hai,
i have a configuring my internet after moving.
normally suse would automatically configure it, but now it won’t. i think it has something to do with the internet going through a router with a password on it, but i really dont now how i can configure it.
i’m not really experienced in using suse 11.1, so i hope someone can help me.
thanks
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Can you tell a little more about your router config (what kind of
password and if the connection is wired or wireless) and what method are
you using to connect, ifup or NetworkManager?
VampirD
General Failure is the supreme commander of the Microsoft army.
All operation made by this army ends on him.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.12 (GNU/Linux)
Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/
iEYEARECAAYFAksew3MACgkQuyH6KAqYAt2L3ACdGCSJgFfQloTG8dgIYU1mase3
BiQAnAkcu7XSyi32L3lDQdqbIX282OLl
=4ESd
-----END PGP SIGNATURE-----
i really dont know the difference between ifup and network manager.
i can do both, wireless and with a cable, both don’t work.
password is from the router, with username and password
ok i’ve tried to gain some info on my connexion (ifconfig), and i think the problem is that i don’t have an ip-adress.
also i seem to have two eth devices (eth0 and eth1), both with no ip.
also i tried dmseg and it says something about the usb wireless sender(speedtouch) being read, and also connecting…
well i don’t know what i could do…
[FONT=“Arial Narrow”]this is the result of dmesg:
0.000000] Linux version 2.6.31.5-0.1-desktop (geeko@buildhost) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP PREEMPT 2009-10-26 15:49:03 +0100
0.000000] KERNEL supported cpus:
0.000000] Intel GenuineIntel
0.000000] AMD AuthenticAMD
0.000000] NSC Geode by NSC
0.000000] Cyrix CyrixInstead
0.000000] Centaur CentaurHauls
0.000000] Transmeta GenuineTMx86
0.000000] Transmeta TransmetaCPU
0.000000] UMC UMC UMC UMC
0.000000] BIOS-provided physical RAM map:
0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
0.000000] BIOS-e820: 0000000000100000 - 000000001f688c00 (usable)
0.000000] BIOS-e820: 000000001f688c00 - 000000001f68ac00 (ACPI NVS)
0.000000] BIOS-e820: 000000001f68ac00 - 000000001f68cc00 (ACPI data)
0.000000] BIOS-e820: 000000001f68cc00 - 0000000020000000 (reserved)
0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
0.000000] DMI 2.3 present.
0.000000] last_pfn = 0x1f688 max_arch_pfn = 0x1000000
0.000000] MTRR default type: uncachable
0.000000] MTRR fixed ranges enabled:
0.000000] 00000-9FFFF write-back
0.000000] A0000-BFFFF uncachable
0.000000] C0000-CBFFF write-protect
0.000000] CC000-EFFFF uncachable
0.000000] F0000-FFFFF write-protect
0.000000] MTRR variable ranges enabled:
0.000000] 0 base 000000000 mask FE0000000 write-back
0.000000] 1 base 01F800000 mask FFF800000 uncachable
0.000000] 2 base 01F700000 mask FFFF00000 uncachable
0.000000] 3 disabled
0.000000] 4 disabled
0.000000] 5 disabled
0.000000] 6 disabled
0.000000] 7 disabled
0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
0.000000] Scanning 1 areas for low memory corruption
0.000000] modified physical RAM map:
0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
0.000000] modified: 0000000000006000 - 00000000000a0000 (usable)
0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
0.000000] modified: 0000000000100000 - 000000001f688c00 (usable)
0.000000] modified: 000000001f688c00 - 000000001f68ac00 (ACPI NVS)
0.000000] modified: 000000001f68ac00 - 000000001f68cc00 (ACPI data)
0.000000] modified: 000000001f68cc00 - 0000000020000000 (reserved)
0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
0.000000] modified: 00000000fec00000 - 00000000fed00400 (reserved)
0.000000] modified: 00000000fed20000 - 00000000feda0000 (reserved)
0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved)
0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved)
0.000000] initial memory mapped : 0 - 01000000
0.000000] init_memory_mapping: 0000000000000000-000000001f688000
0.000000] NX (Execute Disable) protection: active
0.000000] 0000000000 - 0000200000 page 4k
0.000000] 0000200000 - 001f600000 page 2M
0.000000] 001f600000 - 001f688000 page 4k
0.000000] kernel direct mapping tables up to 1f688000 @ 7000-12000
0.000000] RAMDISK: 1f03a000 - 1f678784
0.000000] ACPI: RSDP 000febf0 00014 (v00 DELL )
0.000000] ACPI: RSDT 000fcc71 0003C (v01 DELL 5000 00000007 ASL 00000061)
0.000000] ACPI: FACP 000fccad 00074 (v01 DELL 5000 00000007 ASL 00000061)
0.000000] ACPI: DSDT fffc47bb 02FD3 (v01 DELL dt_ex 00001000 MSFT 0100000D)
0.000000] ACPI: FACS 1f688c00 00040
0.000000] ACPI: SSDT fffc78cb 000BA (v01 DELL st_ex 00001000 MSFT 0100000D)
0.000000] ACPI: APIC 000fcd21 00072 (v01 DELL 5000 00000007 ASL 00000061)
0.000000] ACPI: BOOT 000fcd93 00028 (v01 DELL 5000 00000007 ASL 00000061)
0.000000] ACPI: MCFG 000fcdbb 0003E (v01 DELL 5000 00000007 ASL 00000061)
0.000000] ACPI: HPET 000fcdf9 00038 (v01 DELL 5000 00000007 ASL 00000061)
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] could not find any ACPI SRAT memory areas.
0.000000] failed to get NUMA memory information from SRAT table
0.000000] NUMA - single node, flat memory mode
0.000000] Node: 0, start_pfn: 0, end_pfn: 1f688
0.000000] Setting physnode_map array to node 0 for pfns:
0.000000] 0 4000 8000 c000 10000 14000 18000 1c000
0.000000] node 0 pfn: [0 - 1f688]
0.000000] Reserving 1024 pages of KVA for lmem_map of node 0 at 1ec00
0.000000] remove_active_range (0, 125952, 126976)
0.000000] Reserving total of 400 pages for numa KVA remap
0.000000] kva_start_pfn ~ 1e800 max_low_pfn ~ 1f688
0.000000] max_pfn = 1f688
0.000000] 0MB HIGHMEM available.
0.000000] 502MB LOWMEM available.
