Hauppage WinTV-HVR-1600

[user]

Hi,
I recently installed a pci ATSC/NTSC TV card: ‘Hauppage WinTV-HVR-1600’
[model # 1199] on my PC which now boots openSUSE 11.1 64 bit with KDE4 &
MS. Windows XP-64 + Vista 64. It works under MS-Windows, and according
to the Hauppage FAQ:

“Can I use the WinTV-HVR-1600 with Linux?
Yes, you can find the latest Linux drivers here:
http://linuxtv.org/hg/v4l-dvb/
Additional information about Linux can be found here:
http://linuxtv.org/v4lwiki/index.php/Main_Page”

Unfortunately, this particular card is not listed in Yast-hardware-tv
for auto-detect. According to the url above, it will use the cx18 driver
which is already built into the kernel.I believe the reason the HVR-1600
is not listed is that the chipsets are made by Conexant and require
firm-ware files that Conexant supplies, but does not want to appear
licensed under GNU open-source. I downloaded these .fw files [with the
Conexant license] which I copied into the /lib/firware directory. I
modprobe cx18, then reboot, then try various “user supplied” card info
in Yast. I can’t get TV-time or Kaffeine, KDE-TV, XawTV, etc. to work.
On TV-time I get “no video source, No signal, cx18:Invalid argument,
Cannot open capture device /dev/video0” on the screen.

Now I’m clueless. Any help or ideas would be greatly appreciated.

I’m not “expert” in Linux, so my command-line use is pretty limited, but
I can follow directions. Anyway, attached is the Hardware Information
from YaST. Thanks.

[user]

============ start debug info ============
libhd version 15.20 (x86-64)
using /var/lib/hardware
kernel version is 2.6
----- /proc/cmdline -----
root=/dev/disk/by-id/ata-SAMSUNG_HD502IJ_S13TJ1NQA03028-part7
resume=/dev/disk/by-id/ata-SAMSUNG_HD502IJ_S13TJ1NQA03028-part6
splash=silent PROFILE=default vga=0x346
----- /proc/cmdline end -----
debug = 0xff7ffff7
probe = 0x0000138fc4aa17fcf9fffe (+memory +pci +isapnp +net +floppy
+misc +misc.serial +misc.par +misc.floppy +serial +cpu +bios +monitor
+mouse +scsi +usb -usb.mods +modem +modem.usb +parallel +parallel.lp
+parallel.zip -isa -isa.isdn +isdn +kbd +prom +sbus +int +braille
+braille.alva +braille.fhp +braille.ht -ignx11 +sys -bios.vbe
-isapnp.old -isapnp.new -isapnp.mod +braille.baum -manual +fb +pppoe
-scan +pcmcia -fork -parallel.imm +s390 -cpuemu -sysfs -s390disks +udev
+block +block.cdrom +block.part +edd +edd.mod -bios.ddc -bios.fb
-bios.mode +input +block.mods +bios.vesa -cpuemu.debug -scsi.noserial
+wlan -bios.crc -hal -bios.vram -bios.acpi -bios.ddc.ports=1
-bios.ddc.ports=2 -bios.ddc.ports=3 -bios.ddc.ports=4 -modules.pata
-net.eeprom -max -lxrc)
shm: attached segment 18841624 at 0x7ff2927a0000
>> hal.1: read hal data
hal: connected to: :1.134
----- hal device list -----
0: udi =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_0_0’
oss.originating_device =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0’
info.subsystem = ‘sound’
oss.card = 0 (0x0)
info.product = ‘ALC883 Analog OSS PCM Device’
info.category = ‘oss’
oss.card_id = ‘HDA ATI SB’
info.udi =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_0_0’
info.capabilities = { ‘oss’, ‘access_control’ }
oss.device_id = ‘ALC883 Analog’
access_control.file = ‘/dev/audio’
oss.type = ‘pcm’
access_control.type = ‘sound’
oss.device = 0 (0x0)
info.callouts.add = { ‘hal-acl-tool --add-device’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:14.2/sound/card0/audio’
info.callouts.remove = { ‘hal-acl-tool --remove-device’ }
info.parent = ‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0’
linux.hotplug_type = 2 (0x2)
oss.device_file = ‘/dev/audio’
linux.subsystem = ‘sound’
linux.device_file = ‘/dev/audio’

