Hallo,
ich habe mir ein opensuse 13.2 32 Bit mit XFCE auf einen alten Fujitsu Siemens Amilo M6450G Laptop installiert.
Der Laptop hat einen eingebauten SD Card Reader, doch der scheint nicht zu funktionieren. Ich stecke die SD Karte hinein und nichts passiert.
DIe SD Karte ist ok, unter Windows wird sie ohne Probleme erkannt. Es ist eine 8 GB SDHC Karte.
hier die Ausgabe von lsusb:
~> lsusb
Bus 001 Device 067: ID 05e3:0711 Genesys Logic, Inc. Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
hier die von lsscsi:
~> lsscsi
[0:0:0:0] disk ATA FUJITSU MHV2080B 0025 /dev/sda
[1:0:0:0] cd/dvd HL-DT-ST DVD-RW GWA-4082N CW02 /dev/sr0
[99:0:0:0] disk Generic STORAGE DEVICE 9144 -
es wird scheinbar kein “device” vergeben, evtl. fehlt ein Treiber?
hier die von lspci:
~> sudo lspci
root's password:
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
00:1d.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.3 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
00:1d.7 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
01:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
01:0a.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx]
01:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter (rev 10)
Wäre super wenn jemand eine Idee hat was ich machen kann, dass sie SD Cards gelesen werden. Ich bin ein Linux Anfänger, das ist das erst Mal, dass ich Linux installiert habe.
Gruß & Danke