0.000000] max_low_pfn = 1f688, highstart_pfn = 1f688
0.000000] Low memory ends at vaddr df688000
0.000000] node 0 will remap to vaddr de800000 - dec00000
0.000000] allocate_pgdat: node 0 NODE_DATA de800000
0.000000] remap_numa_kva: node 0
0.000000] remap_numa_kva: de800000 to pfn 0001ec00
0.000000] remap_numa_kva: dea00000 to pfn 0001ee00
0.000000] High memory starts at vaddr df688000
0.000000] mapped low ram: 0 - 1f688000
0.000000] low ram: 0 - 1f688000
0.000000] node 0 low ram: 00000000 - 1f688000
0.000000] node 0 bootmap 0000f000 - 00012ed4
0.000000] (11 early reservations) ==> bootmem [0000000000 - 001f688000]
0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
0.000000] #3 [0000200000 - 0000aeda90] TEXT DATA BSS ==> [0000200000 - 0000aeda90]
0.000000] #4 [001f03a000 - 001f678784] RAMDISK ==> [001f03a000 - 001f678784]
0.000000] #5 [000009f000 - 0000100000] BIOS
reserved ==> [000009f000 - 0000100000]
0.000000] #6 [0000aee000 - 0000af61c4] BRK ==> [0000aee000 - 0000af61c4]
0.000000] #7 [0000007000 - 000000f000] PGTABLE ==> [0000007000 - 000000f000]
0.000000] #8 [001ec00000 - 001f000000] KVA RAM ==> [001ec00000 - 001f000000]
0.000000] #9 [001e800000 - 001ec00000] KVA PG ==> [001e800000 - 001ec00000]
0.000000] #10 [000000f000 - 0000013000] BOOTMAP ==> [000000f000 - 0000013000]
0.000000] found SMP MP-table at [c00fe710] fe710
0.000000] Zone PFN ranges:
0.000000] DMA 0x00000000 → 0x00001000
0.000000] Normal 0x00001000 → 0x0001f688
0.000000] HighMem 0x0001f688 → 0x0001f688
0.000000] Movable zone start PFN for each node
0.000000] early_node_map[4] active PFN ranges
0.000000] 0: 0x00000000 → 0x00000002
0.000000] 0: 0x00000006 → 0x000000a0
0.000000] 0: 0x00000100 → 0x0001ec00
0.000000] 0: 0x0001f000 → 0x0001f688
0.000000] On node 0 totalpages: 127524
0.000000] free_area_init_node: node 0, pgdat de800000, node_mem_map de802000
0.000000] DMA zone: 32 pages used for memmap
0.000000] DMA zone: 0 pages reserved
0.000000] DMA zone: 3964 pages, LIFO batch:0
0.000000] Normal zone: 974 pages used for memmap
0.000000] Normal zone: 122554 pages, LIFO batch:31
0.000000] Using APIC driver default
0.000000] ACPI: PM-Timer IO Port: 0x808
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0
global_irq 2 dfl dfl)
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
0.000000] ACPI: IRQ0 used by override.
0.000000] ACPI: IRQ2 used by override.
0.000000] ACPI: IRQ9 used by override.
0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
0.000000] Using ACPI (MADT) for SMP configuration information
0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs
0.000000] nr_irqs_gsi: 24
0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:c0000000)
0.000000] NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:8
0.000000] PERCPU: Embedded 14 pages at c1003000, static data 34204 bytes
0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 126518
0.000000] Policy zone: Normal
0.000000] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD1600JS-56MHB1_WD-WCANMD177728-part2 resume=/dev/disk/by-id/ata-WDC_WD1600JS-56MHB1_WD-WCANMD177728-part1 splash=silent quiet vga=0x317
0.000000] bootsplash: silent mode.
0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
0.000000] Enabling fast FPU save and restore… done.
0.000000] Enabling unmasked SIMD FPU exception support… done.
0.000000] Initializing CPU#0
0.000000] Initializing HighMem for node 0 (00000000:00000000)
0.000000] Memory: 489724k/514592k available (4719k kernel code, 24464k reserved, 2944k data, 464k init, 0k highmem)
0.000000] virtual kernel memory layout:
0.000000] fixmap : 0xff5b5000 - 0xfffff000 (10536 kB)
0.000000] pkmap : 0xff000000 - 0xff200000 (2048 kB)
0.000000] vmalloc : 0xdfe88000 - 0xfeffe000 ( 497 MB)
0.000000] lowmem : 0xc0000000 - 0xdf688000 ( 502 MB)
0.000000] .init : 0xc097d000 - 0xc09f1000 ( 464 kB)
0.000000] .data : 0xc069bd42 - 0xc097c008 (2944 kB)
0.000000] .text : 0xc0200000 - 0xc069bd42 4719 kB)
0.000000] Checking if this processor honours the WP bit even in supervisor mode…Ok.
0.000000] Hierarchical RCU implementation.
0.000000] NR_IRQS:2304 nr_irqs:440
0.000000] Fast TSC calibration using PIT
0.000000] Detected 2792.828 MHz processor.
0.000112] Console: colour dummy device 80x25
0.000118] console [tty0] enabled
0.000270] hpet clockevent registered
0.000276] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
0.000282] Calibrating delay loop (skipped), value calculated using timer frequency.. 5585.65 BogoMIPS (lpj=2792828)
0.003196] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
0.003295] Security Framework initialized
0.003320] AppArmor: AppArmor initialized
0.003352] Mount-cache hash table entries: 512
0.003552] CPU: Trace cache: 12K uops, L1 D cache: 16K
0.003557] CPU: L2 cache: 1024K
0.003561] CPU: Physical Processor ID: 0
0.003563] CPU: Processor Core ID: 0
0.003568] mce: CPU supports 4 MCE banks
0.003582] CPU0: Thermal monitoring enabled (TM1)
0.003588] using mwait in idle threads.
0.003597] Performance Counters: no PMU driver, software counters only.
0.003609] Checking 'hlt' instruction... OK.
0.007727] SMP alternatives: switching to UP code
0.018575] ACPI: Core revision 20090521
0.069082] Mapping cpu 0 to node 0
0.069259] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
0.079270] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
0.079987] Brought up 1 CPUs
0.079987] Total of 1 processors activated (5585.65 BogoMIPS).
0.079987] CPU0 attaching NULL sched-domain.
0.079987] devtmpfs: initialized
0.079987] Booting paravirtualized kernel on bare hardware
0.079987] regulator: core version 0.5
0.079987] Time: 18:21:48 Date: 12/10/09
0.079987] NET: Registered protocol family 16
0.080170] ACPI: bus type pci registered
0.080253] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
0.080258] PCI: MCFG area at e0000000 reserved in E820
0.080260] PCI: Using MMCONFIG for extended config space
0.080263] PCI: Using configuration type 1 for base access
0.081660] bio: create slab <bio-0> at 0
0.082747] ACPI: EC: Look up EC in DSDT
0.112417] ACPI: Interpreter enabled
0.112430] ACPI: (supports S0 S1 S3 S4 S5)
0.112474] ACPI: Using IOAPIC for interrupt routing
0.151249] ACPI: No dock devices found.
0.154424] ACPI: PCI Root Bridge [PCI0] (0000:00)
0.154576] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
0.154581] pci 0000:00:01.0: PME# disabled
0.154615] pci 0000:00:02.0: reg 10 32bit mmio: [0xdff00000-0xdff7ffff]
0.154622] pci 0000:00:02.0: reg 14 io port: [0xe898-0xe89f]
0.154629] pci 0000:00:02.0: reg 18 32bit mmio: [0xc0000000-0xcfffffff]
0.154635] pci 0000:00:02.0: reg 1c 32bit mmio: [0xdfec0000-0xdfefffff]
0.154678] pci 0000:00:02.1: reg 10 32bit mmio: [0xdff80000-0xdfffffff]
0.154800] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
0.154806] pci 0000:00:1c.0: PME# disabled
0.154876] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
0.154881] pci 0000:00:1c.1: PME# disabled
0.154940] pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f]
0.155008] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f]
0.155067] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f]
0.155124] pci 0000:00:1d.3: reg 20 io port: [0xff20-0xff3f]
0.155187] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80800-0xffa80bff]
0.155244] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
0.155250] pci 0000:00:1d.7: PME# disabled
0.155340] pci 0000:00:1e.2: reg 10 io port: [0xec00-0xecff]
0.155348] pci 0000:00:1e.2: reg 14 io port: [0xe8c0-0xe8ff]
0.155356] pci 0000:00:1e.2: reg 18 32bit mmio: [0xdfebfe00-0xdfebffff]
0.155364] pci 0000:00:1e.2: reg 1c 32bit mmio: [0xdfebfd00-0xdfebfdff]
0.155395] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
0.155400] pci 0000:00:1e.2: PME# disabled
0.155475] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
0.155480] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
0.155485] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0c00-0c7f
0.155490] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 00e0-00ef
0.155520] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
0.155529] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
0.155537] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
0.155545] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
0.155553] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
0.155602] pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07]
0.155610] pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13]
0.155617] pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27]
0.155624] pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33]
0.155632] pci 0000:00:1f.2: reg 20 io port: [0xfea0-0xfeaf]
0.155659] pci 0000:00:1f.2: PME# supported from D3hot
0.155664] pci 0000:00:1f.2: PME# disabled
0.155718] pci 0000:00:1f.3: reg 20 io port: [0xe8a0-0xe8bf]0.155790] pci 0000:00:01.0: bridge 32bit mmio: [0xdfd00000-0xdfdfffff]
0.155839] pci 0000:00:1c.0: bridge 32bit mmio: [0xdfc00000-0xdfcfffff]
0.155890] pci 0000:00:1c.1: bridge 32bit mmio: [0xdfb00000-0xdfbfffff]
0.155936] pci 0000:04:00.0: reg 10 io port: [0xdc00-0xdcff]
0.155945] pci 0000:04:00.0: reg 14 32bit mmio: [0xdf9fdf00-0xdf9fdfff]
0.156001] pci 0000:04:00.0: supports D1 D2
0.156005] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
0.156010] pci 0000:04:00.0: PME# disabled
0.156056] pci 0000:04:03.0: reg 10 32bit mmio: [0xdf9fe000-0xdf9fffff]
0.156090] pci 0000:04:03.0: reg 30 32bit mmio: [0xdfa00000-0xdfa03fff]
0.156111] pci 0000:04:03.0: supports D1 D2
0.156114] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot D3cold
0.156120] pci 0000:04:03.0: PME# disabled
0.156165] pci 0000:00:1e.0: transparent bridge
0.156170] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
0.156176] pci 0000:00:1e.0: bridge 32bit mmio: [0xdf900000-0xdfafffff]
0.156206] ACPI: PCI Interrupt Routing Table \_SB_.PCI0._PRT]
0.156585] ACPI: PCI Interrupt Routing Table \_SB_.PCI0.PCI1._PRT]
0.156992] ACPI: PCI Interrupt Routing Table \_SB_.PCI0.PCI2._PRT]
0.157221] ACPI: PCI Interrupt Routing Table \_SB_.PCI0.PCI3._PRT]
0.157448] ACPI: PCI Interrupt Routing Table \_SB_.PCI0.PCI4._PRT]
0.507460] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
0.507852] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
0.508246] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
0.508633] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11 12 15)
0.509031] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
0.509414] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
0.509801] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
0.510195] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
0.510526] SCSI subsystem initialized
0.510601] libata version 3.00 loaded.
0.510719] usbcore: registered new interface driver usbfs
0.510748] usbcore: registered new interface driver hub
0.510787] usbcore: registered new device driver usb
0.510902] PCI: Using ACPI for IRQ routing
0.511113] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
0.511121] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
0.515019] Switched to high resolution mode on CPU 0
0.515503] AppArmor: AppArmor Filesystem Enabled
0.515522] pnp: PnP ACPI init
0.515543] ACPI: bus type pnp registered
0.520538] pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
0.520545] pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
0.543114] pnp: PnP ACPI: found 11 devices
0.543117] ACPI: ACPI bus type pnp unregistered
0.543135] system 00:01: ioport range 0xc00-0xc7f has been reserved
0.543149] system 00:08: iomem range 0x0-0x9ffff could not be reserved
0.543154] system 00:08: iomem range 0x100000-0xffffff could not be reserved
0.543158] system 00:08: iomem range 0x1000000-0x1f688bff could not be reserved
0.543162] system 00:08: iomem range 0xc0000-0xfffff could not be reserved
0.543167] system 00:08: iomem range 0xfec00000-0xfecfffff could not be reserved
0.543171] system 00:08: iomem range 0xfee00000-0xfeefffff has been reserved
0.543175] system 00:08: iomem range 0xfed20000-0xfed9ffff has been reserved
0.543179] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
