I have a fresh TW install, only a couple of days old. I went into system settings and in “Screen Locking” i set that to “never” and unchecked the “Lock after waking from sleep” Next i went to "Power Management, and in there I set (from top to bottom) “Do Nothing” “Show Logout Screen” Unchecked “Change Screen Brightness”, Set “Dim Automatically” to “never” and “Turn off Screen” to “10 minutes When Locked and Unlocked” follow finally by power profile to “Power Save” Left the next box blank and the last box says “after 9 minutes”
I assume “When Locked and Unlocked” really means “When Locked or Unlocked”?
Anyway, my 2 screens shut off as expected but after a minute or two they come right back on.
How do i set this up so my dual monitor screens turn off after n minutes of inactivity and stay off until i press a key or move the mouse?
@erbenton AMD GPU and using amdgpu driver?
no, sorry i should have added this:
2 NVidia GPU’s with one handling the 2 displays:
01:00.0 VGA compatible controller: NVIDIA Corporation TU106 [GeForce RTX 2060 Rev. A] (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation TU104 [GeForce RTX 2060] (rev a1)
@erbenton Are you using the Nvidia rpms? Can you show the output from inxi -GSaz
Yes using the the Yast rpms.
Here is a part of inxi (i can post it all if you want but i don’t think its relevant
Graphics:
Device-1: NVIDIA TU106 [GeForce RTX 2060 Rev. A] vendor: eVga.com.
driver: nvidia v: 550.100 alternate: nouveau,nvidia_drm non-free: 550.xx+
status: current (as of 2024-06; EOL~2026-12-xx) arch: Turing code: TUxxx
process: TSMC 12nm FF built: 2018-2022 pcie: gen: 3 speed: 8 GT/s lanes: 8
link-max: lanes: 16 ports: active: none off: DP-1,HDMI-A-1 empty: DVI-D-1
bus-ID: 01:00.0 chip-ID: 10de:1f08 class-ID: 0300
Device-2: NVIDIA TU104 [GeForce RTX 2060] vendor: eVga.com. driver: nvidia
v: 550.100 alternate: nouveau,nvidia_drm non-free: 550.xx+ status: current
(as of 2024-06; EOL~2026-12-xx) arch: Turing code: TUxxx
process: TSMC 12nm FF built: 2018-2022 pcie: gen: 1 speed: 2.5 GT/s
lanes: 8 link-max: gen: 3 speed: 8 GT/s lanes: 16 ports: active: none
empty: DP-2,DVI-D-2,HDMI-A-2 bus-ID: 02:00.0 chip-ID: 10de:1e89
class-ID: 0300
Display: x11 server: X.Org v: 21.1.12 with: Xwayland v: 24.1.1
compositor: kwin_x11 driver: X: loaded: nvidia
unloaded: fbdev,modesetting,vesa alternate: nouveau,nv
gpu: nvidia,nvidia-nvswitch display-ID: :0 screens: 1
Screen-1: 0 s-res: 3840x1080 s-dpi: 81 s-size: 1204x343mm (47.40x13.50")
s-diag: 1252mm (49.29")
Monitor-1: DP-1 note: disabled pos: primary,left model: Asus VE278
serial: L5LMTF027363 built: 2020 res: 1920x1080 hz: 60 dpi: 82 gamma: 1.2
chroma: red: x: 0.647 y: 0.333 green: x: 0.282 y: 0.608 blue: x: 0.149
y: 0.071 white: x: 0.314 y: 0.329 size: 598x336mm (23.54x13.23")
diag: 686mm (27") ratio: 16:9 modes: 1920x1080, 1680x1050, 1280x1024,
1440x900, 1280x960, 1152x864, 1280x720, 1440x576, 1024x768, 1440x480,
800x600, 720x576, 720x480, 640x480
Monitor-2: HDMI-A-1 mapped: HDMI-0 note: disabled pos: right
model: Asus VE278 serial: L2LMTF059243 built: 2020 res: 1920x1080 hz: 60
dpi: 82 gamma: 1.2 chroma: red: x: 0.647 y: 0.333 green: x: 0.282 y: 0.608
blue: x: 0.149 y: 0.071 white: x: 0.314 y: 0.329
size: 598x336mm (23.54x13.23") diag: 686mm (27") ratio: 16:9
modes: 1920x1080, 1680x1050, 1280x1024, 1440x900, 1280x960, 1152x864,
1280x720, 1440x576, 1024x768, 1440x480, 800x600, 720x576, 720x480,
640x480
API: EGL v: 1.5 hw: drv: nvidia platforms: device: 0 drv: nvidia device: 1
drv: nvidia device: 4 drv: swrast gbm: drv: nvidia surfaceless: drv: nvidia
x11: drv: nvidia inactive: wayland,device-2,device-3
API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 550.100
glx-v: 1.4 direct-render: yes renderer: NVIDIA GeForce RTX 2060/PCIe/SSE2
memory: 5.86 GiB
API: Vulkan v: 1.3.290 layers: 1 device: 0 type: discrete-gpu
name: NVIDIA GeForce RTX 2060 driver: N/A device-ID: 10de:1f08
surfaces: xcb,xlib device: 1 type: discrete-gpu
name: NVIDIA GeForce RTX 2060 driver: N/A device-ID: 10de:1e89
surfaces: N/A
@erbenton It is, it shows your boot options DE etc…inxi -Saz --zu
How do i attach a file here?
