I can not login in the openSUSE 13.1

[rhus]

Hello!!

I can not login in the openSUSE 13.1 KDE - 64bit.
After login, the system returns to the login screen again.

How can I solve this problem?

Thank you very much!!

[robin_listas]

On 2014-12-29 13:46, rhus wrote:
>
> Hello!!
>
> I can not login in the openSUSE 13.1 KDE - 64bit.
> After login, the system returns to the login screen again.

Did it ever work, or is this a new install?

If it is not new, what did you do? Updates, changes?

–
Cheers / Saludos,

Carlos E. R.
(from 13.1 x86_64 “Bottle” at Telcontar)

[rhus]

@robin_listas

On 2014-12-29 13:46, rhus wrote:
>
> Hello!!
>
> I can not login in the openSUSE 13.1 KDE - 64bit.
> After login, the system returns to the login screen again.

Did it ever work, or is this a new install?

If it is not new, what did you do? Updates, changes?

It is not new and I updated the sistem.

[mkossmann]

Can you login on a textconsole ( switch with CTRL-ALT-F1) ?
If that works, have look on the xorg logfiles.

[gogalthorp]

Not being able to get to the Desktop may indicate a full drive. Are you running BTRFS file system?

[wolfi323]

@mkossmann

If that works, have look on the xorg logfiles.

Xorg seems to start fine, otherwise there would not be a login screen…
So there probably won’t be anything in the xorg logfiles.

So better look into /var/log/kdm.log and ~/.xsession-errors-:0.

I would suggest to try recovery mode (advanced options in the boot menu).
KDE crashing on startup might indeed be caused by a graphics driver problem.
If recovery mode works, please check whether your graphics driver is working on a normal boot, the xorg log should show that.
In that case it would be interesting which graphics card you use, and whether you installed a proprietary driver.

Other suggestions:
Try to login as a newly created user.

Check that your hard disk is not full.

Try to login to a different session like IceWM. Does that work?

[robin_listas]

On 2014-12-29 14:46, rhus wrote:
>
> robin_listas;2685748 Wrote:

>> If it is not new, what did you do? Updates, changes?
>
> It is not new and I updated the sistem.

Please, talk more…

What did you update, for instance?

I’m not there, at your seat. You have to explain things.

–
Cheers / Saludos,

Carlos E. R.
(from 13.1 x86_64 “Bottle” at Telcontar)

[rhus]

@robin_listas

On 2014-12-29 14:46, rhus wrote:
>
> robin_listas;2685748 Wrote:

>> If it is not new, what did you do? Updates, changes?
>
> It is not new and I updated the sistem.

Please, talk more…

What did you update, for instance?

I’m not there, at your seat. You have to explain things.

Automatically was intalled XBMC and another thing, I do not remember.

[robin_listas]

On 2014-12-29 15:16, rhus wrote:

> Automatically was intalled XBMC and another thing, I do not remember.

There was a recent kernel update. Did you do it?
What video hardware do you have? Proprietary drivers, perhaps?

Can you login in text mode (ctrl-alt-f1)? Then can you run “df -h”? Then
do you see any partition at 100% use, or near? If so, which?

If not, are you using btrfs? In that case, view this thread:
http://forums.opensuse.org/showthread.php?t=503867

–
Cheers / Saludos,

Carlos E. R.
(from 13.1 x86_64 “Bottle” at Telcontar)

[rhus]

@wolfi323

Xorg seems to start fine, otherwise there would not be a login screen…
So there probably won’t be anything in the xorg logfiles.

So better look into /var/log/kdm.log and ~/.xsession-errors-:0.

I would suggest to try recovery mode (advanced options in the boot menu).
KDE crashing on startup might indeed be caused by a graphics driver problem.
If recovery mode works, please check whether your graphics driver is working on a normal boot, the xorg log should show that.
In that case it would be interesting which graphics card you use, and whether you installed a proprietary driver.

Other suggestions:
Try to login as a newly created user.

Check that your hard disk is not full.

Try to login to a different session like IceWM. Does that work?

Part of may “kdm.log”:

---

The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type “ONE_LEVEL” has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
klauncher(2101) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(2095)/kdecore (KTimeZone): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: “Not connected to D-Bus server”

kdmgreet(2095)/kdecore (KTimeZone): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
kdmgreet(2095) KdmPixmap::loadPixmap: failed to load “/usr/share/kde4/apps/kdm/themes/openSUSE/background-1920x1080.jpg”
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server

I’m logged in IceWM, It works fine!!
Now I try to login as a newly created user.

[wolfi323]

@rhus

Part of may “kdm.log”:

Nothing that would cause a crash.

I’m logged in IceWM, It works fine!!

Ok. Then please try to run kde inside of IceWM in an xterm.

startkde

Does KDE start? If not, please post the last lines from the xterm.

[rhus]

@wolfi323

Nothing that would cause a crash.

Ok. Then please try to run kde inside of IceWM in an xterm.

startkde

Does KDE start? If not, please post the last lines from the xterm.

KDE crashes again. I could not read the errors … is very fast.
The system returned to the login screen.

I read something about “hplip” and it was written in red.

[wolfi323]

@rhus

KDE crashes again. I could not read the errors … is very fast.
The system returned to the login screen.

You were returned to the login screen when you ran “startkde” inside IceWM?

Then that’s definitely a graphics driver issue. Did you try recovery mode yet?
Please post /var/log/Xorg.0.log.

Btw, you should find the same messages in ~/.xsession-errors-:0 as I already mentioned. But that file is recreated on login, so rename it first before you login to a different session after KDE crashes.

I read something about “hplip” and it was written in red.

Probably irrelevant. hplip should not be able to crash the whole X session.

[rhus]

@wolfi323

You were returned to the login screen when you ran “startkde” inside IceWM?

Yes!!

Did you try recovery mode yet?

I can not do that.

Please post /var/log/Xorg.0.log.

My “Xorg.0.log” file.

