ich habe hier einen HP Envy 4500 am USB-Port. Er druckt einwandfrei. Aber das Scannen funktioniert nicht (übrigens auch nicht mehr unter Windows 10). Aktuelle Firmware ist installiert. Auch die HP-Devel-Treiber haben leider keine Abhilfe geschaffen.
Was uns aufgefallen ist: im Stand alone Betrieb funktioniert auch nicht die Kopierfunktion!
Gibt es noch irgendeine Möglichkeit, die Scanfunktion unter Leap 15.4 zu aktivieren (ggf. über WLAN, was ich auf die Schnelle nicht zum Laufen gebracht habe)? Falls nein, würden mich ggf. auch die technischen Hintergründe interessieren: ist das ein reines Softwareproblem oder ein Hardwaredefekt?
Das bringt mich tatsächlich weiter! Die HP-Tools zeigen den Scanner jetzt als funktionierend an und es gibt eine Funktion zum Scannen. Wenn ich allerdings das Icon klicke öffnet sich Xsane und beim Scannen lautet die Fehlermeldung “Konnte Scanner nicht starten Gerät besetzt”? Liegt das vielleicht daran, dass ich nicht hplip-sane verwende? (Der Rechner steht beim Nachbarn.)
Beim Start eines anständigen Scan-Programms wie “simple-scan” sollte die Installation des BLOB’s automatisch starten, sobald man mit dem root-Passwort die Zustimmung erteilt hat. https://wiki.ubuntuusers.de/Simple_Scan/
Ansonsten sollte die Installation des Scan-Modul-BLOB’s auch über die Kommandozeile mit dem Befehl:
hp-plugin
gestartet werden können. Siehe dazu:
hp-plugin --help
Voraussetzung ist natürlich ein installiertes Softwarepaket (RPM) namens hplip und hplip-sane.
Natürlich muss der HP-Multifunktionsdrucker per USB-Kabel am Linux-Rechner angeschlossen sein, ansonsten funktioniert die Scan-Funktion nicht!
Hier wäre es angebracht, sich Gedanken zu machen, den Tintenstrahldrucker durch einen Laserdrucker zu ersetzen. Für Privathaushalte empfehle ich ausschliesslich den Einsatz von Laserdruckern. Ich habe vor kurzem den HP Color LaserJet Pro MFP M283fdw gekauft und bin damit sehr zufrieden. Vor dem Kauf eines Laserdruckers die Hinweise in der Rubrik “Schlafen ohne Tonerstaub” unter: https://www.heise.de/select/ct/2022/15/2200714212188898232
beachten. Und die Linux-Kompatibilität unter: https://developers.hp.com/hp-linux-imaging-and-printing/supported_devices/index
abklären.
Bei selten verwendeten Tintendrucker trocknet die Tinte häufig ein und muss mühsam mit dem Reinigungsprogramm wieder flott gemacht werden. Der Tintenauffangbehälter läuft durch die stetige Reinigung beim Gerätestart nach dem jahrelangen Gebrauch über und ruiniert das darunterliegende Möbel. Der Sensor für die Druckausrichtung funktioniert irgendwann nicht mehr, weil er mit Tintenstaub zu geschmiert ist und muss mühsam mit Wattestäbchen freigelegt werden. Nach einigen Jahren muss der Druckkopf kostspielig ausgewechselt werden und nach rund 12 Jahren erhält man von HP keine Tintenpatronen und Ersatzmaterialien wie Druckköpfe mehr…
Meine Überlegung ist momentan, die von *yast *angelegten Konfigurationen erst mal wieder zu löschen und dann mit hp-setup als root neu zu konfigurieren? *xsane *möchte ich auch löschen und dann alternativ hp-sane installieren (falls nicht schon geschehen :-).
Die Ausgabe von
zypper se -si hplip
werde ich morgen hier nachtragen.
Das mit dem BLOB klingt interessant, aber es ist für den unbedarften User wohl zu kompliziert in der Anwendung.
Jetzt nochmal zu meiner Eingangsfrage: **Offenbar sind HP Multifunktionsdrucker allgemein nicht ganz so trivial zu installieren unter Linux (so ganz allgemein gefragt)? Anscheinend laufen sie ja auch nicht so ganz innerhalb des yast-Standards (zumindest, was das scannen mit *sane *angeht; evtl. auch CUPS betreffend)? **Auch unter Windows 10 war es mit dem Envy 4500 zuletzt schwierig, weil die aktuellen Treiber nicht mehr funktioniert haben. Aber wie erklärt sich die Tatsache, dass das die Kopierfunktion noch nicht einmal mehr bei ausgeschaltetem PC unterstützt wird?
