Nach Upgrade auf 13.1: Notebook überhitzt

Deutsch (German) Hardware
1

Hallo zusammen,

nach Upgrade von 12.2 incl. AMD legacy Treiber für meine Radeon HD 4800 auf 13.1 mit mitgelieferten Treiber
wird der Rechner sehr heiß und geht nach einigen Minuten aus.
Zuerst konnte ich nicht starten, da hatte wolfi mir schon hier geholfen.
Jetzt gehts, aber das erste Bild “schmilzt” irgendwie zusammen und der Bildschirm wird teilweise weiß.
Dann kommt aber der Anmeldebildschirm.
Mit Mühe (Kaltluftfön) konnte ich jetzt wenigstens die Aktualisierungen einspielen, aber arbeiten kann ich so nicht.
Was muss ich ändern?

2

Tja, ich bin da auch nicht wirklich ein Experte, aber du könntest mal probieren das “Dynamische PowerManagement” einzuschalten.
(beim Kernel in 13.1 ist das standardmäßig noch nicht aktiviert, weil neu).
Dazu einfach “radeon.dpm=1” zu “Optionale Kernel Kommandozeilenparameter” in YaST->System->Bootloader->Bootloader-Option hinzufügen.

Um es nur mal auszuprobieren, ohne das System zu verändern, drücke im Bootmenü die Taste ‘e’, suche die Zeile die mit “linux” beginnt und hänge es dort am Ende an, dann ‘F10’ drücken zum Booten.

Für mehr Informationen, sh. auch hier: http://wiki.ubuntuusers.de/Grafikkarten/AMD/radeon#Stromsparfunktionen

Ansonsten könnte evtl. auch ein neuerer Kernel und/oder radeon Treiber helfen, aber ich würde sagen, probier das einmal aus.

3

Ansonsten könnte evtl. auch ein neuerer Kernel und/oder radeon Treiber helfen, aber ich würde sagen, probier das einmal aus.

Das hat bei meiner Radeon 4550 ca. 5 Grad weniger gebracht, update auf Kernel-Stable.
Bin aber mittlerweile wieder beim 3.11 Kernel und mein Rechner läuft ohne Probleme mehrere Tage am Stück.

Upgrade von 12.2 auf 13.1 ist eigentlich nicht unterstützt aber:
Hast Du vorher den ATI-Treiber (fglrx) deinstalliert?

4

Ja, schon. Darum gings ja in dem von Amalya angesprochenen Thread:
http://forums.opensuse.org/showthread.php/498971-nach-Upgrade-auf-13-1-keine-grafische-Oberfläche?p=2650383#post2650383

Obwohl, da fällt mir ein: es ist ja gar nicht sicher, dass da jetzt wirklich der radeon Treiber benutzt wird. (könnte ja noch irgendein Blacklist oder “nomodeset” übergeblieben sein…)

@Amalya: Kannst du bitte mal die Ausgabe von “glxinfo | grep render” posten (du musst evtl. das Paket “Mesa-demo-X” vorher installieren)? Bzw. die Datei /var/log/Xorg.0.log.
Nur um sicherzugehen.

5

Vielen Dank für eure Hilfe,

ich habe im Yast die Bootloader-Option geändert.
Nach dem Neustart sah zunächst alles normal aus, aber im Anmeldebildschirm fehlt jetzt Windows.
Das muss ich aber wiederhaben.

Die anderen Ausgaben sende ich gleich.

6 
glxinfo | grep render

ergibt

direct rendering: Yes
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.3, 128 bits)
    GL_NV_conditional_render, GL_NV_fog_distance, GL_NV_light_max_exponent,
7 
/var/log/Xorg.0.log

hat zu viele Zeichen, darum hier der erste Teil

       31.057]  
 X.Org X Server 1.12.3  
 Release Date: 2012-07-09  
     31.057] X Protocol Version 11, Revision 0  
     31.057] Build Operating System: openSUSE SUSE LINUX  
     31.057] Current Operating System: Linux linux-f4zw 3.4.11-2.16-desktop #1 SMP PREEMPT Wed Sep 26 17:05:00 UTC 2012 (259fc87) x86_64  
     31.057] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4.11-2.16-desktop root=UUID=bed40cbf-9bfd-4d4c-b2d5-6fb93eeed846 video=1600x900 resume=/dev/disk/by-id/ata-TOSHIBA_MK3263GSXN_103JS3JHS-part5 splash=silent quiet showopts vga=0x317  
     31.057] Build Date: 08 January 2013  11:56:04AM  
     31.057]   
     31.057] Current version of pixman: 0.24.4  
     31.057] 	Before reporting problems, check http://wiki.x.org  
 	to make sure that you have the latest version.  
     31.057] Markers: (--) probed, (**) from config file, (==) default setting,  
 	(++) from command line, (!!) notice, (II) informational,  
 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.  
     31.058] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 17 19:25:32 2013  
     31.058] (==) Using config file: "/etc/X11/xorg.conf"  
     31.058] (==) Using config directory: "/etc/X11/xorg.conf.d"  
     31.058] (==) Using system config directory "/usr/share/X11/xorg.conf.d"  
     31.059] (==) ServerLayout "aticonfig Layout"  
     31.059] (**) |-->Screen "aticonfig-Screen[0]-0" (0)  
     31.059] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"  
     31.059] (**) |   |-->Device "aticonfig-Device[0]-0"  
     31.059] (==) Automatically adding devices  
     31.059] (==) Automatically enabling devices  
     31.059] (WW) The directory "/usr/share/fonts/URW/" does not exist.  
     31.059] 	Entry deleted from font path.  
     31.059] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.  
     31.059] 	Entry deleted from font path.  
     31.059] (==) FontPath set to:  
 	/usr/share/fonts/misc:unscaled,  
 	/usr/share/fonts/Type1/,  
 	/usr/share/fonts/100dpi:unscaled,  
 	/usr/share/fonts/75dpi:unscaled,  
 	/usr/share/fonts/cyrillic:unscaled,  
 	/usr/share/fonts/truetype/,  
 	built-ins  
     31.059] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules"  
     31.059] (II) The server relies on udev to provide the list of input devices.  
 	If no devices become available, reconfigure udev or disable AutoAddDevices.  
     31.059] (II) Loader magic: 0x7ccae0  
     31.059] (II) Module ABI versions:  
     31.059] 	X.Org ANSI C Emulation: 0.4  
     31.059] 	X.Org Video Driver: 12.0  
     31.059] 	X.Org XInput driver : 16.0  
     31.059] 	X.Org Server Extension : 6.0  
     31.060] (--) PCI:*(0:1:0:0) 1002:9553:1179:ff82 rev 0, Mem @ 0xc0000000/268435456, 0xd6200000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072  
     31.060] (II) Open ACPI successful (/var/run/acpid.socket)  
     31.060] (II) "extmod" will be loaded by default.  
     31.060] (II) "dbe" will be loaded by default.  
     31.060] (II) "glx" will be loaded by default.  
     31.060] (II) "record" will be loaded by default.  
     31.060] (II) "dri" will be loaded by default.  
     31.060] (II) "dri2" will be loaded by default.  
     31.060] (II) LoadModule: "extmod" 
     31.107] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so  
     31.107] (II) Module extmod: vendor="X.Org Foundation"  
     31.107] 	compiled for 1.12.3, module version = 1.0.0  
     31.107] 	Module class: X.Org Server Extension  
     31.107] 	ABI class: X.Org Server Extension, version 6.0  
     31.107] (II) Loading extension MIT-SCREEN-SAVER  
     31.107] (II) Loading extension XFree86-VidModeExtension  
     31.107] (II) Loading extension XFree86-DGA  
     31.107] (II) Loading extension DPMS  
     31.107] (II) Loading extension XVideo  
     31.107] (II) Loading extension XVideo-MotionCompensation  
     31.107] (II) Loading extension X-Resource  
     31.107] (II) LoadModule: "dbe" 
     31.108] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so  
     31.108] (II) Module dbe: vendor="X.Org Foundation"  
     31.108] 	compiled for 1.12.3, module version = 1.0.0  
     31.108] 	Module class: X.Org Server Extension  
     31.108] 	ABI class: X.Org Server Extension, version 6.0  
     31.108] (II) Loading extension DOUBLE-BUFFER  
     31.108] (II) LoadModule: "glx" 
     31.109] (II) Loading /usr/lib64/xorg/modules/updates/extensions/libglx.so  
     31.109] (II) Module glx: vendor="Advanced Micro Devices, Inc."  
     31.109] 	compiled for 6.9.0, module version = 1.0.0  
     31.109] (II) Loading extension GLX 
     31.109] (II) LoadModule: "record" 
     31.110] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so  
     31.110] (II) Module record: vendor="X.Org Foundation"  
     31.111] 	compiled for 1.12.3, module version = 1.13.0  
     31.111] 	Module class: X.Org Server Extension  
     31.111] 	ABI class: X.Org Server Extension, version 6.0  
     31.111] (II) Loading extension RECORD  
     31.111] (II) LoadModule: "dri" 
     31.112] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so  
     31.112] (II) Module dri: vendor="X.Org Foundation"  
     31.112] 	compiled for 1.12.3, module version = 1.0.0  
     31.112] 	ABI class: X.Org Server Extension, version 6.0  
     31.112] (II) Loading extension XFree86-DRI  
     31.112] (II) LoadModule: "dri2" 
     31.113] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so  
     31.113] (II) Module dri2: vendor="X.Org Foundation"  
     31.113] 	compiled for 1.12.3, module version = 1.2.0  
     31.113] 	ABI class: X.Org Server Extension, version 6.0  
     31.113] (II) Loading extension DRI2  
     31.113] (II) LoadModule: "fglrx" 
     31.114] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so  
     32.240] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."  
     32.240] 	compiled for 1.4.99.906, module version = 8.97.2  
     32.240] 	Module class: X.Org Video Driver  
     32.241] (II) Loading sub module "fglrxdrm"  
     32.241] (II) LoadModule: "fglrxdrm"  
     32.242] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so  
     32.242] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."  
     32.242] 	compiled for 1.4.99.906, module version = 8.97.2  
     32.242] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2  
     32.242] (II) ATI Proprietary Linux Driver Release Identifier: 8.97.100.3                            
     32.242] (II) ATI Proprietary Linux Driver Build Date: Jul  3 2012 23:56:30  
     32.242] (++) using VT number 7  
 