@erbenton can’t you past the info like last time?
I just thought it would be neater, but here is the entire output
System:
Host: xxxxxl Kernel: 6.10.5-1-default arch: x86_64 bits: 64
compiler: gcc v: 13.3.1 clocksource: tsc avail: acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-6.10.5-1-default
root=UUID=af26f547-9ebd-4513-87f9-195b8953179b splash=silent quiet
security=apparmor mitigations=off
Desktop: KDE Plasma v: 6.1.4 tk: Qt v: N/A info: frameworks v: 6.5.0
wm: kwin_x11 tools: avail: xscreensaver vt: 2 dm: SDDM Distro: openSUSE
Tumbleweed 20240823
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
Mobo: ASUSTeK model: ROG MAXIMUS Z790 HERO v: Rev 1.xx
serial: <superuser required> part-nu: SKU uuid: <superuser required>
UEFI: American Megatrends v: 2301 date: 05/22/2024
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Keyboard K270
serial: 75-9e-51-8a charge: 100% (should be ignored) rechargeable: yes
status: discharging
Device-2: hidpp_battery_1 model: Logitech Wireless Mouse M525
serial: 3d-f7-02-6a charge: 100% (should be ignored) rechargeable: yes
status: discharging
Memory:
System RAM: total: 32 GiB available: 31.11 GiB used: 3.61 GiB (11.6%)
Message: For most reliable report, use superuser + dmidecode.
Array-1: capacity: 256 GiB slots: 4 modules: 2 EC: None
max-module-size: 64 GiB note: est.
Device-1: Controller0-DIMM0 type: no module installed
Device-2: Controller0-DIMM1 type: DDR5 detail: synchronous size: 16 GiB
speed: 7200 MT/s volts: note: check curr: 1 min: 1 max: 1 width (bits):
data: 64 total: 64 manufacturer: G Skill Intl part-no: F5-7200J3445G16G
serial: N/A
Device-3: Controller1-DIMM0 type: no module installed
Device-4: Controller1-DIMM1 type: DDR5 detail: synchronous size: 16 GiB
speed: 7200 MT/s volts: note: check curr: 1 min: 1 max: 1 width (bits):
data: 64 total: 64 manufacturer: G Skill Intl part-no: F5-7200J3445G16G
serial: N/A
PCI Slots:
Permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: 13th Gen Intel Core i9-13900KF bits: 64 type: MST AMCP
arch: Raptor Lake gen: core 13 level: v3 note: check built: 2022+
process: Intel 7 (10nm) family: 6 model-id: 0xB7 (183) stepping: 1
microcode: 0x123
Topology: cpus: 1x cores: 24 mt: 8 tpc: 2 st: 16 threads: 32 smt: enabled
cache: L1: 2.1 MiB desc: d-16x32 KiB, 8x48 KiB; i-8x32 KiB, 16x64 KiB
L2: 32 MiB desc: 8x2 MiB, 4x4 MiB L3: 36 MiB desc: 1x36 MiB
Speed (MHz): avg: 862 high: 1096 min/max: 800/5500:5800:4300 scaling:
driver: intel_pstate governor: powersave cores: 1: 800 2: 801 3: 1078 4: 800
5: 1067 6: 800 7: 1096 8: 800 9: 800 10: 801 11: 1063 12: 1081 13: 931
14: 800 15: 1043 16: 1029 17: 800 18: 800 19: 800 20: 800 21: 800 22: 800
23: 800 24: 800 25: 800 26: 800 27: 800 28: 800 29: 800 30: 800 31: 800
32: 800 bogomips: 191744
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
arch_capabilities arch_lbr arch_perfmon art avx avx2 avx_vnni bmi1 bmi2
