On 07/06/2014 02:56 PM, derek botha wrote:
>
> Hi lwfinger
>
> Find below output for commands as reqeusted:
>
>
> Code:
> --------------------
> linux-36ab:~ # lspci -nnv
> 00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RS690 Host Bridge [1002:7910]
> Subsystem: Hewlett-Packard Company Device [103c:30c2]
> Flags: bus master, 66MHz, medium devsel, latency 64
>
> 00:01.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RS690 PCI to PCI Bridge (Internal gfx) [1002:7912] (prog-if 00 [Normal decode])
> Flags: bus master, 66MHz, medium devsel, latency 64
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 00004000-00004fff
> Memory behind bridge: d0400000-d05fffff
> Prefetchable memory behind bridge: 00000000c0000000-00000000c7ffffff
> Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [b0] Subsystem: Hewlett-Packard Company Device [103c:30c2]
> Kernel modules: shpchp
>
> 00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:7914] (prog-if 00 [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
> Memory behind bridge: d0000000-d00fffff
> Capabilities: [50] Power Management version 3
> Capabilities: [58] Express Root Port (Slot+), MSI 00
> Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
> Capabilities: [b0] Subsystem: Hewlett-Packard Company Device [103c:30c2]
> Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [100] Virtual Channel
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RS690 PCI to PCI Bridge (PCI Express Port 1) [1002:7915] (prog-if 00 [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
> I/O behind bridge: 00002000-00003fff
> Memory behind bridge: cc000000-cfffffff
> Capabilities: [50] Power Management version 3
> Capabilities: [58] Express Root Port (Slot+), MSI 00
> Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
> Capabilities: [b0] Subsystem: Hewlett-Packard Company Device [103c:30c2]
> Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [100] Virtual Channel
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:06.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RS690 PCI to PCI Bridge (PCI Express Port 2) [1002:7916] (prog-if 00 [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=30, subordinate=30, sec-latency=0
> Memory behind bridge: c8000000-c80fffff
> Capabilities: [50] Power Management version 3
> Capabilities: [58] Express Root Port (Slot+), MSI 00
> Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
> Capabilities: [b0] Subsystem: Hewlett-Packard Company Device [103c:30c2]
> Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [100] Virtual Channel
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:12.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0])
> Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB600 Non-Raid-5 SATA [1002:4380]
> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
> I/O ports at 9000 [size=8]
> I/O ports at 9008 [size=4]
> I/O ports at 9010 [size=8]
> I/O ports at 5018 [size=4]
> I/O ports at 5020 [size=16]
> Memory at d0609000 (32-bit, non-prefetchable) [size=1]
> Capabilities: [60] Power Management version 2
> Kernel driver in use: ahci
>
> 00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI])
> Subsystem: Hewlett-Packard Company Device [103c:30c2]
> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 23
> Memory at d0601000 (32-bit, non-prefetchable) [size=4]
> Kernel driver in use: ohci-pci
> Kernel modules: ohci_pci
>
> 00:13.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI])
> Subsystem: Hewlett-Packard Company Device [103c:30c2]
> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
> Memory at d0602000 (32-bit, non-prefetchable) [size=4]
> Kernel driver in use: ohci-pci
> Kernel modules: ohci_pci
>
> 00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI])
> Subsystem: Hewlett-Packard Company Device [103c:30c2]
> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
> Memory at d0603000 (32-bit, non-prefetchable) [size=4]
> Kernel driver in use: ohci-pci
> Kernel modules: ohci_pci
>
> 00:13.3 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI])
> Subsystem: Hewlett-Packard Company Device [103c:30c2]
> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
> Memory at d0604000 (32-bit, non-prefetchable) [size=4]
> Kernel driver in use: ohci-pci
> Kernel modules: ohci_pci
>
> 00:13.4 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI])
> Subsystem: Hewlett-Packard Company Device [103c:30c2]
> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
> Memory at d0605000 (32-bit, non-prefetchable) [size=4]
> Kernel driver in use: ohci-pci
> Kernel modules: ohci_pci
>
> 00:13.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI])
> Subsystem: Hewlett-Packard Company Device [103c:30c2]
> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 23
> Memory at d0606000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [c0] Power Management version 2
> Capabilities: [e4] Debug port: BAR=1 offset=00e0
> Kernel driver in use: ehci-pci
>
> 00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 14)
> Subsystem: Hewlett-Packard Company Device [103c:30c2]
> Flags: 66MHz, medium devsel
> I/O ports at 8200 [size=16]
> Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
> Kernel driver in use: piix4_smbus
> Kernel modules: i2c_piix4, sp5100_tco
>
> 00:14.1 IDE interface [0101]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 IDE [1002:438c] (prog-if 82 [Master PriP])
