Hey im completly new at linux i have opensuse v. 11 and im trying to connect to a wireless internet. I have been in hardware info and the wirless card shows up i just dont know how to get in to connect. The info that i do have:

01:05.0 network controller.Broadcom Corporation BCM4306 802.11b/g wireless LAN controller (rev 03)

01:06.0 network controller: Realtek semicondutor CO, Ltd. RTL-8185 IEEE 802.11a/b/g wireless LAN controller (rev 20)

01:05.0 0280: 14e4: 4320 (rev 03)
01:06.0 0200: 10ec: 8185 (rev 20)

Im using the KDE interface, any help would be amazing. Thanks

some good help here:
Madwifi or Ndiswrapper Wireless Network Drivers - Suse/openSUSE 10, 11 - LAN & Internet access

read and follow links

The RTL8185 should work. All you need to do is use the NetworkManager applet in
the lower right-hand corner of the screen and click on the “New Connection” entry.

The BCM4306 needs firmware to be installed. You should enter the command ‘dmesg
| grep b43’ to see what the system thinks. If that device is a PCI card, there
may be an additional problem as some of those contained an SPROM programming
error. If you issue the command ‘/sbin/lspci -nnv’ and post the first two lines
for the BCM4306 device, I can tell if you have that problem.


PS: your subject could have been a bit more informative.