Issues with Firefox on OpenSuse 12.1

[redisnidma]

First of all, wish a Merry Christmas and a happy new year to everyone!

I’ve being experiencing some issue with OpenSuSE 12.1 (fresh install) specifically when using firefox. When opening certain websites (which I suspect rely heavily on flash), the systems hangs and takes me back to the login screen. As of now, I’m forced to use Chromium which doesn’t present the same behavior even though my favorite browser is Firefox.

My system is a HP 6730s laptop with crappy integrated intel graphics. I’m kinda new to Linux OSes, so any help provided would be appreciated.

[nrickert]

I am not having any problems with firefox. I’m using firefox 9.0 (an update came through a few days ago). This is a 64 bit system.

I have not had problems on a 32 bit system either, though I mostly work from this 64 bit system. There were a lot of flash problems in 11.4, but I am not seeing those here.

If you want help, you will need to provide more information:
firefox version;
32 or 64 bit install;
which firefox extensions are you using;
urls of sites with which you are having problems.

If the sites require login before the problem shows up, then it might be difficult to reproduce the problems unless there is somebody here who happens to have a signon for the same site(s).

[redisnidma]

Thanks for the quick reply.

I’m using OpenSuSE 12.1 64-bit and Firefox ver. 9.0 (don’t know if it’s 32 or 64 bit since it was updated through zipper).
Current plugins are the following:

• Packagekit
• NPAPI Plugins Wrapper 1.4.4
• Quicktime Plug-in 7.6.6
• Shockwave Flash ver. 11.1 r102
• Skype Buttons for Kopete
• Gnome Shell Integration
• IcedTea Web Plugin 1.1.3
• DivX Web Player 1.4.0.233
• Adobe Reader 9.4
• Windows Media Player Plugin 10

And about the sites, I’m not quite sure which sites trigger the issue since I usually have multiple tabs open, but I can go through them one by one and see what happens…

[nrickert]

Okay, those are pretty standard extensions. I don’t have the Adobe reader plugin, but otherwise my list looks the same.

When you are looking at the plugins list in firefox, there’s a place where you can select “extensions” to look at firefox extensions.

My guess is that you have not added any, since otherwise you would have realized that was what I was asking about. Some people install dozens of extensions and cause themselves problems. Other folk use very few. I mainly use “noscript” which blocks all javascript unless I enable for a site.

Your firefox will be 64 bit (based on the info you provided).

If you can identify a specific site that causes problem, then I hope some other folk can report their experience with that site.

[SeanMc98]

@redisnidma

First of all, wish a Merry Christmas and a happy new year to everyone!

I’ve being experiencing some issue with OpenSuSE 12.1 (fresh install) specifically when using firefox. When opening certain websites (which I suspect rely heavily on flash), the systems hangs and takes me back to the login screen. As of now, I’m forced to use Chromium which doesn’t present the same behavior even though my favorite browser is Firefox.

My system is a HP 6730s laptop with crappy integrated intel graphics. I’m kinda new to Linux OSes, so any help provided would be appreciated.

A possible source of your problem might be related to http://forums.opensuse.org/english/get-technical-help-here/laptop/468968-firefox-konqueror-crash-opensuse-12-1-a.html. While not everything in that thread may pertain to your situation, you did specify that you have the “crappy integrated intel graphics”, to wit, the Intel 4500MHD found on some models of the HP6720S.

In particular, perform the suggestion in the post http://forums.opensuse.org/english/get-technical-help-here/laptop/468968-firefox-konqueror-crash-opensuse-12-1-a-2.html#post2414177 concerning Xorg.0.log.old.

After you post, we can review the Xorg logs to determine if your problem(s) is/are in the Intel driver.

[redisnidma]

Sorry for the late reply guys, but I was quite busy these few days.

nrickert:
The only extension I have enabled is openSUSE Firefox Extensions 1.0.2.

SeanMC98
So far, it seems that you have it right with this particular bug, since while using Konqueror the issue is repeatable.

Once I have a little more time this evening, I’ll provide the info you requested.