bts clflush clflushopt clwb cmov constant_tsc cpuid cpuid_fault cx16 cx8
de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est f16c flexpriority
flush_l1d fma fpu fsgsbase fsrm fxsr gfni hfi ht hwp hwp_act_window
hwp_epp hwp_notify hwp_pkg_req ibpb ibrs ibrs_enhanced ibt ida intel_pt
invpcid lahf_lm lm mca mce md_clear mmx monitor movbe movdir64b movdiri
msr mtrr nonstop_tsc nopl nx ospke pae pat pbe pclmulqdq pdcm pdpe1gb
pebs pge pku pln pni popcnt pse pse36 pts rdpid rdrand rdseed rdtscp
rep_good sdbg sep serialize sha_ni smap smep split_lock_detect ss ssbd
sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc
tsc_adjust tsc_deadline_timer tsc_known_freq umip vaes vme vmx vnmi
vpclmulqdq vpid waitpkg x2apic xgetbv1 xsave xsavec xsaveopt xsaves
xtopology xtpr
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: reg_file_data_sampling status: Vulnerable
Type: retbleed status: Not affected
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 status: Vulnerable: __user pointer sanitization and
usercopy barriers only; no swapgs barriers
Type: spectre_v2 status: Vulnerable; IBPB: disabled; STIBP: disabled;
PBRSB-eIBRS: Vulnerable; BHI: Vulnerable
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA TU106 [GeForce RTX 2060 Rev. A] vendor: eVga.com.
driver: nvidia v: 550.100 alternate: nouveau,nvidia_drm non-free: 550.xx+
status: current (as of 2024-06; EOL~2026-12-xx) arch: Turing code: TUxxx
process: TSMC 12nm FF built: 2018-2022 pcie: gen: 3 speed: 8 GT/s lanes: 8
link-max: lanes: 16 ports: active: none off: DP-1,HDMI-A-1 empty: DVI-D-1
bus-ID: 01:00.0 chip-ID: 10de:1f08 class-ID: 0300
Device-2: NVIDIA TU104 [GeForce RTX 2060] vendor: eVga.com. driver: nvidia
v: 550.100 alternate: nouveau,nvidia_drm non-free: 550.xx+ status: current
(as of 2024-06; EOL~2026-12-xx) arch: Turing code: TUxxx
process: TSMC 12nm FF built: 2018-2022 pcie: gen: 1 speed: 2.5 GT/s
lanes: 8 link-max: gen: 3 speed: 8 GT/s lanes: 16 ports: active: none
empty: DP-2,DVI-D-2,HDMI-A-2 bus-ID: 02:00.0 chip-ID: 10de:1e89
class-ID: 0300
Display: x11 server: X.Org v: 21.1.12 with: Xwayland v: 24.1.1
compositor: kwin_x11 driver: X: loaded: nvidia
unloaded: fbdev,modesetting,vesa alternate: nouveau,nv
gpu: nvidia,nvidia-nvswitch display-ID: :0 screens: 1
Screen-1: 0 s-res: 3840x1080 s-dpi: 81 s-size: 1204x343mm (47.40x13.50")
s-diag: 1252mm (49.29")
Monitor-1: DP-1 note: disabled pos: primary,left model: Asus VE278
serial: L5LMTF027363 built: 2020 res: 1920x1080 hz: 60 dpi: 82 gamma: 1.2
chroma: red: x: 0.647 y: 0.333 green: x: 0.282 y: 0.608 blue: x: 0.149
y: 0.071 white: x: 0.314 y: 0.329 size: 598x336mm (23.54x13.23")
diag: 686mm (27") ratio: 16:9 modes: 1920x1080, 1680x1050, 1280x1024,
1440x900, 1280x960, 1152x864, 1280x720, 1440x576, 1024x768, 1440x480,
800x600, 720x576, 720x480, 640x480
