Hi to all,
My server is running opensuse 12.2, I have wireless adapter TP-LINK TL-WN722N and I want to connect it to my server. When I connect it he is not working ( even not turning on - not blinking ). How can I make it work? Which drivers to install, or etc…
Thanks
On 10/07/2012 05:06 AM, melkij22 wrote:
>
> Hi to all,
> My server is running opensuse 12.2, I have wireless adapter TP-LINK
> TL-WN722N and I want to connect it to my server. When I connect it he is
> not working ( even not turning on - not blinking ). How can I make it
> work? Which drivers to install, or etc…
Until you tell us what wireless chip is in your device, we cannot tell you. Many
manufacturers change the chip without changing the model number, thus we cannot
reliably google for TL-WN722N. If it is a USB device, provide the output of
‘lsusb’. If it is PCI, then ‘/sbin/lspci -nn’. When you reply, also tell us what
desktop you are using and if your system is 32 or 64 bit.
You might also check the output of dmesg to see if you are missing firmware - a
likely case.
TP-LINK TL-WN722N
Interface: USB
ID: 0cf3:9271
FCC ID: TE7WN722N
Chipset: Atheros AR9002U
Chip 1: Atheros AR9271
My system is 64 bit
I have installed compat-wireless, now when I insert wi-fi device to USB it’s blinking 3sec and then turning off
Please, if output is requested, copy and paste it from a terminal window, and post the output between CODE tags. That way it’s more readable, and we will know it’s exactly that what your system returns.
On this matter: AFAIK the Atheros chips are supported by the kernel.
here it is
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 002: ID 03f0:7029 Hewlett-Packard
Bus 001 Device 022: ID 04d9:1503 Holtek Semiconductor, Inc. Shortboard Lefty
Bus 001 Device 021: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n
and some from dmesg
3325.432997] usb 1-1.2: USB disconnect, device number 27
3325.656660] ath: Failed to wakeup in 500us
3325.675301] usb 1-1.2: ath9k_htc: USB layer deinitialized
3328.424571] usb 1-1.2: new low speed USB device number 32 using ehci_hcd
3328.533157] usb 1-1.2: New USB device found, idVendor=04d9, idProduct=1503
3328.533162] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
3328.533165] usb 1-1.2: Product: USB Keyboard
3328.533167] usb 1-1.2: Manufacturer:
3328.543341] input: USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input41
3328.543820] generic-usb 0003:04D9:1503.0027: input,hidraw3: USB HID v1.10 Keyboard USB Keyboard] on usb-0000:00:1a.0-1.2/input0
3328.560358] input: USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input42
3328.560719] generic-usb 0003:04D9:1503.0028: input,hidraw4: USB HID v1.10 Device USB Keyboard] on usb-0000:00:1a.0-1.2/input1
3356.910935] usb 1-1.2: USB disconnect, device number 32
3359.902742] usb 1-1.2: new high speed USB device number 33 using ehci_hcd
3360.008429] usb 1-1.2: New USB device found, idVendor=0cf3, idProduct=9271
3360.008433] usb 1-1.2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
3360.008436] usb 1-1.2: Product: USB2.0 WLAN
3360.008439] usb 1-1.2: Manufacturer: ATHEROS
3360.008440] usb 1-1.2: SerialNumber: 12345
3360.300734] usb 1-1.2: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
3360.535591] ath9k_htc 1-1.2:1.0: ath9k_htc: HTC initialized with 33 credits
3360.725155] ath9k_htc 1-1.2:1.0: ath9k_htc: FW Version: 1.3
3360.725159] ath: EEPROM regdomain: 0x809c
3360.725161] ath: EEPROM indicates we should expect a country code
3360.725163] ath: doing EEPROM country->regdmn map search
3360.725165] ath: country maps to regdmn code: 0x52
3360.725167] ath: Country alpha2 being used: CN