0.543184] system 00:08: iomem range 0xffc00000-0xffffffff has been reserved
0.543192] system 00:09: ioport range 0x100-0x1fe could not be reserved
0.543197] system 00:09: ioport range 0x200-0x277 has been reserved
0.543201] system 00:09: ioport range 0x280-0x2e7 has been reserved
0.543205] system 00:09: ioport range 0x2f0-0x2f7 has been reserved
0.543209] system 00:09: ioport range 0x300-0x377 could not be reserved
0.543213] system 00:09: ioport range 0x380-0x3bb has been reserved
0.543217] system 00:09: ioport range 0x3c0-0x3e7 has been reserved0.543221] system 00:09: ioport range 0x3f6-0x3f7 could not be reserved
0.543225] system 00:09: ioport range 0x400-0x4cf has been reserved
0.543229] system 00:09: ioport range 0x4d2-0x57f has been reserved
0.543233] system 00:09: ioport range 0x580-0x677 has been reserved
0.543237] system 00:09: ioport range 0x680-0x777 has been reserved
0.543241] system 00:09: ioport range 0x780-0x7bb has been reserved
0.543245] system 00:09: ioport range 0x7c0-0x7ff has been reserved
0.543249] system 00:09: ioport range 0x8e0-0x8ff has been reserved
0.543253] system 00:09: ioport range 0x900-0x9fe has been reserved
0.543257] system 00:09: ioport range 0xa00-0xafe has been reserved
0.543261] system 00:09: ioport range 0xb00-0xbfe has been reserved
0.543265] system 00:09: ioport range 0xc80-0xcaf has been reserved
0.543269] system 00:09: ioport range 0xcb0-0xcbf has been reserved
0.543273] system 00:09: ioport range 0xcc0-0xcf7 has been reserved
0.543282] system 00:09: ioport range 0xd00-0xdfe has been reserved
0.543287] system 00:09: ioport range 0xe00-0xefe has been reserved
0.543291] system 00:09: ioport range 0xf00-0xffe has been reserved
0.543295] system 00:09: ioport range 0x2000-0x20fe has been reserved
0.543299] system 00:09: ioport range 0x2100-0x21fe has been reserved
0.543303] system 00:09: ioport range 0x2200-0x22fe has been reserved
0.543307] system 00:09: ioport range 0x2300-0x23fe has been reserved
0.543312] system 00:09: ioport range 0x2400-0x24fe has been reserved
0.543316] system 00:09: ioport range 0x2500-0x25fe has been reserved
0.543320] system 00:09: ioport range 0x2600-0x26fe has been reserved
0.543324] system 00:09: ioport range 0x2700-0x27fe has been reserved
0.543328] system 00:09: ioport range 0x2800-0x28fe has been reserved
0.543333] system 00:09: ioport range 0x2900-0x29fe has been reserved
0.543337] system 00:09: ioport range 0x2a00-0x2afe has been reserved
0.543341] system 00:09: ioport range 0x2b00-0x2bfe has been reserved
0.543345] system 00:09: ioport range 0x2c00-0x2cfe has been reserved
0.543349] system 00:09: ioport range 0x2d00-0x2dfe has been reserved
0.543353] system 00:09: ioport range 0x2e00-0x2efe has been reserved
0.543358] system 00:09: ioport range 0x2f00-0x2ffe has been reserved
0.543362] system 00:09: ioport range 0x5000-0x50fe has been reserved
0.543366] system 00:09: ioport range 0x5100-0x51fe has been reserved
0.543371] system 00:09: ioport range 0x5200-0x52fe has been reserved
0.543375] system 00:09: ioport range 0x5300-0x53fe has been reserved
0.543379] system 00:09: ioport range 0x5400-0x54fe has been reserved
0.543386] system 00:09: ioport range 0x5500-0x55fe has been reserved
0.543390] system 00:09: ioport range 0x5600-0x56fe has been reserved
0.543395] system 00:09: ioport range 0x5700-0x57fe has been reserved
0.543399] system 00:09: ioport range 0x5800-0x58fe has been reserved
0.543403] system 00:09: ioport range 0x5900-0x59fe has been reserved
0.543408] system 00:09: ioport range 0x5a00-0x5afe has been reserved
0.543412] system 00:09: ioport range 0x5b00-0x5bfe has been reserved
0.543417] system 00:09: ioport range 0x5c00-0x5cfe has been reserved
0.543421] system 00:09: ioport range 0x5d00-0x5dfe has been reserved
0.543425] system 00:09: ioport range 0x5e00-0x5efe has been reserved
0.543430] system 00:09: ioport range 0x5f00-0x5ffe has been reserved
0.543434] system 00:09: ioport range 0x6000-0x60fe has been reserved
0.543439] system 00:09: ioport range 0x6100-0x61fe has been reserved
0.543443] system 00:09: ioport range 0x6200-0x62fe has been reserved
0.543448] system 00:09: ioport range 0x6300-0x63fe has been reserved
0.543452] system 00:09: ioport range 0x6400-0x64fe has been reserved
0.543457] system 00:09: ioport range 0x6500-0x65fe has been reserved
0.543461] system 00:09: ioport range 0x6600-0x66fe has been reserved
0.543466] system 00:09: ioport range 0x6700-0x67fe has been reserved
0.543471] system 00:09: ioport range 0x6800-0x68fe has been reserved
0.543475] system 00:09: ioport range 0x6900-0x69fe has been reserved0.543480] system 00:09: ioport range 0x6a00-0x6afe has been reserved
0.543485] system 00:09: ioport range 0x6b00-0x6bfe has been reserved
0.543490] system 00:09: ioport range 0x6c00-0x6cfe has been reserved
0.543495] system 00:09: ioport range 0x6d00-0x6dfe has been reserved
0.543500] system 00:09: ioport range 0x6e00-0x6efe has been reserved
0.543505] system 00:09: ioport range 0x6f00-0x6ffe has been reserved
0.543510] system 00:09: ioport range 0xa000-0xa0fe has been reserved
0.543515] system 00:09: ioport range 0xa100-0xa1fe has been reserved
0.543520] system 00:09: ioport range 0xa200-0xa2fe has been reserved
0.543525] system 00:09: ioport range 0xa300-0xa3fe has been reserved
0.543530] system 00:09: ioport range 0xa400-0xa4fe has been reserved
0.543535] system 00:09: ioport range 0xa500-0xa5fe has been reserved
0.543541] system 00:09: ioport range 0xa600-0xa6fe has been reserved
0.543546] system 00:09: ioport range 0xa700-0xa7fe has been reserved
0.543554] system 00:09: ioport range 0xa800-0xa8fe has been reserved
0.543561] system 00:09: ioport range 0xa900-0xa9fe has been reserved
0.543566] system 00:09: ioport range 0xaa00-0xaafe has been reserved