Monitor-2: HDMI-A-1 mapped: HDMI-0 note: disabled pos: right
model: Asus VE278 serial: L2LMTF059243 built: 2020 res: 1920x1080 hz: 60
dpi: 82 gamma: 1.2 chroma: red: x: 0.647 y: 0.333 green: x: 0.282 y: 0.608
blue: x: 0.149 y: 0.071 white: x: 0.314 y: 0.329
size: 598x336mm (23.54x13.23") diag: 686mm (27") ratio: 16:9
modes: 1920x1080, 1680x1050, 1280x1024, 1440x900, 1280x960, 1152x864,
1280x720, 1440x576, 1024x768, 1440x480, 800x600, 720x576, 720x480,
640x480
API: EGL v: 1.5 hw: drv: nvidia platforms: device: 0 drv: nvidia device: 1
drv: nvidia device: 4 drv: swrast gbm: drv: nvidia surfaceless: drv: nvidia
x11: drv: nvidia inactive: wayland,device-2,device-3
API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 550.100
glx-v: 1.4 direct-render: yes renderer: NVIDIA GeForce RTX 2060/PCIe/SSE2
memory: 5.86 GiB
API: Vulkan v: 1.3.290 layers: 1 device: 0 type: discrete-gpu
name: NVIDIA GeForce RTX 2060 driver: N/A device-ID: 10de:1f08
surfaces: xcb,xlib device: 1 type: discrete-gpu
name: NVIDIA GeForce RTX 2060 driver: N/A device-ID: 10de:1e89
surfaces: N/A
Audio:
Device-1: Intel Raptor Lake High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel alternate: snd_soc_avs,snd_sof_pci_intel_tgl
bus-ID: 00:1f.3 chip-ID: 8086:7a50 class-ID: 0403
Device-2: NVIDIA TU106 High Definition Audio vendor: eVga.com.
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 8
link-max: lanes: 16 bus-ID: 01:00.1 chip-ID: 10de:10f9 class-ID: 0403
Device-3: NVIDIA TU104 HD Audio vendor: eVga.com. driver: snd_hda_intel
v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 8 link-max: lanes: 16
bus-ID: 02:00.1 chip-ID: 10de:10f8 class-ID: 0403
Device-4: ASUSTek USB Audio driver: hid-generic,snd-usb-audio,usbhid
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-6:3
chip-ID: 0b05:1a53 class-ID: 0300
API: ALSA v: k6.10.5-1-default status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: PipeWire v: 1.2.2 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Raptor Lake-S PCH CNVi WiFi driver: iwlwifi v: kernel
bus-ID: 00:14.3 chip-ID: 8086:7a70 class-ID: 0280
IF: wlp0s20f3 state: down mac: f0:d4:15:8f:dd:f1
Device-2: Intel Ethernet I226-V vendor: ASUSTeK driver: igc v: kernel
pcie: gen: 2 speed: 5 GT/s lanes: 1 port: N/A bus-ID: 08:00.0
chip-ID: 8086:125c class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 08:bf:b8:04:77:b4
IP v4: 192.168.0.10/24 scope: global broadcast: 192.168.0.255
IP v6: fe80::abf:b8ff:fe04:77b4/64 virtual: proto kernel_ll scope: link
Info: services: sshd,xinetd
WAN IP: 174.61.216.46
Bluetooth:
Device-1: Intel AX211 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-14:14 chip-ID: 8087:0033
class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 2 state: up address: F0:D4:15:8F:DD:F5
bt-v: 5.3 lmp-v: 12 status: discoverable: no pairing: no class-ID: 7c0104
Logical:
Message: No logical block device data found.
