Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) DRI

Не могу настроить DRI на сервере.
Операционная система SUSE 11.3 x64
lspci -v

[LEFT]02:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) (prog-if 00 [VGA controller])
Subsystem: ServerEngines Corp. Device 0100
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at f8000000 (32-bit, prefetchable) [size=16]
Memory at fbdfc000 (32-bit, non-prefetchable) [size=16]
Memory at fb000000 (32-bit, non-prefetchable) [size=8]
Expansion ROM at fbde0000 [disabled] [size=64]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] Express Legacy Endpoint, MSI 00
Capabilities: [54] MSI: Enable- Count=1/1 Maskable- 64bit-[/LEFT]

Лог Xorg

3691.147] (II) Loading sub module “fb”
3691.147] (II) LoadModule: “fb”
3691.148] (II) Loading /usr/lib64/xorg/modules/libfb.so
3691.148] (II) Module fb: vendor=“X.Org Foundation”
3691.148] compiled for 1.8.0, module version = 1.0.0
3691.148] ABI class: X.Org ANSI C Emulation, version 0.4
3691.148] (II) Loading sub module “xaa”
3691.148] (II) LoadModule: “xaa”
3691.149] (II) Loading /usr/lib64/xorg/modules/libxaa.so
3691.149] (II) Module xaa: vendor=“X.Org Foundation”
3691.149] compiled for 1.8.0, module version = 1.2.1
3691.149] ABI class: X.Org Video Driver, version 7.0
3691.153] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
3691.398] (–) MGA(0): 64 DWORD fifo
3691.444] (==) MGA(0): Default visual is TrueColor
3691.444] (WW) MGA(0): Not supported by hardware, not initializing the DRI
3691.444] (II) MGA(0): Using -615 lines for offscreen memory.
3691.444] (II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
3691.444] Screen to screen bit blits
3691.444] Solid filled rectangles
3691.444] Solid filled trapezoids
3691.444] 8x8 mono pattern filled rectangles
3691.444] 8x8 mono pattern filled trapezoids
3691.444] Indirect CPU to Screen color expansion
3691.444] Screen to Screen color expansion
3691.444] Solid Lines
3691.444] Dashed Lines
3691.444] Scanline Image Writes
3691.444] (==) MGA(0): Backing store disabled
3691.444] (==) MGA(0): Silken mouse enabled
3691.445] (==) MGA(0): DPMS enabled
3691.445] (WW) MGA(0): Direct rendering disabled
3691.445] (==) RandR enabled

настройки xorg.conf

Section “Device”
Identifier “MGA”
VendorName “Matrox”
Driver “mga”
Option “MGASDRAM” “true”
VideoRam 8192
Option “AGPMode” “4”
EndSection

Section “Module”
Load “glx”
Load “dri”
Load “dri2”
EndSection
Section “Screen”
Identifier “Default Screen”
DefaultDepth 16
Subsection “Display”
Depth 16
Modes “1280x1024” “1024x768” “800x600” “640x480”
ViewPort 0 0
EndSubsection

В чем проблема разобраться немогу… Помогите плиз[/size][/size][/size][/size]

По-моему для данной карточки лучше использовать vesa.

И не настроите:

Not supported by hardware, not initializing the DRI

Пробовал. Не получается.