1: udi =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_0’
oss.originating_device =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0’
info.subsystem = ‘sound’
oss.card = 0 (0x0)
info.product = ‘ALC883 Analog OSS PCM Device’
info.category = ‘oss’
oss.card_id = ‘HDA ATI SB’
info.udi =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_0’
info.capabilities = { ‘oss’, ‘access_control’ }
oss.device_id = ‘ALC883 Analog’
access_control.file = ‘/dev/dsp’
oss.type = ‘pcm’
access_control.type = ‘sound’
oss.device = 0 (0x0)
info.callouts.add = { ‘hal-acl-tool --add-device’ }
linux.sysfs_path = ‘/sys/devices/pci0000:00/0000:00:14.2/sound/card0/dsp’
info.callouts.remove = { ‘hal-acl-tool --remove-device’ }
info.parent = ‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0’
linux.hotplug_type = 2 (0x2)
oss.device_file = ‘/dev/dsp’
linux.subsystem = ‘sound’
linux.device_file = ‘/dev/dsp’

2: udi =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_1’
oss.originating_device =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0’
info.subsystem = ‘sound’
oss.card = 0 (0x0)
info.product = ‘ALC883 Analog OSS PCM Device’
info.category = ‘oss’
oss.card_id = ‘HDA ATI SB’
info.udi =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_pcm_1’
info.capabilities = { ‘oss’, ‘access_control’ }
oss.device_id = ‘ALC883 Analog’
access_control.file = ‘/dev/adsp’
oss.type = ‘pcm’
access_control.type = ‘sound’
oss.device = 1 (0x1)
info.callouts.add = { ‘hal-acl-tool --add-device’ }
linux.sysfs_path = ‘/sys/devices/pci0000:00/0000:00:14.2/sound/card0/adsp’
info.callouts.remove = { ‘hal-acl-tool --remove-device’ }
info.parent = ‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0’
linux.hotplug_type = 2 (0x2)
oss.device_file = ‘/dev/adsp’
linux.subsystem = ‘sound’
linux.device_file = ‘/dev/adsp’

3: udi =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_mixer__1’
oss.originating_device =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0’
info.subsystem = ‘sound’
oss.card = 0 (0x0)
info.product = ‘ALC883 Analog OSS Control Device’
info.category = ‘oss’
oss.card_id = ‘HDA ATI SB’
info.udi =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_oss_mixer__1’
info.capabilities = { ‘oss’, ‘access_control’ }
oss.device_id = ‘ALC883 Analog’
access_control.file = ‘/dev/mixer’
oss.type = ‘mixer’
access_control.type = ‘sound’
info.callouts.add = { ‘hal-acl-tool --add-device’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:14.2/sound/card0/mixer’
info.callouts.remove = { ‘hal-acl-tool --remove-device’ }
info.parent = ‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0’
linux.hotplug_type = 2 (0x2)
oss.device_file = ‘/dev/mixer’
linux.subsystem = ‘sound’
linux.device_file = ‘/dev/mixer’

4: udi = ‘/org/freedesktop/Hal/devices/computer_alsa_sequencer’
info.subsystem = ‘sound’
info.product = ‘ALSA Sequencer Device’
info.category = ‘alsa’
alsa.type = ‘sequencer’
info.udi = ‘/org/freedesktop/Hal/devices/computer_alsa_sequencer’
info.capabilities = { ‘alsa’, ‘access_control’ }
access_control.file = ‘/dev/snd/seq’
access_control.type = ‘sound’
info.callouts.add = { ‘hal-acl-tool --add-device’ }
linux.sysfs_path = ‘/sys/devices/virtual/sound/seq’
info.callouts.remove = { ‘hal-acl-tool --remove-device’ }
info.parent = ‘/org/freedesktop/Hal/devices/computer’
linux.hotplug_type = 2 (0x2)
alsa.device_file = ‘/dev/snd/seq’
linux.subsystem = ‘sound’
linux.device_file = ‘/dev/snd/seq’

5: udi = ‘/org/freedesktop/Hal/devices/pci_14f1_5b7a_video4linux_1’
info.subsystem = ‘video4linux’
info.product = ‘Hauppauge HVR-1600’
info.category = ‘video4linux’
info.udi = ‘/org/freedesktop/Hal/devices/pci_14f1_5b7a_video4linux_1’
info.capabilities = { ‘video4linux’, ‘video4linux.video_capture’,
‘video4linux.audio’, ‘video4linux.tuner’, ‘access_control’ }
access_control.file = ‘/dev/video24’
access_control.type = ‘video4linux’
info.callouts.add = { ‘hal-acl-tool --add-device’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:14.4/0000:02:06.0/video4linux/video24’
info.callouts.remove = { ‘hal-acl-tool --remove-device’ }
info.parent = ‘/org/freedesktop/Hal/devices/pci_14f1_5b7a’
video4linux.device = ‘/dev/video24’
linux.hotplug_type = 2 (0x2)
video4linux.version = ‘2’
linux.subsystem = ‘video4linux’
linux.device_file = ‘/dev/video24’