4861.345]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the “xorg” product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
4861.345]
X.Org X Server 1.14.3.901 (1.14.4 RC 1)
Release Date: 2013-10-26
4861.345] X Protocol Version 11, Revision 0
4861.345] Build Operating System: openSUSE SUSE LINUX
4861.345] Current Operating System: Linux linux-plzk 3.11.10-25-desktop #1 SMP PREEMPT Wed Dec 17 17:57:03 UTC 2014 (8210f77) x86_64
4861.345] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.10-25-desktop root=UUID=a40ef651-fc4f-43ee-ab01-f679ef4966ad quiet quiet resume=/dev/disk/by-id/ata-ST3500418AS_5VMMRA93-part5 splash=silent quiet showopts
4861.345] Build Date: 18 December 2014 02:04:44PM
4861.345]
4861.345] Current version of pixman: 0.30.2
4861.345] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
4861.345] Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
4861.346] (==) Log file: “/var/log/Xorg.0.log”, Time: Mon Dec 29 13:31:38 2014
4861.346] (==) Using config directory: “/etc/X11/xorg.conf.d”
4861.346] (==) Using system config directory “/usr/share/X11/xorg.conf.d”
4861.346] (==) No Layout section. Using the first Screen section.
4861.346] (==) No screen section available. Using defaults.
4861.346] () |–>Screen “Default Screen Section” (0)
4861.346] (**) | |–>Monitor “<default monitor>”
4861.346] (==) No monitor specified for screen “Default Screen Section”.
Using a default monitor configuration.
4861.346] (==) Automatically adding devices
4861.346] (==) Automatically enabling devices
4861.346] (==) Automatically adding GPU devices
4861.346] (WW) The directory “/usr/share/fonts/misc/sgi” does not exist.
4861.346] Entry deleted from font path.
4861.346] (==) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/ghostscript/,
/usr/share/fonts/cyrillic:unscaled,
/usr/share/fonts/truetype/,
built-ins
4861.346] (==) ModulePath set to “/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules”
4861.346] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
4861.346] (II) Loader magic: 0x804c20
4861.346] (II) Module ABI versions:
4861.346] X.Org ANSI C Emulation: 0.4
4861.346] X.Org Video Driver: 14.1
4861.346] X.Org XInput driver : 19.1
4861.346] X.Org Server Extension : 7.0
4861.347] (II) xfree86: Adding drm device (/dev/dri/card0)
4861.348] (–) PCI:*(0:1:0:0) 10de:0622:1acc:961d rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x???/524288
4861.348] Initializing built-in extension Generic Event Extension
4861.348] Initializing built-in extension SHAPE
4861.348] Initializing built-in extension MIT-SHM
4861.348] Initializing built-in extension XInputExtension
4861.348] Initializing built-in extension XTEST
4861.348] Initializing built-in extension BIG-REQUESTS
4861.348] Initializing built-in extension SYNC
4861.348] Initializing built-in extension XKEYBOARD
4861.348] Initializing built-in extension XC-MISC
4861.348] Initializing built-in extension SECURITY
4861.348] Initializing built-in extension XINERAMA
4861.348] Initializing built-in extension XFIXES
4861.348] Initializing built-in extension RENDER
4861.348] Initializing built-in extension RANDR
4861.348] Initializing built-in extension COMPOSITE
4861.348] Initializing built-in extension DAMAGE
4861.348] Initializing built-in extension MIT-SCREEN-SAVER
4861.348] Initializing built-in extension DOUBLE-BUFFER
4861.348] Initializing built-in extension RECORD
4861.348] Initializing built-in extension DPMS
4861.348] Initializing built-in extension X-Resource
4861.348] Initializing built-in extension XVideo
4861.348] Initializing built-in extension XVideo-MotionCompensation
4861.348] Initializing built-in extension XFree86-VidModeExtension
4861.348] Initializing built-in extension XFree86-DGA
4861.348] Initializing built-in extension XFree86-DRI
4861.348] Initializing built-in extension DRI2
4861.348] (II) “glx” will be loaded by default.
4861.348] (II) LoadModule: “dri2”
4861.349] (II) Module “dri2” already built-in
4861.349] (II) LoadModule: “glamoregl”
4861.349] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
4861.377] (EE) Failed to load /usr/lib64/xorg/modules/libglamoregl.so: /usr/lib64/xorg/modules/libglamoregl.so: undefined symbol: _glapi_tls_Context
4861.378] (II) UnloadModule: “glamoregl”
4861.378] (II) Unloading glamoregl
4861.378] (EE) Failed to load module “glamoregl” (loader failed, 7)
4861.378] (II) LoadModule: “glx”
4861.378] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
4861.378] (II) Module glx: vendor=“X.Org Foundation”
4861.378] compiled for 1.14.3.901, module version = 1.0.0
4861.378] ABI class: X.Org Server Extension, version 7.0
4861.378] (==) AIGLX enabled
4861.378] Loading extension GLX
4861.378] (==) Matched nvidia as autoconfigured driver 0
4861.378] (==) Matched nouveau as autoconfigured driver 1
4861.378] (==) Matched nv as autoconfigured driver 2
4861.378] (==) Matched nvidia as autoconfigured driver 3
4861.378] (==) Matched nouveau as autoconfigured driver 4
4861.378] (==) Matched nv as autoconfigured driver 5
4861.378] (==) Matched modesetting as autoconfigured driver 6
4861.378] (==) Matched fbdev as autoconfigured driver 7
4861.378] (==) Matched vesa as autoconfigured driver 8
4861.378] (==) Assigned the driver to the xf86ConfigLayout
4861.378] (II) LoadModule: “nvidia”
4861.378] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
4861.380] (II) Module nvidia: vendor=“NVIDIA Corporation”
4861.380] compiled for 4.0.2, module version = 1.0.0
4861.380] Module class: X.Org Video Driver
4861.380] (II) LoadModule: “nouveau”
4861.380] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
4861.380] (II) Module nouveau: vendor=“X.Org Foundation”
4861.380] compiled for 1.14.3, module version = 1.0.9
4861.380] Module class: X.Org Video Driver
4861.380] ABI class: X.Org Video Driver, version 14.1
4861.380] (II) LoadModule: “nv”
4861.381] (II) Loading /usr/lib64/xorg/modules/drivers/nv_drv.so
4861.381] (II) Module nv: vendor=“X.Org Foundation”
4861.381] compiled for 1.14.3, module version = 2.1.20
4861.381] Module class: X.Org Video Driver
4861.381] ABI class: X.Org Video Driver, version 14.1
4861.381] (II) LoadModule: “modesetting”
4861.381] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
4861.381] (II) Module modesetting: vendor=“X.Org Foundation”
4861.381] compiled for 1.14.3.901, module version = 0.8.0
4861.381] Module class: X.Org Video Driver
4861.381] ABI class: X.Org Video Driver, version 14.1
4861.381] (II) LoadModule: “fbdev”
4861.382] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
4861.382] (II) Module fbdev: vendor=“X.Org Foundation”
4861.382] compiled for 1.14.3, module version = 0.4.3
4861.382] Module class: X.Org Video Driver
4861.382] ABI class: X.Org Video Driver, version 14.1
4861.382] (II) LoadModule: “vesa”
4861.382] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
4861.382] (II) Module vesa: vendor=“X.Org Foundation”
4861.382] compiled for 1.14.3, module version = 2.3.3
4861.382] Module class: X.Org Video Driver
4861.382] ABI class: X.Org Video Driver, version 14.1
4861.382] (II) NVIDIA dlloader X Driver 340.65 Tue Dec 2 08:47:36 PST 2014
4861.382] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
4861.382] (II) NOUVEAU driver
4861.382] (II) NOUVEAU driver for NVIDIA chipset families :
4861.382] RIVA TNT (NV04)
4861.382] RIVA TNT2 (NV05)
4861.382] GeForce 256 (NV10)
4861.382] GeForce 2 (NV11, NV15)
4861.382] GeForce 4MX (NV17, NV18)
4861.382] GeForce 3 (NV20)
4861.382] GeForce 4Ti (NV25, NV28)
4861.382] GeForce FX (NV3x)
4861.382] GeForce 6 (NV4x)
4861.382] GeForce 7 (G7x)
4861.382] GeForce 8 (G8x)
4861.382] GeForce GTX 200 (NVA0)
4861.382] GeForce GTX 400 (NVC0)
4861.382] (II) NOUVEAU driver
4861.382] (II) NOUVEAU driver for NVIDIA chipset families :
4861.382] RIVA TNT (NV04)
4861.382] RIVA TNT2 (NV05)
4861.382] GeForce 256 (NV10)
4861.382] GeForce 2 (NV11, NV15)
4861.382] GeForce 4MX (NV17, NV18)
4861.382] GeForce 3 (NV20)
4861.382] GeForce 4Ti (NV25, NV28)
4861.382] GeForce FX (NV3x)
4861.382] GeForce 6 (NV4x)
4861.383] GeForce 7 (G7x)
4861.383] GeForce 8 (G8x)
4861.383] GeForce GTX 200 (NVA0)
4861.383] GeForce GTX 400 (NVC0)
4861.383] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
4861.383] (II) FBDEV: driver for framebuffer: fbdev
4861.383] (II) VESA: driver for VESA chipsets: vesa
4861.383] (++) using VT number 7