RAID:
Hardware-1: Intel Volume Management Device NVMe RAID Controller Intel
driver: vmd v: 0.6 port: N/A bus-ID: 00:0e.0 chip-ID: 8086:a77f rev:
class-ID: 0104
Supported mdraid levels: raid1
Device-1: md1 maj-min: 9:1 type: mdraid level: mirror status: active
size: 3.64 TiB
Info: report: 2/2 UU blocks: 3906885440 chunk-size: N/A super-blocks: 1.2
Components: Online:
0: sdc1 maj-min: 8:33 size: 3.64 TiB
1: sdb1 maj-min: 8:17 size: 3.64 TiB
Drives:
Local Storage: total: 17.74 TiB used: 5.29 TiB (29.8%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 990 PRO 2TB
size: 1.82 TiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: S73WNJ0W315761E fw-rev: 1B2QJXD7 temp: 34.9 C
scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Western Digital
model: WD40EZRZ-22GXCB0 size: 3.64 TiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s tech: HDD rpm: 5400 serial: WD-WCC7K3TN1SXX
fw-rev: 0A80 scheme: GPT
ID-3: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST4000VN008-2DR166
size: 3.64 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: HDD rpm: 5980 serial: ZGY8YKN4 fw-rev: SC60 scheme: GPT
ID-4: /dev/sdc maj-min: 8:32 vendor: Seagate model: ST4000VN008-2DR166
size: 3.64 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: HDD rpm: 5980 serial: ZDH9HVA2 fw-rev: SC60 scheme: GPT
ID-5: /dev/sdd maj-min: 8:48 vendor: Samsung model: ST1000LM024 HN-M101MBB
size: 931.51 GiB block-size: physical: 4096 B logical: 512 B type: USB
rev: 3.0 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 tech: HDD rpm: 5400
serial: S30YJ9HF807811 scheme: MBR
ID-6: /dev/sde maj-min: 8:64 vendor: Western Digital
model: WD My Passport 0730 size: 465.73 GiB block-size: physical: 512 B
logical: 512 B type: USB rev: 3.0 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1
tech: N/A serial: 575839314136314136343432 fw-rev: 1016 scheme: MBR
ID-7: /dev/sdf maj-min: 8:80 vendor: Western Digital
model: WD40NDZW-11MR8S1 size: 3.64 TiB block-size: physical: 4096 B
logical: 512 B type: USB rev: 3.1 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1
tech: HDD rpm: 5400 serial: WD-WXB1E993SYP5 fw-rev: 1018 scheme: GPT
Optical-1: /dev/sr0 vendor: Optiarc model: DVD RW AD-7240S rev: 1.00
dev-links: cdrom
Features: speed: 48 multisession: yes audio: yes dvd: yes
rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition:
ID-1: / raw-size: 500 GiB size: 500 GiB (100.00%) used: 14.58 GiB (2.9%)
fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2 label: root_part
uuid: af26f547-9ebd-4513-87f9-195b8953179b
ID-2: /boot/efi raw-size: 500 MiB size: 499.7 MiB (99.95%)
used: 344 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 label: EFI
uuid: CA18-C652
ID-3: /boot/grub2/i386-pc raw-size: 500 GiB size: 500 GiB (100.00%)
used: 14.58 GiB (2.9%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
label: root_part uuid: af26f547-9ebd-4513-87f9-195b8953179b
ID-4: /boot/grub2/x86_64-efi raw-size: 500 GiB size: 500 GiB (100.00%)
used: 14.58 GiB (2.9%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
label: root_part uuid: af26f547-9ebd-4513-87f9-195b8953179b
ID-5: /home raw-size: 500 GiB size: 500 GiB (100.00%)
used: 84.57 GiB (16.9%) fs: btrfs dev: /dev/nvme0n1p3 maj-min: 259:3
label: home uuid: cfd67080-0758-4313-ab04-2b09c1514917
ID-6: /mnt/USB-Bkup raw-size: 3.64 TiB size: 3.58 TiB (98.40%)
used: 2.34 TiB (65.4%) fs: ext4 dev: /dev/sdf1 maj-min: 8:81 label: USB-Bkup
uuid: e5a7bc8d-d7bd-4038-b04d-e3903de0bb14
ID-7: /mnt/md1 raw-size: 3.64 TiB size: 3.58 TiB (98.40%)
used: 1.3 TiB (36.3%) fs: ext4 dev: /dev/md1 maj-min: 9:1 label: md1
uuid: 73c6a49b-e90c-4615-a30c-7c295036a816
ID-8: /mnt/sdd raw-size: 931.51 GiB size: 915.82 GiB (98.31%)
used: 62.56 GiB (6.8%) fs: ext4 dev: /dev/sdd1 maj-min: 8:49 label: N/A
uuid: e09f4e9e-5834-4878-90d4-87b570466c7b
ID-9: /mnt/wd4t raw-size: 3.64 TiB size: 3.58 TiB (98.40%)
used: 1.49 TiB (41.7%) fs: ext4 dev: /dev/sda1 maj-min: 8:1 label: wd4t
uuid: 21bb7fa9-2784-4af1-aad3-730d816e5c60
ID-10: /opt raw-size: 500 GiB size: 500 GiB (100.00%)
used: 14.58 GiB (2.9%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
label: root_part uuid: af26f547-9ebd-4513-87f9-195b8953179b
ID-11: /root raw-size: 500 GiB size: 500 GiB (100.00%)
