Hello.
Cannot write openSUSE-Leap-42.2-DVD to 4.7 Go DVD RW using k3b ( opensuse or Packman )
Linux box is leap 42.2 and has been updated.
At start, k3b freeze after message :
Please reload the medium and press ‘ok’
All checksum are OK.
If you try to close the apply, you get another message
… Application is not responding. …
Then I try with wodim
ASUS-JC-NEW:~> sudo wodim -eject -tao speed=2 dev=/dev/sr0 -v -data /data4_mk_dvd_pub/ktorrent/iso/openSUSE-Leap-42.2-DVD-x86_64/openSUSE-Leap-42.2-DVD-x86_64.iso
TOC Type: 1 = CD-ROM
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'MATSHITA'
Identification : 'BD-CMB UJ160 '
Revision : '1.00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0040 (BD-ROM)
Profile: 0x0012 (DVD-RAM)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0013 (DVD-RW restricted overwrite) (current)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM) (current)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1376256 = 1344 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
FIFO size : 12582912 = 12288 KB
Track 01: data 4181 MB
Total size: 4801 MB (475:42.29) = 2140672 sectors
Lout start: 4801 MB (475:44/22) = 2140672 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
**wodim: WARNING: Could not manage to find medium size, and more than 90 mins of data.**
Speed set to 2770 KB/s
Starting to write CD/DVD at speed 2.0 in real unknown mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Errno: 5 (Input/output error), reserve track scsi sendcmd: no error
CDB: 53 00 00 00 00 00 20 AA 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.005s timeout 40s
wodim: Cannot open new session.
Writing time: 3.371s
wodim: fifo had 191 puts and 0 gets.
wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
ASUS-JC-NEW:~>
The DVD-RW disk is empty but not new.
K3b find it empty.
The DVD-RW has been force formated after the first try which failed.
Using a brand-new DVD succeed.
Here the output.
wodim -eject -tao speed=2 dev=/dev/sr0 -v -data /data4_mk_dvd_pub/ktorrent/iso/openSUSE-Leap-42.2-DVD-x86_64/openSUSE-Leap-42.2-DVD-x86_64.iso
TOC Type: 1 = CD-ROM
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'MATSHITA'
Identification : 'BD-CMB UJ160 '
Revision : '1.00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0014 (DVD-RW sequential recording)
Profile: 0x0040 (BD-ROM)
Profile: 0x0012 (DVD-RAM)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0013 (DVD-RW restricted overwrite) (current)
Profile: 0x0014 (DVD-RW sequential recording) (current)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1376256 = 1344 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
FIFO size : 12582912 = 12288 KB
Track 01: data 4181 MB
Total size: 4801 MB (475:42.29) = 2140672 sectors
Lout start: 4801 MB (475:44/22) = 2140672 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 157824
Speed set to 2770 KB/s
Starting to write CD/DVD at speed 2.0 in real unknown mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01 : xxxx of 4181 MB written ( fifo 100% ) [buf 98%] 2.1x.
Any comment is welcome.