I am can't setup video cam Samsung vp-d375w

I can not configure a driver for Linux SUSE for this video cameras
All information below was written for this camera
please help. This camera should work as a web camera (at least it worked well under windovs)

63: USB 00.0: 0000 Unclassified device
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_4e8_120f_noserial_if0
Unique ID: 2UT6.ZZTtqRcrtG1
Parent ID: k4bc.MrJLBLcWB9F
SysFS ID: /devices/pci0000:00/0000:00:13.5/usb1/1-3/1-3:1.0
SysFS BusID: 1-3:1.0
Hardware Class: unknown
Model: “Samsung Electronics SAMSUNG CAMCORDER”
Hotplug: USB
Vendor: usb 0x04e8 “Samsung Electronics Co., Ltd”
Device: usb 0x120f “SAMSUNG CAMCORDER”
Revision: “90.03”
Speed: 480 Mbps
Module Alias: “usb:v04E8p120Fd9003dc00dsc00dp00icFFisc00ipFF”
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #57 (Hub)

64: USB 00.1: 0401 Multimedia audio controller
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_4e8_120f_noserial_if1
Unique ID: VfjA.8j7FfphuLA9
Parent ID: k4bc.MrJLBLcWB9F
SysFS ID: /devices/pci0000:00/0000:00:13.5/usb1/1-3/1-3:1.1
SysFS BusID: 1-3:1.1
Hardware Class: sound
Model: “Samsung Electronics SAMSUNG CAMCORDER”
Hotplug: USB
Vendor: usb 0x04e8 “Samsung Electronics Co., Ltd”
Device: usb 0x120f “SAMSUNG CAMCORDER”
Revision: “90.03”
Driver: “snd-usb-audio”
Driver Modules: “snd_usb_audio”
Speed: 480 Mbps
Module Alias: “usb:v04E8p120Fd9003dc00dsc00dp00ic01isc01ip00”
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #57 (Hub)

The problem in such cases is the manufacturers typically either do not support their devices under Linux, or the support they provide is poor.

For webcams (and hence also a videocam in your case) please check to see if your videocam is supported. The information here:

Vendor: usb 0x04e8 "Samsung Electronics Co., Ltd"
Device: usb 0x120f "SAMSUNG CAMCORDER"

will provide you what you need, when you look here to see if it should be supported: HCL/Web Cameras - openSUSE