No NVIDIA driver active after installation...

Hello community,

I have finished installing openSUSE 13.2 in my laptop and after doing all the updated and the NVIDIA driver, after reboot, the driver dosen’t work. When i open the NVIDIA driver Settings it shows an error that is not activated and a message to configure the file in the terminal. This same error shown is Leap 42.1.
The NVIDIA is a GForce 920M (not the old 9200M) in an Asus X552MJ that came with W10.

How can i activate the driver?

Thanks for the help…

Optimus system, i.e. hybrid intel+nvidia graphics?
Then you cannot use the standard nvidia driver as it does not support that.

Please post your /var/log/Xorg.0.log and/or the output of “glxinfo|grep render” (you may have to install Mesa-demo-x first) to clarify.

Yes i think is a hybrid intel+nvidia graphics. In W10 the Intel one controls the display/efects of the desktop even with the nvidia driver installed.
Here is the Xorg.0 log part1: (I installed Mesa-demo-x)

13285.524]
X.Org X Server 1.16.1
Release Date: 2014-09-21
13285.524] X Protocol Version 11, Revision 0
13285.524] Build Operating System: openSUSE SUSE LINUX
13285.524] Current Operating System: Linux OptimusPrime.Hub 3.16.7-32-desktop #1 SMP PREEMPT Wed Jan 20 14:05:33 UTC 2016 (d4df98a) x86_64
13285.524] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.7-32-desktop root=UUID=7e4b0c86-3245-44f4-b96b-3f039d7638d6 ro splash=silent quiet showopts vga=0x31b
13285.524] Build Date: 08 February 2016 10:43:38AM
13285.524]
13285.524] Current version of pixman: 0.32.6
13285.524] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
13285.524] Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
13285.525] (==) Log file: “/var/log/Xorg.0.log”, Time: Fri Feb 19 21:33:09 2016
13285.577] (==) Using config directory: “/etc/X11/xorg.conf.d”
13285.577] (==) Using system config directory “/usr/share/X11/xorg.conf.d”
13285.578] (==) No Layout section. Using the first Screen section.
13285.578] (==) No screen section available. Using defaults.
13285.578] (
) |–>Screen “Default Screen Section” (0)
13285.578] (**) | |–>Monitor “<default monitor>”
13285.578] (==) No monitor specified for screen “Default Screen Section”.
Using a default monitor configuration.
13285.578] (==) Automatically adding devices
13285.578] (==) Automatically enabling devices
13285.578] (==) Automatically adding GPU devices
13285.641] (WW) The directory “/usr/share/fonts/misc/sgi” does not exist.
13285.641] Entry deleted from font path.
13285.642] (==) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/ghostscript/,
/usr/share/fonts/cyrillic:unscaled,
/usr/share/fonts/truetype/,
built-ins
13285.642] (==) ModulePath set to “/usr/lib64/xorg/modules”
13285.642] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
13285.642] (II) Loader magic: 0x80ec80
13285.642] (II) Module ABI versions:
13285.642] X.Org ANSI C Emulation: 0.4
13285.642] X.Org Video Driver: 18.0
13285.642] X.Org XInput driver : 21.0
13285.642] X.Org Server Extension : 8.0
13285.642] (II) xfree86: Adding drm device (/dev/dri/card0)
13285.643] (II) xfree86: Adding drm device (/dev/dri/card1)
13285.644] (–) PCI:*(0:0:2:0) 8086:0f31:1043:176d rev 14, Mem @ 0xc3400000/4194304, 0xa0000000/268435456, I/O @ 0x0000f080/8
13285.645] (–) PCI: (0:1:0:0) 10de:1299:1043:176d rev 161, Mem @ 0xc2000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x???/524288
13285.645] (II) LoadModule: “glx”
13285.645] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
13285.647] (II) Module glx: vendor=“X.Org Foundation”
13285.647] compiled for 1.16.1, module version = 1.0.0
13285.647] ABI class: X.Org Server Extension, version 8.0
13285.647] (==) AIGLX enabled
13285.647] (==) Matched intel as autoconfigured driver 0
13285.647] (==) Matched nvidia as autoconfigured driver 1
13285.647] (==) Matched nouveau as autoconfigured driver 2
13285.648] (==) Matched nv as autoconfigured driver 3
13285.648] (==) Matched intel as autoconfigured driver 4