used: 14.58 GiB (2.9%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
label: root_part uuid: af26f547-9ebd-4513-87f9-195b8953179b
ID-12: /srv raw-size: 500 GiB size: 500 GiB (100.00%)
used: 14.58 GiB (2.9%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
label: root_part uuid: af26f547-9ebd-4513-87f9-195b8953179b
ID-13: /usr/local raw-size: 500 GiB size: 500 GiB (100.00%)
used: 14.58 GiB (2.9%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
label: root_part uuid: af26f547-9ebd-4513-87f9-195b8953179b
ID-14: /var raw-size: 500 GiB size: 500 GiB (100.00%)
used: 14.58 GiB (2.9%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
label: root_part uuid: af26f547-9ebd-4513-87f9-195b8953179b
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/sde1 maj-min: 8:65 size: 465.73 GiB fs: ntfs label: MyPassport
uuid: 9C64D17064D14DA0
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 16 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-2: 1-5:2 info: Alcor Micro USB Hub ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
chip-ID: 058f:6254 class-ID: 0900
Device-1: 1-5.1:4 info: N/A type: keyboard,mouse
driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 100mA chip-ID: 413d:2107 class-ID: 0301
Device-2: 1-6:3 info: ASUSTek USB Audio type: audio,HID
driver: hid-generic,snd-usb-audio,usbhid interfaces: 8 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
chip-ID: 0b05:1a53 class-ID: 0300
Hub-3: 1-7:5 info: ASMedia ASM1074 High-Speed hub ports: 4 rev: 2.1
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
chip-ID: 174c:2074 class-ID: 0900
Hub-4: 1-7.1:7 info: Realtek RTS5411 Hub ports: 4 rev: 2.1
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 0bda:5411
class-ID: 0900
Hub-5: 1-7.1.1:10 info: Realtek RTS5411 Hub ports: 4 rev: 2.1
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 0bda:5411
class-ID: 0900
Hub-6: 1-7.3:9 info: Realtek RTS5411 Hub ports: 4 rev: 2.1
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 0bda:5411
class-ID: 0900
Device-1: 1-7.4:12 info: N/A type: keyboard,mouse
driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 100mA chip-ID: 413d:2107 class-ID: 0301
Hub-7: 1-8:6 info: ASMedia ASM1074 High-Speed hub ports: 4 rev: 2.1
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
chip-ID: 174c:2074 class-ID: 0900
Hub-8: 1-10:8 info: Alcor Micro USB Hub ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
chip-ID: 058f:6254 class-ID: 0900
Device-1: 1-10.1:13 info: Logitech Unifying Receiver
type: keyboard,mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3
rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 98mA
chip-ID: 046d:c52b class-ID: 0300
Device-2: 1-10.4:15 info: Logitech Unifying Receiver
type: keyboard,mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3
rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 98mA
chip-ID: 046d:c52b class-ID: 0300
Device-3: 1-11:11 info: ASUSTek AURA LED Controller type: HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 16mA chip-ID: 0b05:18f3 class-ID: 0300
serial: 9876543210
Device-4: 1-14:14 info: Intel AX211 Bluetooth type: bluetooth
driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
mode: 1.1 power: 100mA chip-ID: 8087:0033 class-ID: e001
Hub-9: 2-0:1 info: super-speed hub ports: 9 rev: 3.1
speed: 20 Gb/s (2.33 GiB/s) lanes: 2 mode: 3.2 gen-2x2 chip-ID: 1d6b:0003
class-ID: 0900
Hub-10: 2-7:2 info: ASMedia ASM1074 SuperSpeed hub ports: 4 rev: 3.0
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 8mA
chip-ID: 174c:3074 class-ID: 0900
Hub-11: 2-7.1:4 info: Realtek Hub ports: 4 rev: 3.1
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 0bda:0411
class-ID: 0900
Hub-12: 2-7.1.1:6 info: Realtek Hub ports: 4 rev: 3.1
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 0bda:0411
class-ID: 0900
Hub-13: 2-7.3:5 info: Realtek Hub ports: 4 rev: 3.1
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 0bda:0411
class-ID: 0900
Device-1: 2-7.3.1:7 info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E
ASM1153 3Gb/s ASM1153E bridge type: mass storage driver: uas interfaces: 1
rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1
chip-ID: 174c:55aa class-ID: 0806 serial: 022010098BAA
Device-2: 2-7.3.2:8 info: Western Digital My Passport Essential (WDBACY)