     32.242] (WW) Falling back to old probe method for fglrx  
     32.280] (II) Loading PCS database from /etc/ati/amdpcsdb  
     32.413] (--) Chipset Supported AMD Graphics Processor (0x9553) found  
     32.439] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found  
     32.440] (II) AMD Video driver is running on a device belonging to a group targeted for this release  
     32.440] (II) AMD Video driver is signed  
     32.440] (II) fglrx(0): pEnt->device->identifier=0x1dede70  
     32.440] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin  
     32.440] (II) Loading sub module "vgahw"  
     32.440] (II) LoadModule: "vgahw" 
     32.451] (II) Loading /usr/lib64/xorg/modules/libvgahw.so  
     32.452] (II) Module vgahw: vendor="X.Org Foundation"  
     32.452] 	compiled for 1.12.3, module version = 0.1.0  
     32.452] 	ABI class: X.Org Video Driver, version 12.0  
     32.452] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32  
     32.452] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)  
     32.452] (==) fglrx(0): Default visual is TrueColor  
     32.452] (**) fglrx(0): Option "DPMS" "true"  
     32.452] (==) fglrx(0): RGB weight 888  
     32.452] (II) fglrx(0): Using 8 bits per RGB  
     32.452] (==) fglrx(0): Buffer Tiling is ON  
     32.452] (II) Loading sub module "fglrxdrm"  
     32.452] (II) LoadModule: "fglrxdrm"  
     32.453] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so  
     32.453] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."  
     32.453] 	compiled for 1.4.99.906, module version = 8.97.2  
     32.454] ukiDynamicMajor: found major device number 251  
     32.455] ukiDynamicMajor: found major device number 251  
     32.455] ukiOpenByBusid: Searching for BusID PCI:1:0:0  
     32.455] ukiOpenDevice: node name is /dev/ati/card0  
     32.455] ukiOpenDevice: open result is 12, (OK)  
     32.455] ukiOpenByBusid: ukiOpenMinor returns 12  
     32.455] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0  
     32.455] (**) fglrx(0): NoAccel = NO  
     32.455] (**) fglrx(0): ATI 2D Acceleration Architecture enabled  
     32.455] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4500/5100 Series" (Chipset = 0x9553)  
     32.455] (--) fglrx(0): (PciSubVendor = 0x1179, PciSubDevice = 0xff82)  
     32.455] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI  
     32.455] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000  
     32.455] (--) fglrx(0): MMIO registers at 0xd6200000  
     32.455] (--) fglrx(0): I/O port at 0x0000a000  
     32.455] (==) fglrx(0): ROM-BIOS at 0x000c0000  
     32.496] (II) fglrx(0): AC Adapter is used  
     32.566] (II) fglrx(0): Primary V_BIOS segment is: 0xc000  
     32.578] (II) Loading sub module "vbe"  
     32.578] (II) LoadModule: "vbe" 
     32.579] (II) Loading /usr/lib64/xorg/modules/libvbe.so  
     32.579] (II) Module vbe: vendor="X.Org Foundation"  
     32.579] 	compiled for 1.12.3, module version = 1.1.0  
     32.579] 	ABI class: X.Org Video Driver, version 12.0  
     32.586] (II) fglrx(0): VESA BIOS detected  
     32.586] (II) fglrx(0): VbeVersion is 768, OemStringPtr is 0xc00001ec,  
 	OemVendorNamePtr is 0xc000010c, OemProductNamePtr is 0xc00000a0,  
 	OemProductRevPtr is 0xc0004e60  
     32.586] (II) fglrx(0): VESA VBE Version 3.0  
     32.586] (II) fglrx(0): VESA VBE Total Mem: 16384 kB  
     32.586] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS  
     32.586] (II) fglrx(0): VESA VBE OEM Software Rev: 11.22  
     32.586] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.  
     32.586] (II) fglrx(0): VESA VBE OEM Product: M92  
     32.586] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00  
     32.616] (II) fglrx(0): ATI Video BIOS revision 9 or later detected  
     32.616] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3  
     32.616] (II) fglrx(0): PCIE card detected  
     32.616] (--) fglrx(0): Using per-process page tables (PPPT) as GART.  
     32.616] (WW) fglrx(0): board is an unknown third party board, chipset is supported  
     32.618] (II) fglrx(0): Using adapter: 1:0.0.  
     32.649] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)  
     32.743] (II) fglrx(0): Interrupt handler installed at IRQ 46.  
     32.743] (II) fglrx(0): RandR 1.2 support is enabled!  
     32.743] (II) fglrx(0): RandR 1.2 rotation support is enabled!  
     32.743] (==) fglrx(0): Center Mode is disabled  
     32.743] (II) Loading sub module "fb"  
     32.743] (II) LoadModule: "fb" 
     32.744] (II) Loading /usr/lib64/xorg/modules/libfb.so  
     32.744] (II) Module fb: vendor="X.Org Foundation"  
     32.744] 	compiled for 1.12.3, module version = 1.0.0  
     32.744] 	ABI class: X.Org ANSI C Emulation, version 0.4  
     32.745] (II) Loading sub module "ddc"  
     32.745] (II) LoadModule: "ddc" 
     32.745] (II) Module "ddc" already built-in  
     33.315] (II) fglrx(0): Finished Initialize PPLIB!  
     33.383] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0  
     33.383] (II) fglrx(0): Output DFP1 has no monitor section  
     33.383] (II) fglrx(0): Output DFP2 has no monitor section  
     33.383] (II) fglrx(0): Output CRT1 has no monitor section  
     33.383] (II) Loading sub module "ddc"  
     33.383] (II) LoadModule: "ddc" 
     33.383] (II) Module "ddc" already built-in  
     33.383] (II) fglrx(0): Connected Display0: LVDS  
     33.383] (II) fglrx(0): Display0 EDID data ---------------------------  
     33.383] (II) fglrx(0): Manufacturer: SEC  Model: 544b  Serial#: 0  
     33.383] (II) fglrx(0): Year: 2008  Week: 0  
     33.383] (II) fglrx(0): EDID Version: 1.3  
     33.383] (II) fglrx(0): Digital Display Input  
     33.383] (II) fglrx(0): Max Image Size [cm]: horiz.: 38  vert.: 21  
     33.383] (II) fglrx(0): Gamma: 2.20 
     33.383] (II) fglrx(0): No DPMS capabilities specified  
     33.383] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4  
     33.383] (II) fglrx(0): First detailed timing is preferred mode  
     33.383] (II) fglrx(0): redX: 0.600 redY: 0.340   greenX: 0.310 greenY: 0.560  
     33.383] (II) fglrx(0): blueX: 0.150 blueY: 0.130   whiteX: 0.313 whiteY: 0.329  
     33.383] (II) fglrx(0): Manufacturer's mask: 0  
     33.383] (II) fglrx(0): Supported detailed timing:  
     33.383] (II) fglrx(0): clock: 107.8 MHz   Image Size:  382 x 215 mm  
     33.383] (II) fglrx(0): h_active: 1600  h_sync: 1648  h_sync_end 1680 h_blank_end 1892 h_border: 0  
     33.383] (II) fglrx(0): v_active: 900  v_sync: 902  v_sync_end 908 v_blanking: 950 v_border: 0  
     33.383] (II) fglrx(0): Unknown vendor-specific block f  
     33.383] (II) fglrx(0):  SAMSUNG  
     33.383] (II) fglrx(0):  173KT01-T01  
     33.383] (II) fglrx(0): EDID (in hex):  
     33.383] (II) fglrx(0): 	00ffffffffffff004ca34b5400000000  
     33.383] (II) fglrx(0): 	00120103802615780a859599574f8f26  
     33.383] (II) fglrx(0): 	21505400000001010101010101010101  
     33.383] (II) fglrx(0): 	010101010101202a4024618432303020  
     33.383] (II) fglrx(0): 	26007ed7100000190000000f00000000  
     33.383] (II) fglrx(0): 	00000000001eb4027400000000fe0053  
     33.383] (II) fglrx(0): 	414d53554e470a2020202020000000fe  
     33.383] (II) fglrx(0): 	003137334b5430312d5430310a200097  
     33.383] (II) fglrx(0): End of Display0 EDID data --------------------  
     33.424] (II) fglrx(0): EDID for output LVDS  
     33.424] (II) fglrx(0): Manufacturer: SEC  Model: 544b  Serial#: 0  
     33.424] (II) fglrx(0): Year: 2008  Week: 0  
     33.424] (II) fglrx(0): EDID Version: 1.3  
     33.424] (II) fglrx(0): Digital Display Input  
     33.424] (II) fglrx(0): Max Image Size [cm]: horiz.: 38  vert.: 21
8

