HELPme to config my Sound Card , Please

[user]

Hi evrybody, i need configure my sound card…i tryed with Yast, i also quit the PulseAudio because i have KDE version…
well
here are my cards
AZALIA SBX00 INTEL HDA
RAEDON X1200 SERIES AUDIO CONTROLLER

both cards are onboard in my PC…
weel i executed some codes for you can see it

hwinfo --sound

21: PCI 14.2: 0403 Audio device
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_4383
Unique ID: 5Dex.FGh1LamaGK8
SysFS ID: /devices/pci0000:00/0000:00:14.2
SysFS BusID: 0000:00:14.2
Hardware Class: sound
Model: “ATI SBx00 Azalia (Intel HDA)”
Vendor: pci 0x1002 “ATI Technologies Inc”
Device: pci 0x4383 “SBx00 Azalia (Intel HDA)”
SubVendor: pci 0x1019 “Elitegroup Computer Systems”
SubDevice: pci 0x2615
Driver: “HDA Intel”
Driver Modules: “snd_hda_intel”
Memory Range: 0xfe7f4000-0xfe7f7fff (rw,non-prefetchable)
IRQ: 16 (90914 events)
Module Alias: “pci:v00001002d00004383sv00001019sd00002615bc04sc03 i00”
Driver Info #0:
Driver Status: snd_hda_intel is active
Driver Activation Cmd: “modprobe snd_hda_intel”
Config Status: cfg=no, avail=yes, need=no, active=unknown

30: PCI 105.2: 0403 Audio device
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_7919
Unique ID: dP62.3eubOLksOn3
Parent ID: vSkL.HjQnVRFuoa8
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:05.2
SysFS BusID: 0000:01:05.2
Hardware Class: sound
Model: “ATI Radeon X1200 Series Audio Controller”
Vendor: pci 0x1002 “ATI Technologies Inc”
Device: pci 0x7919 “Radeon X1200 Series Audio Controller”
SubVendor: pci 0x1002 “ATI Technologies Inc”
SubDevice: pci 0x7919
Driver: “HDA Intel”
Driver Modules: “snd_hda_intel”
Memory Range: 0xfe9e8000-0xfe9ebfff (rw,non-prefetchable)
IRQ: 19 (328701 events)
Module Alias: “pci:v00001002d00007919sv00001002sd00007919bc04sc03 i00”
Driver Info #0:
Driver Status: snd_hda_intel is active
Driver Activation Cmd: “modprobe snd_hda_intel”
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #10 (PCI bridge)

and more…

speaker-test 1.0.18

Playback device is plug:front
Stream parameters are 48000Hz, S16_LE, 2 channels
WAV file(s)
Playback open error: -16,Dispositivo o recurso ocupado
Playback open error: -16,Dispositivo o recurso ocupado
Playback open error: -16,Dispositivo o recurso ocupado
Playback open error: -16,Dispositivo o recurso ocupado
Playback open error: -16,Dispositivo o recurso ocupado

rpm -q libasound2
libasound2-1.0.18-8.7

rpm -qa | grep pulse
pulseaudio-module-zeroconf-0.9.12-9.6
libpulsecore4-0.9.12-9.6
pulseaudio-utils-0.9.12-9.6
pulseaudio-module-jack-0.9.12-9.6
libpulse0-0.9.12-9.6
libpulse-mainloop-glib0-0.9.12-9.6
alsa-plugins-pulse-1.0.18-6.12
pulseaudio-module-lirc-0.9.12-9.6
pulseaudio-0.9.12-9.6
pulseaudio-module-bluetooth-0.9.12-9.6
libpulse-browse0-0.9.12-9.6
pulseaudio-esound-compat-0.9.12-9.6
libxine1-pulse-1.1.15-20.8
pulseaudio-module-x11-0.9.12-9.6

rpm -qa | grep alsa
alsa-utils-1.0.18-6.4
alsa-plugins-pulse-1.0.18-6.12
alsa-firmware-1.0.17-1.42
alsa-oss-1.0.17-1.37
alsa-1.0.18-8.7
alsa-plugins-1.0.18-6.12

cat /etc/modprobe.d/sound

options snd slots=snd-hda-intel

dP62.3eubOLksOn3:Radeon X1200 Series Audio Controller

alias snd-card-0 snd-hda-intel

Only thing more…these code was get it before than i quite de Pulse Audio, and Alsa its now configurated i have a lot of codecs installed but i havent sound yet…

[oldcpu]

Please, with your PC connected to the internet, open a konsole and type:su -c ‘/usr/sbin/alsa-info.sh’ and enter root password when prompted, and then post here the URL that it provides. Just the URL.

[user]

thanks so much for your answer…
now i run the script and here is the link
http://www.alsa-project.org/db/?f=19f90758403f7f5260e4baaeb22ce224135b4199

[oldcpu]

@Xiumeteo

thanks so much for your answer…
now i run the script and here is the link
http://www.alsa-project.org/db/?f=19f90758403f7f5260e4baaeb22ce224135b4199

According to that, your PC has a STAC9221. I believe that should “just work” with openSUSE-11.1 which has alsa 1.0.18a.