Once again, thanks in advance.

[redisnidma]

Hi Guys:

As suggested, this is the output of the Xorg.0.log.old file:

X.Org X Server 1.10.4
Release Date: 2011-08-19
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
Current Operating System: Linux linux-xdkb.site 3.1.0-1.2-desktop #1 SMP PREEMPT Thu Nov 3 14:45:45 UTC 2011 (187dde0) x86_64
Kernel command line: root=/dev/disk/by-id/ata-FUJITSU_MHZ2160BH_G2_K616T8C3JUD0-part2 resume=/dev/disk/by-id/ata-FUJITSU_MHZ2160BH_G2_K616T8C3JUD0-part1 splash=silent quiet vga=0x317
Build Date: 10 November 2011 03:34:36PM

Current version of pixman: 0.22.0
Before reporting problems, check X.Org Wiki - Home
to make sure that you have the latest version.
Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: “/var/log/Xorg.0.log”, Time: Thu Dec 29 10:34:01 2011
(==) Using config directory: “/etc/X11/xorg.conf.d”
(==) Using system config directory “/usr/share/X11/xorg.conf.d”
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
() |–>Screen “Default Screen Section” (0)
(**) | |–>Monitor “<default monitor>”
(==) No monitor specified for screen “Default Screen Section”.
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) ModulePath set to “/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules”
(II) The server relies on udev to provide the list of input devices.
(II) Loader magic: 0x7d9140
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 10.0
X.Org XInput driver : 12.2
X.Org Server Extension : 5.0
(–) PCI:*(0:0:2:0) 8086:2a42:103c:30e8 rev 7, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x000070f0/8
(–) PCI: (0:0:2:1) 8086:2a43:103c:30e8 rev 7, Mem @ 0xd0400000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: “extmod”
(II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor=“X.Org Foundation”
compiled for 1.10.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 5.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
n (II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: “dbe”
(II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor=“X.Org Foundation”
compiled for 1.10.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 5.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: “glx”
(II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
(II) Module glx: vendor=“X.Org Foundation”
compiled for 1.10.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 5.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: “record”
20.188] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
(II) Module record: vendor=“X.Org Foundation”
compiled for 1.10.4, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 5.0
(II) Loading extension RECORD
(II) LoadModule: “dri”
20.197] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
20.198] (II) Module dri: vendor=“X.Org Foundation”
20.198] compiled for 1.10.4, module version = 1.0.0
20.198] ABI class: X.Org Server Extension, version 5.0
20.198] (II) Loading extension XFree86-DRI
20.198] (II) LoadModule: “dri2”
20.202] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor=“X.Org Foundation”
compiled for 1.10.4, module version = 1.2.0
ABI class: X.Org Server Extension, version 5.0
(II) Loading extension DRI2
(==) Matched intel as autoconfigured driver 0
(==) Matched fbdev as autoconfigured driver 1
(==) Matched vesa as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: “intel”
(II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor=“X.Org Foundation”
compiled for 1.10.4, module version = 2.16.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 10.0
(II) LoadModule: “fbdev”
20.215] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
20.216] (II) Module fbdev: vendor=“X.Org Foundation”
20.216] compiled for 1.10.4, module version = 0.4.2
20.216] ABI class: X.Org Video Driver, version 10.0
20.216] (II) LoadModule: “vesa”
20.222] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor=“X.Org Foundation”
compiled for 1.10.4, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 10.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
(II) FBDEV: driver for framebuffer: fbdev
(II) VESA: driver for VESA chipsets: vesa
(++) using VT number 7