3360.725168] ath: Regpair used: 0x52
3360.725879] ieee80211 phy5: Atheros AR9271 Rev:1
3360.726801] Registered led device: ath9k_htc-phy5
3360.726805] usb 1-1.2: ath9k_htc: USB layer initialized
3361.025022] ADDRCONF(NETDEV_UP): wlan0: link is not ready
3362.346254] wlan0: authenticate with c8:3a:35:41:79:18 (try 1)
3362.348158] wlan0: authenticated
3362.348179] wlan0: associate with c8:3a:35:41:79:18 (try 1)
3362.351532] wlan0: RX AssocResp from c8:3a:35:41:79:18 (capab=0x11 status=12 aid=5)
3362.351536] wlan0: c8:3a:35:41:79:18 denied association (code=12)
3362.351552] wlan0: deauthenticating from c8:3a:35:41:79:18 by local choice (reason=3)
4044.178618] nscd[6226]: segfault at 2 ip 0000000000000002 sp 00007fff125c57b8 error 14 in libnss_files-2.15.so[7f8294083000+c000]
4081.287864] nscd[6338]: segfault at 2 ip 0000000000000002 sp 00007fffc0707b28 error 14 in libnss_files-2.15.so[7f284016d000+c000]
4081.343858] nscd[6339]: segfault at 2 ip 0000000000000002 sp 00007fff149b7188 error 14 in libnss_files-2.15.so[7fbb956be000+c000]
4081.359354] nscd[6340]: segfault at 2 ip 0000000000000002 sp 00007fff1a7a93a8 error 14 in libnss_files-2.15.so[7f71c1433000+c000]
4082.156052] nscd[6353]: segfault at 2 ip 0000000000000002 sp 00007fffa3704a98 error 14 in libnss_files-2.15.so[7fa5e13c7000+c000]
4082.157271] nscd[6354]: segfault at 2 ip 0000000000000002 sp 00007fff606d5b98 error 14 in libnss_files-2.15.so[7f3026d0e000+c000]
4093.294115] nscd[6444]: segfault at 2 ip 0000000000000002 sp 00007fffbb5a75c8 error 14 in libnss_files-2.15.so[7fc49d54f000+c000]
On 10/08/2012 05:16 AM, melkij22 wrote:
> 3362.351532] wlan0: RX AssocResp from c8:3a:35:41:79:18 (capab=0x11 status=12 aid=5)
> 3362.351536] wlan0: c8:3a:35:41:79:18 denied association (code=12)
> 3362.351552] wlan0: deauthenticating from c8:3a:35:41:79:18 by local choice (reason=3)
I am not sure what code 12 means in denial of association means. Does that AP
have MAC filtering enabled?
no, MAC filtering is disabled. With this wireless adapter I can connect from others PC to internet, but on opensuse I can’t 
Ah, you’re using ifup. Go Yast - Networkdevices - Networksettings, and configure the device (it needs to be plugged in). Then reboot with the USB device inserted, and report what happens.
On 10/08/2012 06:56 AM, melkij22 wrote:
>
> no, MAC filtering is disabled. With this wireless adapter I can connect
> from others PC to internet, but on opensuse I can’t
I suggest that you refile this report on the mailing list at
linux-wireless@vger.kernel.org. That way the Atheros developers will see it.
Is this on the same server PC that you mention in another thread? Where an upgrade went wrong? Or is this on a clean install?
yes, it is
Which does not exactly answer my question :D. So this is on a clean install?
no, not on clean. I was using this server about 6 months
back me again
I have installed fresh install of opensuse 12.2
Then I installed
software.opensuse.org:
compat-wireless home:Lord_LT:drivers 20120703
but no luck. System didn’t recognizing wireless adapter even I don’t see it and can’t configure in Yast -> network settings
Any suggestions?
Post output of
lsusb
and
su -c lspci
and
ip addr
I have managed to make it work , now another problem.
I see that adapter has connected -> router has assigned ip and everything seems to be good ( i have connected to router, and I see that everything is fine ).
But problem is that - No internet, can’t access any page, but can ping router. I disabled firewall but no luck
p.s if I connect pc with router with cable, internet is working
i have managed to do it, it was problem with route
tnx to all