My printer is printing but cannot connect to HPLIP as it shows device communication error.
i am using
**Asus X555LJ laptop
I5 fifth generation
**KDE
Leap 15.3
sudo hp-check
[sudo] password for root:
Saving output in log file: /home/pradeep/hp-check.log
HP Linux Imaging and Printing System (ver. 3.22.4)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
- Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine
if the proper dependencies are installed to successfully compile HPLIP. - Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built
HPLIP supplied tarball has the proper dependencies installed to successfully run. - Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and
run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
| SYSTEM INFO |
|---|
Kernel: 5.3.18-150300.59.76-default #1 SMP Thu Jun 16 04:23:47 UTC 2022 (2cc2ade) GNU/Linux
Host: home
Proc: 5.3.18-150300.59.76-default #1 SMP Thu Jun 16 04:23:47 UTC 2022 (2cc2ade) GNU/Linux
Distribution: 3 15.3
Bitness: 64 bit
| HPLIP CONFIGURATION |
|---|
HPLIP-Version: HPLIP 3.22.4
HPLIP-Home: /usr/share/hplip
HPLIP-Installation: Auto installation is supported for suse distro 15.3 version
Current contents of ‘/etc/hp/hplip.conf’ file:
hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.22.4
Current contents of ‘/var/lib/hp/hplip.state’ file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of ‘~/.hplip/hplip.conf’ file:
warning: Could not access file: No such file or directory
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
| External Dependencies |
|---|
cups CUPS - Common Unix Printing System REQUIRED 1.1 2.2.7 OK
‘CUPS Scheduler is running’
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.52
OK -
(xsane:16505): Gtk-WARNING : 19:48:42.070: cannot open display:
** error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - INCO
MPAT ‘xsane needs to be installed’
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.32 OK
-
dbus DBus - Message bus system REQUIRED - 1.12.2 OK
-
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.116 OK
-
network network -wget OPTIONAL - 1.20.3 OK
-
** error: avahi-utils avahi-utils OPTIONAL - - MISS**
ING ‘avahi-utils needs to be installed’
| General Dependencies |
|---|
libjpeg libjpeg - JPEG library REQUIRED - - OK
-
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.2.7 OK
-
cups-image CUPS image - CUPS image development files REQUIRED - 2.2.7 OK
-
libpthread libpthread - POSIX threads library REQUIRED - b’2.31’ OK
-
** error: libusb libusb - USB library REQUIRED - 1.0 MISS**
ING ‘libusb needs to be installed’
sane SANE - Scanning library REQUIRED - - OK
-
** error: sane-devel SANE - Scanning library development files REQUIRED - - MISS**
ING ‘sane-devel needs to be installed’
** error: libavahi-dev libavahi-dev REQUIRED - - MISS**
ING ‘libavahi-dev needs to be installed’
** error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.7.3 M**
ISSING ‘libnetsnmp-devel needs to be installed’
** error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 MISS**
ING ‘libcrypto needs to be installed’
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.6.15 OK
-
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - -
OK -
python3-pyqt5-dbus PyQt 5 DBus - DBus Support for PyQt5 OPTIONAL 5.0 5.13.1 OK
-
python3-pyqt5 PyQt 5- Qt interface for Python (for Qt version 4.x) REQUIRED 5.0 5.13.1 OK
-
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK
-
python3-xml Python XML libraries REQUIRED - 2.2.5 OK
-
python3-devel Python devel - Python development files REQUIRED 2.2 3.6.15 OK
-
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 8.4
.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.6.7 OK
-
| COMPILEDEP |
|---|
libtool libtool - Library building support services REQUIRED - 2.4.6 OK
-
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 7.5.0 OK
-
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.2.1 OK
-
| Python Extentions |
|---|
cupsext CUPS-Extension REQUIRED - 3.22.4 OK
-
hpmudext IO-Extension REQUIRED - 3.22.4 OK
-
| Scan Configuration |
|---|
hpaio HPLIP-SANE-Backend REQUIRED - 3.22.4 OK
‘hpaio found in /etc/sane.d/dll.conf’
error: NOT FOUND OR FAILED TO LOAD! Please reinstall HPLIP and check for the proper installation of scanext.
** error: scanext Scan-SANE-Extension REQUIRED - 3.22.4 MISS**
ING ‘scanext needs to be installed’
| DISCOVERED SCANNER DEVICES |
|---|
device `hpaio:/usb/Deskjet_Ink_Adv_2060_K110?serial=CN12E33M9D05M9’ is a Hewlett-Packard Deskjet_Ink_Adv_2060_K110 all-in-one
| DISCOVERED USB DEVICES |
|---|
Device URI Model
hp:/usb/Deskjet_Ink_Adv_2060_K110?serial=CN12E33M9D05M HP Deskjet Ink Adv 2060 K110
9
| INSTALLED CUPS PRINTER QUEUES |
|---|
Deskjet_Ink_Adv_2060_K110
-------------------------
Type: Printer
Device URI: hp:/usb/Deskjet_Ink_Adv_2060_K110?serial=CN12E33M9D05M9
PPD: /etc/cups/ppd/Deskjet_Ink_Adv_2060_K110.ppd
PPD Description: HP Deskjet Ink Adv 2060 k110, hpcups 3.22.4
Printer status: printer Deskjet_Ink_Adv_2060_K110 is idle. enabled since Tue 05 Jul 2022 07:36:36 PM IST
Communication status: Good
hpdeskjetinkadv2060k110
-----------------------
Type: Printer
Device URI: hp:/usb/Deskjet_Ink_Adv_2060_K110?serial=CN12E33M9D05M9
PPD: /etc/cups/ppd/hpdeskjetinkadv2060k110.ppd
PPD Description: HP Deskjet Ink Adv 2060 k110, hpcups 3.22.4
Printer status: printer hpdeskjetinkadv2060k110 is idle. enabled since Tue 05 Jul 2022 05:52:31 PM IST
Communication status: Good
| PERMISSION |
|---|
USB Deskjet_Ink_Adv_2060_K110 Required - - OK Node:’/dev/bus/usb/001/011’ Perm:’ root lp
rw- rw- rw- rw- r–’
| SUMMARY |
|---|
Missing Required Dependencies
-----------------------------
**error: ‘libusb-1_0-devel’ package is missing/incompatible **
**error: ‘libusb-1_0-0’ package is missing/incompatible **
**error: ‘sane-backends-devel’ package is missing/incompatible **
**error: ‘libavahi-devel’ package is missing/incompatible **
**error: ‘net-snmp-devel’ package is missing/incompatible **
**error: ‘openssl’ package is missing/incompatible **
Missing Optional Dependencies
-----------------------------
**error: ‘xsane’ package is missing/incompatible **
**error: ‘avahi-utils’ package is missing/incompatible **
Total Errors: 8
Total Warnings: 1