Teil 2:

       33.424] (II) fglrx(0): Gamma: 2.20 
     33.424] (II) fglrx(0): No DPMS capabilities specified  
     33.424] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4  
     33.424] (II) fglrx(0): First detailed timing is preferred mode  
     33.424] (II) fglrx(0): redX: 0.600 redY: 0.340   greenX: 0.310 greenY: 0.560  
     33.424] (II) fglrx(0): blueX: 0.150 blueY: 0.130   whiteX: 0.313 whiteY: 0.329  
     33.424] (II) fglrx(0): Manufacturer's mask: 0  
     33.424] (II) fglrx(0): Supported detailed timing:  
     33.424] (II) fglrx(0): clock: 107.8 MHz   Image Size:  382 x 215 mm  
     33.424] (II) fglrx(0): h_active: 1600  h_sync: 1648  h_sync_end 1680 h_blank_end 1892 h_border: 0  
     33.424] (II) fglrx(0): v_active: 900  v_sync: 902  v_sync_end 908 v_blanking: 950 v_border: 0  
     33.424] (II) fglrx(0): Unknown vendor-specific block f  
     33.424] (II) fglrx(0):  SAMSUNG  
     33.424] (II) fglrx(0):  173KT01-T01  
     33.424] (II) fglrx(0): EDID (in hex):  
     33.424] (II) fglrx(0): 	00ffffffffffff004ca34b5400000000  
     33.424] (II) fglrx(0): 	00120103802615780a859599574f8f26  
     33.424] (II) fglrx(0): 	21505400000001010101010101010101  
     33.424] (II) fglrx(0): 	010101010101202a4024618432303020  
     33.424] (II) fglrx(0): 	26007ed7100000190000000f00000000  
     33.424] (II) fglrx(0): 	00000000001eb4027400000000fe0053  
     33.424] (II) fglrx(0): 	414d53554e470a2020202020000000fe  
     33.424] (II) fglrx(0): 	003137334b5430312d5430310a200097  
     33.424] (II) fglrx(0): EDID vendor "SEC", prod id 21579  
     33.424] (II) fglrx(0): Printing DDC gathered Modelines:  
     33.424] (II) fglrx(0): Modeline "1600x900"x0.0  107.84  1600 1648 1680 1892  900 902 908 950 -hsync -vsync (57.0 kHz eP)  
     33.425] (II) fglrx(0): Printing probed modes for output LVDS  
     33.425] (II) fglrx(0): Modeline "1600x900"x60.0  107.84  1600 1648 1680 1892  900 902 908 950 +hsync +vsync (57.0 kHz)  
     33.425] (II) fglrx(0): Modeline "1440x900"x60.0  107.84  1440 1648 1680 1892  900 902 908 950 +hsync +vsync (57.0 kHz)  
     33.425] (II) fglrx(0): Modeline "1280x800"x60.0  107.84  1280 1648 1680 1892  800 902 908 950 +hsync +vsync (57.0 kHz)  
     33.425] (II) fglrx(0): Modeline "1152x864"x60.0  107.84  1152 1648 1680 1892  864 902 908 950 +hsync +vsync (57.0 kHz)  
     33.425] (II) fglrx(0): Modeline "1280x768"x60.0  107.84  1280 1648 1680 1892  768 902 908 950 +hsync +vsync (57.0 kHz)  
     33.425] (II) fglrx(0): Modeline "1280x720"x60.0  107.84  1280 1648 1680 1892  720 902 908 950 +hsync +vsync (57.0 kHz)  
     33.425] (II) fglrx(0): Modeline "1024x768"x60.0  107.84  1024 1648 1680 1892  768 902 908 950 +hsync +vsync (57.0 kHz)  
     33.425] (II) fglrx(0): Modeline "1024x600"x60.0  107.84  1024 1648 1680 1892  600 902 908 950 +hsync +vsync (57.0 kHz)  
     33.425] (II) fglrx(0): Modeline "800x600"x60.0  107.84  800 1648 1680 1892  600 902 908 950 +hsync +vsync (57.0 kHz)  
     33.425] (II) fglrx(0): Modeline "800x480"x60.0  107.84  800 1648 1680 1892  480 902 908 950 +hsync +vsync (57.0 kHz)  
     33.425] (II) fglrx(0): Modeline "720x480"x60.0  107.84  720 1648 1680 1892  480 902 908 950 +hsync +vsync (57.0 kHz)  
     33.425] (II) fglrx(0): Modeline "640x480"x60.0  107.84  640 1648 1680 1892  480 902 908 950 +hsync +vsync (57.0 kHz)  
     33.425] (II) fglrx(0): EDID for output DFP1  
     33.425] (II) fglrx(0): EDID for output DFP2  
     33.425] (II) fglrx(0): EDID for output CRT1  
     33.425] (II) fglrx(0): Output LVDS connected  
     33.425] (II) fglrx(0): Output DFP1 disconnected  
     33.425] (II) fglrx(0): Output DFP2 disconnected  
     33.425] (II) fglrx(0): Output CRT1 disconnected  
     33.425] (II) fglrx(0): Using exact sizes for initial modes  
     33.425] (II) fglrx(0): Output LVDS using initial mode 1600x900  
     33.425] (II) fglrx(0): Display dimensions: (380, 210) mm  
     33.425] (II) fglrx(0): DPI set to (106, 108)  
     33.425] (II) fglrx(0): Adapter ATI Mobility Radeon HD 4500/5100 Series has 2 configurable heads and 1 displays connected.  
     33.425] (==) fglrx(0):  PseudoColor visuals disabled  
     33.425] (II) Loading sub module "ramdac"  
     33.425] (II) LoadModule: "ramdac" 
     33.425] (II) Module "ramdac" already built-in  
     33.425] (==) fglrx(0): NoDRI = NO  
     33.425] (==) fglrx(0): Capabilities: 0x00000000  
     33.425] (==) fglrx(0): CapabilitiesEx: 0x00000000  
     33.425] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"  
     33.425] (==) fglrx(0): UseFastTLS=0  
     33.425] (==) fglrx(0): BlockSignalsOnLock=1  
     33.425] (--) Depth 24 pixmap format is 32 bpp  
     33.425] (II) Loading extension ATIFGLRXDRI  
     33.425] (II) fglrx(0): doing swlDriScreenInit  
     33.425] (II) fglrx(0): swlDriScreenInit for fglrx driver  
     33.425] ukiDynamicMajor: found major device number 251  
     33.425] ukiDynamicMajor: found major device number 251  
     33.425] ukiDynamicMajor: found major device number 251  
     33.425] ukiOpenByBusid: Searching for BusID PCI:1:0:0  
     33.425] ukiOpenDevice: node name is /dev/ati/card0  
     33.425] ukiOpenDevice: open result is 13, (OK)  
     33.425] ukiOpenByBusid: ukiOpenMinor returns 13  
     33.425] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0  
     33.425] (II) fglrx(0): [uki] DRM interface version 1.0  
     33.425] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"  
     33.425] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000  
     33.425] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f2f5b89a000  
     33.425] (II) fglrx(0): [uki] framebuffer handle = 0x3000  
     33.426] (II) fglrx(0): [uki] added 1 reserved context for kernel  
     33.426] (II) fglrx(0): swlDriScreenInit done  
     33.426] (II) fglrx(0): Kernel Module Version Information:  
     33.426] (II) fglrx(0):     Name: fglrx  
     33.426] (II) fglrx(0):     Version: 8.97.2  
     33.426] (II) fglrx(0):     Date: Jul  4 2012  
     33.426] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module  
     33.426] (II) fglrx(0): Kernel Module version matches driver.  
     33.426] (II) fglrx(0): Kernel Module Build Time Information:  
     33.426] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.4.11-2.16-desktop  
     33.426] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no  
     33.426] (II) fglrx(0):     Build-Kernel __SMP__:            yes  
     33.426] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000  
     33.426] (II) fglrx(0): [uki] register handle = 0x00004000  
     33.665] (II) fglrx(0): DRI initialization successfull  
     33.665] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000  
     33.665] (==) fglrx(0): Backing store disabled  
     33.665] (II) Loading extension FGLRXEXTENSION  
     33.665] (**) fglrx(0): DPMS enabled  
     33.666] (II) fglrx(0): Initialized in-driver Xinerama extension  
     33.666] (**) fglrx(0): Textured Video is enabled.  
     33.666] (II) LoadModule: "glesx" 
     33.666] (II) Loading /usr/lib64/xorg/modules/glesx.so  
     33.667] (II) Module glesx: vendor="X.Org Foundation"  