type: mass storage driver: usb-storage interfaces: 1 rev: 3.0
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 896mA
chip-ID: 1058:0730 class-ID: 0806 serial: 575839314136314136343432
Device-3: 2-7.3.4:9 info: Western Digital Elements 2620 type: mass storage
driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s (596.0 MiB/s)
lanes: 1 mode: 3.2 gen-1x1 power: 896mA chip-ID: 1058:2620 class-ID: 0806
serial: 575842314539393353595035
Hub-14: 2-8:3 info: ASMedia ASM1074 SuperSpeed hub ports: 4 rev: 3.0
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 8mA
chip-ID: 174c:3074 class-ID: 0900
Hub-15: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-16: 4-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-17: 5-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-18: 6-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-19: 7-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-20: 8-0:1 info: super-speed hub ports: 2 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Sensors:
System Temperatures: cpu: 27.0 C mobo: N/A
Fan Speeds (rpm): N/A
Repos:
Packages: pm: rpm pkgs: 4855 libs: 1404 tools: yast,zypper pm: flatpak
pkgs: 0
Active zypp repos in: /etc/zypp/repos.d/NVIDIA:repo-non-free.repo
1: NVIDIA:repo-non-free ~ https://download.nvidia.com/opensuse/tumbleweed
Active zypp repos in: /etc/zypp/repos.d/download.opensuse.org-non-oss.repo
1: download.opensuse.org-non-oss ~ http://download.opensuse.org/tumbleweed/repo/non-oss/
Active zypp repos in: /etc/zypp/repos.d/download.opensuse.org-oss.repo
1: download.opensuse.org-oss ~ http://download.opensuse.org/tumbleweed/repo/oss/
Active zypp repos in: /etc/zypp/repos.d/download.opensuse.org-tumbleweed.repo
1: download.opensuse.org-tumbleweed ~ http://download.opensuse.org/update/tumbleweed/
Active zypp repos in: /etc/zypp/repos.d/ftp.gwdg.de-openSUSE_Tumbleweed.repo
1: ftp.gwdg.de-openSUSE_Tumbleweed ~ http://ftp.gwdg.de/pub/linux/misc/packman/suse/openSUSE_Tumbleweed/
No active zypp repos in: /etc/zypp/repos.d/openSUSE-20240823-0.repo
Active zypp repos in: /etc/zypp/repos.d/openSUSE:repo-non-oss.repo
1: openSUSE:repo-non-oss ~ http://cdn.opensuse.org/tumbleweed/repo/non-oss
Active zypp repos in: /etc/zypp/repos.d/openSUSE:repo-openh264.repo
1: openSUSE:repo-openh264 ~ http://codecs.opensuse.org/openh264/openSUSE_Tumbleweed
No active zypp repos in: /etc/zypp/repos.d/openSUSE:repo-oss-debug.repo
No active zypp repos in: /etc/zypp/repos.d/openSUSE:repo-oss-source.repo
Active zypp repos in: /etc/zypp/repos.d/openSUSE:repo-oss.repo
1: openSUSE:repo-oss ~ http://cdn.opensuse.org/tumbleweed/repo/oss
Active zypp repos in: /etc/zypp/repos.d/openSUSE:update-tumbleweed.repo
1: openSUSE:update-tumbleweed ~ http://cdn.opensuse.org/update/tumbleweed
No active zypp repos in: /etc/zypp/repos.d/repo-debug.repo
Active zypp repos in: /etc/zypp/repos.d/repo-openh264.repo
1: repo-openh264 ~ http://codecs.opensuse.org/openh264/openSUSE_Tumbleweed
No active zypp repos in: /etc/zypp/repos.d/repo-source.repo
Processes:
CPU top: 5 of 591
1: cpu: 300% command: ps pid: 1996569 mem: 3.71 MiB (0.0%)
2: cpu: 6.6% command: firefox pid: 1966059 mem: 545.8 MiB (1.7%)
3: cpu: 6.4% command: thunderbird-bin pid: 1966069 mem: 532.6 MiB (1.6%)
4: cpu: 4.3% command: kwin_x11 pid: 1965443 mem: 225.6 MiB (0.7%)
5: cpu: 3.5% command: Xorg.bin pid: 1964116 mem: 132.2 MiB (0.4%)
Memory top: 5 of 591
1: mem: 600.4 MiB (1.8%) command: plasmashell pid: 1965618 cpu: 1.6%
2: mem: 545.8 MiB (1.7%) command: firefox pid: 1966059 cpu: 6.6%
3: mem: 532.6 MiB (1.6%) command: thunderbird-bin pid: 1966069 cpu: 6.4%
4: mem: 348.1 MiB (1.0%) command: firefox pid: 1966827 cpu: 1.4%
5: mem: 313.2 MiB (0.9%) command: firefox pid: 1967002 cpu: 2.3%
Info:
Processes: 591 Power: uptime: 12h 43m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 1 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 12.4 GiB services: org_kde_powerdevil,
power-profiles-daemon, upowerd Init: systemd v: 256 default: graphical
tool: systemctl
Compilers: gcc: 13.3.1 alt: 14 Shell: Bash v: 5.2.32 running-in: konsole
inxi: 3.3.35
@erbenton Normally with Nvidia GPU’s I add the Kernel boot options fbdev=1 nvidia_drm.modeset=1
So, since your running X11 and not Wayland, do you have an Xorg.conf file for the Nvidia cards?
