ok…lets get it step by step.
Here all the pings.
- Ping the local ip address.
ping 127.0.0.1
PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data.
64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.034 ms
64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.034 ms
64 bytes from 127.0.0.1: icmp_seq=3 ttl=64 time=0.025 ms
64 bytes from 127.0.0.1: icmp_seq=4 ttl=64 time=0.024 ms
--- 127.0.0.1 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 2997ms
rtt min/avg/max/mdev = 0.024/0.029/0.034/0.006 ms
- Ping the gateway
ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=254 time=1.98 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=254 time=0.700 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=254 time=0.808 ms
64 bytes from 192.168.1.1: icmp_seq=4 ttl=254 time=0.846 ms
--- 192.168.1.1 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3002ms
rtt min/avg/max/mdev = 0.700/1.084/1.984/0.523 ms
- Ping 87.248.113.14 (one of the ipaddress of Yahoo!)
ping 87.248.113.14
PING 87.248.113.14 (87.248.113.14) 56(84) bytes of data.
64 bytes from 87.248.113.14: icmp_seq=1 ttl=55 time=112 ms
64 bytes from 87.248.113.14: icmp_seq=2 ttl=55 time=81.4 ms
64 bytes from 87.248.113.14: icmp_seq=3 ttl=55 time=77.2 ms
64 bytes from 87.248.113.14: icmp_seq=4 ttl=55 time=76.3 ms
--- 87.248.113.14 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 2997ms
rtt min/avg/max/mdev = 76.339/86.939/112.775/15.041 ms
- Ping Yahoo!
ping www.yahoo.com
PING www.yahoo-ht3.akadns.net (87.248.113.14) 56(84) bytes of data.
64 bytes from f1.us.www.vip.ird.yahoo.com (87.248.113.14): icmp_seq=1 ttl=55 time=80.8 ms
64 bytes from f1.us.www.vip.ird.yahoo.com (87.248.113.14): icmp_seq=2 ttl=55 time=80.6 ms
64 bytes from f1.us.www.vip.ird.yahoo.com (87.248.113.14): icmp_seq=3 ttl=55 time=81.7 ms
64 bytes from f1.us.www.vip.ird.yahoo.com (87.248.113.14): icmp_seq=4 ttl=55 time=78.8 ms
--- www.yahoo-ht3.akadns.net ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3000ms
rtt min/avg/max/mdev = 78.851/80.515/81.752/1.105 ms
- Traceroute 87.248.113.14
traceroute 87.248.113.14
traceroute to 87.248.113.14 (87.248.113.14), 30 hops max, 40 byte packets
1 * * *
2 10.8.28.1 (10.8.28.1) 108.831 ms 107.052 ms 103.825 ms
3 34.Red-81-46-55.staticIP.rima-tde.net (81.46.55.34) 101.818 ms 98.815 ms 96.804 ms
4 So-5-0-0-0-grtmadde2.red.telefonica-wholesale.net.9.16.84.in-addr.arpa (84.16.9.165) 96.041 ms 92.816 ms 119.814 ms
5 So0-0-0-0-grtparix3.red.telefonica-wholesale.net (213.140.36.18) 136.832 ms 134.818 ms 131.840 ms
6 Tiscali-7-1-0-0-grtparix3.red.telefonica-wholesale.net (213.140.53.146) 135.819 ms 132.122 ms 127.989 ms
7 so-2-1-0.dub20.ip.tiscali.net (89.149.187.9) 80.850 ms 81.065 ms 78.063 ms
8 yahoo-overture-gw2.dub20.ip.tiscali.net (213.200.67.202) 83.064 ms 83.063 ms 83.061 ms
9 ge-1-2.bas-b1.ird.yahoo.com (87.248.101.9) 82.047 ms 80.064 ms ge-1-4.bas-b1.ird.yahoo.com (87.248.101.13) 83.049 ms
10 * * *
11 * * *
12 * * *
13 * * *
14 * * *
15 * * *
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
21 * * *
22 * * *
23 * * *
24 * * *
25 * * *
26 * * *
27 * * *
28 * * *
29 * * *
30 * * *
Hello,
it seems I have the same trouble. Except that I had before OpenSuse 10.3 on my laptop where internet works fine and now (fresh installed) OpenSuse 11.
I use a internet connection over wire and a router to which the laptop is directly connected.
I can ping any site, I can even login on another server per ssh but I cannot load any site neither using a browser nor using cmd line tools like wget.
I checked the lan cable and used another one which I use for my current WinXP pc (from which I actually writing these lines) and it is the same trouble, so the cable is fine and the way the router is configured too.
I would be very glad if anyone might give a hint on what may be the problem and how to fix it.
