Devices
HL-DT-ST BD-RE BH12LS30 1.01 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, BD-ROM, BD-R, BD-RE, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R sekvenční, DVD-R dvojvrstvé sekvenční, DVD-R dvojvrstvé (skok), DVD-RAM, DVD-RW omezené přepisování, DVD-RW sekvenční, DVD+RW, DVD+R, DVD+R dvojvrstvé, CD-ROM, CD-R, CD-RW, BD-ROM, BD-R sekvenční (SRM), BD-R náhodné (RRM), BD-RE] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Omezené přepisování, Skok mezi vrstvami, Náhodné nahrávání, Sekvěnční nahrávání, Sekvenční nahrávání + POW] %7]
System
K3b Version: 2.0.2
KDE Version: 4.9.2 “release 511”
QT Version: 4.8.3
Kernel: 3.1.10-1.16-desktop
Used versions
cdrecord: 1.1.11
cdrecord
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: ‘/dev/sr0’
devname: ‘/dev/sr0’
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: ‘burnfree’
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : ‘HL-DT-ST’
Identification : 'BD-RE BH12LS30 ’
Revision : ‘1.01’
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0040 (BD-ROM)
Profile: 0x0041 (BD-R sequential recording)
Profile: 0x0042 (BD-R random recording)
Profile: 0x0043 (BD-RE)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0014 (DVD-RW sequential recording) (current)
Profile: 0x0013 (DVD-RW restricted overwrite) (current)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM) (current)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 2555904 = 2496 KB
Drive DMA Speed: 18275 kB/s 103x CD 13x DVD
FIFO size : 12582912 = 12288 KB
/usr/bin/wodim: WARNING: Could not manage to find medium size, and more than 90 mins of data.
Speed set to 5540 KB/s
Track 01: data 4453 MB
Total size: 5113 MB (506:39.14) = 2279936 sectors
Lout start: 5114 MB (506:41/11) = 2279936 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Starting to write CD/DVD at speed 4.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer … Errno: 5 (Input/output error), reserve track scsi sendcmd: no error
CDB: 53 00 00 00 00 00 22 CA 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 53 00 00 0D 24 00 00 C0
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid) error refers to command part, bit ptr 0 (not valid) field ptr 0
cmd finished after 0.002s timeout 200s
/usr/bin/wodim: Cannot open new session.
input buffer ready.
Writing time: 0.058s
/usr/bin/wodim: fifo had 191 puts and 0 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=4 -sao driveropts=burnfree -data -tsize=2279936s -