HP Laserjet M1132 MFP - Coming up as busy.

Hi again,

In a previous thread I was having this problem. I thought it would be solved when I installed Leap 15.1. I formatted and installed my root and swap partitions and left my /home alone. I followed the instructions here https://en.opensuse.org/SDB:How_to_set-up_a_HP_printer

For your information:

@linux-8s7p:~> lpstat -t
scheduler is running
no system default destination
device for HP_LaserJet_Professional_M1132_MFP: hp:/usb/HP_LaserJet_Professional_M1132_MFP?serial=000000000QH4RWPZPR1a
HP_LaserJet_Professional_M1132_MFP accepting requests since Sun 10 Nov 2019 21:38:03 GMT
printer HP_LaserJet_Professional_M1132_MFP is idle.  enabled since Sun 10 Nov 2019 21:38:03 GMT

# egrep -i "name|model|filter" /etc/cups/ppd/*
*PCFileName: "hp-laserjet_professional_m1132_mfp.ppd"
*ModelName: "HP LaserJet Professional m1132 MFP"
*ShortNickName: "hp_laserjet_professional_m1132_ hpijs"
*NickName: "HP LaserJet Professional m1132 MFP, hpcups 3.18.6, requires proprietary plugin"
*cupsModelName: "HP LaserJet 1018"
*cupsModelNumber: 0
*cupsFilter: "application/vnd.cups-raster 0 hpcups"
*OpenUI *ColorModel/Output Mode: PickOne
*OrderDependency: 10 AnySetup *ColorModel
*DefaultColorModel: Gray
*ColorModel Gray/Grayscale: "<</cupsColorSpace 3/cupsBitsPerColor 1/cupsRowCount 1/cupsRowStep 2>>setpagedevice"
*CloseUI: *ColorModel

# zypper se -si hplip
Loading repository data...
Reading installed packages...

S  | Name        | Type    | Version          | Arch   | Repository          
i+ | hplip       | package | 3.18.6-lp151.1.1 | x86_64 | Main Repository     
i  | hplip-hpijs | package | 3.18.6-lp151.1.1 | x86_64 | Main Repository     
i  | hplip-hpijs | package | 3.18.6-lp151.1.1 | x86_64 | openSUSE-Leap-15.1-1
i  | hplip-sane  | package | 3.18.6-lp151.1.1 | x86_64 | Main Repository     
i  | hplip-sane  | package | 3.18.6-lp151.1.1 | x86_64 | openSUSE-Leap-15.1-1

Thank you again in advance.

I normally get the plugin and asc file direct from: https://developers.hp.com/hp-linux-imaging-and-printing/plugins

If you connect to the cups interface at http://localhost:631 you should be able to check it’s status and clear the issue, or restart the cups service.

The printer seems to be reported as expected ie idle and accepting requests.

I note that you’re now using the HPLIP driver (as opposed to the last thread where you had foomatic-rip configured).

Thank you so much. All sorted now, although I don’t know how. I was getting this error https://paste.opensuse.org/51972258 yesterday and today it is printing. I haven’t even turned the machine off. Thank you again for persevering with me and the printer.

Glad to read that it is now working as expected. Well done. :slight_smile: