Not showning rigth graphics card in about system

hui · June 9, 2025, 12:36pm

Ok looks good so far. You may want to remove repository 1 as it is a duplicate of the managed repo number 2.
This can be done via
sudo zypper rr 1

To prevent conflicts due to different driver versions, you should remove the existing kmp/cuda packages:

sudo zypper rm nvidia-open-driver-G06-signed-cuda-default-devel nvidia-open-driver-G06-signed-cuda-kmp-default nvidia-open-driver-G06-signed-cuda-kmp-longterm nvidia-open-driver-G06-signed-cuda-longterm-devel

And now install the drivers via:

sudo zypper in nvidia-compute-G06 nvidia-compute-utils-G06 nvidia-gl-G06 nvidia-video-G06

(Agree to the license text. No need to scroll down, just hit “q” and type “yes”, enter)

Reboot and post the output of
zypper se -si nvidia
and
inxi -GSaz

busolof · June 9, 2025, 12:45pm

  | Name                                        | Type  | Version                  | Arch   | Repository
---+---------------------------------------------+-------+--------------------------+--------+--------------
i  | kernel-firmware-nvidia                      | paket | 20250206-4.1             | noarch | repo-oss
i  | libnvidia-egl-gbm1                          | paket | 1.1.2-7.9                | x86_64 | repo-non-free
i  | libnvidia-egl-wayland1                      | paket | 1.1.19-49.1              | x86_64 | repo-non-free
i  | libnvidia-egl-x111                          | paket | 1.0.1-16.1               | x86_64 | repo-non-free
i  | nvidia-common-G06                           | paket | 570.153.02-36.1          | x86_64 | repo-non-free
i+ | nvidia-compute-G06                          | paket | 570.153.02-36.1          | x86_64 | repo-non-free
i+ | nvidia-compute-utils-G06                    | paket | 570.153.02-36.1          | x86_64 | repo-non-free
i+ | nvidia-gl-G06                               | paket | 570.153.02-36.1          | x86_64 | repo-non-free
i  | nvidia-modprobe                             | paket | 570.153.02-14.1          | x86_64 | repo-non-free
i+ | nvidia-open-driver-G06-signed-default-devel | paket | 570.153.02-2.1           | x86_64 | repo-oss
i  | nvidia-open-driver-G06-signed-kmp-default   | paket | 570.153.02_k6.15.0_1-2.1 | x86_64 | repo-oss
i  | nvidia-persistenced                         | paket | 570.153.02-2.1           | x86_64 | repo-non-free
i  | nvidia-userspace-meta-G06                   | paket | 570.153.02-2.1           | noarch | repo-non-free
i  | nvidia-userspace-meta-G06                   | paket | 570.153.02-2.1           | noarch | repo-non-free
i+ | nvidia-video-G06                            | paket | 570.153.02-36.1          | x86_64 | repo-non-free
i+ | openSUSE-repos-Tumbleweed-NVIDIA            | paket | 20250606.b852490-1.1     | x86_64 | repo-oss
bengt@bengt-omenbyhplaptop16c0xxx:~>

