Internal Modem of my Y510 ideapad not working

this is the output of ModemData.txt after running the scanmodem tool

Only plain text email is forwarded by the Discuss@Linmodems.org List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry
Welcome to openSUSE 11.0 (i586) - Kernel kernel 2.6.25.5-1.1-pae
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: Linux Online - User Groups.
They will know your Country’s modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Welcome to openSUSE 11.0 (i586) - Kernel
Linux version 2.6.25.5-1.1-pae (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-06-07 01:55:22 +0200
scanModem update of: 2008_07_31

There are no blacklisted modem drivers in /etc/modprobe* files
Attached USB devices are:
ID 1d6b:0001 Linux Foundation 1.1 root hub
ID 0a5c:2101 Broadcom Corp. A-Link BlueUsbA2 Bluetooth
ID 1d6b:0001 Linux Foundation 1.1 root hub
ID 15ca:00c3 Textech International Ltd. Mini Optical Mouse
ID 1d6b:0001 Linux Foundation 1.1 root hub
ID 1d6b:0001 Linux Foundation 1.1 root hub
ID 062a:0201 Creative Labs Defender Office Keyboard (K7310) S Zodiak KM-9010
ID 1d6b:0001 Linux Foundation 1.1 root hub
ID 1d6b:0002 Linux Foundation 2.0 root hub
ID 5986:0200 Acer, Inc
ID 1164:1f08 YUAN High-Tech Development Co., Ltd
ID 1d6b:0002 Linux Foundation 2.0 root hub

USB modems not recognized

For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name


00:1b.0 8086:284b 17aa:3d96 Audio device: Intel Corporation 82801H

Modem interrupt assignment and sharing:
22: 1262 1169 IO-APIC-fasteoi HDA Intel
— Bootup diagnostics for card in PCI slot 00:1b.0 ----
ACPI: PCI Interrupt 0000:00:1b.0[A] → GSI 22 (level, low) → IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64

===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The ALSA verion is 1.0.16
The modem cards detected by “aplay -l” are:
card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]

The /proc/asound/pcm file reports:

00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
00-02: ALC883 Analog : ALC883 Analog : capture 1
00-01: ALC883 Digital : ALC883 Digital : playback 1
00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1

about /proc/asound/cards:

0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfebf8000 irq 22

PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.25.11-0.1-pae/kernel/sound/pci/hda/snd-hda-intel.ko
The modem codec file for the HDA card is: /proc/asound/card0/codec#1

Codec: Motorola Si3054
Address: 1
Vendor Id: 0x10573055
Subsystem Id: 0x17aa3d7d
Revision Id: 0x100700
Modem Function Group: 0x1

The audio card hosts a softmodem chip: 0x10573055

The softmodem chip 0x10573055 is in principle supported by the COMM support of slmodemd
and the joint snd-hda-intel audio+modem driver, begun with ALSA version 1.0.13.
For HDA cards with ALC883 chips, an upgrade to ALSA verions 1.0.15 way be necessary. Instructions for Upgrading snd-hda-intel and its dependent driver set are at:
Re: John CANADA Kernel 2.6.22-14-generic

If not a Conexant modem, the driver snd-hda-intel with its dependent drivers:
snd_hda_intel 386460 1
snd_pcm 100100 2 snd_pcm_oss,snd_hda_intel
snd_page_alloc 27400 2 snd_hda_intel,snd_pcm
snd_hwdep 26372 1 snd_hda_intel
snd 79544 10 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep

provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips.

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive diagnostics for card in bus 00:1b.0:
Modem chipset detected on
NAME="Audio device: Intel Corporation 82801H "
CLASS=0403
PCIDEV=8086:284b
SUBSYS=17aa:3d96
IRQ=22
HDA=8086:284b
SOFT=8086:284b.HDA
CHIP=0x10573055
IDENT=slmodemd
SLMODEMD_DEVICE=hw:0,6
Driver=snd-hda-intel

For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801H
Primary device ID: 8086:284b
Subsystem PCI_id 17aa:3d96
Softmodem codec or chipset from diagnostics: 0x10573055
from Archives:
The HDA card softmodem chip is 0x10573055

Support type needed or chipset: slmodemd supporting the snd-hda-intel audio+modem driver

An ALSA (Advanced Linux Sound Architecture) modem driver: snd-hda-intel
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd

Download from Index of /packages/smartlink
the package SLMODEMD.gcc4.3.tar.gz having a compiled slmodemd. Unpack under Linux with:
$ tar zxf SLMODEMD.gcc4.3.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
slmodemd -c YOUR_COUNTRY --alsa hw:0,6
reporting dynamic creation of ports:
/dev/ttySL0 → /dev/pts/N , with N some number
Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.

----------------end Softmodem section --------------

Writing DOCs/Intel.txt
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================

Completed candidate modem analyses.

The base of the UDEV device file system is: /dev/.udev

Versions adequately match for the compiler installed: 4.3.1
and the compiler used in kernel assembly: 4.3

linux-headers-2.6.25.5-1.1-pae resources needed for compiling are not manifestly ready!

If compiling is necessary packages must be installed, providing:
make kernel-source-2.6.25.5-1.1-pae

If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb

Checking pppd properties:
-rwxr-xr-x 1 root dialout 304644 2008-06-07 02:51 /usr/sbin/pppd

In case of an “error 17” “serial loopback” problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd

Checking settings of: /etc/ppp/options
noipdefault
noauth
crtscts
lock
modem
asyncmap 0
nodetach
lcp-echo-interval 30
lcp-echo-failure 4
lcp-max-configure 60
lcp-restart 2
idle 600
noipx
file /etc/ppp/filters

In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see → Warning: Could not modify /etc/ppp/pap-secrets: Permission denied](http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html)

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 pan0 wlan0 wmaster0
Which can interfere with Browser naviagation.

Don’t worry about the following, it is for experts should trouble shooting be necessary.

Checking for modem support lines:

 /device/modem symbolic link:   

slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/50-udev-default.rules:KERNEL==“mwave”, NAME=“modems/mwave”, GROUP=“uucp”
/etc/udev/rules.d/77-network.rules:SUBSYSTEM==“net”, ENV{INTERFACE}==“ppp*|ippp*|isdn*|plip*|lo*|irda*|dummy*|ipsec*|tun*|tap*|bond*|vlan*|modem*|dsl*”, GOTO=“skip_ifup”
Within /etc/modprobe.conf files:
/etc/modprobe.conf:# Linux ACP modem (Mwave)
Within any ancient /etc/devfs files:

 Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

How to get this working ?

plzz help…waiting for some ideas

The audio card hosts a softmodem chip: 0x10573055

The softmodem chip 0x10573055 is in principle supported by the COMM support of slmodemd

For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801H
Primary device ID: 8086:284b
Subsystem PCI_id 17aa:3d96
Softmodem codec or chipset from diagnostics: 0x10573055
from Archives:
The HDA card softmodem chip is 0x10573055

Support type needed or chipset: slmodemd supporting the snd-hda-intel audio+modem driver

This output suggests that the smartlink-softmodem package may be ok. Install via yast software manager, and it should take care of any dependent packages for you.

its already installed. so now how to configure and use ?

Fist you need to configure with YaST > Network Deivces > Modem. The easiest way to control the modem interface is via KInternet. Install this package if you don’t already have it.

/etc/init.d/slmodemd start
Starting SmartLink Modem driver: startproc: exit status of parent of /usr/sbin/slmodemd: 255
failed

what’s the meaning of this ?