     33.667] 	compiled for 1.4.99.906, module version = 1.0.0  
     33.667] (II) Loading extension GLESX  
     33.667] (II) fglrx(0): GLESX enableFlags = 528  
     33.667] (II) fglrx(0): GLESX is enabled  
     33.667] (II) LoadModule: "amdxmm" 
     33.668] (II) Loading /usr/lib64/xorg/modules/amdxmm.so  
     33.668] (II) Module amdxmm: vendor="X.Org Foundation"  
     33.668] 	compiled for 1.4.99.906, module version = 2.0.0  
     33.668] (II) Loading extension AMDXVOPL  
     33.668] (II) Loading extension AMDXVBA  
     33.733] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):  
     33.735] (II) fglrx(0): Enable composite support successfully  
     33.735] (WW) fglrx(0): Option "VendorName" is not used  
     33.735] (WW) fglrx(0): Option "ModelName" is not used  
     33.735] (II) fglrx(0): X context handle = 0x1  
     33.735] (II) fglrx(0): [DRI] installation complete  
     33.735] (==) fglrx(0): Silken mouse enabled  
     33.735] (==) fglrx(0): Using HW cursor of display infrastructure!  
     33.735] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.  
     33.736] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'  
     33.736] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'  
     34.783] (--) RandR disabled  
     34.783] (II) Initializing built-in extension Generic Event Extension  
     34.783] (II) Initializing built-in extension SHAPE  
     34.783] (II) Initializing built-in extension MIT-SHM  
     34.783] (II) Initializing built-in extension XInputExtension  
     34.783] (II) Initializing built-in extension XTEST  
     34.783] (II) Initializing built-in extension BIG-REQUESTS  
     34.783] (II) Initializing built-in extension SYNC  
     34.783] (II) Initializing built-in extension XKEYBOARD  
     34.783] (II) Initializing built-in extension XC-MISC  
     34.783] (II) Initializing built-in extension SECURITY  
     34.783] (II) Initializing built-in extension XINERAMA  
     34.783] (II) Initializing built-in extension XFIXES  
     34.783] (II) Initializing built-in extension RENDER  
     34.783] (II) Initializing built-in extension RANDR  
     34.783] (II) Initializing built-in extension COMPOSITE  
     34.783] (II) Initializing built-in extension DAMAGE  
     34.785] ukiDynamicMajor: found major device number 251  
     34.785] ukiDynamicMajor: found major device number 251  
     34.785] ukiOpenByBusid: Searching for BusID PCI:1:0:0  
     34.785] ukiOpenDevice: node name is /dev/ati/card0  
     34.785] ukiOpenDevice: open result is 14, (OK)  
     34.785] ukiOpenByBusid: ukiOpenMinor returns 14  
     34.785] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0  
     36.744] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0  
     36.767] (II) fglrx(0): Enable the clock gating!  
     36.767] (II) fglrx(0): Setting screen physical size to 423 x 238  
     36.854] (II) XKB: Reusing cached keymap  
     36.858] (II) config/udev: Adding input device Power Button (/dev/input/event4)  
     36.858] (**) Power Button: Applying InputClass "evdev keyboard catchall"  
     36.858] (**) Power Button: Applying InputClass "evdev keyboard catchall"  
     36.858] (**) Power Button: Applying InputClass "LocalKeyboard"  
     36.858] (II) LoadModule: "evdev" 
     36.859] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so  
     36.860] (II) Module evdev: vendor="X.Org Foundation"  
     36.860] 	compiled for 1.12.3, module version = 2.7.3  
     36.860] 	Module class: X.Org XInput Driver  
     36.860] 	ABI class: X.Org XInput driver, version 16.0  
     36.860] (II) Using input driver 'evdev' for 'Power Button'  
     36.860] 	Option "XkbRules" "evdev"  
     36.860] 	Option "XkbModel" "evdev"  
     36.860] 	Option "XkbLayout" "de"  
     36.860] 	Option "_source" "server/udev"  
     36.860] 	Option "name" "Power Button"  
     36.860] 	Option "path" "/dev/input/event4"  
     36.860] 	Option "device" "/dev/input/event4"  
     36.860] 	Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4" 
     36.860] 	Option "driver" "evdev"  
     36.860] 	Option "XkbVariant" "nodeadkeys"  
     36.860] (**) Power Button: always reports core events  
     36.860] (**) evdev: Power Button: Device: "/dev/input/event4"  
     36.860] (--) evdev: Power Button: Vendor 0 Product 0x1  
     36.860] (--) evdev: Power Button: Found keys  
     36.860] (II) evdev: Power Button: Configuring as keyboard  
     36.860] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4" 
     36.860] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) 
     36.860] (**) Option "xkb_rules" "evdev"  
     36.860] (**) Option "xkb_model" "evdev"  
     36.860] (**) Option "xkb_layout" "de"  
     36.860] (**) Option "xkb_variant" "nodeadkeys"  
     36.899] (II) config/udev: Adding input device Video Bus (/dev/input/event6)  
     36.900] (**) Video Bus: Applying InputClass "evdev keyboard catchall"  
     36.900] (**) Video Bus: Applying InputClass "evdev keyboard catchall"  
     36.900] (**) Video Bus: Applying InputClass "LocalKeyboard"  
     36.900] (II) Using input driver 'evdev' for 'Video Bus'  
     36.900] 	Option "XkbRules" "evdev"  
     36.900] 	Option "XkbModel" "evdev"  
     36.900] 	Option "XkbLayout" "de"  
     36.900] 	Option "_source" "server/udev"  
     36.900] 	Option "name" "Video Bus"  
     36.900] 	Option "path" "/dev/input/event6"  
     36.900] 	Option "device" "/dev/input/event6"  
     36.900] 	Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6/event6" 
     36.900] 	Option "driver" "evdev"  
     36.900] 	Option "XkbVariant" "nodeadkeys"  
     36.900] (**) Video Bus: always reports core events  
     36.900] (**) evdev: Video Bus: Device: "/dev/input/event6"  
     36.900] (--) evdev: Video Bus: Vendor 0 Product 0x6  
     36.900] (--) evdev: Video Bus: Found keys  
     36.900] (II) evdev: Video Bus: Configuring as keyboard  
     36.900] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6/event6" 
     36.900] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)  
     36.900] (**) Option "xkb_rules" "evdev"  
     36.900] (**) Option "xkb_model" "evdev"  
     36.900] (**) Option "xkb_layout" "de"  
     36.900] (**) Option "xkb_variant" "nodeadkeys"  
     36.900] (II) XKB: Reusing cached keymap  
     36.901] (II) config/udev: Adding input device Power Button (/dev/input/event3)  
     36.901] (**) Power Button: Applying InputClass "evdev keyboard catchall"  
     36.901] (**) Power Button: Applying InputClass "evdev keyboard catchall"  
     36.901] (**) Power Button: Applying InputClass "LocalKeyboard"  
     36.901] (II) Using input driver 'evdev' for 'Power Button'  
     36.901] 	Option "XkbRules" "evdev"  
     36.901] 	Option "XkbModel" "evdev"  
     36.901] 	Option "XkbLayout" "de"  
     36.901] 	Option "_source" "server/udev"  
     36.901] 	Option "name" "Power Button"  
     36.901] 	Option "path" "/dev/input/event3"  
     36.901] 	Option "device" "/dev/input/event3"  
     36.901] 	Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3" 
     36.901] 	Option "driver" "evdev"
9

und Teil 3:

       36.901] 	Option "XkbVariant" "nodeadkeys"  
     36.901] (**) Power Button: always reports core events  
     36.901] (**) evdev: Power Button: Device: "/dev/input/event3"  
     36.901] (--) evdev: Power Button: Vendor 0 Product 0x1  
     36.901] (--) evdev: Power Button: Found keys  
     36.901] (II) evdev: Power Button: Configuring as keyboard  
     36.901] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3" 
     36.902] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) 
     36.902] (**) Option "xkb_rules" "evdev"  
     36.902] (**) Option "xkb_model" "evdev"  
     36.902] (**) Option "xkb_layout" "de"  
     36.902] (**) Option "xkb_variant" "nodeadkeys"  
     36.902] (II) XKB: Reusing cached keymap  
     36.903] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)  
     36.903] (II) No input driver specified, ignoring this device.  
     36.903] (II) This device may have been added with another device file.  
     36.903] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event12)  
     36.903] (II) No input driver specified, ignoring this device.  
     36.903] (II) This device may have been added with another device file.  
     36.903] (II) config/udev: Adding input device USB2.0 UVC WebCam (/dev/input/event8)  
     36.903] (**) USB2.0 UVC WebCam: Applying InputClass "evdev keyboard catchall"  
     36.903] (**) USB2.0 UVC WebCam: Applying InputClass "evdev keyboard catchall"  
     36.903] (**) USB2.0 UVC WebCam: Applying InputClass "LocalKeyboard"  
     36.903] (II) Using input driver 'evdev' for 'USB2.0 UVC WebCam'  
     36.903] 	Option "XkbRules" "evdev"  
     36.903] 	Option "XkbModel" "evdev"  
     36.903] 	Option "XkbLayout" "de"  
     36.903] 	Option "_source" "server/udev"  
     36.903] 	Option "name" "USB2.0 UVC WebCam"  
     36.903] 	Option "path" "/dev/input/event8"  
     36.903] 	Option "device" "/dev/input/event8"  
     36.903] 	Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input8/event8" 
     36.903] 	Option "driver" "evdev"  
     36.903] 	Option "XkbVariant" "nodeadkeys"  
     36.903] (**) USB2.0 UVC WebCam: always reports core events  
     36.903] (**) evdev: USB2.0 UVC WebCam: Device: "/dev/input/event8"  
     36.903] (--) evdev: USB2.0 UVC WebCam: Vendor 0x4f2 Product 0xb128  
     36.903] (--) evdev: USB2.0 UVC WebCam: Found keys  
     36.903] (II) evdev: USB2.0 UVC WebCam: Configuring as keyboard  
     36.903] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input8/event8" 
     36.903] (II) XINPUT: Adding extended input device "USB2.0 UVC WebCam" (type: KEYBOARD, id 9)  
     36.903] (**) Option "xkb_rules" "evdev"  
     36.903] (**) Option "xkb_model" "evdev"  
     36.903] (**) Option "xkb_layout" "de"  
     36.903] (**) Option "xkb_variant" "nodeadkeys"  
     36.903] (II) XKB: Reusing cached keymap  
     36.904] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)  
     36.904] (II) No input driver specified, ignoring this device.  
     36.904] (II) This device may have been added with another device file.  
     36.904] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)  
     36.904] (II) No input driver specified, ignoring this device.  
     36.904] (II) This device may have been added with another device file.  
     36.904] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11)  
     36.904] (II) No input driver specified, ignoring this device.  
     36.904] (II) This device may have been added with another device file.  
     36.905] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)  
     36.905] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"  
     36.905] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"  
     36.905] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard"  
     36.905] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'  
     36.905] 	Option "XkbRules" "evdev"  
     36.905] 	Option "XkbModel" "evdev"  
     36.905] 	Option "XkbLayout" "de"  
     36.905] 	Option "_source" "server/udev"  
     36.905] 	Option "name" "AT Translated Set 2 keyboard"  
     36.905] 	Option "path" "/dev/input/event0"  
     36.905] 	Option "device" "/dev/input/event0"  
     36.905] 	Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" 
     36.905] 	Option "driver" "evdev"  
     36.905] 	Option "XkbVariant" "nodeadkeys"  
     36.905] (**) AT Translated Set 2 keyboard: always reports core events  
     36.905] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"  
     36.905] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1  
     36.905] (--) evdev: AT Translated Set 2 keyboard: Found keys  
     36.905] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard  
     36.905] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" 
     36.905] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)  
     36.905] (**) Option "xkb_rules" "evdev"  
     36.905] (**) Option "xkb_model" "evdev"  
     36.905] (**) Option "xkb_layout" "de"  
     36.905] (**) Option "xkb_variant" "nodeadkeys"  
     36.905] (II) XKB: Reusing cached keymap  
     36.905] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)  
     36.905] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"  
     36.905] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"  
     36.905] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"  
     36.905] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"  
     36.905] (II) LoadModule: "synaptics"  
     36.906] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so  
     36.906] (II) Module synaptics: vendor="X.Org Foundation"  
     36.906] 	compiled for 1.12.3, module version = 1.6.2  
     36.906] 	Module class: X.Org XInput Driver  
     36.906] 	ABI class: X.Org XInput driver, version 16.0  
     36.906] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'  
     36.906] 	Option "_source" "server/udev"  
     36.906] 	Option "name" "SynPS/2 Synaptics TouchPad"  
     36.906] 	Option "path" "/dev/input/event1"  
     36.906] 	Option "device" "/dev/input/event1"  
     36.906] 	Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input1/event1" 
     36.906] 	Option "driver" "synaptics"  
     36.906] 	Option "HorizScrollDelta" "0"  
     36.906] 	Option "TapButton1" "1"  
     36.906] 	Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"  
     36.906] (**) SynPS/2 Synaptics TouchPad: always reports core events  
     36.906] (**) Option "Device" "/dev/input/event1"  
     36.913] (**) Option "Device" "/dev/input/event1"  
     36.913] port opened successfully  
     36.913] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device  
     36.913] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5772  
     36.913] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5086  
     36.913] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255  
     36.913] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15  
     36.913] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple  
     36.913] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7  
     36.913] (**) Option "HorizScrollDelta" "0"  
     36.913] (**) Option "TapButton1" "1"  
     36.913] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found  
     36.913] (**) SynPS/2 Synaptics TouchPad: always reports core events  
     36.913] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input1/event1" 
     36.913] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)  
     36.914] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 
     36.914] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75  
     36.914] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.035  
     36.914] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1  
     36.914] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1  
     36.914] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000  
     36.914] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4  
     36.914] (**) Option "Device" "/dev/input/event1"  
     36.914] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found  
     36.915] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)  
     36.915] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"  
     36.915] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)  
     36.915] (II) No input driver specified, ignoring this device.  
     36.915] (II) This device may have been added with another device file.  
     36.917] (II) config/udev: Adding input device Toshiba input device (/dev/input/event7)  
     36.917] (**) Toshiba input device: Applying InputClass "evdev keyboard catchall"  
     36.917] (**) Toshiba input device: Applying InputClass "evdev keyboard catchall"  
     36.917] (**) Toshiba input device: Applying InputClass "LocalKeyboard"  
     36.917] (II) Using input driver 'evdev' for 'Toshiba input device'  
     36.917] 	Option "XkbRules" "evdev"  
     36.917] 	Option "XkbModel" "evdev"  
     36.917] 	Option "XkbLayout" "de"  
     36.917] 	Option "_source" "server/udev"  
     36.917] 	Option "name" "Toshiba input device"  
     36.917] 	Option "path" "/dev/input/event7"  
     36.917] 	Option "device" "/dev/input/event7"  
     36.917] 	Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"  
     36.917] 	Option "driver" "evdev"  
     36.917] 	Option "XkbVariant" "nodeadkeys"  
     36.917] (**) Toshiba input device: always reports core events  
     36.917] (**) evdev: Toshiba input device: Device: "/dev/input/event7"  
     36.917] (--) evdev: Toshiba input device: Vendor 0 Product 0  
     36.917] (--) evdev: Toshiba input device: Found keys  
     36.917] (II) evdev: Toshiba input device: Configuring as keyboard  
     36.917] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"  
     36.917] (II) XINPUT: Adding extended input device "Toshiba input device" (type: KEYBOARD, id 12)  
     36.917] (**) Option "xkb_rules" "evdev"  
     36.917] (**) Option "xkb_model" "evdev"  
     36.917] (**) Option "xkb_layout" "de"  
     36.917] (**) Option "xkb_variant" "nodeadkeys"  
     36.917] (II) XKB: Reusing cached keymap  
     37.421] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments  
     37.424] (II) fglrx(0): EDID vendor "SEC", prod id 21579  
     37.425] (II) fglrx(0): Printing DDC gathered Modelines:  
     37.425] (II) fglrx(0): Modeline "1600x900"x0.0  107.84  1600 1648 1680 1892  900 902 908 950 -hsync -vsync (57.0 kHz eP)  
     40.194] (II) fglrx(0): EDID vendor "SEC", prod id 21579  
     40.194] (II) fglrx(0): Printing DDC gathered Modelines:  
     40.194] (II) fglrx(0): Modeline "1600x900"x0.0  107.84  1600 1648 1680 1892  900 902 908 950 -hsync -vsync (57.0 kHz eP)  
     92.096] (II) fglrx(0): EDID vendor "SEC", prod id 21579  
     92.096] (II) fglrx(0): Printing DDC gathered Modelines:  
     92.096] (II) fglrx(0): Modeline "1600x900"x0.0  107.84  1600 1648 1680 1892  900 902 908 950 -hsync -vsync (57.0 kHz eP)  
     97.097] (II) fglrx(0): EDID vendor "SEC", prod id 21579  
     97.097] (II) fglrx(0): Printing DDC gathered Modelines:  
     97.097] (II) fglrx(0): Modeline "1600x900"x0.0  107.84  1600 1648 1680 1892  900 902 908 950 -hsync -vsync (57.0 kHz eP)
10