(II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
(WW) Falling back to old probe method for fbdev
(II) Loading sub module “fbdevhw”
(II) LoadModule: “fbdevhw”
(II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
(II) Module fbdevhw: vendor=“X.Org Foundation”
20.259] compiled for 1.10.4, module version = 0.0.2
20.259] ABI class: X.Org Video Driver, version 10.0
20.259] (WW) Falling back to old probe method for vesa
20.259] drmOpenDevice: node name is /dev/dri/card0
20.259] drmOpenDevice: open result is 9, (OK)
20.259] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
20.259] drmOpenDevice: node name is /dev/dri/card0
20.259] drmOpenDevice: open result is 9, (OK)
20.259] drmOpenByBusid: drmOpenMinor returns 9
20.259] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
20.259] (II) intel(0): Creating default Display subsection in Screen section
“Default Screen Section” for depth/fbbpp 24/32
20.259] (==) intel(0): Depth 24, (–) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
(–) intel(0): Chipset: “GM45”
() intel(0): Relaxed fencing enabled
() intel(0): Wait on SwapBuffers? enabled
() intel(0): Triple buffering? enabled
() intel(0): Framebuffer tiled
() intel(0): Pixmaps tiled
() intel(0): 3D buffers tiled
() intel(0): SwapBuffers wait enabled
(==) intel(0): video overlay key set to 0x101fe
(II) intel(0): Output LVDS1 has no monitor section
20.264] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
20.281] (II) intel(0): Output VGA1 has no monitor section
20.304] (II) intel(0): Output DP1 has no monitor section
20.598] (II) intel(0): Output TV1 has no monitor section
20.598] (II) intel(0): EDID for output LVDS1
20.598] (II) intel(0): Manufacturer: LPL Model: 3101 Serial#: 0
20.598] (II) intel(0): Year: 2008 Week: 0
20.598] (II) intel(0): EDID Version: 1.3
20.598] (II) intel(0): Digital Display Input
20.598] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
20.599] (II) intel(0): Gamma: 2.20
20.599] (II) intel(0): No DPMS capabilities specified
20.599] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
20.599] (II) intel(0): First detailed timing is preferred mode
20.599] (II) intel(0): redX: 0.594 redY: 0.349 greenX: 0.325 greenY: 0.543
20.599] (II) intel(0): blueX: 0.157 blueY: 0.139 whiteX: 0.313 whiteY: 0.329
20.599] (II) intel(0): Manufacturer’s mask: 0
20.599] (II) intel(0): Supported detailed timing:
20.599] (II) intel(0): clock: 69.3 MHz Image Size: 331 x 207 mm
20.599] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1352 h_blank_end 1416 h_border: 0
20.599] (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
20.599] (II) intel(0): LGPhilipsLCD
20.599] (II) intel(0): Monitor name: LP154WX4-TLCB
20.599] (II) intel(0): EDID (in hex):
20.599] (II) intel(0): 00ffffffffffff00320c013100000000
20.599] (II) intel(0): 00120103802115780a14659859538b28
20.599] (II) intel(0): 23505400000001010101010101010101
20.599] (II) intel(0): 010101010101121b0088502010303018
20.599] (II) intel(0): 36004bcf100000190000000000000000
20.599] (II) intel(0): 00000000000000000000000000fe004c
20.599] (II) intel(0): 475068696c6970734c43440a000000fc
20.599] (II) intel(0): 004c503135345758342d544c4342002d
20.599] (II) intel(0): EDID vendor “LPL”, prod id 12545
20.599] (II) intel(0): Printing DDC gathered Modelines:
20.599] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1352 1416 800 803 809 816 -hsync -vsync (48.9 kHz)
20.599] (II) intel(0): Not using default mode “320x240” (doublescan mode not supported)
20.599] (II) intel(0): Not using default mode “400x300” (doublescan mode not supported)
20.599] (II) intel(0): Not using default mode “400x300” (doublescan mode not supported)
20.599] (II) intel(0): Not using default mode “512x384” (doublescan mode not supported)
20.599] (II) intel(0): Not using default mode “640x480” (doublescan mode not supported)
20.599] (II) intel(0): Not using default mode “640x512” (doublescan mode not supported)
20.599] (II) intel(0): Not using default mode “800x600” (doublescan mode not supported)
20.599] (II) intel(0): Not using default mode “896x672” (doublescan mode not supported)
20.599] (II) intel(0): Not using default mode “928x696” (doublescan mode not supported)
20.599] (II) intel(0): Not using default mode “960x720” (doublescan mode not supported)
20.599] (II) intel(0): Not using default mode “700x525” (doublescan mode not supported)
20.599] (II) intel(0): Not using default mode “1024x768” (doublescan mode not supported)
20.599] (II) intel(0): Printing probed modes for output LVDS1
20.599] (II) intel(0): Modeline "1280x800"x60.0 69.30 1280 1328 1352 1416 800 803 809 816 -hsync -vsync (48.9 kHz)
20.599] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
20.599] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
20.599] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
20.599] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
20.615] (II) intel(0): EDID for output VGA1
20.627] (II) intel(0): EDID for output DP1
(II) intel(0): EDID for output TV1
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Output TV1 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1280x800
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): Kernel page flipping support detected, enabling
() intel(0): Display dimensions: (330, 210) mm
() intel(0): DPI set to (98, 96)
(II) Loading sub module “fb”
20.921] (II) LoadModule: “fb”
20.921] (II) Loading /usr/lib64/xorg/modules/libfb.so
20.921] (II) Module fb: vendor=“X.Org Foundation”
20.921] compiled for 1.10.4, module version = 1.0.0
20.921] ABI class: X.Org ANSI C Emulation, version 0.4
20.921] (II) Loading sub module “dri2”
20.921] (II) LoadModule: “dri2”
20.926] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
20.926] (II) Module dri2: vendor=“X.Org Foundation”
20.926] compiled for 1.10.4, module version = 1.2.0
20.926] ABI class: X.Org Server Extension, version 5.0
20.927] (II) UnloadModule: “fbdev”
20.927] (II) Unloading fbdev
20.927] (II) UnloadModule: “fbdevhw”
20.927] (II) Unloading fbdevhw
20.927] (II) UnloadModule: “vesa”
20.927] (II) Unloading vesa
20.927] (==) Depth 24 pixmap format is 32 bpp
20.927] (II) intel(0): [DRI2] Setup complete
20.927] (II) intel(0): [DRI2] DRI driver: i965
20.927] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
20.990] (II) UXA(0): Driver registered support for the following operations:
20.990] (II) solid
20.990] (II) copy
20.990] (II) composite (RENDER acceleration)
20.990] (II) put_image
20.990] (II) get_image
20.990] (==) intel(0): Backing store disabled
20.990] (==) intel(0): Silken mouse enabled
20.990] (II) intel(0): Initializing HW Cursor
21.030] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder enabled
n (II) intel(0): Set up textured video
(II) intel(0): [XvMC] xvmc_vld driver initialized.
(II) intel(0): direct rendering: DRI2 Enabled
(==) intel(0): hotplug detection: “enabled”
(–) RandR disabled
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_INTEL_swap_event
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib64/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
() Power Button: Applying InputClass “evdev keyboard catchall”