0.543571] system 00:09: ioport range 0xab00-0xabfe has been reserved
0.543576] system 00:09: ioport range 0xac00-0xacfe has been reserved
0.543582] system 00:09: ioport range 0xad00-0xadfe has been reserved
0.543587] system 00:09: ioport range 0xae00-0xaefe has been reserved
0.543592] system 00:09: ioport range 0xaf00-0xaffe has been reserved
0.543598] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
0.543602] system 00:09: iomem range 0xfeda0000-0xfedacfff has been reserved
0.578522] pci 0000:04:03.0: BAR 6: address space collision on of device [0xdfa00000-0xdfa03fff]
0.578570] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
0.578574] pci 0000:00:01.0: IO window: disabled
0.578580] pci 0000:00:01.0: MEM window: 0xdfd00000-0xdfdfffff
0.578584] pci 0000:00:01.0: PREFETCH window: disabled
0.578589] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
0.578591] pci 0000:00:1c.0: IO window: disabled
0.578597] pci 0000:00:1c.0: MEM window: 0xdfc00000-0xdfcfffff
0.578602] pci 0000:00:1c.0: PREFETCH window: disabled
0.578607] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
0.578609] pci 0000:00:1c.1: IO window: disabled
0.578615] pci 0000:00:1c.1: MEM window: 0xdfb00000-0xdfbfffff
0.578620] pci 0000:00:1c.1: PREFETCH window: disabled
0.578627] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
0.578632] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
0.578638] pci 0000:00:1e.0: MEM window: 0xdf900000-0xdfafffff
0.578644] pci 0000:00:1e.0: PREFETCH window: 0x20000000-0x200fffff
0.578659] alloc irq_desc for 16 on node 0
0.578663] alloc kstat_irqs on node 0
0.578671] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
0.578677] pci 0000:00:01.0: setting latency timer to 64
0.578687] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 160.578693] pci 0000:00:1c.0: setting latency timer to 64
0.578702] alloc irq_desc for 17 on node 0
0.578705] alloc kstat_irqs on node 0
0.578710] pci 0000:00:1c.1: PCI INT B → GSI 17 (level, low) → IRQ 17
0.578715] pci 0000:00:1c.1: setting latency timer to 64
0.578724] pci 0000:00:1e.0: setting latency timer to 64
0.578731] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
0.578735] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
0.578740] pci_bus 0000:01: resource 1 mem: [0xdfd00000-0xdfdfffff]
0.578745] pci_bus 0000:02: resource 1 mem: [0xdfc00000-0xdfcfffff]
0.578749] pci_bus 0000:03: resource 1 mem: [0xdfb00000-0xdfbfffff]
0.578753] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
0.578756] pci_bus 0000:04: resource 1 mem: [0xdf900000-0xdfafffff]
0.578760] pci_bus 0000:04: resource 2 pref mem [0x20000000-0x200fffff]
0.578763] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
0.578767] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
0.578849] NET: Registered protocol family 2
0.578996] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
0.579432] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
0.579506] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
0.579575] TCP: Hash tables configured (established 16384 bind 16384)
0.579578] TCP reno registered
0.579698] NET: Registered protocol family 1
0.579783] Unpacking initramfs…
0.775916] Freeing initrd memory: 6393k freed
0.779712] Simple Boot Flag value 0x87 read from CMOS RAM was invalid
0.779717] Simple Boot Flag at 0x7a set to 0x1
0.780045] Scanning for low memory corruption every 60 seconds
0.780266] audit: initializing netlink socket (disabled)
0.780285] type=2000 audit(1260469308.780:1): initialized
0.784041] HugeTLB registered 2 MB page size, pre-allocated 0 pages
0.785031] VFS: Disk quotas dquot_6.5.2
0.785075] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
0.785239] msgmni has been set to 242
0.785360] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
0.785365] io scheduler noop registered
0.785368] io scheduler anticipatory registered
0.785371] io scheduler deadline registered
0.785388] io scheduler cfq registered (default)
0.785516] pci 0000:00:02.0: Boot video device
0.786070] alloc irq_desc for 24 on node 0
0.786073] alloc kstat_irqs on node 0
0.786086] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
0.786094] pcieport-driver 0000:00:01.0: setting latency timer to 64
0.787063] alloc irq_desc for 25 on node 0
0.787066] alloc kstat_irqs on node 0
0.787076] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
0.787086] pcieport-driver 0000:00:1c.0: setting latency timer to 64
0.788065] alloc irq_desc for 26 on node 0
0.788069] alloc kstat_irqs on node 0
0.788078] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
0.788088] pcieport-driver 0000:00:1c.1: setting latency timer to 64
0.788233] pci-stub: invalid id string “”
0.788517] vesafb: framebuffer at 0xc0000000, mapped to 0xdff00000, using 3072k, total 7872k
0.788522] vesafb: mode is 1024x768x16, linelength=2048, pages=4
0.788524] vesafb: scrolling: redraw
0.788528] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
0.788732] bootsplash 3.1.6-2004/03/31: looking for picture…
0.800781] bootsplash: silentjpeg size 100573 bytes
0.817978] bootsplash: …found (1024x768, 27393 bytes, v3).
0.863067] Console: switching to colour frame buffer device 124x44
0.908367] fb0: VESA VGA frame buffer device
0.910911] Non-volatile memory driver v1.3
0.910915] Linux agpgart interface v0.103
0.910950] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
0.911091] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
0.911701] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
0.911977] ata_piix 0000:00:1f.1: version 2.13
0.911997] ata_piix 0000:00:1f.1: PCI INT A → GSI 16 (level, low) → IRQ 16
0.912063] ata_piix 0000:00:1f.1: setting latency timer to 64
0.912150] scsi0 : ata_piix
0.912275] scsi1 : ata_piix
0.912323] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
0.912328] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
0.912580] ata2: port disabled. ignoring.
