i cant get a display, but it works with hdmi just fine. In display menu i can change to landscape for my main display but it wont work and when i xrandr -o right i get an error.
X error of failed request: BadMatch (invalid parameter attributes)
Major Opcode of failed request: 140 (RANDR)
Major Opcode of failed request: 2
(RRSetScreenConfig)
Serial number of failed request: 14
Current Serial Number in Output Stream: 14```00:00.0 Host bridge: Intel Corporation Device 461c
DeviceName: Onboard - Other
Subsystem: Intel Corporation Device 7270
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
00:02.0 VGA compatible controller: Intel Corporation Alder Lake-N [UHD Graphics] (prog-if 00 [VGA controller])
DeviceName: Onboard - Video
Subsystem: Intel Corporation Device 7270
Flags: bus master, fast devsel, latency 0, IRQ 127
Memory at 6000000000 (64-bit, non-prefetchable) [size=16M]
Memory at 4000000000 (64-bit, prefetchable) [size=256M]
I/O ports at 5000 [size=64]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:0a.0 Signal processing controller: Intel Corporation Platform Monitoring Technology (rev 01)
DeviceName: Onboard - Other
Subsystem: Intel Corporation Device 7270
Flags: fast devsel
Memory at 6001120000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: intel_vsec
Kernel modules: intel_vsec
00:0d.0 USB controller: Intel Corporation Device 464e (prog-if 30 [XHCI])
DeviceName: Onboard - Other
Subsystem: Intel Corporation Device 7270
Flags: bus master, medium devsel, latency 0, IRQ 125
Memory at 6001110000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.0 USB controller: Intel Corporation Device 54ed (prog-if 30 [XHCI])
DeviceName: Onboard - Other
Subsystem: Intel Corporation Device 7270
Flags: bus master, medium devsel, latency 0, IRQ 126
Memory at 6001100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 RAM memory: Intel Corporation Device 54ef
DeviceName: Onboard - Other
Subsystem: Intel Corporation Device 7270
Flags: fast devsel
Memory at 600112c000 (64-bit, non-prefetchable) [disabled] [size=16K]
Memory at 6001134000 (64-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: <access denied>
00:15.0 Serial bus controller: Intel Corporation Device 54e8
DeviceName: Onboard - Other
Subsystem: Intel Corporation Device 7270
Flags: bus master, fast devsel, latency 0, IRQ 27
Memory at 4017000000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:15.3 Serial bus controller: Intel Corporation Device 54eb
DeviceName: Onboard - Other
Subsystem: Intel Corporation Device 7270
Flags: bus master, fast devsel, latency 0, IRQ 33
Memory at 4017001000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:16.0 Communication controller: Intel Corporation Device 54e0
DeviceName: Onboard - Other
Subsystem: Intel Corporation Device 7270
Flags: bus master, fast devsel, latency 0, IRQ 128
Memory at 6001131000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 SATA controller: Intel Corporation Device 54d3 (prog-if 01 [AHCI 1.0])
DeviceName: Onboard - SATA
Subsystem: Intel Corporation Device 7270
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 124
Memory at 80600000 (32-bit, non-prefetchable) [size=8K]
Memory at 80603000 (32-bit, non-prefetchable) [size=256]
I/O ports at 5090 [size=8]
I/O ports at 5080 [size=4]
I/O ports at 5060 [size=32]
Memory at 80602000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1c.0 PCI bridge: Intel Corporation Device 54ba (prog-if 00 [Normal decode])
Subsystem: Intel Corporation Device 7270
Flags: bus master, fast devsel, latency 0, IRQ 122
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 4000-4fff [size=4K] [16-bit]
Memory behind bridge: 80500000-805fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.6 PCI bridge: Intel Corporation Device 54be (prog-if 00 [Normal decode])
Subsystem: Intel Corporation Device 7270
Flags: bus master, fast devsel, latency 0, IRQ 123
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 3000-3fff [size=4K] [16-bit]
Memory behind bridge: 80400000-804fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge: Intel Corporation Device 5481
DeviceName: Onboard - Other
Subsystem: Intel Corporation Device 7270
Flags: bus master, fast devsel, latency 0
00:1f.3 Audio device: Intel Corporation Device 54c8
DeviceName: Onboard - Sound
Subsystem: Intel Corporation Device 7270
Flags: bus master, fast devsel, latency 32, IRQ 130
Memory at 6001128000 (64-bit, non-prefetchable) [size=16K]
Memory at 6001000000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_sof_pci_intel_tgl
00:1f.4 SMBus: Intel Corporation Device 54a3
DeviceName: Onboard - Other
Subsystem: Intel Corporation Device 7270
Flags: medium devsel, IRQ 16
Memory at 6001130000 (64-bit, non-prefetchable) [size=256]
I/O ports at efa0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.5 Serial bus controller: Intel Corporation Device 54a4
DeviceName: Onboard - Other
Subsystem: Intel Corporation Device 7270
Flags: fast devsel
Memory at 80604000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: intel-spi
Kernel modules: spi_intel_pci
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
Subsystem: Realtek Semiconductor Co., Ltd. Device 0123
Flags: bus master, fast devsel, latency 0, IRQ 18
I/O ports at 4000 [size=256]
Memory at 80504000 (64-bit, non-prefetchable) [size=4K]
Memory at 80500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device b852
Subsystem: Realtek Semiconductor Co., Ltd. Device b852
Flags: bus master, fast devsel, latency 0, IRQ 131
I/O ports at 3000 [size=256]
Memory at 80400000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
Kernel driver in use: rtw89_8852be
Kernel modules: rtw89_8852be
What is a koosmile p8? What can “I” not get a “display” from? What works with HDMI just fine? You have provided little useful information.