13285.648] (==) Matched modesetting as autoconfigured driver 5
13285.648] (==) Matched fbdev as autoconfigured driver 6
13285.648] (==) Matched vesa as autoconfigured driver 7
13285.648] (==) Assigned the driver to the xf86ConfigLayout
13285.648] (II) LoadModule: “intel”
13285.648] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
13285.683] (II) Module intel: vendor=“X.Org Foundation”
13285.683] compiled for 1.16.1, module version = 2.99.916
13285.683] Module class: X.Org Video Driver
13285.683] ABI class: X.Org Video Driver, version 18.0
13285.683] (II) LoadModule: “nvidia”
13285.683] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
13285.799] (II) Module nvidia: vendor=“NVIDIA Corporation”
13285.799] compiled for 4.0.2, module version = 1.0.0
13285.799] Module class: X.Org Video Driver
13285.799] (II) LoadModule: “nouveau”
13285.799] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
13285.817] (II) Module nouveau: vendor=“X.Org Foundation”
13285.817] compiled for 1.16.1, module version = 1.0.11
13285.817] Module class: X.Org Video Driver
13285.817] ABI class: X.Org Video Driver, version 18.0
13285.817] (II) LoadModule: “nv”
13285.818] (II) Loading /usr/lib64/xorg/modules/drivers/nv_drv.so
13285.835] (II) Module nv: vendor=“X.Org Foundation”
13285.835] compiled for 1.16.1, module version = 2.1.20
13285.835] Module class: X.Org Video Driver
13285.835] ABI class: X.Org Video Driver, version 18.0
13285.835] (II) LoadModule: “modesetting”
13285.836] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
13285.847] (II) Module modesetting: vendor=“X.Org Foundation”
13285.847] compiled for 1.16.1, module version = 0.9.0
13285.847] Module class: X.Org Video Driver
13285.847] ABI class: X.Org Video Driver, version 18.0
13285.847] (II) LoadModule: “fbdev”
13285.848] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
13285.850] (II) Module fbdev: vendor=“X.Org Foundation”
13285.850] compiled for 1.16.1, module version = 0.4.4
13285.850] Module class: X.Org Video Driver
13285.850] ABI class: X.Org Video Driver, version 18.0
13285.850] (II) LoadModule: “vesa”
13285.851] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
13285.853] (II) Module vesa: vendor=“X.Org Foundation”
13285.853] compiled for 1.16.1, module version = 2.3.3
13285.853] Module class: X.Org Video Driver
13285.853] ABI class: X.Org Video Driver, version 18.0
13285.853] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
13285.857] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
13285.857] (II) intel: Driver for Intel(R) Iris™ Graphics: 5100, 6100
13285.857] (II) intel: Driver for Intel(R) Iris™ Pro Graphics: 5200, 6200, P6300
13285.857] (II) NVIDIA dlloader X Driver 352.79 Wed Jan 13 15:31:15 PST 2016
13285.857] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
13285.857] (II) NOUVEAU driver
13285.858] (II) NOUVEAU driver for NVIDIA chipset families :
13285.858] RIVA TNT (NV04)
13285.858] RIVA TNT2 (NV05)
13285.858] GeForce 256 (NV10)
13285.859] GeForce 2 (NV11, NV15)
13285.859] GeForce 4MX (NV17, NV18)
13285.859] GeForce 3 (NV20)
13285.859] GeForce 4Ti (NV25, NV28)
13285.860] GeForce FX (NV3x)
13285.860] GeForce 6 (NV4x)
13285.860] GeForce 7 (G7x)
13285.861] GeForce 8 (G8x)
13285.861] GeForce GTX 200 (NVA0)
13285.861] GeForce GTX 400 (NVC0)
13285.861] (II) NOUVEAU driver
13285.861] (II) NOUVEAU driver for NVIDIA chipset families :
13285.861] RIVA TNT (NV04)
13285.862] RIVA TNT2 (NV05)
13285.862] GeForce 256 (NV10)
13285.862] GeForce 2 (NV11, NV15)
13285.863] GeForce 4MX (NV17, NV18)
13285.863] GeForce 3 (NV20)
13285.863] GeForce 4Ti (NV25, NV28)
13285.864] GeForce FX (NV3x)
13285.864] GeForce 6 (NV4x)
13285.864] GeForce 7 (G7x)
13285.864] GeForce 8 (G8x)
13285.865] GeForce GTX 200 (NVA0)
13285.865] GeForce GTX 400 (NVC0)
13285.865] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
13285.865] (II) FBDEV: driver for framebuffer: fbdev
13285.865] (II) VESA: driver for VESA chipsets: vesa
13285.866] (++) using VT number 7