!!Amixer output
!!-------------

!!-------Mixer controls for card 0 [SB]

Card hw:0 ‘SB’/‘HDA ATI SB at 0xfe7f4000 irq 16’
Mixer name : ‘SigmaTel STAC9221 A2’
Simple mixer control ‘Front’,0
Capabilities: pvolume pswitch
Front Left: Playback 88 [69%] -29.25dB] [on]
Front Right: Playback 88 [69%] -29.25dB] [on]
Simple mixer control ‘Surround’,0
Capabilities: pvolume pswitch
Front Left: Playback 127 [100%] [0.00dB] [off]
Front Right: Playback 127 [100%] [0.00dB] [off]
Simple mixer control ‘Center’,0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Mono: Playback 127 [100%] [0.00dB] [off]
Simple mixer control ‘LFE’,0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Mono: Playback 127 [100%] [0.00dB] [off]
Simple mixer control ‘Line In as Output’,0
Capabilities: pswitch pswitch-joined
Mono: Playback [off]
Simple mixer control ‘IEC958’,0
Capabilities: pswitch pswitch-joined
Mono: Playback [off]
Simple mixer control ‘IEC958 Default PCM’,0
Capabilities: pswitch pswitch-joined
Mono: Playback [on]
Simple mixer control ‘Swap Center/LFE’,0
Capabilities: pswitch pswitch-joined
Mono: Playback [off]I find your mixer settings quite confusing, … In some cases you have items at 100% but switched OFF. …

You could also try some edits to your /etc/modprobe.d/sound file. I note this list of model options for the STAC9221 for 1.0.18a of alsa:

	STAC9220/9221
	  ref		Reference board
	  3stack	D945 3stack
	  5stack	D945 5stack + SPDIF
	  intel-mac-v1	Intel Mac Type 1
	  intel-mac-v2	Intel Mac Type 2
	  intel-mac-v3	Intel Mac Type 3
	  intel-mac-v4	Intel Mac Type 4
	  intel-mac-v5	Intel Mac Type 5
	  intel-mac-auto Intel Mac (detect type according to subsystem id)
	  macmini	Intel Mac Mini (equivalent with type 3)
	  macbook	Intel Mac Book (eq. type 5)
	  macbook-pro-v1 Intel Mac Book Pro 1st generation (eq. type 3)
	  macbook-pro	Intel Mac Book Pro 2nd generation (eq. type 3)
	  imac-intel	Intel iMac (eq. type 2)
	  imac-intel-20	Intel iMac (newer version) (eq. type 3)
	  dell-d81	Dell (unknown)
	  dell-d82	Dell (unknown)
	  dell-m81	Dell (unknown)
	  dell-m82	Dell XPS M1210

Lets say you have a Dell and wish to apply the model option “dell-d81”. To do that, add a line to your /etc/modprobe.d/sound file as follows:

options snd slots=snd-hda-intel
options snd-hda-intel model=dell-d81
# dP62.3eubOLksOn3:Radeon X1200 Series Audio Controller
alias snd-card-0 snd-hda-intel

and then restart your alsa sound driver with: ‘su -c rcalsasound restart’ and restart your mixer and test your sound.

When testing your sound, copy and paste the following line into a konsole:
speaker-test -c2 -l5 -twavand you should (if your sound works) hear a lady’s voice saying ‘LEFT RIGHT’,‘LEFT FRONT’ five times.

If in stead you wished to try “dell-m82”, then just replace “dell-m81” with “dell-m82” and restart your alsa sound driver and mixer.

Try each of the model options, one at a time, in the list I gave you (above) from ALSA-Configuration.txt file. Restart your alsa sound driver and restart your mixer with each attempt.

[user]

hi well
there are two problemas but thnaks for response

1. I cant open de the file etc/modprobe.d/sound when a trying the console says Denegate, and when i open the file with a text editor say me the file cant be save
2. my PC isnt from a industry as Dell, IBM, or Mac, Vaio, etc, my PC is armed, have some pieces of differents company
   thanks

[oldcpu]

@Xiumeteo

1. I cant open de the file etc/modprobe.d/sound when a trying the console says Denegate, and when i open the file with a text editor say me the file cant be save

This is very basic linux. Very basic. You need to use root permissions to do this. Type the following in a kde konsole:kdesu kwrite /etc/modprobe.d/sound
and then edit the /etc/modprobe.d/sound file

@Xiumeteo

2. my PC isnt from a industry as Dell, IBM, or Mac, Vaio, etc, my PC is armed, have some pieces of differents company
   thanks

That does not matter. Its not uncommon for the settings of a Dell to work on some other manufacturer’s motherboard, or visa versa.

I still recommend you just follow my previous recommendation and try each one as noted.