Current Operating System: Linux linux-f4zw 3.4.11-2.16-desktop #1 SMP PREEMPT Wed Sep 26 17:05:00 UTC 2012 (259fc87) x86_64

Wenn Du schon die 13.1 installiert hast, solltest Du auch einen Kernel der 13.1 benutzen und nicht den 3.4 er der 12.2

Poste einmal:

zypper lr -uP

zypper se -si kernel

zypper se -si fglrx

grep "blacklist radeon" /etc/modprobe.d/*.*
11 
zypper lr -uP
# | Alias                     | Name                               | Aktiviert | Aktualisieren | Priorität | URI                                                                       
--+---------------------------+------------------------------------+-----------+---------------+-----------+---------------------------------------------------------------------------
1 | openSUSE-13.1-1.10        | openSUSE-13.1-1.10                 | Ja        | Nein          |   99      | cd:///?devices=/dev/disk/by-id/ata-TSSTcorp_CDDVDW_TS-L633C_R5176GJZ254092
2 | repo-debug                | openSUSE-13.1-Debug                | Nein      | Ja            |   99      | http://download.opensuse.org/debug/distribution/13.1/repo/oss/            
3 | repo-debug-update         | openSUSE-13.1-Update-Debug         | Nein      | Ja            |   99      | http://download.opensuse.org/debug/update/13.1/                           
4 | repo-debug-update-non-oss | openSUSE-13.1-Update-Debug-Non-Oss | Nein      | Ja            |   99      | http://download.opensuse.org/debug/update/13.1-non-oss/                   
5 | repo-non-oss              | openSUSE-13.1-Non-Oss              | Ja        | Ja            |   99      | http://download.opensuse.org/distribution/13.1/repo/non-oss/              
6 | repo-oss                  | openSUSE-13.1-Oss                  | Ja        | Ja            |   99      | http://download.opensuse.org/distribution/13.1/repo/oss/                  
7 | repo-source               | openSUSE-13.1-Source               | Nein      | Ja            |   99      | http://download.opensuse.org/source/distribution/13.1/repo/oss/           
8 | repo-update               | openSUSE-13.1-Update               | Ja        | Ja            |   99      | http://download.opensuse.org/update/13.1/                                 
9 | repo-update-non-oss       | openSUSE-13.1-Update-Non-Oss       | Ja        | Ja            |   99      | http://download.opensuse.org/update/13.1-non-oss/                         



zypper se -si kernel
Repository 'openSUSE-13.1-Update' ist veraltet. Sie können 'zypper refresh' als root ausführen, um es zu aktualisieren.
Daten des Repositories laden ...
Installierte Pakete lesen ...

S | Name                 | Typ   | Version            | Arch   | Repository          
--+----------------------+-------+--------------------+--------+---------------------
i | kernel-default-devel | Paket | 3.11.10-17.2       | x86_64 | openSUSE-13.1-Update
i | kernel-default-devel | Paket | 3.11.6-4.1         | x86_64 | openSUSE-13.1-Oss   
i | kernel-default-devel | Paket | 3.11.6-4.1         | x86_64 | openSUSE-13.1-1.10  
i | kernel-desktop       | Paket | 3.11.10-17.2       | x86_64 | openSUSE-13.1-Update
i | kernel-desktop       | Paket | 3.11.6-4.1         | x86_64 | openSUSE-13.1-Oss   
i | kernel-desktop       | Paket | 3.11.6-4.1         | x86_64 | openSUSE-13.1-1.10  
i | kernel-desktop-devel | Paket | 3.11.10-17.2       | x86_64 | openSUSE-13.1-Update
i | kernel-desktop-devel | Paket | 3.11.6-4.1         | x86_64 | openSUSE-13.1-Oss   
i | kernel-desktop-devel | Paket | 3.11.6-4.1         | x86_64 | openSUSE-13.1-1.10  
i | kernel-devel         | Paket | 3.11.10-17.2       | noarch | openSUSE-13.1-Update
i | kernel-devel         | Paket | 3.11.6-4.1         | noarch | openSUSE-13.1-Oss   
i | kernel-devel         | Paket | 3.11.6-4.1         | noarch | openSUSE-13.1-1.10  
i | kernel-firmware      | Paket | 20130714git-2.17.1 | noarch | openSUSE-13.1-Update
i | kernel-source        | Paket | 3.11.10-17.2       | noarch | openSUSE-13.1-Update
i | kernel-source        | Paket | 3.11.6-4.1         | noarch | openSUSE-13.1-Oss   
i | kernel-source        | Paket | 3.11.6-4.1         | noarch | openSUSE-13.1-1.10  
i | kernel-syms          | Paket | 3.11.10-17.1       | x86_64 | openSUSE-13.1-Update
i | kernel-syms          | Paket | 3.11.6-4.1         | x86_64 | openSUSE-13.1-Oss   
i | kernel-syms          | Paket | 3.11.6-4.1         | x86_64 | openSUSE-13.1-1.10  
i | kernel-xen-devel     | Paket | 3.11.10-17.2       | x86_64 | openSUSE-13.1-Update
i | kernel-xen-devel     | Paket | 3.11.6-4.1         | x86_64 | openSUSE-13.1-Oss   
i | kernel-xen-devel     | Paket | 3.11.6-4.1         | x86_64 | openSUSE-13.1-1.10  
i | nfs-kernel-server    | Paket | 1.2.8-4.13.1       | x86_64 | openSUSE-13.1-Update



zypper se -si fglrx
Repository 'openSUSE-13.1-Update' ist veraltet. Sie können 'zypper refresh' als root ausführen, um es zu aktualisieren.
Daten des Repositories laden ...
Installierte Pakete lesen ...
Keine Pakete gefunden.



grep "blacklist radeon" /etc/modprobe.d/*.*
/etc/modprobe.d/50-blacklist.conf:blacklist radeonfb
12

Führe bitte ‘zypper refresh’ aus.