13285.866] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
13285.868] (EE) [drm] KMS not enabled
13285.869] (EE) [drm] KMS not enabled
13285.869] (WW) Falling back to old probe method for modesetting
13285.869] (WW) Falling back to old probe method for fbdev
13285.869] (II) Loading sub module “fbdevhw”
13285.869] (II) LoadModule: “fbdevhw”
13285.871] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
13285.892] (II) Module fbdevhw: vendor=“X.Org Foundation”
13285.892] compiled for 1.16.1, module version = 0.0.2
13285.892] ABI class: X.Org Video Driver, version 18.0
13285.892] (WW) Falling back to old probe method for vesa
13285.894] (–) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
13285.894] (–) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2
13285.895] (II) intel(0): Creating default Display subsection in Screen section

Xorg.0 log Part2:

“Default Screen Section” for depth/fbbpp 24/32
13285.895] (==) intel(0): Depth 24, (–) framebuffer bpp 32
13285.895] (==) intel(0): RGB weight 888
13285.895] (==) intel(0): Default visual is TrueColor
13285.896] (II) intel(0): Output eDP1 has no monitor section
13285.897] (–) intel(0): Found backlight control interface intel_backlight (type ‘raw’) for output eDP1
13285.897] (II) intel(0): Enabled output eDP1
13285.897] (II) intel(0): Output VGA1 has no monitor section
13285.897] (II) intel(0): Enabled output VGA1
13285.897] (II) intel(0): Output HDMI1 has no monitor section
13285.898] (II) intel(0): Enabled output HDMI1
13285.898] (II) intel(0): Output DP1 has no monitor section
13285.898] (II) intel(0): Enabled output DP1
13285.898] (II) intel(0): Output HDMI2 has no monitor section
13285.898] (II) intel(0): Enabled output HDMI2
13285.898] (–) intel(0): Using a maximum size of 256x256 for hardware cursors
13285.899] (II) intel(0): Output VIRTUAL1 has no monitor section
13285.899] (II) intel(0): Enabled output VIRTUAL1
13285.899] (–) intel(0): Output eDP1 using initial mode 1366x768 on pipe 0
13285.899] (==) intel(0): TearFree disabled
13285.899] (==) intel(0): DPI set to (96, 96)
13285.899] (II) Loading sub module “dri2”
13285.899] (II) LoadModule: “dri2”
13285.900] (II) Module “dri2” already built-in
13285.900] (II) Loading sub module “present”
13285.900] (II) LoadModule: “present”
13285.900] (II) Module “present” already built-in
13285.900] (II) UnloadModule: “nvidia”
13285.900] (II) Unloading nvidia
13285.901] (II) UnloadModule: “fbdev”
13285.901] (II) Unloading fbdev
13285.901] (II) UnloadSubModule: “fbdevhw”
13285.901] (II) Unloading fbdevhw
13285.902] (II) UnloadModule: “vesa”
13285.902] (II) Unloading vesa
13285.902] (==) Depth 24 pixmap format is 32 bpp
13285.903] (II) intel(0): SNA initialized with Baytrail (gen7) backend
13285.903] (==) intel(0): Backing store enabled
13285.903] (==) intel(0): Silken mouse enabled
13285.903] (II) intel(0): HW Cursor enabled
13285.904] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
13285.905] (==) intel(0): DPMS enabled
13285.905] (II) intel(0): [DRI2] Setup complete
13285.905] (II) intel(0): [DRI2] DRI driver: i965
13285.905] (II) intel(0): [DRI2] VDPAU driver: i965
13285.905] (II) intel(0): direct rendering: DRI2 enabled
13285.905] (II) intel(0): hardware support for Present enabled
13285.906] (==) intel(0): display hotplug detection enabled
13285.906] (–) RandR disabled
13286.020] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
13286.020] (II) AIGLX: enabled GLX_ARB_create_context
13286.020] (II) AIGLX: enabled GLX_ARB_create_context_profile
13286.020] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
13286.020] (II) AIGLX: enabled GLX_INTEL_swap_event
13286.020] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
13286.020] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
13286.020] (II) AIGLX: enabled GLX_ARB_fbconfig_float