ystem:
Kernel: 6.15.0-1-default arch: x86_64 bits: 64 compiler: gcc v: 14.3.0
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-6.15.0-1-default
root=UUID=b631ed4e-32ed-45a5-9826-9e8d6712c606 splash=silent
mitigations=auto quiet security=selinux selinux=1
rd.driver.blacklist=nouveau
Desktop: KDE Plasma v: 6.3.5 tk: Qt v: N/A info: frameworks v: 6.14.0
wm: kwin_x11 tools: avail: xscreensaver vt: 2 dm: SDDM Distro: openSUSE
Tumbleweed 20250606
Graphics:
Device-1: NVIDIA GA104M [GeForce RTX 3070 Mobile / Max-Q]
vendor: Hewlett-Packard driver: nvidia v: 570.153.02
alternate: nouveau,nvidia_drm non-free: 550/565.xx+ status: current (as
of 2025-01; EOL~2026-12-xx) arch: Ampere code: GAxxx
process: TSMC n7 (7nm) built: 2020-2023 pcie: gen: 3 speed: 8 GT/s
lanes: 8 link-max: gen: 4 speed: 16 GT/s lanes: 16 ports: active: none
off: DP-2 empty: HDMI-A-1 bus-ID: 01:00.0 chip-ID: 10de:249d
class-ID: 0300
Device-2: Advanced Micro Devices [AMD/ATI] Cezanne [Radeon Vega Series /
Radeon Mobile Series] vendor: Hewlett-Packard driver: amdgpu v: kernel
arch: GCN-5 code: Vega process: GF 14nm built: 2017-20 pcie: gen: 3
speed: 8 GT/s lanes: 16 ports: active: eDP-1 empty: DP-1 bus-ID: 07:00.0
chip-ID: 1002:1638 class-ID: 0300 temp: 52.0 C
Device-3: Chicony HP Wide Vision HD Camera driver: uvcvideo type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-3:4 chip-ID: 04f2:b735
class-ID: fe01 serial:
Display: x11 server: X.Org v: 21.1.15 with: Xwayland v: 24.1.6
compositor: kwin_x11 driver: X: loaded: modesetting,nvidia unloaded: vesa
alternate: fbdev,nouveau,nv dri: radeonsi
gpu: amdgpu,nvidia,nvidia-nvswitch display-ID: :0 screens: 1
Screen-1: 0 s-res: 4480x1440 s-dpi: 96 s-size: 1185x381mm (46.65x15.00")
s-diag: 1245mm (49.01")
Monitor-1: DP-2 mapped: DP-1-0 note: disabled pos: left
model: HP OMEN 27i IPS serial: built: 2020 res: N/A dpi: 109
gamma: 1.2 size: 1x1mm (0.04x0.04") diag: 685mm (27") ratio: 16:9 modes:
max: 2560x1440 min: 640x480
Monitor-2: eDP-1 pos: primary,right model: BOE Display 0x09e5 built: 2020
res: mode: 1920x1080 hz: 165 scale: 100% (1) dpi: 137 gamma: 1.2
size: 355x200mm (13.98x7.87") diag: 407mm (16") ratio: 16:9 modes:
max: 2560x1440 min: 640x480
API: EGL v: 1.5 hw: drv: nvidia nouveau drv: nvidia drv: amd radeonsi
platforms: device: 0 drv: nvidia device: 1 drv: nouveau device: 2
drv: radeonsi device: 3 drv: swrast gbm: drv: nvidia surfaceless:
drv: nvidia x11: drv: radeonsi inactive: wayland
API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: amd mesa v: 25.0.5 glx-v: 1.4
direct-render: yes renderer: AMD Radeon Graphics (radeonsi renoir ACO DRM
3.63 6.15.0-1-default) device-ID: 1002:1638 memory: 500 MiB unified: no
API: Vulkan v: 1.4.313 layers: 2 device: 0 type: integrated-gpu name: AMD
Radeon Graphics (RADV RENOIR) driver: N/A device-ID: 1002:1638
surfaces: N/A device: 1 type: discrete-gpu name: NVIDIA GeForce RTX 3070
Laptop GPU driver: N/A device-ID: 10de:249d surfaces: N/A device: 2
type: cpu name: llvmpipe (LLVM 20.1.5 256 bits) driver: N/A
device-ID: 10005:0000 surfaces: N/A
Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo
de: kscreen-console,kscreen-doctor gpu: nvidia-smi wl: wayland-info
x11: xdpyinfo, xprop, xrandr

now showing correct driver in about system

hui · June 9, 2025, 12:47pm

That is perfect

busolof · June 9, 2025, 12:48pm

Yes, indeed, thanks for help, Have learn something today.

qwert.zuiop · June 9, 2025, 2:42pm

pro as in proprietary…

busolof · June 9, 2025, 3:03pm

have some problem with play an game world of warcraft is hanging when try change to rtx 3070

hui · June 9, 2025, 3:08pm

How do you switch to the Nvidia GPU? Via switcherooctl?
https://en.opensuse.org/SDB:NVIDIA_Switcheroo_Control

busolof · June 9, 2025, 3:44pm

no try do move game to my 27 tum screen the resolution,
My gpu is discreet, have another linux system there is no problem.
Tryed everything checked lutris software.
Perhaps tryed Bottles but could not start.
Not sure what I do now go back to that linux system is working for me

busolof · June 9, 2025, 3:46pm

have switcherooctl tryed install that says is installed

busolof · June 9, 2025, 3:50pm

switcherooctl list
Device: 0
  Name:        Advanced Micro Devices, Inc. [AMD®/ATI] Cezanne [Radeon Vega Series / Radeon Vega Mobile Series]
  Default:     yes
  Environment: DRI_PRIME=pci-0000_07_00_0

Device: 1
  Name:        NVIDIA Corporation GA104M [GeForce RTX 3070 Mobile / Max-Q]
  Default:     no
  Environment: __GLX_VENDOR_LIBRARY_NAME=nvidia __NV_PRIME_RENDER_OFFLOAD=1 __VK_LAYER_NV_optimus=NVIDIA_only
how change is that problem have here will use Nvidia as default or!!

hui · June 9, 2025, 3:56pm

You can’t change the default. It is hardware coded.

On my Optimus laptop i have adapted the *.desktop files of the applications which i always want to use with the Nvidia in the following way. They contain following string:

PrefersNonDefaultGPU=true

Example *.desktop file:

[Desktop Entry]
Categories=Game;
Comment[de_DE]=Play this game on Steam
Comment=Play this game on Steam
Exec=steam steam://rungameid/306130
GenericName[de_DE]=
GenericName=
Icon=steam_icon_306130
MimeType=
Name[de_DE]=The Elder Scrolls Online
Name=The Elder Scrolls Online
Path=
PrefersNonDefaultGPU=true
StartupNotify=true
Terminal=false
TerminalOptions=
Type=Application
X-KDE-SubstituteUID=false
X-KDE-Username=

OR you adapt the application starters that they look like:

switcherooctl launch -g 1 steam steam://rungameid/gameidherexxxxxx

busolof · June 9, 2025, 4:02pm

something is wrong in the game or is lutris.
When try change an reslution and move to my 27 tum screen there crash game after while.
Not like this problem have no problem on another distro linux system have an backup can restore to again.
Not sure what seeking after linux is new for me