13

ja, Repositories sind nun aktualisiert.

zypper refresh
Repository 'openSUSE-13.1-1.10' ist aktuell.
Repository 'openSUSE-13.1-Non-Oss' ist aktuell.
Repository 'openSUSE-13.1-Oss' ist aktuell.
Metadaten von Repository 'openSUSE-13.1-Update' werden abgerufen .......[fertig]
Zwischenspeicher für Repository 'openSUSE-13.1-Update' wird erzeugt ....[fertig]
Repository 'openSUSE-13.1-Update-Non-Oss' ist aktuell.
Alle Repositories wurden aktualisiert.

zypper lr -uP
# | Alias                     | Name                               | Aktiviert | Aktualisieren | Priorität | URI                                                                       
--+---------------------------+------------------------------------+-----------+---------------+-----------+---------------------------------------------------------------------------
1 | openSUSE-13.1-1.10        | openSUSE-13.1-1.10                 | Ja        | Nein          |   99      | cd:///?devices=/dev/disk/by-id/ata-TSSTcorp_CDDVDW_TS-L633C_R5176GJZ254092
2 | repo-debug                | openSUSE-13.1-Debug                | Nein      | Ja            |   99      | http://download.opensuse.org/debug/distribution/13.1/repo/oss/            
3 | repo-debug-update         | openSUSE-13.1-Update-Debug         | Nein      | Ja            |   99      | http://download.opensuse.org/debug/update/13.1/                           
4 | repo-debug-update-non-oss | openSUSE-13.1-Update-Debug-Non-Oss | Nein      | Ja            |   99      | http://download.opensuse.org/debug/update/13.1-non-oss/                   
5 | repo-non-oss              | openSUSE-13.1-Non-Oss              | Ja        | Ja            |   99      | http://download.opensuse.org/distribution/13.1/repo/non-oss/              
6 | repo-oss                  | openSUSE-13.1-Oss                  | Ja        | Ja            |   99      | http://download.opensuse.org/distribution/13.1/repo/oss/                  
7 | repo-source               | openSUSE-13.1-Source               | Nein      | Ja            |   99      | http://download.opensuse.org/source/distribution/13.1/repo/oss/           
8 | repo-update               | openSUSE-13.1-Update               | Ja        | Ja            |   99      | http://download.opensuse.org/update/13.1/                                 
9 | repo-update-non-oss       | openSUSE-13.1-Update-Non-Oss       | Ja        | Ja            |   99      | http://download.opensuse.org/update/13.1-non-oss/                         



zypper se -si kernel
Daten des Repositories laden ...
Installierte Pakete lesen ...

S | Name                 | Typ   | Version            | Arch   | Repository          
--+----------------------+-------+--------------------+--------+---------------------
i | kernel-default-devel | Paket | 3.11.10-17.2       | x86_64 | openSUSE-13.1-Update
i | kernel-default-devel | Paket | 3.11.6-4.1         | x86_64 | openSUSE-13.1-Oss   
i | kernel-default-devel | Paket | 3.11.6-4.1         | x86_64 | openSUSE-13.1-1.10  
i | kernel-desktop       | Paket | 3.11.10-17.2       | x86_64 | openSUSE-13.1-Update
i | kernel-desktop       | Paket | 3.11.6-4.1         | x86_64 | openSUSE-13.1-Oss   
i | kernel-desktop       | Paket | 3.11.6-4.1         | x86_64 | openSUSE-13.1-1.10  
i | kernel-desktop-devel | Paket | 3.11.10-17.2       | x86_64 | openSUSE-13.1-Update
i | kernel-desktop-devel | Paket | 3.11.6-4.1         | x86_64 | openSUSE-13.1-Oss   
i | kernel-desktop-devel | Paket | 3.11.6-4.1         | x86_64 | openSUSE-13.1-1.10  
i | kernel-devel         | Paket | 3.11.10-17.2       | noarch | openSUSE-13.1-Update
i | kernel-devel         | Paket | 3.11.6-4.1         | noarch | openSUSE-13.1-Oss   
i | kernel-devel         | Paket | 3.11.6-4.1         | noarch | openSUSE-13.1-1.10  
i | kernel-firmware      | Paket | 20130714git-2.17.1 | noarch | openSUSE-13.1-Update
i | kernel-source        | Paket | 3.11.10-17.2       | noarch | openSUSE-13.1-Update
i | kernel-source        | Paket | 3.11.6-4.1         | noarch | openSUSE-13.1-Oss   
i | kernel-source        | Paket | 3.11.6-4.1         | noarch | openSUSE-13.1-1.10  
i | kernel-syms          | Paket | 3.11.10-17.1       | x86_64 | openSUSE-13.1-Update
i | kernel-syms          | Paket | 3.11.6-4.1         | x86_64 | openSUSE-13.1-Oss   
i | kernel-syms          | Paket | 3.11.6-4.1         | x86_64 | openSUSE-13.1-1.10  
i | kernel-xen-devel     | Paket | 3.11.10-17.2       | x86_64 | openSUSE-13.1-Update
i | kernel-xen-devel     | Paket | 3.11.6-4.1         | x86_64 | openSUSE-13.1-Oss   
i | kernel-xen-devel     | Paket | 3.11.6-4.1         | x86_64 | openSUSE-13.1-1.10  
i | nfs-kernel-server    | Paket | 1.2.8-4.13.1       | x86_64 | openSUSE-13.1-Update



zypper se -si fglrx
Daten des Repositories laden ...
Installierte Pakete lesen ...
Keine Pakete gefunden.



grep "blacklist radeon" /etc/modprobe.d/*.*
/etc/modprobe.d/50-blacklist.conf:blacklist radeonfb
14

Wie kommt denn bei den installierten Kernel dies in die Xorg.0.log:

 31.057] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4.11-2.16-desktop root=UUID=bed40cbf-9bfd-4d4c-b2d5-6fb93eeed846 video=1600x900 resume=/dev/disk/by-id/ata-TOSHIBA_MK3263GSXN_103JS3JHS-part5 splash=silent quiet showopts vga=0x317

Also poste einmal die aktuelle Xorg.0.log.

15

Hallo Sauerland,

du beziehst dich auf die ersten Zeilen, reicht dieser erste Abschnitt?

    31.057] 
X.Org X Server 1.12.3
Release Date: 2012-07-09
    31.057] X Protocol Version 11, Revision 0
    31.057] Build Operating System: openSUSE SUSE LINUX
    31.057] Current Operating System: Linux linux-f4zw 3.4.11-2.16-desktop #1 SMP PREEMPT Wed Sep 26 17:05:00 UTC 2012 (259fc87) x86_64
    31.057] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4.11-2.16-desktop root=UUID=bed40cbf-9bfd-4d4c-b2d5-6fb93eeed846 video=1600x900 resume=/dev/disk/by-id/ata-TOSHIBA_MK3263GSXN_103JS3JHS-part5 splash=silent quiet showopts vga=0x317
    31.057] Build Date: 08 January 2013  11:56:04AM
    31.057]  
    31.057] Current version of pixman: 0.24.4
    31.057]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    31.057] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    31.058] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 17 19:25:32 2013
    31.058] (==) Using config file: "/etc/X11/xorg.conf"
    31.058] (==) Using config directory: "/etc/X11/xorg.conf.d"
    31.058] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    31.059] (==) ServerLayout "aticonfig Layout"
    31.059] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    31.059] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
    31.059] (**) |   |-->Device "aticonfig-Device[0]-0"
    31.059] (==) Automatically adding devices
    31.059] (==) Automatically enabling devices
    31.059] (WW) The directory "/usr/share/fonts/URW/" does not exist.
    31.059]     Entry deleted from font path.
    31.059] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
    31.059]     Entry deleted from font path.
    31.059] (==) FontPath set to:
    /usr/share/fonts/misc:unscaled,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/cyrillic:unscaled,
    /usr/share/fonts/truetype/,
    built-ins
    31.059] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules"
    31.059] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    31.059] (II) Loader magic: 0x7ccae0
    31.059] (II) Module ABI versions:
    31.059]     X.Org ANSI C Emulation: 0.4
    31.059]     X.Org Video Driver: 12.0
    31.059]     X.Org XInput driver : 16.0
    31.059]     X.Org Server Extension : 6.0
    31.060] (--) PCI:*(0:1:0:0) 1002:9553:1179:ff82 rev 0, Mem @ 0xc0000000/268435456, 0xd6200000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
    31.060] (II) Open ACPI successful (/var/run/acpid.socket)
    31.060] (II) "extmod" will be loaded by default.
    31.060] (II) "dbe" will be loaded by default.
    31.060] (II) "glx" will be loaded by default.
    31.060] (II) "record" will be loaded by default.
    31.060] (II) "dri" will be loaded by default.
    31.060] (II) "dri2" will be loaded by default.
    31.060] (II) LoadModule: "extmod"
    31.107] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
    31.107] (II) Module extmod: vendor="X.Org Foundation"
    31.107]     compiled for 1.12.3, module version = 1.0.0
    31.107]     Module class: X.Org Server Extension
    31.107]     ABI class: X.Org Server Extension, version 6.0
    31.107] (II) Loading extension MIT-SCREEN-SAVER
    31.107] (II) Loading extension XFree86-VidModeExtension
    31.107] (II) Loading extension XFree86-DGA
    31.107] (II) Loading extension DPMS
    31.107] (II) Loading extension XVideo
    31.107] (II) Loading extension XVideo-MotionCompensation
    31.107] (II) Loading extension X-Resource
    31.107] (II) LoadModule: "dbe"
    31.108] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
    31.108] (II) Module dbe: vendor="X.Org Foundation"
    31.108]     compiled for 1.12.3, module version = 1.0.0
    31.108]     Module class: X.Org Server Extension
    31.108]     ABI class: X.Org Server Extension, version 6.0
    31.108] (II) Loading extension DOUBLE-BUFFER
    31.108] (II) LoadModule: "glx"
    31.109] (II) Loading /usr/lib64/xorg/modules/updates/extensions/libglx.so
    31.109] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    31.109]     compiled for 6.9.0, module version = 1.0.0
    31.109] (II) Loading extension GLX
    31.109] (II) LoadModule: "record"
    31.110] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
    31.110] (II) Module record: vendor="X.Org Foundation"
    31.111]     compiled for 1.12.3, module version = 1.13.0
    31.111]     Module class: X.Org Server Extension
    31.111]     ABI class: X.Org Server Extension, version 6.0
    31.111] (II) Loading extension RECORD
    31.111] (II) LoadModule: "dri"
    31.112] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
    31.112] (II) Module dri: vendor="X.Org Foundation"
    31.112]     compiled for 1.12.3, module version = 1.0.0
    31.112]     ABI class: X.Org Server Extension, version 6.0
    31.112] (II) Loading extension XFree86-DRI
    31.112] (II) LoadModule: "dri2"
    31.113] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
    31.113] (II) Module dri2: vendor="X.Org Foundation"
    31.113]     compiled for 1.12.3, module version = 1.2.0
    31.113]     ABI class: X.Org Server Extension, version 6.0
    31.113] (II) Loading extension DRI2
    31.113] (II) LoadModule: "fglrx"
    31.114] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
    32.240] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    32.240]     compiled for 1.4.99.906, module version = 8.97.2
    32.240]     Module class: X.Org Video Driver
    32.241] (II) Loading sub module "fglrxdrm"
    32.241] (II) LoadModule: "fglrxdrm"
    32.242] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
    32.242] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    32.242]     compiled for 1.4.99.906, module version = 8.97.2
    32.242] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
    32.242] (II) ATI Proprietary Linux Driver Release Identifier: 8.97.100.3                           
    32.242] (II) ATI Proprietary Linux Driver Build Date: Jul  3 2012 23:56:30
    32.242] (++) using VT number 7

