Intel NUC6i3SYH problems with wireless Thumbleweed

English Network/Internet
1

Hello. Cannot get my wireless to work.

Updated my firmware

dmesg | grep firmware
    4.624951] iwlwifi 0000:01:00.0: loaded firmware version 20.296667.0 op_mode iwlmvm

Tested these things as well:

sudo /usr/sbin/iwlist scan
root's password:
wlp1s0    Interface doesn't support scanning : Device or resource busy

eno1      Interface doesn't support scanning.

lo        Interface doesn't support scanning.

/usr/sbin/iwconfig 
wlp1s0    IEEE 802.11abgn  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=0 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Power Management:on
          
eno1      no wireless extensions.

lo        no wireless extensions.

/usr/sbin/iwconfig 
wlp1s0    IEEE 802.11abgn  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=0 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Power Management:on
          
eno1      no wireless extensions.

lo        no wireless extensions.

Any suggestions? (Works out of the box with PClinuxOS)

2

Still having troubles…
The wireless card is an Intel 8260 rev 0x208

The card Works in pclinuxos wich uses kernel 4.4.4 tested also with kernel 4.4.6 and that also Works. In pclinuxos the firmware version 16 is used and works tried to update the firmware and the latest firmware loaded in pclinuxos kernel 4.4.6 is 19 and that also works.

Doesn’t anyone have any suggestions?

3

Solved… Disable wicked and use network manager…

4

I have looked into this and wicked isn’t even running do you have any other ideas on how to fix this issue.

5

Have you tried using yast to select use Network manager instead of wicked? That did the trick för Me…
Following link describes how to do this SUSE Documentation