13286.020] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
13286.020] (II) AIGLX: enabled GLX_ARB_create_context_robustness
13286.020] (II) AIGLX: Loaded and initialized i965
13286.020] (II) GLX: Initialized DRI2 GL provider for screen 0
13286.027] (II) intel(0): switch to mode 1366x768@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
13286.041] (II) intel(0): Setting screen physical size to 361 x 203
13286.554] (II) config/udev: Adding input device Power Button (/dev/input/event5)
13286.555] () Power Button: Applying InputClass “evdev keyboard catchall”
13286.555] (
) Power Button: Applying InputClass “system-keyboard”
13286.555] () Power Button: Applying InputClass “evdev keyboard catchall”
13286.555] (II) LoadModule: “evdev”
13286.556] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
13286.558] (II) Module evdev: vendor=“X.Org Foundation”
13286.559] compiled for 1.16.1, module version = 2.9.0
13286.559] Module class: X.Org XInput Driver
13286.559] ABI class: X.Org XInput driver, version 21.0
13286.559] (II) Using input driver ‘evdev’ for ‘Power Button’
13286.559] (
) Power Button: always reports core events
13286.559] () evdev: Power Button: Device: “/dev/input/event5”
13286.560] (–) evdev: Power Button: Vendor 0 Product 0x1
13286.560] (–) evdev: Power Button: Found keys
13286.560] (II) evdev: Power Button: Configuring as keyboard
13286.560] (
) Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input12/event5”
13286.560] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD, id 6)
13286.560] () Option “xkb_rules” “evdev”
13286.560] (
) Option “xkb_model” “pc105”
13286.561] () Option “xkb_layout” “pt”
13286.561] (
) Option “xkb_options” “terminate:ctrl_alt_bksp”
13286.729] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
13286.729] () Video Bus: Applying InputClass “evdev keyboard catchall”
13286.729] (
) Video Bus: Applying InputClass “system-keyboard”
13286.729] () Video Bus: Applying InputClass “evdev keyboard catchall”
13286.729] (II) Using input driver ‘evdev’ for ‘Video Bus’
13286.729] (
) Video Bus: always reports core events
13286.729] () evdev: Video Bus: Device: “/dev/input/event7”
13286.729] (–) evdev: Video Bus: Vendor 0 Product 0x6
13286.729] (–) evdev: Video Bus: Found keys
13286.729] (II) evdev: Video Bus: Configuring as keyboard
13286.729] (
) Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14/event7”
13286.729] (II) XINPUT: Adding extended input device “Video Bus” (type: KEYBOARD, id 7)
13286.729] () Option “xkb_rules” “evdev”
13286.730] (
) Option “xkb_model” “pc105”
13286.730] () Option “xkb_layout” “pt”
13286.730] (
) Option “xkb_options” “terminate:ctrl_alt_bksp”
13286.731] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
13286.731] () Video Bus: Applying InputClass “evdev keyboard catchall”
13286.732] (
) Video Bus: Applying InputClass “system-keyboard”
13286.732] () Video Bus: Applying InputClass “evdev keyboard catchall”
13286.732] (II) Using input driver ‘evdev’ for ‘Video Bus’
13286.732] (
) Video Bus: always reports core events
13286.732] () evdev: Video Bus: Device: “/dev/input/event8”
13286.732] (–) evdev: Video Bus: Vendor 0 Product 0x6
13286.732] (–) evdev: Video Bus: Found keys
13286.732] (II) evdev: Video Bus: Configuring as keyboard
13286.732] (
) Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:44/LNXVIDEO:01/input/input15/event8”
13286.732] (II) XINPUT: Adding extended input device “Video Bus” (type: KEYBOARD, id 8)
13286.732] () Option “xkb_rules” “evdev”
13286.732] (
) Option “xkb_model” “pc105”
13286.732] () Option “xkb_layout” “pt”
13286.732] (
) Option “xkb_options” “terminate:ctrl_alt_bksp”
13286.734] (II) config/udev: Adding input device Power Button (/dev/input/event2)
13286.734] () Power Button: Applying InputClass “evdev keyboard catchall”
13286.734] (
) Power Button: Applying InputClass “system-keyboard”

