Hey,
are new on opensuse tumbleweed.
In about system in hardware
graphics card 1 showing Amd Radeon Graphics
graphics card 2 showing llvmpipe
Have installed 575.57.08 of Nvidia driver.
How can change on graphics card 2 from llvmpipe to showing Geforce RTX 3070 Mobile /Max-Q.
Will use that graphics card when play games are not installed yet will do that after fixed with graphisc card!!
Please show here complete input/output from inxi -GSaz using code tags
Welcome to the forum.
As first steps can you check that you have the programme āinxiā installed and if not install it.
Then open a ākonsoleā window and use the command:-
inxi -G -c0
The output will look something like the example shown below:
xxx@opensuse:~> inxi -G -c0
Graphics:
Device-1: NVIDIA AD107 [GeForce RTX 4060] driver: nvidia v: 570.153.02
Display: x11 server: X.Org v: 21.1.15 with: Xwayland v: 24.1.6 driver: X:
loaded: nvidia unloaded: modesetting,vesa gpu: nvidia,nvidia-nvswitch
resolution: 1920x1080~60Hz
API: EGL v: 1.5 drivers: nouveau,nvidia,swrast
platforms: gbm,x11,surfaceless,device
API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 570.153.02
renderer: NVIDIA GeForce RTX 4060/PCIe/SSE2
API: Vulkan v: 1.4.313 drivers: N/A surfaces: N/A
Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo
de: kscreen-console,kscreen-doctor gpu: nvidia-settings,nvidia-smi
wl: wayland-info x11: xdpyinfo, xprop, xrandr
xxx@opensuse:~>
Then please add this to your posting. The extra info may help forum users help you.
Graphics:
Device-1: NVIDIA GA104M [GeForce RTX 3070 Mobile / Max-Q] driver: nouveau
v: kernel
Device-2: Advanced Micro Devices [AMD/ATI] Cezanne [Radeon Vega Series /
Radeon Mobile Series] driver: amdgpu v: kernel
Device-3: Chicony HP Wide Vision HD Camera driver: uvcvideo type: USB
Display: x11 server: X.Org v: 21.1.15 with: Xwayland v: 24.1.6 driver: X:
loaded: modesetting unloaded: vesa dri: radeonsi,nouveau gpu: amdgpu,nouveau
resolution: 1: 2560x1440~165Hz 2: 1680x1050~165Hz
API: EGL v: 1.5 drivers: kms_swrast,nouveau,radeonsi,swrast
platforms: gbm,x11,surfaceless,device
API: OpenGL v: 4.6 compat-v: 4.3 vendor: amd mesa v: 25.0.5 renderer: AMD
Radeon Graphics (radeonsi renoir ACO DRM 3.63 6.15.0-1-default)
API: Vulkan v: 1.4.313 drivers: N/A surfaces: N/A
Info: Tools: api: eglinfo, glxinfo, vulkaninfo
de: kscreen-console,kscreen-doctor wl: wayland-info
x11: xdpyinfo, xprop, xrandr
is my info with that commad.
Iāve edited your post to have preformatted text (</>) and hence make the output more readable. I hope you see the difference, please apply this the next time you post output.
1 Like
None of that mousetype image content is readable here. The OPās subsequent response using -G instead of -GSaz omits important troubleshooting information. -c0 is an optional setting that omits colors. It can be made default via file /etc/inxi.conf if desired. which is why I rarely have reason to give it any thought. 
inxi -GSaz needs to be copied from Konsole and pasted as directed in the comment 2 linkās Block code formatting section.