6: udi = ‘/org/freedesktop/Hal/devices/pci_14f1_5b7a_video4linux_0’
info.subsystem = ‘video4linux’
info.product = ‘Hauppauge HVR-1600’
info.category = ‘video4linux’
info.udi = ‘/org/freedesktop/Hal/devices/pci_14f1_5b7a_video4linux_0’
info.capabilities = { ‘video4linux’, ‘video4linux.video_capture’,
‘video4linux.audio’, ‘video4linux.tuner’, ‘access_control’ }
access_control.file = ‘/dev/video0’
access_control.type = ‘video4linux’
info.callouts.add = { ‘hal-acl-tool --add-device’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:14.4/0000:02:06.0/video4linux/video0’
info.callouts.remove = { ‘hal-acl-tool --remove-device’ }
info.parent = ‘/org/freedesktop/Hal/devices/pci_14f1_5b7a’
video4linux.device = ‘/dev/video0’
linux.hotplug_type = 2 (0x2)
video4linux.version = ‘2’
linux.subsystem = ‘video4linux’
linux.device_file = ‘/dev/video0’

7: udi = ‘/org/freedesktop/Hal/devices/pci_14f1_5b7a_video4linux’
info.subsystem = ‘video4linux’
info.product = ‘Hauppauge HVR-1600’
info.category = ‘video4linux’
info.udi = ‘/org/freedesktop/Hal/devices/pci_14f1_5b7a_video4linux’
info.capabilities = { ‘video4linux’, ‘video4linux.video_capture’,
‘video4linux.audio’, ‘video4linux.tuner’, ‘access_control’ }
access_control.file = ‘/dev/video32’
access_control.type = ‘video4linux’
info.callouts.add = { ‘hal-acl-tool --add-device’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:14.4/0000:02:06.0/video4linux/video32’
info.callouts.remove = { ‘hal-acl-tool --remove-device’ }
info.parent = ‘/org/freedesktop/Hal/devices/pci_14f1_5b7a’
video4linux.device = ‘/dev/video32’
linux.hotplug_type = 2 (0x2)
video4linux.version = ‘2’
linux.subsystem = ‘video4linux’
linux.device_file = ‘/dev/video32’

8: udi = ‘/org/freedesktop/Hal/devices/volume_part3_size_1024’
info.product = ‘Volume’
block.device = ‘/dev/sda3’
info.udi = ‘/org/freedesktop/Hal/devices/volume_part3_size_1024’
block.major = 8 (0x8)
block.minor = 3 (0x3)
linux.hotplug_type = 3 (0x3)
block.is_volume = true
block.storage_device =
‘/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD502IJS13TJ1NQA03028’
info.category = ‘volume’
info.capabilities = { ‘volume’, ‘block’ }
volume.fstype = ‘’
volume.fsusage = ‘partitiontable’
volume.fsversion = ‘’
volume.uuid = ‘’
volume.label = ‘’
volume.mount_point = ‘’
volume.is_mounted = false
volume.is_mounted_read_only = false
volume.linux.is_device_mapper = false
volume.is_disc = false
volume.is_partition = true
volume.partition.scheme = ‘mbr’
volume.partition.number = 3 (0x3)
volume.partition.type = ‘0x0f’
volume.block_size = 512 (0x200)
volume.partition.label = ‘’
volume.num_blocks = 2ull (0x2ull)
volume.partition.uuid = ‘’
volume.size = 1024ull (0x400ull)
volume.partition.flags = { ‘boot’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0/block/sda/sda3’
volume.partition.start = 74447009280ull (0x1155633600ull)
info.parent =
‘/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD502IJS13TJ1NQA03028’
volume.partition.media_size = 500107862016ull (0x7470c06000ull)

9: udi =
‘/org/freedesktop/Hal/devices/volume_uuid_11402437_3594_4075_b3f1_25d8fd575317’
info.product = ‘Volume (ext3)’
block.device = ‘/dev/sda8’
info.udi =
‘/org/freedesktop/Hal/devices/volume_uuid_11402437_3594_4075_b3f1_25d8fd575317’
block.major = 8 (0x8)
block.minor = 8 (0x8)
linux.hotplug_type = 3 (0x3)
block.is_volume = true
block.storage_device =
‘/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD502IJS13TJ1NQA03028’
org.freedesktop.Hal.Device.Volume.method_names = { ‘Mount’, ‘Unmount’,
‘Eject’ }
org.freedesktop.Hal.Device.Volume.method_signatures = { ‘ssas’, ‘as’,
‘as’ }
info.interfaces = { ‘org.freedesktop.Hal.Device.Volume’ }
org.freedesktop.Hal.Device.Volume.method_argnames = { ‘mount_point
fstype extra_options’, ‘extra_options’, ‘extra_options’ }
info.category = ‘volume’
org.freedesktop.Hal.Device.Volume.method_execpaths = {
‘hal-storage-mount’, ‘hal-storage-unmount’, ‘hal-storage-eject’ }
info.capabilities = { ‘volume’, ‘block’ }
volume.mount.valid_options = { ‘ro’, ‘sync’, ‘dirsync’, ‘noatime’,
‘nodiratime’, ‘noexec’, ‘quiet’, ‘remount’, ‘exec’, ‘acl’, ‘user_xattr’,
‘data=’ }
volume.fstype = ‘ext3’
volume.fsusage = ‘filesystem’
volume.fsversion = ‘1.0’
volume.uuid = ‘11402437-3594-4075-b3f1-25d8fd575317’
volume.ignore = false
volume.label = ‘’
volume.mount_point = ‘/home’
volume.unmount.valid_options = { ‘lazy’ }
volume.is_mounted = true
volume.is_mounted_read_only = false
volume.linux.is_device_mapper = false
volume.is_disc = false
volume.is_partition = true
volume.partition.number = 8 (0x8)
volume.block_size = 512 (0x200)
volume.num_blocks = 316673217ull (0x12e00cc1ull)
volume.size = 162136687104ull (0x25c0198200ull)
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0/block/sda/sda8’
volume.partition.start = 281584267776ull (0x418fbaf200ull)
info.parent =
‘/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD502IJS13TJ1NQA03028’
volume.partition.media_size = 500107862016ull (0x7470c06000ull)

10: udi =
‘/org/freedesktop/Hal/devices/volume_uuid_96f80fac_d5ad_4ed8_b8fc_7cf7c4016bce’
info.product = ‘Volume (ext3)’
block.device = ‘/dev/sda7’
info.udi =
‘/org/freedesktop/Hal/devices/volume_uuid_96f80fac_d5ad_4ed8_b8fc_7cf7c4016bce’
block.major = 8 (0x8)
block.minor = 7 (0x7)
linux.hotplug_type = 3 (0x3)
block.is_volume = true
block.storage_device =
‘/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD502IJS13TJ1NQA03028’
org.freedesktop.Hal.Device.Volume.method_names = { ‘Mount’, ‘Unmount’,
‘Eject’ }
org.freedesktop.Hal.Device.Volume.method_signatures = { ‘ssas’, ‘as’,
‘as’ }
info.interfaces = { ‘org.freedesktop.Hal.Device.Volume’ }
org.freedesktop.Hal.Device.Volume.method_argnames = { ‘mount_point
fstype extra_options’, ‘extra_options’, ‘extra_options’ }
info.category = ‘volume’
org.freedesktop.Hal.Device.Volume.method_execpaths = {
‘hal-storage-mount’, ‘hal-storage-unmount’, ‘hal-storage-eject’ }
info.capabilities = { ‘volume’, ‘block’ }
volume.mount.valid_options = { ‘ro’, ‘sync’, ‘dirsync’, ‘noatime’,
‘nodiratime’, ‘noexec’, ‘quiet’, ‘remount’, ‘exec’, ‘acl’, ‘user_xattr’,
‘data=’ }
volume.fstype = ‘ext3’
volume.fsusage = ‘filesystem’
volume.fsversion = ‘1.0’
volume.uuid = ‘96f80fac-d5ad-4ed8-b8fc-7cf7c4016bce’
volume.ignore = false
volume.label = ‘’
volume.mount_point = ‘/’
volume.unmount.valid_options = { ‘lazy’ }
volume.is_mounted = true
volume.is_mounted_read_only = false
volume.linux.is_device_mapper = false
volume.is_disc = false
volume.is_partition = true
volume.partition.number = 7 (0x7)
volume.block_size = 512 (0x200)
volume.num_blocks = 41945652ull (0x2800a34ull)
volume.size = 21476173824ull (0x500146800ull)
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0/block/sda/sda7’
volume.partition.start = 260108061696ull (0x3c8fa60c00ull)
info.parent =
‘/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD502IJS13TJ1NQA03028’
volume.partition.media_size = 500107862016ull (0x7470c06000ull)

