cer@Telcontar:~/Download> l -h openSUSE-DVD-Build1034-x86_64.iso
-rw-r–r-- 1 cer users 4,5G 2011-02-09 13:17 openSUSE-DVD-Build1034-x86_64.iso
cer@Telcontar:~/Download> l openSUSE-DVD-Build1034-x86_64.iso
-rw-r–r-- 1 cer users 4750970880 2011-02-09 13:17
openSUSE-DVD-Build1034-x86_64.iso
Wodim refuses. k3b crashes. Brasero refuses. What to do, double layer? :-/
Brasero says: “the data size is too large for the disc even with the
overburn option”.
wodim says:
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 1 = CD-ROM
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK
limits.scsidev: ‘/dev/dvd’
devname: ‘/dev/dvd’
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : ‘HL-DT-ST’
Identification : 'DVDRAM GH22LS50 ’
Revision : ‘TL01’
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x001A (DVD+RW)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW) (current)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1048576 = 1024 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 16007 kB/s 90x CD 11x DVD
FIFO size : 4194304 = 4096 KB
Track 01: data 4530 MB
Total size: 5203 MB (515:30.80) = 2319810 sectors
Lout start: 5203 MB (515:32/60) = 2319810 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
wodim: ERROR: Could not manage to find medium size, and more than 4.3 GB of
data for a non dual layer disc.
wodim: Cannot write more than remaining DVD capacity.
Telcontar:~ # dvd+rw-mediainfo /dev/dvd
INQUIRY: [HL-DT-ST][DVDRAM GH22LS50 ][TL01]
GET [CURRENT] CONFIGURATION:
Mounted Media: 1Ah, DVD+RW
Current Write Speed: 4.0x1385=5540KB/s
Write Speed #0: 4.0x1385=5540KB/s
Write Speed #1: 2.4x1385=3324KB/s
GET [CURRENT] PERFORMANCE:
Write Performance: 4.0x1385=5540KB/s@[0 -> 2295103]
Speed Descriptor#0: 02/2295103 R@5.4x1385=7449KB/s W@4.0x1385=5540KB/s
Speed Descriptor#1: 02/2295103 R@5.4x1385=7449KB/s W@2.4x1385=3324KB/s
READ DVD STRUCTURE#0h]:
Media Book Type: 00h, DVD-ROM book [revision 0]
Media ID: MBIPG101/W04
Legacy lead-out at: 22951042KB=4700372992
READ DISC INFORMATION:
Disc status: complete
Number of Sessions: 1
State of Last Session: complete
Number of Tracks: 1
BG Format Status: suspended
READ FORMAT CAPACITIES:
formatted: 22951042048=4700372992
26h(0): 22951042048=4700372992
READ TRACK INFORMATION#1]:
Track State: complete
Track Start Address: 02KB
Free Blocks: 02KB
Track Size: 22951042KB
FABRICATED TOC:
Track#1 : 14@0
Track#AA : 14@2295104
Multi-session Info: #1@0
READ CAPACITY: 2295104*2048=4700372992
Media is RW. Wodim refuses to blank it, k3b, when forced, formats it. It is
empty.
Size is 4700372992
ISO is 4750970880
→ TOO BIG!
–
Cheers / Saludos,
Carlos E. R.
(from 11.2 x86_64 “Emerald” at Telcontar)