No Wifi on Leap

I bought an HP laptop and I put OpenSUSE Leap on it. I get internet when I connect it by cable but no wifi. I ran the following

/usr/sbin/hwinfo --netcard

20: PCI 200.0: 0280 Network controller
[Created at pci.378]
Unique ID: B35A.qRNrg88_gN6
Parent ID: HnsE.X71GJeuFW40
SysFS ID: /devices/pci0000:00/0000:00:1c.5/0000:02:00.0
SysFS BusID: 0000:02:00.0
Hardware Class: network
Model: “Realtek Network controller”
Vendor: pci 0x10ec “Realtek Semiconductor Co., Ltd.”
Device: pci 0xd723
SubVendor: pci 0x103c “Hewlett-Packard Company”
SubDevice: pci 0x8319
I/O Ports: 0x3000-0x3fff (rw)
Memory Range: 0xb1000000-0xb100ffff (rw,non-prefetchable)
IRQ: 255 (no events)
Module Alias: “pci:v000010ECd0000D723sv0000103Csd00008319bc02sc80i00”
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #22 (PCI bridge)

24: PCI 100.0: 0200 Ethernet controller
[Created at pci.378]
Unique ID: rBUF.goUPQligci2
Parent ID: z8Q3.0j4Wq3nY_hF
SysFS ID: /devices/pci0000:00/0000:00:1c.0/0000:01:00.0
SysFS BusID: 0000:01:00.0
Hardware Class: network
Model: “Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller”
Vendor: pci 0x10ec “Realtek Semiconductor Co., Ltd.”
Device: pci 0x8168 “RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller”
SubVendor: pci 0x103c “Hewlett-Packard Company”
SubDevice: pci 0x84b2
Revision: 0x15
Driver: “r8169”
Driver Modules: “r8169”
Device File: eth0
I/O Ports: 0x4000-0x4fff (rw)
Memory Range: 0xb1104000-0xb1104fff (rw,non-prefetchable)
Memory Range: 0xb1100000-0xb1103fff (rw,non-prefetchable)
IRQ: 127 (28350 events)
HW Address: e4:e7:49:14:22:32
Permanent HW Address: e4:e7:49:14:22:32
Link detected: yes
Module Alias: “pci:v000010ECd00008168sv0000103Csd000084B2bc02sc00i00”
Driver Info #0:
Driver Status: r8169 is active
Driver Activation Cmd: “modprobe r8169”
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #16 (PCI bridge)

I would appreciate any help. Im not sure what to do next.

You need out-of-tree rtl8723de driver for it. One possibility is to try package from openSUSE Software. Otherwise build it yourself from https://github.com/lwfinger/rtlwifi_new/tree/extended (note that driver is in “extended” branch).

Post:

uname -a

Because on that, it depends which driver is needed:

Its the same as arvidjaar mentioned, but packed as rpm:

You need out-of-tree rtl8723de driver for it. One possibility is to try package from openSUSE Software. Otherwise build it yourself from https://github.com/lwfinger/rtlwifi_new/tree/extended (note that driver is in “extended” branch).