hp-check
**Saving output in log file: /home/detlef/hp-check.log**
**HP Linux Imaging and Printing System (ver. 3.21.10)**
**Dependency/Version Check Utility ver. 15.1**
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
**Note: hp-check can be run in three modes:**
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball
(.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm,
etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above
cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
**warning: 3-15.4 version is not supported. Using 3-15.3 versions dependencies to verify and install...**
---------------
| SYSTEM INFO |
---------------
Kernel: 5.14.21-150400.22-default #1 SMP PREEMPT_DYNAMIC Wed May 11 06:57:18 UTC 2022 (49db222) GNU/Linux
Host: DetlefLaux-PC
Proc: 5.14.21-150400.22-default #1 SMP PREEMPT_DYNAMIC Wed May 11 06:57:18 UTC 2022 (49db222) GNU/Linux
Distribution: 3 15.4
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.21.10
HPLIP-Home: /usr/share/hplip
**warning: HPLIP-Installation: Auto installation is not supported for 3 distro 15.4 version**
**Current contents of '/etc/hp/hplip.conf' file:**
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.21.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/cups/model/manufacturer-PPDs/hplip
ppdbase=/usr/share/cups/model/manufacturer-PPDs
doc=/usr/share/doc/packages/hplip
html=/usr/share/doc/packages/hplip
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/lib/cups/driver
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=no
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=no
cups-ppd-install=yes
internal-tag=3.21.10
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
**Current contents of '/var/lib/hp/hplip.state' file:**
Plugins are not installed. Could not access file: No such file or directory
**Current contents of '~/.hplip/hplip.conf' file:**
**warning: Could not access file: No such file or directory**
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <C
omment>
-------------------------
| External Dependencies |
-------------------------
cups CUPS - Common Unix Printing System REQUIRED 1.1
2.2.7 OK 'CUPS Scheduler is running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05
9.52 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9
0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0
1.0.32 OK -
dbus DBus - Message bus system REQUIRED -
1.12.2 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL -
0.116 OK -
network network -wget OPTIONAL -
1.20.3 OK -
**error: avahi-utils avahi-utils OPTIONAL - **
- MISSING 'avahi-utils needs to be installed'
------------------------
| General Dependencies |
------------------------
**error: libjpeg libjpeg - JPEG library REQUIRED - **
- MISSING 'libjpeg needs to be installed'
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED -
2.2.7 OK -
cups-image CUPS image - CUPS image development files REQUIRED -
2.2.7 OK -
libpthread libpthread - POSIX threads library REQUIRED -
b'2.31' OK -
libusb libusb - USB library REQUIRED -
1.0 OK -
sane SANE - Scanning library REQUIRED -
- OK -
**error: sane-devel SANE - Scanning library development files REQUIRED - **
- MISSING 'sane-devel needs to be installed'
**error: libavahi-dev libavahi-dev REQUIRED - **
- MISSING 'libavahi-dev needs to be installed'
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9
5.7.3 OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED -
1.1.1 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2
3.6.15 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL
- - OK -
**error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 **
- MISSING 'python3-pyqt4-dbus needs to be installed'
**error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 **
- MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0
1.2.16 OK -
python3-xml Python XML libraries REQUIRED -
2.4.4 OK -
python3-devel Python devel - Python development files REQUIRED 2.2
3.6.15 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL
- 8.4.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0
3.4.0 OK -
--------------
| COMPILEDEP |
--------------
**error: libtool libtool - Library building support services REQUIRED - **
- MISSING 'libtool needs to be installed'
**error: gcc gcc - GNU Project C and C++ Compiler REQUIRED - **
7.5.0 MISSING 'gcc needs to be installed'
make make - GNU make utility to maintain groups of programs REQUIRED 3.0
4.2.1 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED -
3.21.10 OK -
hpmudext IO-Extension REQUIRED -
3.21.10 OK -
----------------------
| Scan Configuration |
----------------------
hpaio HPLIP-SANE-Backend REQUIRED -
3.21.10 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED -
3.21.10 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `hpaio:/usb/ENVY_4500_series?serial=CN39H2M0PY05X4' is a Hewlett-Packard ENVY_4500_series all-in-one
device `hpaio:/net/ENVY_4500_series?ip=192.168.2.192' is a Hewlett-Packard ENVY_4500_series all-in-one
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
