nvidia 240M + tree monitors configuration problem

English Hardware
1

Hi,

I’m running openSuse 11.3 x64 on my Lenovo y550p laptop. I have built in laptop display, some external display connected with d-sub and TV connected with HDMI via sound receiver. And I can’t make my system works with all these monitors together. I need HDMI connected all time because I prefer to use my receiver instead of laptop speakers for audio output. Every time I enable TV with nvidia-settings utility the laptop screen becomes disabled. I tried every possible combination with TwinView and Separate X screen, but unsuccessful.

Here is my xorg.conf below:


# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 256.35  (buildmeister@builder97.nvidia.com)  Wed Jun 16 19:14:45 PDT 2010

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 256.35  (buildmeister@builder97.nvidia.com)  Wed Jun 16 19:15:05 PDT 2010

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Samsung B2430L"
    HorizSync       30.0 - 81.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "CMO"
    HorizSync       30.0 - 75.0
    VertRefresh     60.0
EndSection

Section "Monitor"
    Identifier     "Monitor2"
    VendorName     "Unknown"
    ModelName      "TOSHIBA-TV"
    HorizSync       15.0 - 81.0
    VertRefresh     23.0 - 76.0
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GT 240M"
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GT 240M"
    BusID          "PCI:1:0:0"
    Screen          1
EndSection

Section "Device"
    Identifier     "Device2"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GT 240M"
    BusID          "PCI:1:0:0"
    Screen          2
EndSection

Section "Screen"

# Removed Option "metamodes" "CRT: nvidia-auto-select +0+0, DFP-0: nvidia-auto-select +1920+0"
# Removed Option "TwinView" "1"
# Removed Option "metamodes" "CRT: nvidia-auto-select +0+0, DFP-1: nvidia-auto-select +1920+0"
# Removed Option "TwinView" "0"
# Removed Option "metamodes" "CRT: nvidia-auto-select +0+0"
# Removed Option "TwinView" "1"
# Removed Option "metamodes" "CRT: nvidia-auto-select +0+0, DFP-0: nvidia-auto-select +1920+0"
# Removed Option "TwinView" "0"
# Removed Option "metamodes" "CRT: nvidia-auto-select +0+0"
# Removed Option "metamodes" "CRT: nvidia-auto-select +0+0, DFP-1: nvidia-auto-select +1920+0"
# Removed Option "TwinView" "1"
# Removed Option "metamodes" "CRT: nvidia-auto-select +0+0, DFP-0: nvidia-auto-select +1920+0"
# Removed Option "TwinView" "0"
# Removed Option "metamodes" "CRT: nvidia-auto-select +0+0"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "1"
    Option         "TwinViewXineramaInfoOrder" "CRT-0"
    Option         "metamodes" "CRT: nvidia-auto-select +0+0, DFP-0: nvidia-auto-select +1920+0; CRT: nvidia-auto-select +0+0, DFP-0: NULL"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"

# Removed Option "metamodes" "DFP-1: nvidia-auto-select +0+0"
# Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0"
# Removed Option "metamodes" "DFP-1: nvidia-auto-select +0+0"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "DPI" "96 x 96"
    Option         "TwinView" "0"
    Option         "metamodes" "DFP-0: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"

# Removed Option "metamodes" "DFP-1: nvidia-auto-select +0+0"
    Identifier     "Screen2"
    Device         "Device2"
    Monitor        "Monitor2"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP-1: nvidia-auto-select +9600+-1583891584"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

A lot of thanks in advance.

2

bump, please help

3

still actual