It have switched from an nvidia to a radeon video card. I have installed xf86-video-amdgpu and made sure that I have the latest kernel-firmware.
I have 2 screens and now I can’t get the left screen with the start menu and thew system settings. They are on the left in the never, never land.
xrandr recognizes both screens:
> xrandr
Screen 0: minimum 320 x 200, current 3840 x 1080, maximum 16384 x 16384
DisplayPort-0 disconnected (normal left inverted right x axis y axis)
DisplayPort-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 510mm x 290mm
1920x1080 60.00*+
1680x1050 59.88
1280x1024 75.02 60.02
1440x900 60.00
1280x800 60.00
1152x864 75.00
1280x720 60.00
1024x768 75.03 60.00
800x600 75.00 60.32
640x480 75.00 59.94
720x400 70.08
DisplayPort-2 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 509mm x 286mm
1920x1080 60.00*+ 50.00 59.94
1680x1050 59.88
1280x1024 75.02 60.02
1440x900 74.98 59.90
1280x960 60.00
1280x800 60.00
1152x864 75.00
1280x720 60.00 50.00 59.94
1440x576 50.00
1024x768 75.03 70.07 60.00
1440x480 60.00 59.94
832x624 74.55
800x600 72.19 75.00 60.32 56.25
720x576 50.00
720x480 60.00 59.94
640x480 75.00 72.81 66.67 60.00 59.94
720x400 70.08
HDMI-A-0 disconnected (normal left inverted right x axis y axis)
DVI-D-0 disconnected (normal left inverted right x axis y axis)
here’s inxi
> inxi -Fxx
System: Host: ethelbert Kernel: 4.12.14-lp151.28.7-default x86_64 bits: 64 gcc: 7.4.0
Desktop: KDE Plasma 5.12.8 (Qt 5.9.7) dm: sddm,sddm Distro: openSUSE Leap 15.1
Machine: Device: desktop Mobo: MSI model: 970A-G46 (MS-7693) v: 2.0 serial: N/A
BIOS: American Megatrends v: V2.8 date: 01/08/2016
CPU: Octa core AMD FX-8350 Eight-Core (-MCP-) arch: Bulldozer rev.0 cache: 16384 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 64001
clock speeds: min/max: 1400/4000 MHz 1: 4000 MHz 2: 4000 MHz 3: 4000 MHz 4: 4000 MHz 5: 4000 MHz
6: 4000 MHz 7: 4000 MHz 8: 4000 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] Ellesmere [Radeon RX 470/480/570/580]
bus-ID: 01:00.0 chip-ID: 1002:67df
Display Server: x11 (X.Org 1.20.3 ) drivers: amdgpu (unloaded: modesetting,fbdev,vesa)
Resolution: 1920x1080@60.00hz, 1920x1080@60.00hz
OpenGL: renderer: N/A version: N/A Direct Render: N/A
Audio: Card-1 Advanced Micro Devices [AMD/ATI] Ellesmere [Radeon RX 580]
driver: snd_hda_intel bus-ID: 01:00.1 chip-ID: 1002:aaf0
Card-2 Advanced Micro Devices [AMD/ATI] SBx00 Azalia (Intel HDA)
driver: snd_hda_intel bus-ID: 00:14.2 chip-ID: 1002:4383
Sound: Advanced Linux Sound Architecture v: k4.12.14-lp151.28.7-default
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: d000 bus-ID: 04:00.0 chip-ID: 10ec:8168
IF: eth0 state: up speed: 100 Mbps duplex: half mac: d4:3d:7e:29:97:4e
Drives: HDD Total Size: 6001.2GB (34.9% used)
ID-1: /dev/sda model: WDC_WD30EFRX size: 3000.6GB serial: WD-WCC4N3TA43RK
ID-2: /dev/sdb model: WDC_WD30EFRX size: 3000.6GB serial: WD-WCC4N1EFVRS2
Partition: ID-1: / size: 322G used: 9.3G (4%) fs: ext4 dev: /dev/sda2
ID-2: /home size: 2.4T used: 316G (14%) fs: ext4 dev: /dev/sda3
ID-3: swap-1 size: 12.46GB used: 0.00GB (0%) fs: swap dev: /dev/sda4
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 214 Uptime: 0:20 Memory: 1167.9/11886.9MB
Init: systemd v: 234 runlevel: 5 default: graphical.target Gcc sys: 7.4.0
Client: Shell (bash 4.4.231 running in konsole) inxi: 2.3.40
How can I get to the system settings to rearrange the monitors? I’m missing the left part of the desktop that has all the icons and the panels
Thanks