Xorg.0 log Part3:

13286.734] () Power Button: Applying InputClass “evdev keyboard catchall”
13286.734] (II) Using input driver ‘evdev’ for ‘Power Button’
13286.734] (
) Power Button: always reports core events
13286.734] () evdev: Power Button: Device: “/dev/input/event2”
13286.734] (–) evdev: Power Button: Vendor 0 Product 0x1
13286.734] (–) evdev: Power Button: Found keys
13286.734] (II) evdev: Power Button: Configuring as keyboard
13286.734] (
) Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input9/event2”
13286.735] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD, id 9)
13286.735] () Option “xkb_rules” “evdev”
13286.735] (
) Option “xkb_model” “pc105”
13286.735] () Option “xkb_layout” “pt”
13286.735] (
) Option “xkb_options” “terminate:ctrl_alt_bksp”
13286.736] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
13286.736] (II) No input driver specified, ignoring this device.
13286.736] (II) This device may have been added with another device file.
13286.737] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
13286.737] () Sleep Button: Applying InputClass “evdev keyboard catchall”
13286.737] (
) Sleep Button: Applying InputClass “system-keyboard”
13286.737] () Sleep Button: Applying InputClass “evdev keyboard catchall”
13286.737] (II) Using input driver ‘evdev’ for ‘Sleep Button’
13286.737] (
) Sleep Button: always reports core events
13286.737] () evdev: Sleep Button: Device: “/dev/input/event4”
13286.737] (–) evdev: Sleep Button: Vendor 0 Product 0x3
13286.737] (–) evdev: Sleep Button: Found keys
13286.738] (II) evdev: Sleep Button: Configuring as keyboard
13286.738] (
) Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input11/event4”
13286.738] (II) XINPUT: Adding extended input device “Sleep Button” (type: KEYBOARD, id 10)
13286.738] () Option “xkb_rules” “evdev”
13286.738] (
) Option “xkb_model” “pc105”
13286.738] () Option “xkb_layout” “pt”
13286.738] (
) Option “xkb_options” “terminate:ctrl_alt_bksp”
13286.740] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event6)
13286.740] () Logitech USB Optical Mouse: Applying InputClass “evdev pointer catchall”
13286.740] (
) Logitech USB Optical Mouse: Applying InputClass “evdev pointer catchall”
13286.740] (II) Using input driver ‘evdev’ for ‘Logitech USB Optical Mouse’
13286.740] () Logitech USB Optical Mouse: always reports core events
13286.740] (
) evdev: Logitech USB Optical Mouse: Device: “/dev/input/event6”
13286.741] (–) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc077
13286.741] (–) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
13286.741] (–) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
13286.741] (–) evdev: Logitech USB Optical Mouse: Found relative axes
13286.741] (–) evdev: Logitech USB Optical Mouse: Found x and y relative axes
13286.741] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
13286.741] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
13286.741] () evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
13286.741] (
) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
13286.741] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C077.0001/input/input13/event6”
13286.741] (II) XINPUT: Adding extended input device “Logitech USB Optical Mouse” (type: MOUSE, id 11)
13286.741] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
13286.742] (
) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
13286.742] () Logitech USB Optical Mouse: (accel) acceleration profile 0
13286.742] (
) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
13286.742] () Logitech USB Optical Mouse: (accel) acceleration threshold: 4
13286.743] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse1)
13286.743] (II) No input driver specified, ignoring this device.
13286.743] (II) This device may have been added with another device file.
13286.744] (II) config/udev: Adding input device USB2.0 VGA UVC WebCam (/dev/input/event11)