EDIT:
I had to cut more than half to make it fit due to the 15000 char restriction. I was trying to attach the file but there’s no option to do so.
Sorry if I missed something…

[lssthnzr0]

Subscribing to thread. I have the same issue. HP dv8000 laptop, opensuse 12.1. Firefox 9.0 is slow to load/launch and slow to navigate to ANY page. Have Chrome as well, and it is VERY fast.

[rafter22]

@lssthnzr0

Subscribing to thread. I have the same issue. HP dv8000 laptop, opensuse 12.1. Firefox 9.0 is slow to load/launch and slow to navigate to ANY page. Have Chrome as well, and it is VERY fast.

You can peruse these articles at the Mozilla Support site.

Search | Firefox Help

[SeanMc98]

@redisnidma

Hi Guys:

As suggested, this is the output of the Xorg.0.log.old file:

EDIT:
I had to cut more than half to make it fit due to the 15000 char restriction. I was trying to attach the file but there’s no option to do so.
Sorry if I missed something…

The necessary content from Xorg.0.log.old is at the very end, perhaps the last ~100-200 lines. This would show exactly what transpired in your crash that returned to the login screen.

[redisnidma]

@SeanMc98

The necessary content from Xorg.0.log.old is at the very end, perhaps the last ~100-200 lines. This would show exactly what transpired in your crash that returned to the login screen.

