Installing "Terratec Cinergy S2 PCI HD" on openSUSE 11.3

English Multimedia
#1

Hello,

I’ve a ‘Terratec Cinergy S2 PCI HD’ DVB-S2 Card, which don’t work with openSUSE 11.3. (‘Terratec Cinergy S2 PCI HD’ same as Hardware as ‘HDTV-Karte SkyStar HD 2’, ‘Twinhan 1041’, ‘AzureWave DVB-S2’, ‘AD-SP400’, ‘DigitalRise DVB-S2’, …).

  1. The VDR-WIKI shows me, that the card should normally work with Mantis DVB Driver. But the openSUSE 11.3 Kernel includes it.

  2. The ‘yast2 tv’ don’t find a driver and also no mantis driver is shown (same as ‘HDTV-Karte SkyStar HD 2’, ‘Twinhan 1041’, ‘AzureWave DVB-S2’, ‘AD-SP400’,
    ‘DigitalRise DVB-S2’, …).

  3. I follow the description on the linuxtv.org page. So I add in the ‘/etc/init.d/boot.local’ the following line:

(sleep 2m && modprobe stb0899 && modprobe stb6100 && modprobe lnbp21 && modprobe mantis && modprobe mantis_core )&
  1. lspci shows the following output:
#lspci
...
03:03.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] (rev 01)
...

lspci -vvn -s 3:3
03:03.0 0480: 1822:4e35 (rev 01)
        Subsystem: 153b:1179
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (2000ns min, 63750ns max)
        Interrupt: pin A routed to IRQ 21
        Region 0: Memory at fdfff000 (32-bit, prefetchable) [size=4]
        Kernel driver in use: Mantis
  1. dmesg delivers
...
[452583.691192] Mantis 0000:03:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[452583.695964] DVB: registering new adapter (Mantis DVB adapter)
[452583.698514] IR RC5(x) protocol handler initialized
[452583.728509] IR RC6 protocol handler initialized
[452583.853648] IR JVC protocol handler initialized
[452583.939013] IR Sony protocol handler initialized
[452584.587712] stb0899_attach: Attaching STB0899 
[452584.587720] stb6100_attach: Attaching STB6100 
[452584.587944] LNBx2x attached on addr=8
[452584.587952] DVB: registering adapter 2 frontend 0 (STB0899 Multistandard)...
[458837.453045] Mantis 0000:03:03.0: PCI INT A disabled
[458882.326272] Mantis 0000:03:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[458882.329887] DVB: registering new adapter (Mantis DVB adapter)
[458883.219734] stb0899_attach: Attaching STB0899 
[458883.219743] stb6100_attach: Attaching STB6100 
[458883.219964] LNBx2x attached on addr=8
[458883.219973] DVB: registering adapter 2 frontend 0 (STB0899 Multistandard)
...

For me it looks like good - but so I see it right, vdr doesn’t work with them.

What is my problem? What should I do?[/size]

#2

The Mantis driver is in the kernel now, so I wonder what happens if you simply launch Kaffeine…?

My Cynergy Cable PCI card worked out of the box with 11.3 (except for the decryption, unfortunately).

Uwe

#3

Kaffeine is not installed on my Server. This card should only work with mythtv or vdr. The two other cards (KNC ONE TV-Station DVB-S2 Plus, PCI and Technisat SkyStar 2 TV, PCI) are detected on “yast2 tv” without anny problems. But the mantis driver must be loaded manually.

What shows your “yast2 tv” ???

Thanks
Ulf