> Subsystem: Hewlett-Packard Company Device [103c:30c2]
> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
> I/O ports at 01f0 [size=8]
> I/O ports at 03f4
> I/O ports at 0170 [size=8]
> I/O ports at 0374
> I/O ports at 5040 [size=16]
> Kernel driver in use: pata_atiixp
> Kernel modules: pata_atiixp, pata_acpi, ata_generic
>
> 00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383]
> Subsystem: Hewlett-Packard Company Device [103c:30c2]
> Flags: bus master, slow devsel, latency 64, IRQ 16
> Memory at 84000000 (64-bit, non-prefetchable) [size=16]
> Capabilities: [50] Power Management version 2
> Kernel driver in use: snd_hda_intel
> Kernel modules: snd_hda_intel
>
> 00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 PCI to LPC Bridge [1002:438d]
> Subsystem: Hewlett-Packard Company Device [103c:30c2]
> Flags: bus master, 66MHz, medium devsel, latency 0
>
> 00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
> Flags: bus master, VGA palette snoop, 66MHz, medium devsel, latency 64
> Bus: primary=00, secondary=02, subordinate=06, sec-latency=64
> I/O behind bridge: 00001000-00001fff
> Memory behind bridge: d0100000-d03fffff
> Prefetchable memory behind bridge: 80000000-83ffffff
>
> 00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
> Flags: fast devsel
> Capabilities: [80] HyperTransport: Host or Secondary Interface
>
> 00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
> Flags: fast devsel
>
> 00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
> Flags: fast devsel
> Kernel modules: amd64_edac_mod
>
> 00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
> Flags: fast devsel
> Capabilities: [f0] Secure device <?>
> Kernel driver in use: k8temp
> Kernel modules: k8temp
>
> 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RS690M [Radeon Xpress 1200/1250/1270] [1002:791f] (prog-if 00 [VGA controller])
> Subsystem: Hewlett-Packard Company Device [103c:30c2]
> Flags: bus master, fast devsel, latency 64, IRQ 43
> Memory at c0000000 (64-bit, prefetchable) [size=128]
> Memory at d0400000 (64-bit, non-prefetchable) [size=64]
> I/O ports at 4000 [size=256]
> Memory at d0500000 (32-bit, non-prefetchable) [size=1]
> Expansion ROM at <unassigned> [disabled]
> Capabilities: [50] Power Management version 2
> Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit+
> Kernel driver in use: radeon
> Kernel modules: radeon
>
> 02:04.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b6)
> Subsystem: Hewlett-Packard Company Device [103c:30c2]
> Flags: bus master, medium devsel, latency 168, IRQ 20
> Memory at d0100000 (32-bit, non-prefetchable) [size=4]
> Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
> Memory window 0: 80000000-83ffffff (prefetchable)
> Memory window 1: 88000000-8bffffff
> I/O window 0: 00001000-000010ff
> I/O window 1: 00001400-000014ff
> 16-bit legacy interface ports at 0001
> Kernel driver in use: yenta_cardbus
> Kernel modules: yenta_socket
>
> 02:04.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 02) (prog-if 10 [OHCI])
> Subsystem: Hewlett-Packard Company Device [103c:30c2]
> Flags: bus master, medium devsel, latency 64, IRQ 21
> Memory at d0101000 (32-bit, non-prefetchable) [size=2]
> Capabilities: [dc] Power Management version 2
> Kernel driver in use: firewire_ohci
> Kernel modules: firewire_ohci
>
> 10:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express [14e4:1693] (rev 02)
> Subsystem: Hewlett-Packard Company Device [103c:30c2]
> Physical Slot: 1
> Flags: bus master, fast devsel, latency 0, IRQ 44
> Memory at d0000000 (64-bit, non-prefetchable) [size=64]
> Expansion ROM at <ignored> [disabled]
> Capabilities: [48] Power Management version 3
> Capabilities: [50] Vital Product Data
> Capabilities: [58] Vendor Specific Information: Len=78 <?>
> Capabilities: [e8] MSI: Enable+ Count=1/1 Maskable- 64bit+
> Capabilities: [d0] Express Endpoint, MSI 00
> Capabilities: [100] Advanced Error Reporting
> Capabilities: [13c] Virtual Channel
> Capabilities: [160] Device Serial Number 00-1a-4b-ff-fe-86-12-1b
> Capabilities: [16c] Power Budgeting <?>
> Kernel driver in use: tg3
> Kernel modules: tg3
>
> --------------------
>
>
>
> Code:
> --------------------
>
> linux-36ab:~ # lsusb
> Bus 004 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>
> --------------------
>
>
> Also, the system is opensuse 13.1 (sorry for the mistake) and im running
> windows in a dual boot. In windows the wireless is comming on and is
> were i checked the device type to be Broadcom.
>
> As said in my first post - i believe the problem is that the wireless is
> not comming on and subseqeuntly not being picked up by the kernel -
> though i can be dismally wrong in this as well.
>
> Let me know if you need any additional information.
BTW: It is openSUSE, not opensuse!
Neither your lspci nor lsusb output show any wireless devices. I have no idea
how wireless can possibly work on Windows. One thing you might do is check the
network devices in the Windows Device Manager. For the wireless device, right
click to get the properties, and then click on details. You should see “VEN_”
followed by 4 digits, and “DEV_” followed by 4 more digits. Report those two
sets of numbers here.
[/size][/size][/size][/size][/size][/size][/size][/size][/size][/size][/size][/size][/size][/size][/size][/size][/size][/size][/size][/size][/size][/size][/size][/size]