0.913032] alloc irq_desc for 20 on node 0
0.913035] alloc kstat_irqs on node 0
0.913044] ata_piix 0000:00:1f.2: PCI INT C → GSI 20 (level, low) → IRQ 20
0.913051] ata_piix 0000:00:1f.2: MAP P0 P2 P1 P3 ]
1.063091] ata1: clearing spurious IRQ
1.063175] ata1: clearing spurious IRQ
1.064019] ata_piix 0000:00:1f.2: setting latency timer to 64
1.064079] scsi2 : ata_piix
1.064158] scsi3 : ata_piix
1.064210] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 20
1.064214] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 20
1.064298] Fixed MDIO Bus: probed
1.064307] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
1.065024] alloc irq_desc for 21 on node 0
1.065027] alloc kstat_irqs on node 0
1.065034] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
1.065060] ehci_hcd 0000:00:1d.7: setting latency timer to 64
1.065065] ehci_hcd 0000:00:1d.7: EHCI Host Controller
1.065101] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
1.069012] ehci_hcd 0000:00:1d.7: debug port 1
1.069020] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
1.069036] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
1.078014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
1.078058] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
1.078063] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.078066] usb usb1: Product: EHCI Host Controller
1.078069] usb usb1: Manufacturer: Linux 2.6.31.5-0.1-desktop ehci_hcd
1.078072] usb usb1: SerialNumber: 0000:00:1d.7
1.078177] usb usb1: configuration #1 chosen from 1 choice
1.078221] hub 1-0:1.0: USB hub found
1.078233] hub 1-0:1.0: 8 ports detected
1.078325] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
1.078348] uhci_hcd: USB Universal Host Controller Interface driver
1.079025] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
1.079036] uhci_hcd 0000:00:1d.0: setting latency timer to 64
1.079040] uhci_hcd 0000:00:1d.0: UHCI Host Controller
1.079053] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
1.079081] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
1.079125] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
1.079130] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.079133] usb usb2: Product: UHCI Host Controller
1.079136] usb usb2: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd
1.079139] usb usb2: SerialNumber: 0000:00:1d.0
1.079224] usb usb2: configuration #1 chosen from 1 choice
1.079265] hub 2-0:1.0: USB hub found
1.079275] hub 2-0:1.0: 2 ports detected
1.080024] alloc irq_desc for 22 on node 0
1.080028] alloc kstat_irqs on node 0
1.080035] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
1.080044] uhci_hcd 0000:00:1d.1: setting latency timer to 64
1.080049] uhci_hcd 0000:00:1d.1: UHCI Host Controller
1.080060] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
1.080095] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
1.080139] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
1.080143] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.080146] usb usb3: Product: UHCI Host Controller
1.080149] usb usb3: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd
1.080152] usb usb3: SerialNumber: 0000:00:1d.1
1.080234] usb usb3: configuration #1 chosen from 1 choice
1.080274] hub 3-0:1.0: USB hub found
1.080284] hub 3-0:1.0: 2 ports detected
1.081024] alloc irq_desc for 18 on node 0
1.081027] alloc kstat_irqs on node 0
1.081034] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
1.081042] uhci_hcd 0000:00:1d.2: setting latency timer to 64
1.081047] uhci_hcd 0000:00:1d.2: UHCI Host Controller
1.081058] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
1.081092] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
1.081134] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
1.081138] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.081141] usb usb4: Product: UHCI Host Controller
1.081144] usb usb4: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd
1.081147] usb usb4: SerialNumber: 0000:00:1d.2
1.081237] usb usb4: configuration #1 chosen from 1 choice
1.081277] hub 4-0:1.0: USB hub found
1.081287] hub 4-0:1.0: 2 ports detected
1.082328] ata1.01: ATAPI: TSST CD-RW/DVD-ROM TSH492B, TB04, max UDMA/33
1.082452] ata1: clearing spurious IRQ
1.082533] alloc irq_desc for 23 on node 0
1.082536] alloc kstat_irqs on node 0
1.082543] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
1.082552] uhci_hcd 0000:00:1d.3: setting latency timer to 64
1.082556] uhci_hcd 0000:00:1d.3: UHCI Host Controller
1.082569] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
1.082603] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
1.082647] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
1.082651] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.082655] usb usb5: Product: UHCI Host Controller
1.082657] usb usb5: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd
1.082660] usb usb5: SerialNumber: 0000:00:1d.3
1.082741] usb usb5: configuration #1 chosen from 1 choice
1.082781] hub 5-0:1.0: USB hub found
1.082791] hub 5-0:1.0: 2 ports detected
1.082875] Initializing USB Mass Storage driver...
1.082920] usbcore: registered new interface driver usb-storage
1.082924] USB Mass Storage support registered.
1.082963] usbcore: registered new interface driver libusual1.082980] usbcore: registered new interface driver ums-alauda
1.083016] usbcore: registered new interface driver ums-cypress
1.083037] usbcore: registered new interface driver ums-datafab
1.083056] usbcore: registered new interface driver ums-freecom
1.083073] usbcore: registered new interface driver ums-isd200
1.083090] usbcore: registered new interface driver ums-jumpshot
1.083108] usbcore: registered new interface driver ums-karma
1.083125] usbcore: registered new interface driver ums-onetouch
1.083142] usbcore: registered new interface driver ums-sddr09
1.083160] usbcore: registered new interface driver ums-sddr55
1.083178] usbcore: registered new interface driver ums-usbat
1.083252] PNP: No PS/2 controller found. Probing ports directly.
1.085766] serio: i8042 KBD port at 0x60,0x64 irq 1
1.085774] serio: i8042 AUX port at 0x60,0x64 irq 12
1.085859] mice: PS/2 mouse device common for all mice
1.086060] ata1: clearing spurious IRQ
1.086207] rtc_cmos 00:05: RTC can wake from S4
1.086262] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
1.086291] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
1.086309] cpuidle: using governor ladder
1.086313] cpuidle: using governor menu
1.086706] usbcore: registered new interface driver hiddev
1.086729] usbcore: registered new interface driver usbhid
1.086734] usbhid: v2.6:USB HID core driver
1.166528] TCP cubic registered
1.166599] NET: Registered protocol family 10
1.167195] lo: Disabled Privacy Extensions
1.167639] lib80211: common routines for IEEE802.11 drivers
1.167643] lib80211_crypt: registered algorithm 'NULL'
1.167662] Using IPI No-Shortcut mode
1.167785] PM: Checking image partition /dev/disk/by-id/ata-WDC_WD1600JS-56MHB1_WD-WCANMD177728-part1
1.168045] ata1.01: configured for UDMA/33
1.169215] scsi 0:0:1:0: CD-ROM TSSTcorp CDRW/DVD TSH492B TB04 PQ: 0 ANSI: 5
1.218335] ata3.00: ATA-7: WDC WD1600JS-56MHB1, 10.02E01, max UDMA/133
1.218340] ata3.00: 312581808 sectors, multi 8: LBA48
1.221362] ata3.00: configured for UDMA/133
1.221477] scsi 2:0:0:0: Direct-Access ATA WDC WD1600JS-56M 10.0 PQ: 0 ANSI: 5
1.221680] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
1.221756] sd 2:0:0:0: [sda] Write Protect is off
1.221761] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
1.221801] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
1.221994] sda: sda1 sda2 sda3
1.230743] sd 2:0:0:0: [sda] Attached SCSI disk
1.584019] usb 1-6: new high speed USB device using ehci_hcd and address 5
1.719408] usb 1-6: New USB device found, idVendor=152e, idProduct=2507
1.719413] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
1.719416] usb 1-6: Product: Super Multi DVD Rewriter
1.719419] usb 1-6: Manufacturer: HLDS Inc.