4861.383] (II) Loading sub module “fb”
4861.383] (II) LoadModule: “fb”
4861.383] (II) Loading /usr/lib64/xorg/modules/libfb.so
4861.383] (II) Module fb: vendor=“X.Org Foundation”
4861.383] compiled for 1.14.3.901, module version = 1.0.0
4861.383] ABI class: X.Org ANSI C Emulation, version 0.4
4861.383] (WW) Unresolved symbol: fbGetGCPrivateKey
4861.383] (II) Loading sub module “wfb”
4861.383] (II) LoadModule: “wfb”
4861.383] (II) Loading /usr/lib64/xorg/modules/libwfb.so
4861.384] (II) Module wfb: vendor=“X.Org Foundation”
4861.384] compiled for 1.14.3.901, module version = 1.0.0
4861.384] ABI class: X.Org ANSI C Emulation, version 0.4
4861.384] (II) Loading sub module “ramdac”
4861.384] (II) LoadModule: “ramdac”
4861.384] (II) Module “ramdac” already built-in

[rhus]

My Xorg.0.log file part 2.

4861.384] (WW) Falling back to old probe method for modesetting
4861.384] (WW) Falling back to old probe method for fbdev
4861.384] (II) Loading sub module “fbdevhw”
4861.384] (II) LoadModule: “fbdevhw”
4861.384] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
4861.384] (II) Module fbdevhw: vendor=“X.Org Foundation”
4861.384] compiled for 1.14.3.901, module version = 0.0.2
4861.385] ABI class: X.Org Video Driver, version 14.1
4861.385] (WW) Falling back to old probe method for vesa
4861.385] (II) NVIDIA(0): Creating default Display subsection in Screen section
“Default Screen Section” for depth/fbbpp 24/32
4861.385] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
4861.385] (==) NVIDIA(0): RGB weight 888
4861.385] (==) NVIDIA(0): Default visual is TrueColor
4861.385] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
4861.385] () NVIDIA(0): Enabling 2D acceleration
4861.385] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
4861.385] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
4861.385] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
4861.385] (EE) NVIDIA(0): you continue to encounter problems, Please try
4861.385] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
4862.153] (II) NVIDIA(0): Display (LG Electronics W2043 (CRT-1)) does not support NVIDIA
4862.153] (II) NVIDIA(0): 3D Vision stereo.
4862.154] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
4862.155] (II) NVIDIA(0): NVIDIA GPU GeForce 9600 GT (G94) at PCI:1:0:0 (GPU-0)
4862.155] (–) NVIDIA(0): Memory: 1048576 kBytes
4862.155] (–) NVIDIA(0): VideoBIOS: 62.94.56.00.36
4862.155] (II) NVIDIA(0): Detected PCI Express Link width: 16X
4862.158] (–) NVIDIA(0): Valid display device(s) on GeForce 9600 GT at PCI:1:0:0
4862.158] (–) NVIDIA(0): CRT-0
4862.158] (–) NVIDIA(0): LG Electronics W2043 (CRT-1) (boot, connected)
4862.158] (–) NVIDIA(0): DFP-0
4862.158] (–) NVIDIA(0): DFP-1
4862.158] (–) NVIDIA(0): DFP-2
4862.158] (–) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
4862.158] (–) NVIDIA(GPU-0): LG Electronics W2043 (CRT-1): 400.0 MHz maximum pixel clock
4862.158] (–) NVIDIA(0): DFP-0: Internal TMDS
4862.158] (–) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
4862.158] (–) NVIDIA(0): DFP-1: Internal TMDS
4862.158] (–) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
4862.158] (–) NVIDIA(0): DFP-2: Internal TMDS
4862.158] (–) NVIDIA(GPU-0): DFP-2: 330.0 MHz maximum pixel clock
4862.158] () NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
4862.158] () NVIDIA(0): device LG Electronics W2043 (CRT-1) (Using EDID
4862.158] () NVIDIA(0): frequencies has been enabled on all display devices.)
4862.159] (==) NVIDIA(0):
4862.159] (==) NVIDIA(0): No modes were requested; the default mode “nvidia-auto-select”
4862.159] (==) NVIDIA(0): will be used as the requested mode.
4862.159] (==) NVIDIA(0):
4862.159] (II) NVIDIA(0): Validated MetaModes:
4862.159] (II) NVIDIA(0): “CRT-1:nvidia-auto-select”
4862.159] (II) NVIDIA(0): Virtual screen size determined to be 1600 x 900
4862.192] (–) NVIDIA(0): DPI set to (90, 91); computed from “UseEdidDpi” X config
4862.192] (–) NVIDIA(0): option
4862.192] (II) UnloadModule: “nouveau”
4862.192] (II) Unloading nouveau
4862.192] (II) UnloadModule: “nv”
4862.192] (II) Unloading nv
4862.192] (II) UnloadModule: “modesetting”
4862.192] (II) Unloading modesetting
4862.192] (II) UnloadModule: “fbdev”
4862.192] (II) Unloading fbdev
4862.192] (II) UnloadSubModule: “fbdevhw”
4862.192] (II) Unloading fbdevhw
4862.192] (II) UnloadModule: “vesa”
4862.192] (II) Unloading vesa
4862.192] (–) Depth 24 pixmap format is 32 bpp
4862.192] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
4862.197] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
4862.197] (II) NVIDIA(0): may not be running or the “AcpidSocketPath” X
4862.197] (II) NVIDIA(0): configuration option may not be set correctly. When the
4862.197] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
4862.197] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
4862.197] (II) NVIDIA(0): details, please see the “ConnectToAcpid” and
4862.197] (II) NVIDIA(0): “AcpidSocketPath” X configuration options in Appendix B: X
4862.197] (II) NVIDIA(0): Config Options in the README.
4862.200] (II) NVIDIA(0): Setting mode “CRT-1:nvidia-auto-select”
4862.264] Loading extension NV-GLX
4862.277] (==) NVIDIA(0): Disabling shared memory pixmaps
4862.277] (==) NVIDIA(0): Backing store disabled
4862.277] (==) NVIDIA(0): Silken mouse enabled
4862.277] (==) NVIDIA(0): DPMS enabled
4862.277] Loading extension NV-CONTROL
4862.278] Loading extension XINERAMA
4862.278] (II) Loading sub module “dri2”
4862.278] (II) LoadModule: “dri2”
4862.278] (II) Module “dri2” already built-in
4862.278] (II) NVIDIA(0): [DRI2] Setup complete
4862.278] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
4862.278] (–) RandR disabled
4862.283] (II) AIGLX: Screen 0 is not DRI2 capable
4862.283] (II) AIGLX: Screen 0 is not DRI capable
4862.294] (II) AIGLX: Loaded and initialized swrast
4862.295] (II) GLX: Initialized DRISWRAST GL provider for screen 0
4862.343] (II) config/udev: Adding input device Power Button (/dev/input/event3)
4862.343] () Power Button: Applying InputClass “evdev keyboard catchall”
4862.343] () Power Button: Applying InputClass “evdev keyboard catchall”
