I am trying to make a copy of a DVD and keep getting errors. It is not the drive as it worked yesterday with 11.2 and not with 11.3
The error is “cdrecord has no permission to open the device.”
The odd thing is that it happens about 60% of the way through the burn process. It also happens if I run K3B as root.
My user is a member of the users, cdrom, video and disk groups.
Cdrecord belongs to root:root with 777
/dev/cdrom is root:root with 777, sr0 is root:cdrom with 660 it looks like rw- rw- —
K3b version is 2.0.1-1.pm.2.1 and K3b codecs has the same version number.
The error message is extremely long so it is abbreviated.
Devices
-----------------------
LITE-ON DVDRW LH-20A1L BL05 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] %7]
K3b::DataTrackReader
-----------------------
reading sectors 0 to 3697066 with sector size 2048. Length: 3697067 sectors, 7571593216 bytes.
using buffer size of 128 blocks.
Read a total of 3697067 sectors (7571593216 bytes)
System
-----------------------
K3b Version: 2.0.1
KDE Version: 4.4.4 (KDE 4.4.4) "release 2"
QT Version: 4.6.3
Kernel: 2.6.34.7-0.3-desktop
Used versions
-----------------------
cdrecord: 1.1.9
cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'LITE-ON '
Identification : 'DVDRW LH-20A1L '
Revision : 'BL05'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x002B (DVD+R/DL)
Profile: 0x002B (DVD+R/DL) (current)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1068032 = 1043 KB
FIFO size : 4194304 = 4096 KB
Speed set to 11080 KB/s
Track 01: data 7220 MB
Total size: 8292 MB (821:34.22) = 3697067 sectors
Lout start: 8293 MB (821:36/17) = 3697067 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 4173824 Blocks current: 4173824 Blocks remaining: 476757
Starting to write CD/DVD at speed 8.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
dvd_dual_layer_split: read_dvd_structure returns invalid data
Preparing middle zone location for this DVD+R dual layer disc
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 0
Track 01: 0 of 7220 MB written.
Track 01: 1 of 7220 MB written (fifo 98%) [buf 99%] 1.2x.
Track 01: 2 of 7220 MB written (fifo 98%) [buf 99%] 3.9x.
...
Track 01: 4073 of 7220 MB written (fifo 98%) [buf 99%] 8.2x.
Track 01: 4074 of 7220 MB written (fifo 96%) [buf 99%] 8.4x.
Track 01: 4075 of 7220 MB written (fifo 96%) [buf 99%] 8.2x.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 1F D7 E9 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 08 03 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x08 Qual 0x03 (logical unit communication crc error (ultra-dma/32)) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.145s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 4273948672 bytes
Writing time: 554.799s
Average write speed 11.2x.
Min drive buffer fill was 98%
Fixating...
Errno: 5 (Input/output error), close track/session scsi sendcmd: no error
CDB: 5B 00 04 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 72 04 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x72 Qual 0x04 (empty or partially written reserved track) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.005s timeout 1000s
Errno: 5 (Input/output error), close track/session scsi sendcmd: no error
CDB: 5B 00 05 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 72 04 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x72 Qual 0x04 (empty or partially written reserved track) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.005s timeout 1000s
Fixating time: 5.218s
/usr/bin/wodim: fifo had 67383 puts and 67320 gets.
/usr/bin/wodim: fifo was 0 times empty and 23163 times full, min fill was 56%.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=8 -sao driveropts=burnfree -data -tsize=3697067s -
As an aside, what package do I need for K3B to burn audio discs with mp3 files?