Here is some more info:
collectNWData.sh V0.6.1.4-1
--- Welcher Netzwerkverbindungtyp soll getestet werden?
--- (1) Kabelgebundene Verbindung
--- Welche Netzwerktopologie liegt vor?
--- (2) DSL HW router <---> LinuxClient
--- Auf welchem Rechner wird das Script ausgeführt?
--- (1) LinuxClient
--- Keine offensichtlichen Konfigurationsfehler/-warnungen gefunden. Die Datei %1 oder aber einen Link zu phpfi.com, wo vorher die Datei hochgeladen wurde, im bevorzugten Linux Forum posten
==================================================================================================================
==================================================================================================================
*** uname -a
Linux linux-aajc 2.6.25.5-1.1-pae #1 SMP 2008-06-07 01:55:22 +0200 i686 i686 i386 GNU/Linux
==================================================================================================================
*** SuSE release
openSUSE 11.0 (i586)
VERSION = 11.0
==================================================================================================================
*** /etc/resolv
nameserver 192.168.1.1
==================================================================================================================
*** /etc/hosts
127.0.0.1 localhost
127.0.0.2 linux-aajc.site linux-aajc
==================================================================================================================
*** route
Kernel IP Routentabelle
Ziel Router Genmask Flags Metric Ref Use Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
==================================================================================================================
*** ifconfig
eth0 Link encap:Ethernet Hardware Adresse 00:1D:72:07:C5:69
inet Adresse:192.168.1.4 Bcast:192.168.1.255 Maske:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1320 Metric:1
RX packets:18 errors:0 dropped:0 overruns:0 frame:0
TX packets:43 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:1000
RX bytes:5822 (5.6 Kb) TX bytes:11290 (11.0 Kb)
Interrupt:16
lo Link encap:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:54 errors:0 dropped:0 overruns:0 frame:0
TX packets:54 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:0
RX bytes:12760 (12.4 Kb) TX bytes:12760 (12.4 Kb)
==================================================================================================================
*** ping tests
Ping of 195.135.220.3 OK
Ping of www.suse.de OK
==================================================================================================================
*** PCI devices
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express [14e4:1693] (rev 02)
04:00.0 Network controller [0280]: Broadcom Corporation BCM94311MCG wlan mini-PCI [14e4:4311] (rev 01)
==================================================================================================================
*** USB devices
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
==================================================================================================================
*** List of loaded modules
| ac | acer_wmi | af_packet | agpgart |
| ahci | arc4 | ata_piix | b43 |
| battery | binfmt_misc | button | cdrom |
| cfg80211 | container | crc_ccitt | crypto_blkcipher |
| dm_mod | dock | drm | ecb |
| edd | ehci_hcd | ext3 | fan |
| firmware_class | fuse | i2c_core | i2c_i801 |
| i915 | ieee1394 | input_polldev | intel_agp |
| ip6_tables | iptable_filter | iptable_mangle | iptable_nat |
| ip_tables | ipt_LOG | ipt_REJECT | irda |
| iTCO_vendor_support | iTCO_wdt | jbd | joydev |
| led_class | libata | loop | mac80211 |
| mbcache | microcode | mmc_core | nf_conntrack |
| nf_conntrack_ipv4 | nf_conntrack_netbios_ns | nf_nat | nsc_ircc |
| ohci1394 | output | pcmcia | pcmcia_core |
| processor | rfkill | rfkill_input | rsrc_nonstatic |
| rtc_cmos | rtc_core | rtc_lib | scsi_mod |
| sdhci | sd_mod | serio_raw | sg |
| snd | snd_hda_intel | snd_hwdep | snd_mixer_oss |
| snd_page_alloc | snd_pcm | snd_pcm_oss | snd_seq |
| snd_seq_device | snd_timer | soundcore | sr_mod |
| ssb | tg3 | thermal | tifm_7xx1 |
| tifm_core | uhci_hcd | usbcore | video |
| wmi | x_tables | xt_limit | xt_pkttype |
| xt_state | xt_tcpudp | yenta_socket |
==================================================================================================================
*** cat /etc/sysconfig/network/ifcfg-[earwd]* | egrep -v ".*=''"
==================================================================================================================
*** NWEliza states
IF:eth0 IP:192.168.1.4 IM:1
IF:wlan0 IP: IM:2
DI:2 dI:1 NIC:0 cNiC:1:0 NI:0 cNI:0 PNG:0 DNS:0 MTU:0 NISS:0 IP6:0 KM:0 WLW: 0
Hey people!
Just to tell you I have fix the problem. It was a TCP config. parameter, that seems not to work fine with my router.
I set
sudo echo 0 > /proc/sys/net/ipv4/tcp_window_scaling
and everything starts to work.
Thanks everyone for your help.