4862.343] () Power Button: Applying InputClass “LocalKeyboard”
4862.343] (II) LoadModule: “evdev”
4862.343] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
4862.343] (II) Module evdev: vendor=“X.Org Foundation”
4862.343] compiled for 1.14.3, module version = 2.8.2
4862.343] Module class: X.Org XInput Driver
4862.343] ABI class: X.Org XInput driver, version 19.1
4862.343] (II) Using input driver ‘evdev’ for ‘Power Button’
4862.343] () Power Button: always reports core events
4862.343] () evdev: Power Button: Device: “/dev/input/event3”
4862.343] (–) evdev: Power Button: Vendor 0 Product 0x1
4862.343] (–) evdev: Power Button: Found keys
4862.343] (II) evdev: Power Button: Configuring as keyboard
4862.343] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3”
4862.343] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD, id 6)
4862.343] () Option “xkb_rules” “evdev”
4862.343] () Option “xkb_model” “pc104”
4862.343] () Option “xkb_layout” “us_intl”
4862.371] (II) config/udev: Adding input device Power Button (/dev/input/event2)
4862.371] () Power Button: Applying InputClass “evdev keyboard catchall”
4862.371] () Power Button: Applying InputClass “evdev keyboard catchall”
4862.371] () Power Button: Applying InputClass “LocalKeyboard”
4862.371] (II) Using input driver ‘evdev’ for ‘Power Button’
4862.371] () Power Button: always reports core events
4862.371] () evdev: Power Button: Device: “/dev/input/event2”
4862.371] (–) evdev: Power Button: Vendor 0 Product 0x1
4862.371] (–) evdev: Power Button: Found keys
4862.371] (II) evdev: Power Button: Configuring as keyboard
4862.371] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2”
4862.371] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD, id 7)
4862.371] () Option “xkb_rules” “evdev”
4862.371] () Option “xkb_model” “pc104”
4862.371] () Option “xkb_layout” “us_intl”
4862.373] (II) config/udev: Adding drm device (/dev/dri/card0)
4862.373] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event10)
4862.373] (II) No input driver specified, ignoring this device.
4862.373] (II) This device may have been added with another device file.
4862.373] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event11)
4862.373] (II) No input driver specified, ignoring this device.
4862.373] (II) This device may have been added with another device file.
4862.373] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event12)
4862.373] (II) No input driver specified, ignoring this device.
4862.373] (II) This device may have been added with another device file.
4862.373] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event5)
4862.373] (II) No input driver specified, ignoring this device.
4862.373] (II) This device may have been added with another device file.
4862.373] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event6)
4862.373] (II) No input driver specified, ignoring this device.
4862.373] (II) This device may have been added with another device file.
4862.373] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event7)
4862.373] (II) No input driver specified, ignoring this device.
4862.373] (II) This device may have been added with another device file.
4862.373] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event8)
4862.373] (II) No input driver specified, ignoring this device.
4862.373] (II) This device may have been added with another device file.
4862.373] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event9)
4862.373] (II) No input driver specified, ignoring this device.
4862.373] (II) This device may have been added with another device file.
4862.373] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event1)
4862.373] () PixArt USB Optical Mouse: Applying InputClass “evdev pointer catchall”
4862.373] () PixArt USB Optical Mouse: Applying InputClass “evdev pointer catchall”
4862.373] (II) Using input driver ‘evdev’ for ‘PixArt USB Optical Mouse’
4862.374] () PixArt USB Optical Mouse: always reports core events
4862.374] () evdev: PixArt USB Optical Mouse: Device: “/dev/input/event1”
4862.374] (–) evdev: PixArt USB Optical Mouse: Vendor 0x93a Product 0x2510
4862.374] (–) evdev: PixArt USB Optical Mouse: Found 3 mouse buttons
4862.374] (–) evdev: PixArt USB Optical Mouse: Found scroll wheel(s)
4862.374] (–) evdev: PixArt USB Optical Mouse: Found relative axes
4862.374] (–) evdev: PixArt USB Optical Mouse: Found x and y relative axes
4862.374] (II) evdev: PixArt USB Optical Mouse: Configuring as mouse
4862.374] (II) evdev: PixArt USB Optical Mouse: Adding scrollwheel support
4862.374] () evdev: PixArt USB Optical Mouse: YAxisMapping: buttons 4 and 5
4862.374] () evdev: PixArt USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
4862.374] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input14/event1”
4862.374] (II) XINPUT: Adding extended input device “PixArt USB Optical Mouse” (type: MOUSE, id 8)
4862.374] (II) evdev: PixArt USB Optical Mouse: initialized for relative axes.
4862.374] () PixArt USB Optical Mouse: (accel) keeping acceleration scheme 1
4862.374] () PixArt USB Optical Mouse: (accel) acceleration profile 0
4862.374] () PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
4862.374] () PixArt USB Optical Mouse: (accel) acceleration threshold: 4
4862.374] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse0)
4862.374] (II) No input driver specified, ignoring this device.
4862.374] (II) This device may have been added with another device file.
4862.374] (II) config/udev: Adding input device USB2.0 Camera (/dev/input/event13)
4862.374] () USB2.0 Camera: Applying InputClass “evdev keyboard catchall”
4862.374] () USB2.0 Camera: Applying InputClass “evdev keyboard catchall”
4862.374] () USB2.0 Camera: Applying InputClass “LocalKeyboard”
4862.374] (II) Using input driver ‘evdev’ for ‘USB2.0 Camera’
4862.374] () USB2.0 Camera: always reports core events
4862.374] () evdev: USB2.0 Camera: Device: “/dev/input/event13”
4862.374] (–) evdev: USB2.0 Camera: Vendor 0x1871 Product 0x1f0
4862.374] (–) evdev: USB2.0 Camera: Found keys
4862.374] (II) evdev: USB2.0 Camera: Configuring as keyboard
4862.374] (**) Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input13/event13”