-------------------------------------------- ----------------------
hp:/usb/ENVY_4500_series?serial=CN39H2M0PY05 HP ENVY 4500 series
X4
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
**ENVY_4500**
**---------**
Type: Printer
Device URI: hp:/net/ENVY_4500_series?ip=192.168.2.192
PPD: /etc/cups/ppd/ENVY_4500.ppd
PPD Description: HP Envy 4500 Series, hpcups 3.21.10
Printer status: Drucker ENVY_4500 ist im Leerlauf. Aktiviert seit Mi 13 Jul 2022 08:36:27 CEST
Communication status: Good
**hpenvy4500series**
**----------------**
Type: Printer
Device URI: hp:/usb/ENVY_4500_series?serial=CN39H2M0PY05X4
PPD: /etc/cups/ppd/hpenvy4500series.ppd
PPD Description: HP Envy 4500 Series, hpcups 3.21.10
Printer status: Drucker hpenvy4500series ist im Leerlauf. Aktiviert seit Mi 13 Jul 2022 08:18:26 CEST
Communication status: Good
--------------
| PERMISSION |
--------------
USB hpenvy4500series Required - - OK Node:'/dev/bus/usb/0
08/003' Perm:' root lp rw- rw- rw- rw- r--'
-----------
| SUMMARY |
-----------
**Missing Required Dependencies**
**-----------------------------**
**error: 'libjpeg-devel' package is missing/incompatible**
**error: 'zlib-devel' package is missing/incompatible**
**error: 'sane-backends-devel' package is missing/incompatible**
**error: 'libavahi-devel' package is missing/incompatible**
**error: 'libtool' package is missing/incompatible**
**error: 'libgphoto2-devel' package is missing/incompatible**
**error: 'rpm-build' package is missing/incompatible**
**error: 'gcc-c++' package is missing/incompatible**
**Missing Optional Dependencies**
**-----------------------------**
**error: 'avahi-utils' package is missing/incompatible**
**error: 'dbus-1-python3-devel' package is missing/incompatible**
**error: 'dbus-1-python3' package is missing/incompatible**
Total Errors: 8
Total Warnings: 1
Done.
HP Linux Imaging and Printing System (ver. 3.21.10) Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
(Note: Defaults for each question are maked with a ‘*’. Press <enter> to accept the default.)
SELECT CONNECTION (I/O) TYPE
Num Connection Description
Type
0* usb Universal Serial Bus (USB)
1 net Network/Ethernet/Wireless (direct connection or JetDirect)
*Enter number 0…1 for connection type (q=quit, enter=usb) ? **0
Using connection type: usb
Setting up device: hp:/usb/ENVY_4500_series?serial=CN39H2M0PY05X4
PRINT QUEUE SETUP
warning: One or more print queues already exist for this device: hpenvy4500series.
*Would you like to install another print queue for this device (y=yes, n=no, q=quit) ? **n
Sind das bloß fehlende Abhängigkeiten oder liegt ein Hardwaredefekt zugrunde?
Kannst du nachinstallieren, einige sind zum Kompilieren nötig, andere um hp-setup grafisch aufzurufen, andere um die Druckerunterstützung zu aktivieren.
DISCOVERED SCANNER DEVICES
device hpaio:/usb/ENVY_4500_series?serial=CN39H2M0PY05X4' is a Hewlett-Packard ENVY_4500_series all-in-one device hpaio:/net/ENVY_4500_series?ip=192.168.2.192’ is a Hewlett-Packard ENVY_4500_series all-in-one
Sind doch da, einmal als USB und einmal als Net-Device…
Ich habe jetzt erst noch einmal die fehlenden Abhängigkeiten aufgelöst und die Treiber neu installiert:
hp-check
**Saving output in log file: /home/detlef/hp-check.log**
**HP Linux Imaging and Printing System (ver. 3.21.10)**
**Dependency/Version Check Utility ver. 15.1**
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
**Note: hp-check can be run in three modes:**
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball
(.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm,
etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above
cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
**warning: 3-15.4 version is not supported. Using 3-15.3 versions dependencies to verify and install...**
---------------
| SYSTEM INFO |
---------------
Kernel: 5.14.21-150400.22-default #1 SMP PREEMPT_DYNAMIC Wed May 11 06:57:18 UTC 2022 (49db222) GNU/Linux
Host: DetlefLaux-PC
Proc: 5.14.21-150400.22-default #1 SMP PREEMPT_DYNAMIC Wed May 11 06:57:18 UTC 2022 (49db222) GNU/Linux
Distribution: 3 15.4
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.21.10
HPLIP-Home: /usr/share/hplip
**warning: HPLIP-Installation: Auto installation is not supported for 3 distro 15.4 version **
**Current contents of '/etc/hp/hplip.conf' file:**
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.21.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/cups/model/manufacturer-PPDs/hplip
ppdbase=/usr/share/cups/model/manufacturer-PPDs
doc=/usr/share/doc/packages/hplip
html=/usr/share/doc/packages/hplip
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/lib/cups/driver
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=no
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=no
cups-ppd-install=yes
internal-tag=3.21.10
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
**Current contents of '/var/lib/hp/hplip.state' file:**
Plugins are not installed. Could not access file: No such file or directory