1.719422] usb 1-6: SerialNumber: P02051004102839
1.719513] usb 1-6: configuration #1 chosen from 1 choice
1.719777] scsi4 : SCSI emulation for USB Mass Storage devices
1.719924] usb-storage: device found at 5
1.719927] usb-storage: waiting for device to settle before scanning
2.027017] usb 2-1: new low speed USB device using uhci_hcd and address 2
2.188221] usb 2-1: New USB device found, idVendor=413c, idProduct=2003
2.188225] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
2.188229] usb 2-1: Product: Dell USB Keyboard
2.188231] usb 2-1: Manufacturer: Dell
2.188305] usb 2-1: configuration #1 chosen from 1 choice
2.222512] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input0
2.222603] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1/input0
2.428017] usb 2-2: new low speed USB device using uhci_hcd and address 3
2.590255] usb 2-2: New USB device found, idVendor=046d, idProduct=c016
2.590259] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
2.590263] usb 2-2: Product: Optical USB Mouse
2.590265] usb 2-2: Manufacturer: Logitech
2.590347] usb 2-2: configuration #1 chosen from 1 choice
2.606498] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input1
2.606609] generic-usb 0003:046D:C016.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-2/input0
2.754912] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRRW GSA-2164D 1.00 PQ: 0 ANSI: 02.755409] usb-storage: device scan complete
2.812015] usb 3-1: new full speed USB device using uhci_hcd and address 2
2.986303] usb 3-1: New USB device found, idVendor=03f0, idProduct=0317
2.986308] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
2.986311] usb 3-1: Product: HP LaserJet 1200
2.986314] usb 3-1: Manufacturer: HewLett Packard
2.986317] usb 3-1: SerialNumber: 00CNCF945577
2.986395] usb 3-1: configuration #1 chosen from 1 choice
3.195027] usb 5-2: new full speed USB device using uhci_hcd and address 2
3.343844] usb 5-2: New USB device found, idVendor=0d4e, idProduct=1000
3.343848] usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=2
3.343852] usb 5-2: Product: Wireless USB Card
3.343855] usb 5-2: SerialNumber: 9013010201232
3.343926] usb 5-2: configuration #1 chosen from 1 choice
5.296083] PM: Resume from disk failed.
5.296103] registered taskstats version 1
5.296257] Magic number: 5:520:392
5.296333] rtc_cmos 00:05: setting system clock to 2009-12-10 18:21:53 UTC (1260469313)
5.296459] Freeing unused kernel memory: 464k freed
5.296748] Write protecting the kernel text: 4720k
5.296846] Write protecting the kernel read-only data: 2704k
5.369036] Uniform Multi-Platform E-IDE driver
5.380746] processor LNXCPU:00: registered as cooling_device0
5.391169] udev: starting version 146
6.073779] PM: Marking nosave pages: 0000000000002000 - 0000000000006000
6.073785] PM: Marking nosave pages: 00000000000a0000 - 0000000000100000
6.073790] PM: Basic memory bitmaps created
6.083180] PM: Basic memory bitmaps freed
6.142727] PM: Starting manual resume from disk
6.142733] PM: Resume from partition 8:1
6.142735] PM: Checking hibernation image.
6.142954] PM: Resume from disk failed.
6.640865] EXT4-fs (sda2): barriers enabled
6.644938] kjournald2 starting: pid 221, dev sda2:8, commit interval 5 seconds
6.645118] EXT4-fs (sda2): internal journal on sda2:8
6.645124] EXT4-fs (sda2): delayed allocation enabled
6.645129] EXT4-fs: file extents enabled
6.646200] EXT4-fs: mballoc enabled
6.646222] EXT4-fs (sda2): mounted filesystem with ordered data mode
8.083025] preloadtrace: systemtap: 0.9.9/0.142, base: e03d5000, memory: 34052+77432+11080+13600 data+text+ctx+net, probes: 34
9.658518] udev: starting version 146
9.707200] agpgart-intel 0000:00:00.0: Intel 915G Chipset
9.707489] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
9.710401] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
9.735212] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
9.735284] ACPI: Power Button [PWRF]
9.735362] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
9.735413] ACPI: Power Button [VBTN]
9.962102] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
9.962289] 8139cp 0000:04:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
9.966243] 8139too Fast Ethernet driver 0.9.28
9.972900] intel_rng: Firmware space is locked read-only. If you can’t or
9.972903] intel_rng: don’t want to disable this in firmware setup, and if
9.972905] intel_rng: you are certain that your system has a functional
9.972906] intel_rng: RNG, try using the ‘no_fwh_detect’ option.
9.973227] parport_pc 00:06: reported by Plug and Play ACPI
9.973283] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
10.007052] 8139too 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
10.008226] eth0: RealTek RTL8139 at 0xe02fef00, 00:08:a1:a2:80:cc, IRQ 16
10.039202] iTCO_vendor_support: vendor-support=0
10.040769] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
10.040863] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
10.040886] iTCO_wdt: No card detected
10.046043] scsi 0:0:1:0: Attached scsi generic sg0 type 5
10.046090] sd 2:0:0:0: Attached scsi generic sg1 type 0
10.046136] scsi 4:0:0:0: Attached scsi generic sg2 type 5
10.046856] input: PC Speaker as /devices/platform/pcspkr/input/input4
10.051780] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
10.079177] i801_smbus 0000:00:1f.3: PCI INT B → GSI 17 (level, low) → IRQ 17
10.110509] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
10.110516] Uniform CD-ROM driver Revision: 3.20
10.110649] sr 0:0:1:0: Attached scsi CD-ROM sr0
10.117918] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
10.118088] sr 4:0:0:0: Attached scsi CD-ROM sr1
10.161842] epl: module is from the staging directory, the quality is unknown, you have been warned.
10.164669] EPL: + EplLinInit…
10.164674] EPL: Driver build: Oct 27 2009 / 09:32:47
10.164677] EPL: Installing Driver ‘systec_epl’, Version V1.3 r0…
10.164681] EPL: Driver ‘systec_epl’ installed successful, assigned MajorNumber=250
10.164694] EPL: - EplLinInit (iRet=0)
10.177469] ppdev: user-space parallel port driver
10.189807] usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0317
10.190198] usbcore: registered new interface driver usblp
10.232492] alloc irq_desc for 19 on node 0
10.232497] alloc kstat_irqs on node 0
10.232507] b44 0000:04:03.0: PCI INT A → GSI 19 (level, low) → IRQ 19
10.233108] Intel ICH 0000:00:1e.2: PCI INT A → GSI 23 (level, low) → IRQ 23
10.233156] Intel ICH 0000:00:1e.2: setting latency timer to 64
10.261212] ssb: Sonics Silicon Backplane found on PCI device 0000:04:03.0
10.261278] b44.c:v2.0
10.270077] eth1: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:11:43:22:1e:15
10.655020] intel8x0_measure_ac97_clock: measured 50854 usecs (2451 samples)
10.655027] intel8x0: clocking to 48000
13.066954] Adding 2104472k swap on /dev/sda1. Priority:-1 extents:1 across:2104472k
13.768666] device-mapper: uevent: version 1.0.3
13.769471] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
15.285765] loop: module loaded
19.093785] kjournald starting. Commit interval 15 seconds
19.094100] EXT3 FS on sda3, internal journal
19.094108] EXT3-fs: mounted filesystem with ordered data mode.
19.618087] fuse init (API version 7.12)
21.326409] type=1505 audit(1260469329.529:2): operation=“profile_load” pid=860 name=/bin/ping
21.402357] type=1505 audit(1260469329.605:3): operation=“profile_load” pid=870 name=/sbin/klogd
21.513516] type=1505 audit(1260469329.716:4): operation=“profile_load” pid=876 name=/sbin/syslog-ng
21.657910] type=1505 audit(1260469329.860:5): operation=“profile_load” pid=889 name=/sbin/syslogd
21.789258] type=1505 audit(1260469329.992:6): operation=“profile_load” pid=910 name=/usr/sbin/avahi-daemon
21.897352] type=1505 audit(1260469330.100:7): operation=“profile_load” pid=920 name=/usr/sbin/identd
21.987233] type=1505 audit(1260469330.190:8): operation=“profile_load” pid=930 name=/usr/sbin/mdnsd
22.112705] type=1505 audit(1260469330.315:9): operation=“profile_load” pid=931 name=/usr/sbin/nscd
22.336401] type=1505 audit(1260469330.539:10): operation=“profile_load” pid=946 name=/usr/sbin/ntpd
22.431201] type=1505 audit(1260469330.634:11): operation=“profile_load” pid=998 name=/usr/sbin/traceroute
22.696029] powernow: This module only works with AMD K7 CPUs
23.421248] [drm] Initialized drm 1.1.0 20060810
23.463986] pci 0000:00:02.0: PCI INT A → GSI 16 (level, low) → IRQ 16
23.464219] pci 0000:00:02.0: setting latency timer to 64
23.485765] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
26.082025] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
28.828561] bootsplash: status on console 0 changed to on
80.634623] eth0: link down
80.634745] ADDRCONF(NETDEV_UP): eth0: link is not ready
80.678468] ADDRCONF(NETDEV_UP): eth1: link is not ready
82.791248] ip_tables: (C) 2000-2006 Netfilter Core Team
308.133976] eth0: link down
308.134302] ADDRCONF(NETDEV_UP): eth0: link is not ready
308.233911] NET: Registered protocol family 17
456.671998] UDF-fs: Partition marked readonly; forcing readonly mount
456.872396] UDF-fs INFO UDF: Mounting volume ‘Disc’, timestamp 2009/11/15 17:28 (1000)
555.199947] sr 0:0:1:0: [sr0] Media Changed
555.199962] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
555.199972] sr 0:0:1:0: [sr0] Sense Key : Unit Attention [current]
555.199984] Info fld=0x0
555.199990] sr 0:0:1:0: [sr0] Add. Sense: Not ready to ready change, medium may have changed
555.200014] end_request: I/O error, dev sr0, sector 612080
555.200026] Buffer I/O error on device sr0, logical block 76510
562.295464] sr 0:0:1:0: [sr0] Media Changed
562.295478] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
562.295489] sr 0:0:1:0: [sr0] Sense Key : Unit Attention [current]
562.295500] Info fld=0x0
562.295506] sr 0:0:1:0: [sr0] Add. Sense: Not ready to ready change, medium may have changed
562.295520] end_request: I/O error, dev sr0, sector 612080
562.295531] Buffer I/O error on device sr0, logical block 76510
569.783279] ISO 9660 Extensions: Microsoft Joliet Level 3
569.784216] ISO 9660 Extensions: RRIP_1991A
578.939223] VFS: busy inodes on changed media or resized disk sr0
579.119066] VFS: busy inodes on changed media or resized disk sr0
579.299014] VFS: busy inodes on changed media or resized disk sr0
579.658818] VFS: busy inodes on changed media or resized disk sr0
624.897143] ide-cd driver 5.00
624.911355] ide-gd driver 1.18
624.933700] st: Version 20081215, fixed bufsize 32768, s/g segs 256
1917.578016] usb 1-7: new high speed USB device using ehci_hcd and address 7
1917.692832] usb 1-7: New USB device found, idVendor=0204, idProduct=6025
1917.692844] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
1917.692853] usb 1-7: Product: Flash Disk
1917.692859] usb 1-7: Manufacturer: USB 2.0
1917.692865] usb 1-7: SerialNumber: 2109060048DE7A15
1917.693023] usb 1-7: configuration #1 chosen from 1 choice
1917.694609] scsi5 : SCSI emulation for USB Mass Storage devices
1917.694886] usb-storage: device found at 7
1917.694889] usb-storage: waiting for device to settle before scanning
1918.694583] scsi 5:0:0:0: Direct-Access USB 2.0 Flash Disk 5.00 PQ: 0 ANSI: 2
1918.694831] sd 5:0:0:0: Attached scsi generic sg3 type 0
1918.695273] usb-storage: device scan complete
1918.700970] sd 5:0:0:0: [sdb] 4126208 512-byte logical blocks: (2.11 GB/1.96 GiB)
1918.701554] sd 5:0:0:0: [sdb] Write Protect is off
1918.701564] sd 5:0:0:0: [sdb] Mode Sense: 0b 00 00 08
1918.701568] sd 5:0:0:0: [sdb] Assuming drive cache: write through
1918.703432] sd 5:0:0:0: [sdb] Assuming drive cache: write through
1918.703450] sdb: sdb1
1918.705811] sd 5:0:0:0: [sdb] Assuming drive cache: write through
1918.705825] sd 5:0:0:0: [sdb] Attached SCSI removable disk
2561.763437] usb 1-7: USB disconnect, address 7
2561.765844] FAT: bread failed in fat_clusters_flush
2561.867895] FAT: bread failed in fat_clusters_flush
2561.867971] FAT: bread failed in fat_clusters_flush
2561.867995] FAT: bread failed in fat_clusters_flush
done, hope someone can tell me something out of it.
Hi
In the future, can you upload that information to somewhere like
pastebin please and just post a link 
If you do that and make a post with the link I will fix the posts up.
–
Cheers Malcolm °¿° (Linux Counter #276890)
SUSE Linux Enterprise Desktop 11 (x86_64) Kernel 2.6.27.39-0.3-default
up 5 days 23:37, 4 users, load average: 0.11, 0.14, 0.09
GPU GeForce 8600 GTS Silent - CUDA Driver Version: 190.18
hai,
i dont know how to do that…
but can you tell me something out of my (complicated)posts??
Have a read here…