[rhus]

My Xorg.0.log file part 3.

4862.374] (II) XINPUT: Adding extended input device “USB2.0 Camera” (type: KEYBOARD, id 9)
4862.375] () Option “xkb_rules” “evdev”
4862.375] () Option “xkb_model” “pc104”
4862.375] () Option “xkb_layout” “us_intl”
4862.375] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
4862.375] () AT Translated Set 2 keyboard: Applying InputClass “evdev keyboard catchall”
4862.375] () AT Translated Set 2 keyboard: Applying InputClass “evdev keyboard catchall”
4862.375] () AT Translated Set 2 keyboard: Applying InputClass “LocalKeyboard”
4862.375] (II) Using input driver ‘evdev’ for ‘AT Translated Set 2 keyboard’
4862.375] () AT Translated Set 2 keyboard: always reports core events
4862.375] () evdev: AT Translated Set 2 keyboard: Device: “/dev/input/event0”
4862.375] (–) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
4862.375] (–) evdev: AT Translated Set 2 keyboard: Found keys
4862.375] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
4862.375] () Option “config_info” “udev:/sys/devices/platform/i8042/serio0/input/input0/event0”
4862.375] (II) XINPUT: Adding extended input device “AT Translated Set 2 keyboard” (type: KEYBOARD, id 10)
4862.375] () Option “xkb_rules” “evdev”
4862.375] () Option “xkb_model” “pc104”
4862.375] () Option “xkb_layout” “us_intl”
4862.375] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
4862.376] (II) No input driver specified, ignoring this device.
4862.376] (II) This device may have been added with another device file.
4941.967] (II) config/udev: removing device PixArt USB Optical Mouse
4941.967] (II) evdev: PixArt USB Optical Mouse: Close
4941.967] (II) UnloadModule: “evdev”
4944.460] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse0)
4944.460] (II) No input driver specified, ignoring this device.
4944.460] (II) This device may have been added with another device file.
4944.460] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event1)
4944.460] () PixArt USB Optical Mouse: Applying InputClass “evdev pointer catchall”
4944.460] () PixArt USB Optical Mouse: Applying InputClass “evdev pointer catchall”
4944.460] (II) Using input driver ‘evdev’ for ‘PixArt USB Optical Mouse’
4944.460] () PixArt USB Optical Mouse: always reports core events
4944.460] () evdev: PixArt USB Optical Mouse: Device: “/dev/input/event1”
4944.460] (–) evdev: PixArt USB Optical Mouse: Vendor 0x93a Product 0x2510
4944.460] (–) evdev: PixArt USB Optical Mouse: Found 3 mouse buttons
4944.460] (–) evdev: PixArt USB Optical Mouse: Found scroll wheel(s)
4944.460] (–) evdev: PixArt USB Optical Mouse: Found relative axes
4944.460] (–) evdev: PixArt USB Optical Mouse: Found x and y relative axes
4944.460] (II) evdev: PixArt USB Optical Mouse: Configuring as mouse
4944.460] (II) evdev: PixArt USB Optical Mouse: Adding scrollwheel support
4944.460] () evdev: PixArt USB Optical Mouse: YAxisMapping: buttons 4 and 5
4944.460] () evdev: PixArt USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
4944.461] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input15/event1”
4944.461] (II) XINPUT: Adding extended input device “PixArt USB Optical Mouse” (type: MOUSE, id 8)
4944.461] (II) evdev: PixArt USB Optical Mouse: initialized for relative axes.
4944.461] () PixArt USB Optical Mouse: (accel) keeping acceleration scheme 1
4944.461] () PixArt USB Optical Mouse: (accel) acceleration profile 0
4944.461] () PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
4944.461] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
5048.255] (II) NVIDIA(0): Setting mode “CRT-1:nvidia-auto-select”
5048.321] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
5048.321] (II) NVIDIA(0): may not be running or the “AcpidSocketPath” X
5048.321] (II) NVIDIA(0): configuration option may not be set correctly. When the
5048.321] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
5048.321] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
5048.321] (II) NVIDIA(0): details, please see the “ConnectToAcpid” and
5048.321] (II) NVIDIA(0): “AcpidSocketPath” X configuration options in Appendix B: X
5048.321] (II) NVIDIA(0): Config Options in the README.
5048.383] (II) NVIDIA(GPU-0): Display (LG Electronics W2043 (CRT-1)) does not support NVIDIA
5048.383] (II) NVIDIA(GPU-0): 3D Vision stereo.
5048.390] setversion 1.4 failed

[rhus]

[QUOTEBtw, you should find the same messages in ~/.xsession-errors-:0 as I already mentioned. But that file is recreated on login, so rename it first before you login to a different session after KDE crashes.[/QUOTE]

My ".xsession-errors-:0 file.