11: udi = ‘/org/freedesktop/Hal/devices/storage_model_DVD_RW_DRU_180A’
storage.cdrom.dvdrw = true
storage.cdrom.dvdrdl = true
storage.cdrom.dvdram = true
storage.cdrom.dvdplusr = true
storage.cdrom.write_speeds = { ‘8468’, ‘7057’, ‘5645’, ‘4234’, ‘2823’,
‘1412’ }
info.product = ‘DVD RW DRU-180A’
storage.cdrom.dvdplusrw = true
info.vendor = ‘SONY’
block.device = ‘/dev/sr0’
storage.cdrom.dvdplusrwdl = false
info.udi = ‘/org/freedesktop/Hal/devices/storage_model_DVD_RW_DRU_180A’
block.major = 11 (0xb)
storage.cdrom.dvdplusrdl = true
block.minor = 0 (0x0)
storage.cdrom.bd = false
linux.hotplug_type = 3 (0x3)
block.is_volume = false
storage.cdrom.bdr = false
block.storage_device =
‘/org/freedesktop/Hal/devices/storage_model_DVD_RW_DRU_180A’
storage.bus = ‘pci’
storage.cdrom.bdre = false
storage.no_partitions_hint = true
storage.cdrom.hddvd = false
storage.media_check_enabled = true
storage.cdrom.hddvdr = false
info.interfaces = { ‘org.freedesktop.Hal.Device.Storage’,
‘org.freedesktop.Hal.Device.Storage’,
‘org.freedesktop.Hal.Device.Storage.Removable’ }
storage.automount_enabled_hint = true
info.category = ‘storage’
storage.cdrom.hddvdrw = false
info.capabilities = { ‘storage’, ‘block’, ‘storage.cdrom’,
‘access_control’, ‘access_control’ }
storage.drive_type = ‘cdrom’
storage.cdrom.mo = false
storage.model = ‘DVD RW DRU-180A’
storage.cdrom.mrw = true
storage.removable.media_size = 2048ull (0x800ull)
storage.vendor = ‘SONY’
storage.cdrom.mrw_w = true
storage.partitioning_scheme = ‘’
storage.cdrom.support_media_changed = true
storage.cdrom.support_multisession = true
storage.lun = 0 (0x0)
storage.cdrom.read_speed = 8468 (0x2114)
storage.originating_device = ‘/org/freedesktop/Hal/devices/computer’
storage.cdrom.write_speed = 8468 (0x2114)
storage.removable.media_available = false
storage.removable = true
storage.size = 0ull (0x0ull)
storage.hotpluggable = false
org.freedesktop.Hal.Device.Storage.method_names = { ‘Eject’, ‘CloseTray’ }
storage.requires_eject = true
org.freedesktop.Hal.Device.Storage.method_signatures = { ‘as’, ‘as’ }
org.freedesktop.Hal.Device.Storage.method_argnames = {
‘extra_options’, ‘extra_options’ }
storage.removable.support_async_notification = false
org.freedesktop.Hal.Device.Storage.method_execpaths = {
‘hal-storage-eject’, ‘hal-storage-closetray’ }
access_control.file = ‘/dev/sr0’
access_control.type = ‘cdrom’
info.callouts.add = { ‘hal-acl-tool --add-device’ }
info.callouts.remove = { ‘hal-acl-tool --remove-device’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:14.1/host4/target4:0:0/4:0:0:0/block/sr0’
info.addons = { ‘hald-addon-storage’ }
info.parent =
‘/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_device_lun0’
storage.cdrom.cdr = true
storage.cdrom.cdrw = true
storage.cdrom.dvd = true
storage.cdrom.dvdr = true