What does /sbin/modprobe -c nvidia | grep NVreg show?
# /sbin/modprobe -c nvidia | grep NVreg
options nvidia NVreg_DeviceFileUID=0 NVreg_DeviceFileGID=482 NVreg_DeviceFileMode=0660 NVreg_PreserveVideoMemoryAllocations=1
# ls /etc/X11/
xdm xinit xorg.conf.d xorg.conf.install
# ls /etc/X11/*
/etc/X11/xorg.conf.install
/etc/X11/xdm:
xdm-config Xservers
/etc/X11/xinit:
xinitrc.common xinitrc.d
/etc/X11/xorg.conf.d:
00-keyboard.conf
@erbenton I would probably add a /etc/modprobe.d/50-nvidia.conf file and in that file add options nvidia NVreg_DynamicPowerManagement=0x02 and then run dracut -f --regenerate-all
Ref: https://download.nvidia.com/XFree86/Linux-x86_64/550.100/README/powermanagement.html
Always worth a read of everything https://download.nvidia.com/XFree86/Linux-x86_64/550.100/README/installationandconfiguration.html
Else it could be a desktop environment issue… I don’t use the rpms here, generally because they are behind the times…
I will give that a try and report back here in the morning, thanks so much for spending the time to examine this issue
It didnt change anything
@erbenton OK, so if you open a terminal, switch to root user and in that terminal run journalctl -f the adjust your timer down to say one minute. Then when the screens pop back on, check the log output to see what may be triggering the screens not staying off.
ok, so it looks like this is whats causing the wakeup, it starts at just about the time it begins to wakeup:
wplua: [string "alsa.lua"]:182: attempt to concatenate a nil value (local 'node_name')
stack traceback:
[string "alsa.lua"]:182: in function <[string "alsa.lua"]:175>
wplua: [string "alsa.lua"]:182: attempt to concatenate a nil value (local 'node_name')
stack traceback:
[string "alsa.lua"]:182: in function <[string "alsa.lua"]:175>
wplua: [string "alsa.lua"]:182: attempt to concatenate a nil value (local 'node_name')
stack traceback:
[string "alsa.lua"]:182: in function <[string "alsa.lua"]:175>
wplua: [string "alsa.lua"]:182: attempt to concatenate a nil value (local 'node_name')
stack traceback:
[string "alsa.lua"]:182: in function <[string "alsa.lua"]:175>
wplua: [string "alsa.lua"]:182: attempt to concatenate a nil value (local 'node_name')
stack traceback:
[string "alsa.lua"]:182: in function <[string "alsa.lua"]:175>
@erbenton Hmm, that’s gsd-media-keys/wireplumber you have some GNOME applications installed on Plasma?
Or maybe it’s getting confused with multiple audio cards…
I didnt install gnome stuff knowingly, the trouble now is that de-installing wireplumber would automatically delete plasma6-sesion-x11 and patterns-kde-kde
I’ve seen this kind of nonsense a lot over the years. Why should should the entire desktop depend on wireplumber ?
@erbenton It’s likely a wireplumber issue which is the default for Tumbleweed. So I would leave the nvidia settings as they are. But I’m not up with audio foo, hopefully @deano_ferrari and/or @oldcpu can provides some more troubleshooting now.
Ok, thanks for all your help. I feel like we have really narrowed it down. As an experiment i set ExecStart to both services =/bin/true and it reduced the number of wplua errors to just 2. I was hoping that if those could be eliminated the system might stay “screens of” but with the 2 errors they wake right back up.
The two people you mentioned - are they aware we are working on this? If not can you ping them and ask for help?