/etc/X11/xim: Checking whether an input method should be started.
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
sourcing /etc/sysconfig/language to get the value of INPUT_METHOD
INPUT_METHOD is not set or empty (no user selected input method).
Trying to start a default input method for the locale pt_BR.UTF-8 …
There is no default input method for the current locale.
Dummy input method “none” (do not use any fancy input method by default)
startkde: Starting up…
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kbuildsycoca4 running…
QObject::connect: Cannot connect (null)::deviceFound(Device*) to BlueDevilDaemon::deviceFound(Device*)
QObject::connect: Cannot connect QTimer::timeout() to (null)::stopDiscovery()
kded(27987)/kdeui (Wallet): The kwalletd service has been disabled
QObject::connect: Cannot connect (null)::resourceScoreUpdated(QString, QString, QString, double) to NepomukPlugin::resourceScoreUpdated(QString, QString, QString, double)
QObject::connect: Cannot connect (null)::recentStatsDeleted(QString, int, QString) to NepomukPlugin::deleteRecentStats(QString, int, QString)
QObject::connect: Cannot connect (null)::earlierStatsDeleted(QString, int) to NepomukPlugin::deleteEarlierStats(QString, int)
QDBusConnection: name ‘org.kde.kglobalaccel’ had owner ‘’ but we thought it was ‘:1.5’
Object::connect: No such signal org::freedesktop::UPower:: DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower:: DeviceRemoved(QDBusObjectPath)
kded(27987) PowerDevil::Core::loadProfile: The profile “AC” tried to activate “DimDisplay” a non existent action. This is usually due to an installation problem or to a configuration problem. or simlpy the action is not supported
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
kwin(29641) KWin::EffectsHandlerImpl::loadEffect: EffectsHandler::loadEffect : Effect “kwin4_effect_blur” is not supported
kwin(29641) KWin::EffectsHandlerImpl::loadEffect: EffectsHandler::loadEffect : Effect “kwin4_effect_startupfeedback” is not supported
QDBusObjectPath: invalid path “”
plasma-desktop(30394)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(30394)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(30394)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(30394)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(30394)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(30394)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(30394)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(30394)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(30394)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(30394)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
QGraphicsLinearLayout::insertItem: cannot insert null item
plasma-desktop(30394)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
QGraphicsLinearLayout::insertItem: cannot insert null item
Object::connect: No such signal org::freedesktop::UPower:: DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower:: DeviceRemoved(QDBusObjectPath)
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
plasma-desktop(30394)/kdeui (Wallet): The kwalletd service has been disabled
========================> 7 0
static bool QDeclarativeMetaType::isModule(const QByteArray&, int, int) Qt 4.7 import detected; please note that Qt 4.7 is directly reusable as QtQuick 1.x with no code changes. Continuing, but startup time will be slower.
kded(27987)/Network Management (NetworkManager backend) ConnectionDbus::fromDbusMap: Setting “ipv4” not initialized
kded(27987)/Network Management (NetworkManager backend) ConnectionDbus::fromDbusMap: Setting “ipv6” not initialized
kded(27987)/Network Management (NetworkManager backend) ConnectionDbus::fromDbusMap: Setting “802-1x” not initialized
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
file:///usr/lib64/kde4/imports/org/kde/plasma/components/SectionScroller.qml:103: TypeError: Result of expression ‘listView’ [null] is not an object.
file:///usr/lib64/kde4/imports/org/kde/plasma/components/SectionScroller.qml:175: ReferenceError: Can’t find variable: sectionsRepeater
file:///usr/lib64/kde4/imports/org/kde/plasma/components/SectionScroller.qml:103: Error: Cannot assign [undefined] to QString
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_63: Foi detectado um ciclo de âncoras no método ‘fill’.
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_63: Foi detectado um ciclo de âncoras no método ‘fill’.
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_63: Foi detectado um ciclo de âncoras no método ‘fill’.
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_63: Foi detectado um ciclo de âncoras no método ‘fill’.
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_63: Foi detectado um ciclo de âncoras no método ‘fill’.
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_63: Foi detectado um ciclo de âncoras no método ‘fill’.
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_63: Foi detectado um ciclo de âncoras no método ‘fill’.
link XMLID_34_ hasn’t been detected!
link XMLID_34_ hasn’t been detected!
link XMLID_36_ hasn’t been detected!
link XMLID_34_ hasn’t been detected!
link XMLID_34_ hasn’t been detected!
link XMLID_36_ hasn’t been detected!
plasma-desktop(30394)/libakonadi Akonadi::AgentManagerPrivate::createDBusInterface: AgentManager failed to get a valid AgentManager DBus interface. Error is: 1 “org.freedesktop.DBus.Error.NameHasNoOwner” “Could not get owner of name ‘org.freedesktop.Akonadi.Control’: no such name”
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
plasma-desktop(30394)/libakonadi Akonadi::SessionPrivate::socketError: Socket error occurred: “QLocalSocket::connectToServer: Invalid name”
plasma-desktop(30394)/libakonadi Akonadi::SessionPrivate::socketError: Socket error occurred: “QLocalSocket::connectToServer: Invalid name”
search paths: ("/home/rhus/bin", “/usr/local/bin”, “/usr/bin”, “/bin”, “/usr/bin/X11”, “/usr/X11R6/bin”, “/usr/games”, “/opt/kde3/bin”, “/usr/lib/mit/bin”, “/usr/sbin”, “/usr/local/sbin”, “/usr/local/libexec”, “/usr/libexec”, “/opt/mysql/libexec”, “/opt/local/lib/mysql5/bin”, “/opt/mysql/sbin”)
Object::connect: No such signal org::freedesktop::UPower:: DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower:: DeviceRemoved(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower:: DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower:: DeviceRemoved(QDBusObjectPath)
usage: synaptikscfg -h] --version] {init,load,save} …
synaptikscfg: error: no touchpad found
Failed to initialize the desktop files database