12: udi = ‘/org/freedesktop/Hal/devices/volume_uuid_660061A0006177C7’
info.product = ‘Storage’
block.device = ‘/dev/sda5’
info.udi = ‘/org/freedesktop/Hal/devices/volume_uuid_660061A0006177C7’
block.major = 8 (0x8)
block.minor = 5 (0x5)
linux.hotplug_type = 3 (0x3)
block.is_volume = true
block.storage_device =
‘/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD502IJS13TJ1NQA03028’
org.freedesktop.Hal.Device.Volume.method_names = { ‘Mount’, ‘Unmount’,
‘Eject’ }
org.freedesktop.Hal.Device.Volume.method_signatures = { ‘ssas’, ‘as’,
‘as’ }
info.interfaces = { ‘org.freedesktop.Hal.Device.Volume’ }
org.freedesktop.Hal.Device.Volume.method_argnames = { ‘mount_point
fstype extra_options’, ‘extra_options’, ‘extra_options’ }
info.category = ‘volume’
org.freedesktop.Hal.Device.Volume.method_execpaths = {
‘hal-storage-mount’, ‘hal-storage-unmount’, ‘hal-storage-eject’ }
info.capabilities = { ‘volume’, ‘block’ }
volume.mount.valid_options = { ‘ro’, ‘sync’, ‘dirsync’, ‘noatime’,
‘nodiratime’, ‘noexec’, ‘quiet’, ‘remount’, ‘exec’, ‘uid=’, ‘gid=’,
‘umask=’, ‘utf8’, ‘locale=’ }
volume.fstype = ‘ntfs-3g’
volume.fsusage = ‘filesystem’
volume.fsversion = ‘3.1’
volume.uuid = ‘660061A0006177C7’
volume.ignore = false
volume.label = ‘Storage’
volume.mount_point = ‘/windows/E’
volume.unmount.valid_options = { ‘lazy’ }
volume.is_mounted = true
volume.policy.mount_filesystem = ‘ntfs-3g’
volume.is_mounted_read_only = false
volume.linux.is_device_mapper = false
volume.is_disc = false
volume.is_partition = true
volume.partition.number = 5 (0x5)
volume.block_size = 512 (0x200)
volume.num_blocks = 358410087ull (0x155ce767ull)
volume.size = 183505964544ull (0x2ab9cece00ull)
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0/block/sda/sda5’
volume.partition.start = 74447041536ull (0x115563b400ull)
info.parent =
‘/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD502IJS13TJ1NQA03028’
volume.partition.media_size = 500107862016ull (0x7470c06000ull)

13: udi =
‘/org/freedesktop/Hal/devices/volume_uuid_da5419b4_3301_45ca_96b7_8d4d4a0c1c4e’
volume.fstype = ‘swap’
volume.partition.number = 6 (0x6)
volume.fsusage = ‘other’
info.product = ‘Volume (swap)’
volume.block_size = 512 (0x200)
volume.fsversion = ‘2’
info.category = ‘volume’
volume.num_blocks = 4208967ull (0x403947ull)
info.udi =
‘/org/freedesktop/Hal/devices/volume_uuid_da5419b4_3301_45ca_96b7_8d4d4a0c1c4e’
block.device = ‘/dev/sda6’
block.storage_device =
‘/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD502IJS13TJ1NQA03028’
volume.uuid = ‘da5419b4-3301-45ca-96b7-8d4d4a0c1c4e’
info.capabilities = { ‘volume’, ‘block’ }
volume.size = 2154991104ull (0x80728e00ull)
block.major = 8 (0x8)
volume.label = ‘’
volume.partition.start = 257953038336ull (0x3c0f330000ull)
block.minor = 6 (0x6)
volume.mount_point = ‘’
volume.partition.media_size = 500107862016ull (0x7470c06000ull)
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0/block/sda/sda6’
block.is_volume = true
volume.is_mounted = false
info.parent =
‘/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD502IJS13TJ1NQA03028’
volume.is_mounted_read_only = false
volume.linux.is_device_mapper = false
linux.hotplug_type = 3 (0x3)
volume.is_disc = false
volume.is_partition = true

14: udi = ‘/org/freedesktop/Hal/devices/volume_uuid_C880EB8C80EB7F76’
info.product = ‘VISTA-SYSTEM’
block.device = ‘/dev/sda2’
info.udi = ‘/org/freedesktop/Hal/devices/volume_uuid_C880EB8C80EB7F76’
block.major = 8 (0x8)
block.minor = 2 (0x2)
linux.hotplug_type = 3 (0x3)
block.is_volume = true
block.storage_device =
‘/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD502IJS13TJ1NQA03028’
org.freedesktop.Hal.Device.Volume.method_names = { ‘Mount’, ‘Unmount’,
‘Eject’ }
org.freedesktop.Hal.Device.Volume.method_signatures = { ‘ssas’, ‘as’,
‘as’ }
info.interfaces = { ‘org.freedesktop.Hal.Device.Volume’ }
org.freedesktop.Hal.Device.Volume.method_argnames = { ‘mount_point
fstype extra_options’, ‘extra_options’, ‘extra_options’ }
info.category = ‘volume’
org.freedesktop.Hal.Device.Volume.method_execpaths = {
‘hal-storage-mount’, ‘hal-storage-unmount’, ‘hal-storage-eject’ }
info.capabilities = { ‘volume’, ‘block’ }
volume.mount.valid_options = { ‘ro’, ‘sync’, ‘dirsync’, ‘noatime’,
‘nodiratime’, ‘noexec’, ‘quiet’, ‘remount’, ‘exec’, ‘uid=’, ‘gid=’,
‘umask=’, ‘utf8’, ‘locale=’ }
volume.fstype = ‘ntfs-3g’
volume.fsusage = ‘filesystem’
volume.fsversion = ‘3.1’
volume.uuid = ‘C880EB8C80EB7F76’
volume.ignore = false
volume.label = ‘VISTA-SYSTEM’
volume.mount_point = ‘/windows/D’
volume.unmount.valid_options = { ‘lazy’ }
volume.is_mounted = true
volume.policy.mount_filesystem = ‘ntfs-3g’
volume.is_mounted_read_only = false
volume.linux.is_device_mapper = false
volume.is_disc = false
volume.is_partition = true
volume.partition.number = 2 (0x2)
volume.block_size = 512 (0x200)
volume.num_blocks = 83971755ull (0x5014eabull)
volume.size = 42993538560ull (0xa029d5600ull)
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0/block/sda/sda2’
volume.partition.start = 31453470720ull (0x752c5e000ull)
info.parent =
‘/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD502IJS13TJ1NQA03028’
volume.partition.media_size = 500107862016ull (0x7470c06000ull)

