leap 42.3 installed on thinkpad laptop

hwinfo --wlan

15: PCI 300.0: 0282 WLAN controller
[Created at pci.378]
Unique ID: y9sn.1M7X9Je0aV5
Parent ID: qTvu.J9rbDjpoNg4
SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:03:00.0
SysFS BusID: 0000:03:00.0
Hardware Class: network
Model: “Intel Centrino Advanced-N 6205 [Taylor Peak]”
Vendor: pci 0x8086 “Intel Corporation”
Device: pci 0x0085 “Centrino Advanced-N 6205 [Taylor Peak]”
SubVendor: pci 0x8086 “Intel Corporation”
SubDevice: pci 0xc220
Revision: 0x96
Driver: “iwlwifi”
Driver Modules: “iwlwifi”
Device File: wlan0
Features: WLAN
Memory Range: 0xf0c00000-0xf0c01fff (rw,non-prefetchable)
IRQ: 30 (no events)
HW Address: 8c:70:5a:c9:11:e8
Permanent HW Address: 8c:70:5a:c9:11:e8
Link detected: yes
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 5.18 5.2 5.22 5.24 5.26 5.28 5.3 5.32 5.5 5.52 5.54 5.56 5.58 5.6 5.62 5.64 5.66 5.68 5.7 5.745 5.765
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: “pci:v00008086d00000085sv00008086sd0000C220bc02sc80i00”
Driver Info #0:
Driver Status: iwlwifi is active
Driver Activation Cmd: “modprobe iwlwifi”
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #9 (PCI bridge)

Since this does not appear to be a request for help, this thread is closed and being moved to Chit Chat.

Thread moved to Chit Chat and re-opened.

Hello @notdeadyet,

Welcome to the openSUSE forums.

It is not quite clear what you want to say with this listing. Do you have problems or is there another reason to post it?

BTW, the following we send to most new members:

There is an important, but not easy to find feature on the forums.

Please in the future use CODE tags around copied/pasted computer text in a post. It is the # button in the tool bar of the post editor. When applicable copy/paste complete, that is including the prompt, the command, the output and the next prompt.

Regards,