01mHP Linux Imaging and Printing System (ver. 3.13.10)0m
01mSystem Tray Status Service ver. 2.00m

Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

akonadi.collectionattributetable OK
akonadi.collectionmimetyperelation OK
akonadi.collectionpimitemrelation OK
akonadi.collectiontable OK
akonadi.flagtable OK
akonadi.mimetypetable OK
akonadi.parttable OK
akonadi.pimitemflagrelation OK
akonadi.pimitemtable OK
akonadi.resourcetable OK
akonadi.schemaversiontable OK
mysql.columns_priv OK
mysql.db OK
mysql.event OK
mysql.func OK
mysql.help_category OK
mysql.help_keyword OK
mysql.help_relation OK
mysql.help_topic OK
mysql.host OK
mysql.ndb_binlog_index OK
mysql.plugin OK
mysql.proc OK
mysql.procs_priv OK
mysql.proxies_priv OK
mysql.servers OK
mysql.tables_priv OK
mysql.time_zone OK
mysql.time_zone_leap_second OK
mysql.time_zone_name OK
mysql.time_zone_transition OK
mysql.time_zone_transition_type OK
mysql.user OK
Nepomuk Query Server not available

[rhus]

My “.xsession-errors-:0” file part 2.

Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
search paths: ("/home/rhus/bin", “/usr/local/bin”, “/usr/bin”, “/bin”, “/usr/bin/X11”, “/usr/X11R6/bin”, “/usr/games”, “/opt/kde3/bin”, “/usr/lib/mit/bin”)
New PolkitAgentListener 0x1259220
Adding new listener PolkitQt1::Agent::Listener(0x140b9d0) for 0x1259220
/usr/lib64/python2.7/site-packages/gtk-2.0/gtk/init.py:127: RuntimeWarning: PyOS_InputHook is not available for interactive use of PyGTK
set_interactive(1)
Object::connect: No such signal org::freedesktop::UPower:: DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower:: DeviceRemoved(QDBusObjectPath)
search paths: ("/home/rhus/.kde4/lib64/kde4/plugins/", “/usr/lib64/kde4/plugins/”, “/usr/lib64/qt4/plugins”, “/usr/bin”, “/usr/lib64/kde4/plugins”, “/home/rhus/.kde4/lib64/kde4/”, “/usr/lib64/kde4/”)
search paths: ("/home/rhus/.kde4/lib64/kde4/plugins/", “/usr/lib64/kde4/plugins/”, “/usr/lib64/qt4/plugins”, “/usr/bin”, “/usr/lib64/kde4/plugins”, “/home/rhus/.kde4/lib64/kde4/”, “/usr/lib64/kde4/”)
plasma-desktop(30394)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
search paths: ("/home/rhus/.kde4/lib64/kde4/plugins/", “/usr/lib64/kde4/plugins/”, “/usr/lib64/qt4/plugins”, “/usr/bin”, “/usr/lib64/kde4/plugins”, “/home/rhus/.kde4/lib64/kde4/”, “/usr/lib64/kde4/”)
search paths: ("/home/rhus/.kde4/lib64/kde4/plugins/", “/usr/lib64/kde4/plugins/”, “/usr/lib64/qt4/plugins”, “/usr/bin”, “/usr/lib64/kde4/plugins”, “/home/rhus/.kde4/lib64/kde4/”, “/usr/lib64/kde4/”)
Object::connect: No such signal org::freedesktop::UPower:: DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower:: DeviceRemoved(QDBusObjectPath)
plasma-desktop(30394)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application
31;01merror: HPLIP upgrade is disabled by openSUSE for security reasons, see https://bugzilla.novell.com/show_bug.cgi?id=853405 - if you like to upgrade HPLIP, use an openSUSE software package manager like YaST or zypper.0m
Completed…
plasma-desktop(30394)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application
I/O warning : failed to load external entity “/usr/share/qalculate/prefixes.xml”
I/O warning : failed to load external entity “/usr/share/qalculate/currencies.xml”
I/O warning : failed to load external entity “/usr/share/qalculate/units.xml”
I/O warning : failed to load external entity “/usr/share/qalculate/functions.xml”
I/O warning : failed to load external entity “/usr/share/qalculate/datasets.xml”
I/O warning : failed to load external entity “/usr/share/qalculate/variables.xml”
I/O warning : failed to load external entity “/usr/share/qalculate/currencies.xml”
I/O warning : failed to load external entity “/home/rhus/.qalculate/eurofxref-daily.xml”
I/O warning : failed to load external entity “/home/rhus/.qalculate/eurofxref-daily.xml”
Object::connect: No such signal org::freedesktop::UPower:: DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower:: DeviceRemoved(QDBusObjectPath)
warning : (/home/abuild/rpmbuild/BUILD/cairo-dock-3.3.2/src/implementations/cairo-dock-glx.c:_initialize_opengl_backend:179)
couldn’t find an appropriate visual, trying to get one without Stencil buffer
(it may cause some little deterioration in the rendering) …

============================================================================
Cairo-Dock version : 3.3.2
Built with GTK : 3.10
Running with OpenGL: 1

nepomukfilewatch: cannot connect to X server :0
Application '/usr/bin/nepomukfilewatch ’ crashed! 4 restarts left.
nepomukfilewatch: cannot connect to X server :0
Application '/usr/bin/nepomukfilewatch ’ crashed! 3 restarts left.
nepomukfilewatch: cannot connect to X server :0
Application '/usr/bin/nepomukfilewatch ’ crashed! 2 restarts left.
nepomukfilewatch: cannot connect to X server :0
Application '/usr/bin/nepomukfilewatch ’ crashed! 1 restarts left.
nepomukfilewatch: cannot connect to X server :0
Application '/usr/bin/nepomukfilewatch ’ crashed! 0 restarts left.
nepomukfilewatch: cannot connect to X server :0
Application '/usr/bin/nepomukfilewatch ’ crashed to often. Giving up!
hp-systray: Fatal IO error: client killed
cairo-dock: Fatal IO error 11 (Recurso temporariamente indisponível) on X server :0.