ystem:
Kernel: 6.15.0-1-default arch: x86_64 bits: 64 compiler: gcc v: 14.3.0
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-6.15.0-1-default
root=UUID=09341a0d-6020-41cf-82d9-c80080d140ce splash=silent
mitigations=auto quiet security=selinux selinux=1
Desktop: KDE Plasma v: 6.3.5 tk: Qt v: N/A info: frameworks v: 6.14.0
wm: kwin_x11 tools: avail: xscreensaver vt: 2 dm: SDDM Distro: openSUSE
Tumbleweed 20250606
Graphics:
Device-1: NVIDIA GA104M [GeForce RTX 3070 Mobile / Max-Q]
vendor: Hewlett-Packard driver: nouveau v: kernel
alternate: nvidia_drm,nvidia non-free: 550/565.xx+ status: current (as of
2025-01; EOL~2026-12-xx) arch: Ampere code: GAxxx process: TSMC n7 (7nm)
built: 2020-2023 pcie: gen: 3 speed: 8 GT/s lanes: 8 link-max: gen: 4
speed: 16 GT/s lanes: 16 ports: active: DP-1 empty: HDMI-A-1
bus-ID: 01:00.0 chip-ID: 10de:249d class-ID: 0300
Device-2: Advanced Micro Devices [AMD/ATI] Cezanne [Radeon Vega Series /
Radeon Mobile Series] vendor: Hewlett-Packard driver: amdgpu v: kernel
arch: GCN-5 code: Vega process: GF 14nm built: 2017-20 pcie: gen: 3
speed: 8 GT/s lanes: 16 ports: active: eDP-1 empty: DP-2 bus-ID: 07:00.0
chip-ID: 1002:1638 class-ID: 0300 temp: 55.0 C
Device-3: Chicony HP Wide Vision HD Camera driver: uvcvideo type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-3:4 chip-ID: 04f2:b735
class-ID: fe01 serial: <filter>
Display: x11 server: X.Org v: 21.1.15 with: Xwayland v: 24.1.6
compositor: kwin_x11 driver: X: loaded: modesetting unloaded: vesa
alternate: fbdev,nouveau,nv,nvidia dri: radeonsi,nouveau
gpu: amdgpu,nouveau display-ID: :0 screens: 1
Screen-1: 0 s-res: 4480x1440 s-dpi: 96 s-size: 1185x381mm (46.65x15.00")
s-diag: 1245mm (49.01")
Monitor-1: DP-1 mapped: DP-1-1 pos: left model: HP OMEN 27i IPS
serial: <filter> built: 2020 res: mode: 2560x1440 hz: 165 scale: 100% (1)
dpi: 109 gamma: 1.2 size: 597x336mm (23.5x13.23") diag: 685mm (27")
ratio: 16:9 modes: max: 2560x1440 min: 720x400
Monitor-2: eDP-1 pos: primary,right model: BOE Display 0x09e5 built: 2020
res: mode: 1920x1080 hz: 165 scale: 100% (1) dpi: 137 gamma: 1.2
size: 355x200mm (13.98x7.87") diag: 407mm (16") ratio: 16:9 modes:
max: 2560x1440 min: 640x480
API: EGL v: 1.5 hw: drv: nvidia nouveau drv: amd radeonsi platforms:
device: 0 drv: radeonsi device: 1 drv: nouveau device: 2 drv: swrast gbm:
drv: kms_swrast surfaceless: drv: radeonsi x11: drv: radeonsi
inactive: wayland
API: OpenGL v: 4.6 compat-v: 4.3 vendor: amd mesa v: 25.0.5 glx-v: 1.4
direct-render: yes renderer: AMD Radeon Graphics (radeonsi renoir ACO DRM
3.63 6.15.0-1-default) device-ID: 1002:1638 memory: 500 MiB unified: no
API: Vulkan v: 1.4.313 layers: 1 device: 0 type: cpu name: llvmpipe (LLVM
20.1.5 256 bits) driver: N/A device-ID: 10005:0000 surfaces: N/A
Info: Tools: api: eglinfo, glxinfo, vulkaninfo
de: kscreen-console,kscreen-doctor wl: wayland-info
x11: xdpyinfo, xprop, xrandr
you mean this text above
Thatās likely most of it, but the comment #2 request was for complete input/output. You didnāt do that, so we cannot be sure what we are looking at isnāt the result of a typing error, or part of the output was omitted. What I do see shows no evidence I can recognize that a 5anything NVidia driver installation occurred. I am unfamiliar enough with dual GPU installations that include NVidiaās proprietary drivers to advise how to proceed. @malcolmlewis especially, or one of the other regulars here that have similar hardware, should be able to do that.
IMO, inxi does show much better information about the graphics system than does āAbout Systemā, especially when troubleshooting a graphics problem. It provides many options in its man page to show information desired. -b or --basic provides a simple basic report very roughly similar to Plasmaās report. -e or --expanded takes a basic report rather further. With a included in an appropriate position among options, quite extensive information is available. Particular system sections are easily selected in any combination or alone via other option combinations. The a in -GSaz requested causes the kernelās command line parameters, which can affect graphics state, to be included in output. The z holds back information that may be more sensitive than wished to be shared or necessary to diagnosing a problem that inxi output may help solve.