    32.242] (WW) Falling back to old probe method for fglrx
    32.280] (II) Loading PCS database from /etc/ati/amdpcsdb
    32.413] (--) Chipset Supported AMD Graphics Processor (0x9553) found
    32.439] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
    32.440] (II) AMD Video driver is running on a device belonging to a group targeted for this release
    32.440] (II) AMD Video driver is signed
    32.440] (II) fglrx(0): pEnt->device->identifier=0x1dede70
    32.440] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
    32.440] (II) Loading sub module "vgahw"
    32.440] (II) LoadModule: "vgahw"
    32.451] (II) Loading /usr/lib64/xorg/modules/libvgahw.so
    32.452] (II) Module vgahw: vendor="X.Org Foundation"
    32.452]     compiled for 1.12.3, module version = 0.1.0
    32.452]     ABI class: X.Org Video Driver, version 12.0
    32.452] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    32.452] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    32.452] (==) fglrx(0): Default visual is TrueColor
    32.452] (**) fglrx(0): Option "DPMS" "true"
    32.452] (==) fglrx(0): RGB weight 888
    32.452] (II) fglrx(0): Using 8 bits per RGB 
    32.452] (==) fglrx(0): Buffer Tiling is ON
    32.452] (II) Loading sub module "fglrxdrm"
    32.452] (II) LoadModule: "fglrxdrm"
16

Dort wird der 3.4 er Kernel aus openSUSE 12.2 angezeigt, das Heißt die Datei wurde noch von openSUSE 12.2 angelegt und nicht von openSUSE 13.1.

17

Was muss ich denn jetzt tun?

18

Den PC mit openSUSE 13.1 starten.

19

Geh nochmal in YaST->System->Bootloader->Bootloader-Optionen und stelle sicher, dass die Option “Fremdes OS testen” aktiviert ist.
Dann “OK” klicken und der Windows-Eintrag sollte eigentlich da sein.

Außerdem schau in YaST->Online Updates, ob alle Updates installiert sind.
Es gab ein Problem, dass Windows-Installationen unter gewissen Umständen nicht erkannt wurden. Das wurde durch ein Update im Jänner behoben.

Das mit dem Xorg.0.log find ich allerdings seltsam. Die Datei ist vom 17. Jänner 2013:

    31.058] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 17 19:25:32 2013

Die sollte aber bei jedem Boot neu angelegt werden.

Kannst du bitte mal die Ausgabe von folgendem posten?

ls -l /var/log/Xorg*

Irgendwie scheint der Radeon Treiber nicht zu funktionieren bzw. wird nicht verwendet.
Die Ausgabe von glxinfo zeigt, dass du Mesa’s Software Renderer verwendest, das kann natürlich auch zu einer höheren Temperatur führen.

direct rendering: Yes
    GL_NV_conditional_render, GL_NV_fog_distance, GL_NV_light_max_exponent,
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.3, 128 bits)
20

Hallo zusammen,

zunächst für Sauerland:

Den PC mit openSUSE 13.1 starten.

Jetzt komme ich durcheinander, was anderes mache ich doch nicht, dachte ich.
Darum habe ich doch die Probleme mit openSUSE 13.1 (Bottle) (x86_64) 64-Bit und Gnome 3.10.2.:cry:

uname -a
Linux linux-1lyq.site 3.11.10-17-desktop #1 SMP PREEMPT Mon Jun 16 15:28:13 UTC 2014 (fba7c1f) x86_64 x86_64 x86_64 GNU/Linux

Jetzt für wolfi:

[QUOTE=wolfi323;2655218]Geh nochmal in YaST->System->Bootloader->Bootloader-Optionen und stelle sicher, dass die Option “Fremdes OS testen” aktiviert ist.
Dann “OK” klicken und der Windows-Eintrag sollte eigentlich da sein.

Ja, das habe ich schon recherchiert und hinbekommen. Seltsam, dass sich das von selbst verstellt.

Außerdem schau in YaST->Online Updates, ob alle Updates installiert sind.
Es gab ein Problem, dass Windows-Installationen unter gewissen Umständen nicht erkannt wurden. Das wurde durch ein Update im Jänner behoben.

Ja, Software habe ich zwischendurch immer wieder aktualisiert wenn es vorgeschlagen wurde, im Moment gibt es keines weiteren Patches angezeigt.

Das mit dem Xorg.0.log find ich allerdings seltsam. Die Datei ist vom 17. Jänner 2013:

    31.058] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 17 19:25:32 2013

Die sollte aber bei jedem Boot neu angelegt werden.

Kannst du bitte mal die Ausgabe von folgendem posten?

ls -l /var/log/Xorg*

ls -l /var/log/Xorg*
-rw-r--r-- 1 root root 43047 22. Jul 16:29 /var/log/Xorg.0.log
-rw-r--r-- 1 root root 42043 22. Jul 15:15 /var/log/Xorg.0.log.old
-rw-r--r-- 1 root root  5696 22. Jun 22:42 /var/log/Xorg.1.log
-rw-r--r-- 1 root root  5696 22. Jun 13:57 /var/log/Xorg.1.log.old
-rw-r--r-- 1 root root  5696 22. Jun 22:42 /var/log/Xorg.2.log
-rw-r--r-- 1 root root  5696 22. Jun 13:57 /var/log/Xorg.2.log.old
-rw-r--r-- 1 root root  5696 22. Jun 22:42 /var/log/Xorg.3.log
-rw-r--r-- 1 root root  5696 22. Jun 13:57 /var/log/Xorg.3.log.old
-rw-r--r-- 1 root root  5696 22. Jun 22:42 /var/log/Xorg.4.log
-rw-r--r-- 1 root root  5696 22. Jun 13:57 /var/log/Xorg.4.log.old
-rw-r--r-- 1 root root  5696 22. Jun 22:42 /var/log/Xorg.5.log
-rw-r--r-- 1 root root  5696 22. Jun 13:57 /var/log/Xorg.5.log.old

Irgendwie scheint der Radeon Treiber nicht zu funktionieren bzw. wird nicht verwendet.
Die Ausgabe von glxinfo zeigt, dass du Mesa’s Software Renderer verwendest, das kann natürlich auch zu einer höheren Temperatur führen.

Das mit dem Mesa Software Renderer ist keine Absicht von mir.:wink:

direct rendering: Yes
    GL_NV_conditional_render, GL_NV_fog_distance, GL_NV_light_max_exponent,
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.3, 128 bits)