1.

On the site http://www.pcidatabase.com/vendor_details.php?id=1672
Concerning “0x058f” “0x6362” “Alcor Micro Corp.” “4-in-1 card reader (istar)”, I have found this :

0x6362
Chip Number: UNKNOWN
Chip Description: Unknown 4-in-1 card reader (istar)
Notes: Driver for msi-k9agm3 motherboard

Any help is welcome

7

I have made a full install from bare metal.

8

Have Submit a bug report : 917912