OK, here you go:

19.595] 	Option "XkbRules" "evdev"
19.595] 	Option "XkbModel" "evdev"
19.595] 	Option "XkbLayout" "us"
19.595] 	Option "_source" "server/udev"
19.595] 	Option "name" "AT Translated Set 2 keyboard"
19.595] 	Option "path" "/dev/input/event0"
19.595] 	Option "device" "/dev/input/event0"
19.595] 	Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
19.595] 	Option "driver" "evdev"
19.595] (**) AT Translated Set 2 keyboard: always reports core events
19.595] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
19.595] (--) AT Translated Set 2 keyboard: Found keys
19.595] (II) AT Translated Set 2 keyboard: Configuring as keyboard
19.595] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
19.596] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
19.596] (**) Option "xkb_rules" "evdev"
19.596] (**) Option "xkb_model" "evdev"
19.596] (**) Option "xkb_layout" "us"
19.596] (II) XKB: Reusing cached keymap
19.596] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
19.596] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
19.596] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
19.596] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
19.596] (II) LoadModule: "synaptics"
19.597] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
19.598] (II) Module synaptics: vendor="X.Org Foundation"
19.598] 	compiled for 1.10.4, module version = 1.5.0
19.598] 	Module class: X.Org XInput Driver
19.598] 	ABI class: X.Org XInput driver, version 12.2
19.598] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
19.598] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
19.598] 	Option "_source" "server/udev"
19.598] 	Option "name" "SynPS/2 Synaptics TouchPad"
19.598] 	Option "path" "/dev/input/event1"
19.598] 	Option "device" "/dev/input/event1"
19.598] 	Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input1/event1"
19.598] 	Option "driver" "synaptics"
19.598] 	Option "HorizScrollDelta" "0"
19.598] (**) SynPS/2 Synaptics TouchPad: always reports core events
19.598] (**) Option "Device" "/dev/input/event1"
19.606] (**) Option "Device" "/dev/input/event1"
19.606] port opened successfully
19.610] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
19.610] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
19.610] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
19.610] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
19.610] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
19.610] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
19.610] (**) Option "HorizScrollDelta" "0"
19.614] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
19.614] (**) SynPS/2 Synaptics TouchPad: always reports core events
19.618] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input1/event1"
19.618] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
19.618] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
19.618] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
19.618] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
19.618] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
19.618] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
19.618] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
19.618] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
19.618] (**) Option "Device" "/dev/input/event1"
19.618] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
19.618] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
19.619] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
19.619] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event6)
19.619] (II) No input driver/identifier specified (ignoring)
19.619] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
19.619] (II) No input driver/identifier specified (ignoring)
19.620] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
19.620] (II) No input driver/identifier specified (ignoring)
19.621] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event8)
19.621] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
19.621] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
19.621] (**) HP WMI hotkeys: Applying InputClass "LocalKeyboard"
19.622] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
19.622] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
19.622] 	Option "XkbRules" "evdev"
19.622] 	Option "XkbModel" "evdev"
19.622] 	Option "XkbLayout" "us"
19.622] 	Option "_source" "server/udev"
19.622] 	Option "name" "HP WMI hotkeys"