15: udi = ‘/org/freedesktop/Hal/devices/volume_uuid_9CC0345CC0343EB8’
info.product = ‘XP64-SYSTEM’
block.device = ‘/dev/sda1’
info.udi = ‘/org/freedesktop/Hal/devices/volume_uuid_9CC0345CC0343EB8’
block.major = 8 (0x8)
block.minor = 1 (0x1)
linux.hotplug_type = 3 (0x3)
block.is_volume = true
block.storage_device =
‘/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD502IJS13TJ1NQA03028’
org.freedesktop.Hal.Device.Volume.method_names = { ‘Mount’, ‘Unmount’,
‘Eject’ }
org.freedesktop.Hal.Device.Volume.method_signatures = { ‘ssas’, ‘as’,
‘as’ }
info.interfaces = { ‘org.freedesktop.Hal.Device.Volume’ }
org.freedesktop.Hal.Device.Volume.method_argnames = { ‘mount_point
fstype extra_options’, ‘extra_options’, ‘extra_options’ }
info.category = ‘volume’
org.freedesktop.Hal.Device.Volume.method_execpaths = {
‘hal-storage-mount’, ‘hal-storage-unmount’, ‘hal-storage-eject’ }
info.capabilities = { ‘volume’, ‘block’ }
volume.mount.valid_options = { ‘ro’, ‘sync’, ‘dirsync’, ‘noatime’,
‘nodiratime’, ‘noexec’, ‘quiet’, ‘remount’, ‘exec’, ‘uid=’, ‘gid=’,
‘umask=’, ‘utf8’, ‘locale=’ }
volume.fstype = ‘ntfs-3g’
volume.fsusage = ‘filesystem’
volume.fsversion = ‘3.1’
volume.uuid = ‘9CC0345CC0343EB8’
volume.ignore = false
volume.label = ‘XP64-SYSTEM’
volume.mount_point = ‘/windows/C’
volume.unmount.valid_options = { ‘lazy’ }
volume.is_mounted = true
volume.policy.mount_filesystem = ‘ntfs-3g’
volume.is_mounted_read_only = false
volume.linux.is_device_mapper = false
volume.is_disc = false
volume.is_partition = true
volume.partition.number = 1 (0x1)
volume.block_size = 512 (0x200)
volume.num_blocks = 61416488ull (0x3a92428ull)
volume.size = 31445241856ull (0x752485000ull)
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0/block/sda/sda1’
volume.partition.start = 8228864ull (0x7d9000ull)
info.parent =
‘/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD502IJS13TJ1NQA03028’
volume.partition.media_size = 500107862016ull (0x7470c06000ull)