13286.744] (
) USB2.0 VGA UVC WebCam: Applying InputClass “evdev keyboard catchall”
13286.744] () USB2.0 VGA UVC WebCam: Applying InputClass “system-keyboard”
13286.744] (
) USB2.0 VGA UVC WebCam: Applying InputClass “evdev keyboard catchall”
13286.744] (II) Using input driver ‘evdev’ for ‘USB2.0 VGA UVC WebCam’
13286.744] () USB2.0 VGA UVC WebCam: always reports core events
13286.744] (
) evdev: USB2.0 VGA UVC WebCam: Device: “/dev/input/event11”
13286.744] (–) evdev: USB2.0 VGA UVC WebCam: Vendor 0x4f2 Product 0xb48c
13286.744] (–) evdev: USB2.0 VGA UVC WebCam: Found keys
13286.744] (II) evdev: USB2.0 VGA UVC WebCam: Configuring as keyboard
13286.744] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input18/event11”
13286.744] (II) XINPUT: Adding extended input device “USB2.0 VGA UVC WebCam” (type: KEYBOARD, id 12)
13286.744] (
) Option “xkb_rules” “evdev”
13286.744] () Option “xkb_model” “pc105”
13286.745] (
) Option “xkb_layout” “pt”
13286.745] () Option “xkb_options” “terminate:ctrl_alt_bksp”
13286.746] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
13286.746] (II) No input driver specified, ignoring this device.
13286.746] (II) This device may have been added with another device file.
13286.746] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
13286.747] (II) No input driver specified, ignoring this device.
13286.747] (II) This device may have been added with another device file.
13286.747] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event10)
13286.747] (
) Asus WMI hotkeys: Applying InputClass “evdev keyboard catchall”
13286.748] () Asus WMI hotkeys: Applying InputClass “system-keyboard”
13286.748] (
) Asus WMI hotkeys: Applying InputClass “evdev keyboard catchall”
13286.748] (II) Using input driver ‘evdev’ for ‘Asus WMI hotkeys’
13286.748] () Asus WMI hotkeys: always reports core events
13286.748] (
) evdev: Asus WMI hotkeys: Device: “/dev/input/event10”
13286.748] (–) evdev: Asus WMI hotkeys: Vendor 0 Product 0
13286.748] (–) evdev: Asus WMI hotkeys: Found keys
13286.748] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
13286.748] () Option “config_info” “udev:/sys/devices/platform/asus-nb-wmi/input/input17/event10”
13286.748] (II) XINPUT: Adding extended input device “Asus WMI hotkeys” (type: KEYBOARD, id 13)
13286.748] (
) Option “xkb_rules” “evdev”
13286.748] () Option “xkb_model” “pc105”
13286.748] (
) Option “xkb_layout” “pt”
13286.748] () Option “xkb_options” “terminate:ctrl_alt_bksp”
13286.749] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
13286.750] (
) AT Translated Set 2 keyboard: Applying InputClass “evdev keyboard catchall”
13286.750] () AT Translated Set 2 keyboard: Applying InputClass “system-keyboard”
13286.750] (
) AT Translated Set 2 keyboard: Applying InputClass “evdev keyboard catchall”
13286.750] (II) Using input driver ‘evdev’ for ‘AT Translated Set 2 keyboard’
13286.750] () AT Translated Set 2 keyboard: always reports core events
13286.750] (
) evdev: AT Translated Set 2 keyboard: Device: “/dev/input/event0”
13286.750] (–) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
13286.750] (–) evdev: AT Translated Set 2 keyboard: Found keys
13286.750] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
13286.750] () Option “config_info” “udev:/sys/devices/platform/i8042/serio0/input/input0/event0”
13286.750] (II) XINPUT: Adding extended input device “AT Translated Set 2 keyboard” (type: KEYBOARD, id 14)
13286.750] (
) Option “xkb_rules” “evdev”
13286.750] () Option “xkb_model” “pc105”
13286.750] (
) Option “xkb_layout” “pt”
13286.750] () Option “xkb_options” “terminate:ctrl_alt_bksp”
13286.752] (II) config/udev: Adding input device PS/2 FocalTech FocalTech Touchpad in mouse emulation mode (/dev/input/event1)
13286.752] (
) PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: Applying InputClass “evdev pointer catchall”