19.622] 	Option "path" "/dev/input/event8"
19.622] 	Option "device" "/dev/input/event8"
19.622] 	Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
19.622] 	Option "driver" "evdev"
19.622] (**) HP WMI hotkeys: always reports core events
19.622] (**) HP WMI hotkeys: Device: "/dev/input/event8"
19.622] (--) HP WMI hotkeys: Found keys
19.622] (II) HP WMI hotkeys: Configuring as keyboard
19.622] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
19.622] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD)
19.622] (**) Option "xkb_rules" "evdev"
19.622] (**) Option "xkb_model" "evdev"
19.622] (**) Option "xkb_layout" "us"
19.622] (II) XKB: Reusing cached keymap
19.633] (II) intel(0): EDID vendor "LPL", prod id 12545
19.633] (II) intel(0): Printing DDC gathered Modelines:
19.633] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1352 1416  800 803 809 816 -hsync -vsync (48.9 kHz)
21.449] (II) intel(0): EDID vendor "LPL", prod id 12545
21.462] (II) intel(0): Printing DDC gathered Modelines:
21.462] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1352 1416  800 803 809 816 -hsync -vsync (48.9 kHz)
21.779] (II) intel(0): EDID vendor "LPL", prod id 12545
21.779] (II) intel(0): Printing DDC gathered Modelines:
21.779] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1352 1416  800 803 809 816 -hsync -vsync (48.9 kHz)
22.077] (II) intel(0): EDID vendor "LPL", prod id 12545
22.077] (II) intel(0): Printing DDC gathered Modelines:
22.077] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1352 1416  800 803 809 816 -hsync -vsync (48.9 kHz)
22.354] (II) intel(0): EDID vendor "LPL", prod id 12545
22.354] (II) intel(0): Printing DDC gathered Modelines:
22.354] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1352 1416  800 803 809 816 -hsync -vsync (48.9 kHz)
22.649] (II) intel(0): EDID vendor "LPL", prod id 12545
22.649] (II) intel(0): Printing DDC gathered Modelines:
22.649] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1352 1416  800 803 809 816 -hsync -vsync (48.9 kHz)
35.547] (II) intel(0): EDID vendor "LPL", prod id 12545
35.547] (II) intel(0): Printing DDC gathered Modelines:
35.547] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1352 1416  800 803 809 816 -hsync -vsync (48.9 kHz)
36.032] (II) intel(0): EDID vendor "LPL", prod id 12545
36.032] (II) intel(0): Printing DDC gathered Modelines:
36.032] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1352 1416  800 803 809 816 -hsync -vsync (48.9 kHz)
36.313] (II) intel(0): EDID vendor "LPL", prod id 12545
36.313] (II) intel(0): Printing DDC gathered Modelines:
36.313] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1352 1416  800 803 809 816 -hsync -vsync (48.9 kHz)
36.591] (II) intel(0): EDID vendor "LPL", prod id 12545
36.591] (II) intel(0): Printing DDC gathered Modelines:
36.591] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1352 1416  800 803 809 816 -hsync -vsync (48.9 kHz)
36.904] (II) intel(0): EDID vendor "LPL", prod id 12545
36.904] (II) intel(0): Printing DDC gathered Modelines:
36.904] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1352 1416  800 803 809 816 -hsync -vsync (48.9 kHz)
37.200] (II) intel(0): EDID vendor "LPL", prod id 12545
37.200] (II) intel(0): Printing DDC gathered Modelines:
37.200] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1352 1416  800 803 809 816 -hsync -vsync (48.9 kHz)
41.137] (II) intel(0): EDID vendor "LPL", prod id 12545
41.138] (II) intel(0): Printing DDC gathered Modelines:
41.138] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1352 1416  800 803 809 816 -hsync -vsync (48.9 kHz)

1454.669] (II) intel(0): EDID vendor “LPL”, prod id 12545
1454.669] (II) intel(0): Printing DDC gathered Modelines:
1454.669] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1352 1416 800 803 809 816 -hsync -vsync (48.9 kHz)
6453.851] (II) Power Button: Close
6453.851] (II) UnloadModule: “evdev”
6453.851] (II) Unloading evdev
6453.854] (II) Video Bus: Close
6453.854] (II) UnloadModule: “evdev”
6453.854] (II) Unloading evdev
6453.858] (II) Sleep Button: Close
6453.858] (II) UnloadModule: “evdev”
6453.858] (II) Unloading evdev
6453.867] (II) AT Translated Set 2 keyboard: Close
6453.867] (II) UnloadModule: “evdev”
6453.867] (II) Unloading evdev
6453.877] (II) UnloadModule: “synaptics”
6453.877] (II) Unloading synaptics
6453.880] (II) HP WMI hotkeys: Close
6453.880] (II) UnloadModule: “evdev”
6453.880] (II) Unloading evdev