Hi all
I have a Server with openSuSE 11.1. This Server has 8 interfaces. A Windows 2008 Server is at eth7 connected. On the Windows Server a Ghostcast (Multicast) Server is running. At eth5 I have running a notebook with ghost client. My Problem is that the multicast routing not work. On the Server pimd is running.
Here is a part of pimd log
---------------------------RP-Set----------------------------
Current BSR address: 10.7.0.1
RP-address Incoming Group prefix Priority Holdtime
10.7.0.1 9 224/4 20 65
14:09:40.728 SENT PIM v2 Hello from 10.7.0.1 to 224.0.0.13
14:09:40.728 SENT PIM v2 Hello from 10.5.0.1 to 224.0.0.13
Virtual Interface Table
Vif Local-Address Subnet Thresh Flags Neighbors
0 10.8.0.1 10.8/16 1 DISABLED
1 10.7.0.1 10.7/16 1 DR NO-NBR
2 10.6.0.1 10.6/16 1 DISABLED
3 10.5.0.1 10.5/16 1 DR NO-NBR
4 10.10.21.102 10.10.21/24 1 DISABLED
5 10.4.0.1 10.4/16 1 DISABLED
6 10.3.0.1 10.3/16 1 DISABLED
7 10.2.0.1 10.2/16 1 DISABLED
8 10.1.0.1 10.1/16 1 DISABLED
9 10.7.0.1 register_vif0 1
Multicast Routing Table
Source Group RP-addr Flags
---------------------------(*,G)----------------------------
INADDR_ANY 224.77.0.0 10.7.0.1 WC RP
Joined oifs: …
Pruned oifs: …
Leaves oifs: .l…
Asserted oifs: …
Outgoing oifs: .o…
Incoming : …I
Any hints, suggetions or a how-to “setting up multicast routing” are very appreciated.
Best regards, Roli.