13286.752] () PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: Applying InputClass “evdev pointer catchall”
13286.752] (II) Using input driver ‘evdev’ for ‘PS/2 FocalTech FocalTech Touchpad in mouse emulation mode’
13286.752] (
) PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: always reports core events
13286.752] () evdev: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: Device: “/dev/input/event1”
13286.752] (–) evdev: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: Vendor 0x2 Product 0x1
13286.752] (–) evdev: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: Found 3 mouse buttons
13286.752] (–) evdev: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: Found relative axes
13286.752] (–) evdev: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: Found x and y relative axes
13286.752] (II) evdev: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: Configuring as mouse
13286.752] (
) evdev: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: YAxisMapping: buttons 4 and 5
13286.752] () evdev: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
13286.752] (
) Option “config_info” “udev:/sys/devices/platform/i8042/serio4/input/input8/event1”
13286.752] (II) XINPUT: Adding extended input device “PS/2 FocalTech FocalTech Touchpad in mouse emulation mode” (type: MOUSE, id 15)
13286.753] (II) evdev: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: initialized for relative axes.
13286.753] () PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: (accel) keeping acceleration scheme 1
13286.753] (
) PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: (accel) acceleration profile 0
13286.753] () PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: (accel) acceleration factor: 2.000
13286.753] (
) PS/2 FocalTech FocalTech Touchpad in mouse emulation mode: (accel) acceleration threshold: 4
13286.754] (II) config/udev: Adding input device PS/2 FocalTech FocalTech Touchpad in mouse emulation mode (/dev/input/mouse0)
13286.754] (II) No input driver specified, ignoring this device.
13286.754] (II) This device may have been added with another device file.
13286.754] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
13286.754] (II) No input driver specified, ignoring this device.
13286.754] (II) This device may have been added with another device file.
19571.636] (II) intel(0): EDID vendor “CMO”, prod id 5543
19571.636] (II) intel(0): Printing DDC gathered Modelines:
19571.636] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)

First thing remove the NVIDIA driver. It breaks things on a Optimus laptop.

Either install bumblebee

https://en.opensuse.org/SDB:NVIDIA_Bumblebee

or follow instruction here for a bit more experimental approach

https://forums.opensuse.org/showthread.php/512260-Leap-42-1-Optimus-system-with-nvidia-prime-instead-of-bumblebee

Right.
The system is running on the intel chip, so it’s clear that the nvidia driver does not work/is not active.

To use the nvidia chip you need Bumblebee or prime as mentioned.

Or, if you can disable the intel chip in your BIOS settings, that would be an option too.
Then the standard nvidia driver should work.

Sorry for the delay,

The only option that i have in the bios is “Intel Virtualisation Technology” is that it or should be another one to disable the intel chip?
Funny even with the drivers everything worked but the nvidia settings, even so i removed it.

Does this tutorial works in Leap? (SDB:NVIDIA Bumblebee - openSUSE Wiki) I removed 13.2. Will i have better performance with the nvidia chip enebled or will be the sameP 'Cause the way the system is working, the animations are buggy and not accurate in the appearance. For example, when i open the calendar it shows a blur first an then the animation with the calendar. Same goes to the rest in the taskbar.

Thanks