akonadi_agent_launcher: Fatal IO error: client killed
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
kded4: Fatal IO error: client killed
QtDBus: cannot relay signals from parent QObject(0x19898f0 “”) unless they are emitted in the object’s thread QThread(0x16901c0 “”). Current thread is QProcessManager(0x7f45cebf0520 “”).
QProcess: Destroyed while process is still running.
akonadi_agent_launcher: Fatal IO error: client killed
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit.
kglobalaccel: Fatal IO error: client killed
akonadi_agent_launcher: Fatal IO error: client killed
akonadi_agent_launcher: Fatal IO error: client killed
akonadi_mailfilter_agent: Fatal IO error: client killed
akonadi_archivemail_agent: Fatal IO error: client killed
klauncher: Exiting on signal 15
klauncher: Exiting on signal 1
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
akonadi_newmailnotifier_agent: Fatal IO error: client killed
akonadi_maildispatcher_agent: Fatal IO error: client killed
Control process died, committing suicide!
akonadi_sendlater_agent: Fatal IO error: client killed
ProcessControl: Application ‘/usr/bin/akonadi_agent_launcher’ returned with exit code 1 (Unknown error)
ProcessControl: Application ‘/usr/bin/akonadi_agent_launcher’ returned with exit code 1 (Unknown error)
ProcessControl: Application ‘/usr/bin/akonadi_agent_launcher’ returned with exit code 1 (Unknown error)
ProcessControl: Application ‘/usr/bin/akonadi_agent_launcher’ returned with exit code 1 (Unknown error)
akonadi_nepomuk_feeder: Fatal IO error: client killed
ProcessControl: Application ‘/usr/bin/akonadi_maildispatcher_agent’ returned with exit code 1 (Unknown error)
ProcessControl: Application ‘/usr/bin/akonadi_nepomuk_feeder’ returned with exit code 1 (Unknown error)
ProcessControl: Application ‘/usr/bin/akonadi_newmailnotifier_agent’ returned with exit code 1 (Unknown error)
ProcessControl: Application ‘/usr/bin/akonadi_sendlater_agent’ returned with exit code 1 (Unknown error)
ProcessControl: Application ‘/usr/bin/akonadi_archivemail_agent’ returned with exit code 1 (Unknown error)
ProcessControl: Application ‘/usr/bin/akonadi_mailfilter_agent’ returned with exit code 1 (Unknown error)
D-Bus session bus went down - quitting
No protocol specified
akonadi_agent_launcher: cannot connect to X server :0
No protocol specified
No protocol specified
akonadi_maildispatcher_agent: cannot connect to X server :0
No protocol specified
akonadi_agent_launcher: cannot connect to X server :0
No protocol specified
No protocol specified
akonadi_mailfilter_agent: cannot connect to X server :0
akonadi_agent_launcher: cannot connect to X server :0
No protocol specified
akonadi_newmailnotifier_agent: cannot connect to X server :0
No protocol specified
akonadi_nepomuk_feeder: cannot connect to X server :0
No protocol specified
akonadi_sendlater_agent: cannot connect to X server :0
No protocol specified
akonadi_archivemail_agent: cannot connect to X server :0
ProcessControl: Application ‘/usr/bin/akonadi_sendlater_agent’ returned with exit code 1 (Unknown error)
ProcessControl: Application ‘/usr/bin/akonadi_agent_launcher’ returned with exit code 1 (Unknown error)
ProcessControl: Application ‘/usr/bin/akonadi_maildispatcher_agent’ returned with exit code 1 (Unknown error)
ProcessControl: Application ‘/usr/bin/akonadi_agent_launcher’ returned with exit code 1 (Unknown error)
ProcessControl: Application ‘/usr/bin/akonadi_agent_launcher’ returned with exit code 1 (Unknown error)
ProcessControl: Application ‘/usr/bin/akonadi_mailfilter_agent’ returned with exit code 1 (Unknown error)
ProcessControl: Application ‘/usr/bin/akonadi_archivemail_agent’ returned with exit code 1 (Unknown error)
ProcessControl: Application ‘/usr/bin/akonadi_newmailnotifier_agent’ returned with exit code 1 (Unknown error)
ProcessControl: Application ‘/usr/bin/akonadi_nepomuk_feeder’ returned with exit code 1 (Unknown error)
ProcessControl: Application ‘/usr/bin/akonadi_agent_launcher’ returned with exit code 1 (Unknown error)
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit.
D-Bus session bus went down - quitting
Application ‘akonadiserver’ exited normally…

[wolfi323]

@rhus

I can not do that.

What does that mean?
Do you not know how to do it?
Or does it not work?

Anyway, your problem is clear now, your nvidia installation is broken:

@rhus

My Xorg.0.log file part 2.

…
4861.385] (**) NVIDIA(0): Enabling 2D acceleration
4861.385] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
4861.385] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
4861.385] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
4861.385] (EE) NVIDIA(0): you continue to encounter problems, Please try
4861.385] (EE) NVIDIA(0): reinstalling the NVIDIA driver.

Apparently you lack nvidia’s libglx:

4861.378] (II) LoadModule: “glx”
4861.378] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
4861.378] (II) Module glx: vendor=“X.Org Foundation”
4861.378] compiled for 1.14.3.901, module version = 1.0.0
4861.378] ABI class: X.Org Server Extension, version 7.0
4861.378] (==) AIGLX enabled
4861.378] Loading extension GLX

How did you install the driver?
If you downloaded the .run installer from nvidia, you have to reinstall it after every update to the kernel, Xorg, and Mesa.
This definitely looks like nvidia’s libglx has been overwritten with the original Xorg implementation by an update to xorg-x11-server (which the .run installer overwrites in the first place).

If you installed via the packages from the repo, check that you have nvidia-glG03 installed. If in doubt, post the output of:

rpm -qa | grep nvidia

[rhus]

@wolfi323

What does that mean?
Do you not know how to do it?
Or does it not work?

I do not see the Recovery option.

If you installed via the packages from the repo, check that you have nvidia-glG03 installed.

I install “nvidia-gfxG03-kmp-desktop” from the repo.

rpm -qa | grep nvidia

nvidia-gfxG03-kmp-desktop-340.65_k3.16.6_2-32.1.x86_64
nvidia-uvm-gfxG03-kmp-desktop-340.58_k3.16.6_2-31.1.x86_64
nvidia-computeG03-340.65-32.1.x86_64
nvidia-uvm-gfxG03-kmp-desktop-340.65_k3.16.6_2-32.1.x86_64
x11-video-nvidiaG03-340.65-32.1.x86_64
nvidia-gfxG03-kmp-desktop-340.58_k3.16.6_2-31.1.x86_64
nvidia-glG03-340.65-32.1.x86_64