This post is about an n52te Belikn device. Suse 11.1 x64.
The device is working. Its much fun to play games under Linux with it. The OS is recognizing all of its signals.
The problem with it is, that if I reboot my PC the device needs to replugged from the USB because the Linux can not see it at all.
I googled the internet for the problem an on a BSD mailing thread I found the hint that turning on the “legacy USB support” in BIOS can be useful.
I can not find out anything to google for now. Any suggestions? Thx in advance.
This might helps!
bigb@linux-wsem:~> ls -l /dev/input
összesen 0
drwxr-xr-x 2 root root 60 jan 27 09.34 by-id
drwxr-xr-x 2 root root 140 jan 27 09.34 by-path
crw-rw----+ 1 root users 13, 64 jan 27 09.34 event0
crw-rw---- 1 root users 13, 65 jan 27 09.34 event1
crw-rw---- 1 root users 13, 66 jan 27 09.34 event2
crw-rw---- 1 root users 13, 67 jan 27 09.34 event3
crw-rw---- 1 root users 13, 68 jan 27 09.34 event4
crw-rw---- 1 root users 13, 69 jan 27 09.34 event5
crw-r----- 1 root root 13, 63 jan 27 09.34 mice
crw-r----- 1 root root 13, 32 jan 27 09.34 mouse0
crw-rw---- 1 root users 10, 223 jan 27 09.34 uinput
bigb@linux-wsem:~> ls -l /dev/input
összesen 0
drwxr-xr-x 2 root root 120 jan 27 12.26 by-id
drwxr-xr-x 2 root root 200 jan 27 12.26 by-path
crw-rw----+ 1 root users 13, 64 jan 27 09.34 event0
crw-rw---- 1 root users 13, 65 jan 27 09.34 event1
crw-rw---- 1 root users 13, 66 jan 27 09.34 event2
crw-rw---- 1 root users 13, 67 jan 27 09.34 event3
crw-rw---- 1 root users 13, 68 jan 27 09.34 event4
crw-rw---- 1 root users 13, 69 jan 27 09.34 event5
crw-rw---- 1 root users 13, 70 jan 27 12.26 event6
crw-rw----+ 1 root users 13, 71 jan 27 12.26 event7
crw-r----- 1 root root 13, 63 jan 27 09.34 mice
crw-r----- 1 root root 13, 32 jan 27 09.34 mouse0
crw-r----- 1 root root 13, 33 jan 27 12.26 mouse1
crw-rw---- 1 root users 10, 223 jan 27 09.34 uinput
No suggestions at all? 
Do you know a good linux-hardvare forum?
re. I am back… 
still haveing this issue with my suse 11.3 now!
I dualboot to windófs and it works just fine there. The device is active durring the OS gets loaded. There needs to be someting with my usb settings.
If I could be able to solve this with a startup scrip I would be happy too.