Hey,
But when writed thes post was an graphics card 2 llvmpipe .
What is that llvmpipe are that for cloud not install correct nvidia drivers
Now showing NV174 but will have Geforce RTX 3070 Mobile
have an backup of another linux distro there working my graphic card is *Endeavouros.
Sorry for my english,
What can Do for get rigth nvidia driver on my laptop is an OMEN by HP Laptop 16-c0xxx
Are newbie on linux
Hello again
Found these guide:
will read on that going after the guide
Donāt use the run file.
you need the NVIDIA repository.
YAST - software repositories -
check if the repository ānvidia Grapics driversā is in the list.
if not
ADD - community repositories - choose NVDIA
, this should install nvidia pro drivers and keep them automatically updated.
If the repo and the driver exist, FORCE update in YAST Software - repository view on the NVIDIA pro drivers.
It is not false to use the run file. Experienced users may want tu use the run file for different reasons.
There is even a SDB how to install the run filee:
https://en.opensuse.org/SDB:NVIDIA_the_hard_way
Nvidia does not provide āProā drivers. AMD doesā¦
Hi,
will test that then.
If that Nvidia Repositories not showing is there an file or url to add there
will test again
have done but how can see if they are installed
To check which Nvidia packages are installed:
zypper se -si nvidia
And if this shows that the Nvidia drivers are installed, you can repeat inxi -GSaz to verify if the modules are actually properly loaded.
have installed these:
nvidia-open-driver-G06-signed-cuda-default-devel | paket | 575.57.08-2.1
nvidia-open-driver-G06-signed-cuda-kmp-default | paket | 575.57.08_k6.15.0_1-2.1 |
nvidia-open-driver-G06-signed-cuda-kmp-longterm | paket | 575.57.08_k6.12.31_1-2.1 |
vidia-open-driver-G06-signed-cuda-longterm-devel | paket | 575.57.08-2.1
not sure have done rigth
showing about system number 2 my RTX 3070 Mobile gpu not show rigth there llvmpipe
How can change that, are new on linux
You have no Nvidia drivers installed at all.
Lets start with the basicsā¦step by stepā¦
Show your repo list via zypper lr -d. Do not write down the output manually. Simply copy and paste it here in the forum via the preformatted text tags </> in the editor.
skriv eller # | Alias | Name | Enabled | GPG Check | Refresh | Keep | Priority | Type | URI | Service
--+----------------------------+-------------------+---------+-----------+---------+------+----------+--------+------------------------------------------------------------------------------+---------
1 | NVIDIA | NVIDIA | Ja | (r ) Ja | Ja | - | 99 | rpm-md | https://download.nvidia.com/opensuse/tumbleweed |
2 | NVIDIA:repo-non-free | repo-non-free | Ja | (r ) Ja | Ja | - | 99 | rpm-md | https://download.nvidia.com/opensuse/tumbleweed | NVIDIA
3 | openSUSE:repo-non-oss | repo-non-oss | Ja | (r ) Ja | Ja | - | 99 | rpm-md | http://cdn.opensuse.org/tumbleweed/repo/non-oss | openSUSE
4 | openSUSE:repo-openh264 | repo-openh264 | Ja | (r ) Ja | Ja | - | 99 | rpm-md | http://codecs.opensuse.org/openh264/openSUSE_Tumbleweed | openSUSE
5 | openSUSE:repo-oss | repo-oss | Ja | (r ) Ja | Ja | - | 99 | rpm-md | http://cdn.opensuse.org/tumbleweed/repo/oss | openSUSE
6 | openSUSE:repo-oss-debug | repo-oss-debug | Nej | ---- | ---- | - | 99 | N/A | http://cdn.opensuse.org/debug/tumbleweed/repo/oss | openSUSE
7 | openSUSE:repo-oss-source | repo-oss-source | Nej | ---- | ---- | - | 99 | N/A | http://cdn.opensuse.org/source/tumbleweed/repo/oss | openSUSE
8 | openSUSE:update-tumbleweed | update-tumbleweed | Ja | (r ) Ja | Ja | - | 99 | rpm-md | http://cdn.opensuse.org/update/tumbleweed | openSUSE
9 | snappy | snappy | Ja | ( p) Ja | Ja | - | 99 | N/A | https://download.opensuse.org/repositories/system:/snappy/openSUSE_Leap_15.5 | klistra in din kod hƤr