HELP !!! USB card Reader doesn't read SD card openSUSE 11.0

English Hardware
#1

Newbie question:
My HP desktop has a 8-in-1 card reader. The card reader works fine with Vista, but when I insert the SD Card (4gig) in openSUSE 11.0 (32 bit) nothing happens. Ironically the openSUSE recognizes the hardware but that’s all. The SD card never get mounted.

Below are the results of ‘lsusb’ and ‘fdisk -l’ commands.

#lsusb
Bus 005 Device 004: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

#fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x02cc02cb

Device Boot Start End Blocks Id System
/dev/sda1 * 1 13968 112197928+ 83 Linux
/dev/sda2 13969 14593 5020312+ f W95 Ext’d (LBA)
/dev/sda5 13969 14593 5020281 82 Linux swap / Solaris

#2

I have the same problem. I changed an ASUS m/board for a MSI m/board and similatneously upgraded from openSUSE 10.3 to 11.0.
The card reader worked fine on the old setup, but doesn’t respond on the new one.
It has power, the cables are okay, but it acts like its dead. I get equivalant output to the other bloke.

Any ideas??