**Current contents of '~/.hplip/hplip.conf' file:**
**warning: Could not access file: No such file or directory**
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <C
omment>
-------------------------
| External Dependencies |
-------------------------
cups CUPS - Common Unix Printing System REQUIRED 1.1
2.2.7 OK 'CUPS Scheduler is running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05
9.52 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9
0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0
1.0.32 OK -
dbus DBus - Message bus system REQUIRED -
1.12.2 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL -
0.116 OK -
network network -wget OPTIONAL -
1.20.3 OK -
avahi-utils avahi-utils OPTIONAL -
0.8 OK -
------------------------
| General Dependencies |
------------------------
libjpeg libjpeg - JPEG library REQUIRED -
- OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED -
2.2.7 OK -
cups-image CUPS image - CUPS image development files REQUIRED -
2.2.7 OK -
libpthread libpthread - POSIX threads library REQUIRED -
b'2.31' OK -
libusb libusb - USB library REQUIRED -
1.0 OK -
sane SANE - Scanning library REQUIRED -
1.0.32 OK -
sane-devel SANE - Scanning library development files REQUIRED -
1.0.32 OK -
libavahi-dev libavahi-dev REQUIRED -
- OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9
5.7.3 OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED -
1.1.1 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2
3.6.15 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL
- - OK -
** error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 **
- MISSING 'python3-pyqt4-dbus needs to be installed'
** error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 **
- MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0
1.2.16 OK -
python3-xml Python XML libraries REQUIRED -
2.4.4 OK -
python3-devel Python devel - Python development files REQUIRED 2.2
3.6.15 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL
- 8.4.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0
3.4.0 OK -
--------------
| COMPILEDEP |
--------------
libtool libtool - Library building support services REQUIRED -
2.4.6 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED -
7.5.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0
4.2.1 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED -
3.21.10 OK -
hpmudext IO-Extension REQUIRED -
3.21.10 OK -
----------------------
| Scan Configuration |
----------------------
hpaio HPLIP-SANE-Backend REQUIRED -
3.21.10 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED -
3.21.10 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `hpaio:/usb/ENVY_4500_series?serial=CN39H2M0PY05X4' is a Hewlett-Packard ENVY_4500_series all-in-one
device `hpaio:/net/ENVY_4500_series?ip=192.168.2.192' is a Hewlett-Packard ENVY_4500_series all-in-one
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
-------------------------------------------- ----------------------
hp:/usb/ENVY_4500_series?serial=CN39H2M0PY05 HP ENVY 4500 series
X4
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
**ENVY_4500**
**---------**
Type: Printer
Device URI: hp:/net/ENVY_4500_series?ip=192.168.2.192
PPD: /etc/cups/ppd/ENVY_4500.ppd
PPD Description: HP Envy 4500 Series, hpcups 3.21.10
Printer status: Drucker ENVY_4500 ist im Leerlauf. Aktiviert seit Mi 13 Jul 2022 08:36:27 CEST
Communication status: Good
**hpenvy4500series**
**----------------**
Type: Printer
Device URI: hp:/usb/ENVY_4500_series?serial=CN39H2M0PY05X4
PPD: /etc/cups/ppd/hpenvy4500series.ppd
PPD Description: HP Envy 4500 Series, hpcups 3.21.10
Printer status: Drucker hpenvy4500series ist im Leerlauf. Aktiviert seit Mi 13 Jul 2022 08:18:26 CEST
Communication status: Good
--------------
| PERMISSION |
--------------
USB hpenvy4500series Required - - OK Node:'/dev/bus/usb/0
08/003' Perm:' root lp rw- rw- rw- rw- r--'
-----------
| SUMMARY |
-----------
**Missing Required Dependencies**
**-----------------------------**
None
**Missing Optional Dependencies**
**-----------------------------**
**error: 'dbus-1-python3-devel' package is missing/incompatible **
**error: 'dbus-1-python3' package is missing/incompatible **
Total Errors: 2
Total Warnings: 1
Done.
hp-setup -i
**HP Linux Imaging and Printing System (ver. 3.21.10)**
**Printer/Fax Setup Utility ver. 9.0**
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
--------------------------------
| SELECT CONNECTION (I/O) TYPE |
--------------------------------
Num Connection Description
Type
-------- ---------- ----------------------------------------------------------
0* usb Universal Serial Bus (USB)
1 net Network/Ethernet/Wireless (direct connection or JetDirect)
**Enter number 0...1 for connection type (q=quit, enter=usb*) ? **0
Using connection type: usb
**Setting up device: hp:/usb/ENVY_4500_series?serial=CN39H2M0PY05X4**
---------------------
| PRINT QUEUE SETUP |
---------------------
**warning: One or more print queues already exist for this device: ENVY_4500.**
**Would you like to install another print queue for this device (y=yes, n=no*, q=quit) ? **n
Done.