Please provide complete input/ouput from inxi -GSaz wrapped in code tags.
This is a koosmile p8 I grabbed a link for u hope that helps with that. https://www.amazon.com/gp/aw/d/B0CG9Q37XW?psc=1&ref=ppx_pop_mob_b_asin_image
And my TV works with the HDMI just fine or well so far all TVs and monitors work with HDMI just fine so no problems there.
Oh and I can’t get the display that this device comes with to display anything but a black screen with backlight on. Hope that helps better explain things for u if not let me know and I’ll do what u may or may not need to help and we can work together thanks.
I have and it is a lot of new options I’ve never seen before that aside graphics settings led me to nothing and the BIOS dose have a display settings tab but nothing in the submenu to change at all.
@deathgaze2497 can you post the info @mrmazda requested?
I have a Beelink device running MicroOS/Hyprland but it’s a mini desktop, not a laptop and runs fine on both hdmi outputs…
inxi -GSaz
System:
Kernel: 6.5.9-1-default arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-6.5.9-1-default
root=UUID=89b856ed-8c8d-4b8c-9713-5f907c67e2e3 rd.timeout=60 rd.retry=45
quiet systemd.show_status=yes console=ttyS0,115200 console=tty0
security=selinux selinux=1
Desktop: Hyprland info: waybar vt: 1 dm: N/A Distro: openSUSE MicroOS
Graphics:
Device-1: Intel Alder Lake-N [UHD Graphics] driver: i915 v: kernel
arch: Gen-12.2 process: Intel 10nm built: 2021-22+ ports: active: HDMI-A-1
empty: HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:46d1 class-ID: 0300
Display: wayland server: Xwayland v: 23.2.2 compositor: Hyprland driver:
gpu: i915 display-ID: 1
Monitor-1: HDMI-A-1 model: AAA built: 2012 res: 1920x1080 dpi: 85
size: 575x323mm (22.64x12.72") diag: 660mm (25.96") modes: max: 1920x1080
min: 720x400
API: EGL/GBM Message: No known Wayland EGL/GBM data sources.
here my bad i missed that.
System:
Kernel: 6.5.8-1-default arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-6.5.8-1-default
root=/dev/mapper/system-root splash=silent mitigations=auto quiet
security=apparmor nomodeset
Desktop: KDE Plasma v: 5.27.9 tk: Qt v: 5.15.11 wm: kwin_x11 vt: 2
dm: SDDM Distro: openSUSE Tumbleweed 20231026
Graphics:
Device-1: Intel Alder Lake-N [UHD Graphics] driver: N/A alternate: i915
arch: Gen-12.2 process: Intel 10nm built: 2021-22+ bus-ID: 00:02.0
chip-ID: 8086:46d1 class-ID: 0300
Device-2: icSpring camera driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-3:2 chip-ID: 32e6:9005
class-ID: 0e02
Display: x11 server: X.Org v: 21.1.9 with: Xwayland v: 23.2.2
compositor: kwin_x11 driver: X: loaded: modesetting,vesa unloaded: fbdev
alternate: intel gpu: N/A display-ID: :0 screens: 1
Screen-1: 0 s-res: 800x600 s-dpi: 96 s-size: 211x158mm (8.31x6.22")
s-diag: 264mm (10.38")
Monitor-1: Unknown-1 mapped: None-1 res: 800x600 hz: 60 size: N/A
modes: 800x600
API: OpenGL v: 4.5 Mesa 23.2.1 renderer: llvmpipe (LLVM 17.0.2 256 bits)
direct-render: Yes
also i tried nomodeset at boot and i now at least get a display but its stuck in portrait and no options to change it exist in display manager in wayland session. On X session i do have all my resolutions and changing to any of them dose nothing and its still in portrait mode.
Nomodeset is for making configuration repairs and troubleshooting! It prevents loading of the KMS kernel module required for normal GUI operation with multiple displays, rotations and modes. Inxi while nomodeset is in effect provides limited useful information.
sorry for that hope this helps im no longer using nomodeset and my main display is active as well.
inxi -GSaz
System:
Kernel: 6.5.8-1-default arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-6.5.8-1-default
root=/dev/mapper/system-root splash=silent mitigations=auto quiet
security=apparmor
Desktop: KDE Plasma v: 5.27.9 tk: Qt v: 5.15.11 wm: kwin_x11 vt: 2
dm: SDDM Distro: openSUSE Tumbleweed 20231026
Graphics:
Device-1: Intel Alder Lake-N [UHD Graphics] driver: i915 v: kernel
arch: Gen-12.2 process: Intel 10nm built: 2021-22+ ports:
active: DSI-1,HDMI-A-1 empty: DP-1 bus-ID: 00:02.0 chip-ID: 8086:46d1
class-ID: 0300
Device-2: icSpring camera driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-3:2 chip-ID: 32e6:9005
class-ID: 0e02
Display: x11 server: X.Org v: 21.1.9 with: Xwayland v: 23.2.2
compositor: kwin_x11 driver: X: loaded: modesetting unloaded: fbdev,vesa
alternate: intel dri: iris gpu: i915 display-ID: :0 screens: 1
Screen-1: 0 s-res: 2640x768 s-dpi: 96 s-size: 697x202mm (27.44x7.95")
s-diag: 726mm (28.57")
Monitor-1: DSI-1 pos: left res: 1280x720 hz: 60 size: N/A modes: 800x1280
Monitor-2: HDMI-A-1 mapped: HDMI-1 pos: primary,right model: ELEFW328C
serial: <filter> built: 2018 res: 1360x768 hz: 60 dpi: 49 gamma: 1.2
size: 708x398mm (27.87x15.67") diag: 793mm (31.2") ratio: 16:9 modes:
max: 1360x768 min: 720x400
API: OpenGL v: 4.6 Mesa 23.2.1 renderer: Mesa Intel Graphics (ADL-N)
direct-render: Yes
For anyone interested in what motherboard it is I emailed the company and they said it had no brand that its in house made
I also asked about Linux support this is all they had to say “as for now , Linux still not take the intel N100’s graphic driver , so can not install Linux now.”
So I’ve come to understand its a driver issue for now ergo this
$ journalctl -b | grep -i "drm\|i915\|00:02.0"
Oct 31 13:33:45 user-Default-string kernel: i915 0000:00:02.0: [drm] *ERROR* hback porch < 16 pixels
Oct 31 13:33:45 user-Default-string kernel: i915 0000:00:02.0: [drm] *ERROR* hback porch < 16 pixels
Oct 31 13:34:41 user-Default-string kernel: i915 0000:00:02.0: [drm] *ERROR* hback porch < 16 pixels
Oct 31 13:35:23 user-Default-string kernel: i915 0000:00:02.0: [drm] *ERROR* hback porch < 16 pixels
So if I nomodeset in opensuse tumbleweed I can xrandr right its stuck in a stretched 4:3 800x600 aspect ratio but its atleast usable as far as most things go for now 
This device has been around long enough that it should be supported in TW by now. I would report a bug.
OK I’ll do just that. Would u kindly direct me to the correct place or platform to report it to thank you.
@deathgaze2497 of course it does as per my output… I’ve had it running on single and dual monitor setups without issues (MicroOS/Hyprland).
lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Address sizes: 39 bits physical, 48 bits virtual
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Vendor ID: GenuineIntel
Model name: Intel(R) N100
CPU family: 6
Model: 190
Thread(s) per core: 1
Core(s) per socket: 4
Socket(s): 1
Stepping: 0
CPU(s) scaling MHz: 35%
CPU max MHz: 3400.0000
CPU min MHz: 700.0000
BogoMIPS: 1613.00