16: udi = ‘/org/freedesktop/Hal/devices/computer’
info.callouts.session_add = { ‘hal-acl-tool --reconfigure’ }
info.callouts.session_remove = { ‘hal-acl-tool --reconfigure’ }
info.callouts.session_active = { ‘hal-acl-tool --reconfigure’ }
info.subsystem = ‘unknown’
info.callouts.session_inactive = { ‘hal-acl-tool --reconfigure’ }
info.product = ‘Computer’
info.udi = ‘/org/freedesktop/Hal/devices/computer’
system.kernel.name = ‘Linux’
system.kernel.version = ‘2.6.27.7-9-default’
system.kernel.machine = ‘x86_64’
power_management.can_suspend = true
power_management.can_suspend_hybrid = true
power_management.can_hibernate = true
info.interfaces = { ‘org.freedesktop.Hal.Device.SystemPowerManagement’ }
system.hardware.primary_video.vendor = 4318 (0x10de)
system.hardware.primary_video.product = 1057 (0x421)
system.hardware.serial = ‘System Serial Number’
system.hardware.uuid = ‘203DD61B-150D-DD11-892A-001FC6BFFC53’
system.board.serial = ‘MB-1234567890’
system.firmware.vendor = ‘American Megatrends Inc.’
system.firmware.version = ‘1001’
system.firmware.release_date = ‘07/01/2008’
system.hardware.vendor = ‘System manufacturer’
system.hardware.product = ‘System Product Name’
system.hardware.version = ‘System Version’
system.chassis.manufacturer = ‘Chassis Manufacture’
system.board.product = ‘M3A’
system.board.version = ‘Rev 1.xx’
system.board.vendor = ‘ASUSTeK Computer INC.’
system.chassis.type = ‘Desktop’
power_management.type = ‘acpi’
system.formfactor = ‘desktop’
power_management.acpi.linux.version = ‘20080609’
info.callouts.add = { ‘hal-acl-tool --remove-all’,
‘hal-storage-cleanup-all-mountpoints’ }
power_management.quirk.vbe_post = true
info.addons = { ‘hald-addon-cpufreq’, ‘hald-addon-acpi’ }
org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {
‘Suspend’, ‘SuspendHybrid’, ‘Hibernate’, ‘Shutdown’, ‘Reboot’,
‘SetPowerSave’ }
org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {
‘i’, ‘i’, ‘’, ‘’, ‘’, ‘b’ }
org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {
‘num_seconds_to_sleep’, ‘num_seconds_to_sleep’, ‘’, ‘’, ‘’,
‘enable_power_save’ }
org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {
‘hal-system-power-suspend’, ‘hal-system-power-suspend-hybrid’,
‘hal-system-power-hibernate’, ‘hal-system-power-shutdown’,
‘hal-system-power-reboot’, ‘hal-system-power-set-power-save’ }
power_management.is_powersave_set = false

17: udi =
‘/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD502IJS13TJ1NQA03028’
storage.drive_type = ‘disk’
storage.requires_eject = false
storage.model = ‘SAMSUNG HD502IJ’
info.product = ‘SAMSUNG HD502IJ’
storage.vendor = ‘ATA’
info.category = ‘storage’
info.udi =
‘/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD502IJS13TJ1NQA03028’
block.device = ‘/dev/sda’
storage.serial = ‘SATA_SAMSUNG_HD502IJS13TJ1NQA03028’
info.capabilities = { ‘storage’, ‘block’ }
block.storage_device =
‘/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD502IJS13TJ1NQA03028’
block.major = 8 (0x8)
storage.firmware_version = ‘1AA0’
block.minor = 0 (0x0)
storage.lun = 0 (0x0)
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0/block/sda’
block.is_volume = false
storage.originating_device = ‘/org/freedesktop/Hal/devices/computer’
info.vendor = ‘ATA’
info.parent =
‘/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_scsi_device_lun0’
storage.bus = ‘pci’
storage.removable.media_available = true
storage.no_partitions_hint = false
storage.removable = false
linux.hotplug_type = 3 (0x3)
storage.media_check_enabled = false
storage.size = 500107862016ull (0x7470c06000ull)
storage.removable.media_size = 500107862016ull (0x7470c06000ull)
storage.automount_enabled_hint = true
storage.hotpluggable = false
storage.partitioning_scheme = ‘mbr’

18: udi =
‘/org/freedesktop/Hal/devices/platform_floppy_0_storage_platform_floppy’
info.product = ‘PC Floppy Drive’
info.vendor = ‘’
block.device = ‘/dev/fd0’
info.udi =
‘/org/freedesktop/Hal/devices/platform_floppy_0_storage_platform_floppy’
block.major = 2 (0x2)
block.minor = 0 (0x0)
linux.hotplug_type = 3 (0x3)
block.is_volume = false
block.storage_device =
‘/org/freedesktop/Hal/devices/platform_floppy_0_storage_platform_floppy’
storage.bus = ‘platform’
org.freedesktop.Hal.Device.Volume.method_names = { ‘Mount’, ‘Unmount’,
‘Eject’ }
storage.no_partitions_hint = true
org.freedesktop.Hal.Device.Volume.method_signatures = { ‘ssas’, ‘as’,
‘as’ }
storage.media_check_enabled = false
info.interfaces = { ‘org.freedesktop.Hal.Device.Volume’,
‘org.freedesktop.Hal.Device.Storage.Removable’ }
org.freedesktop.Hal.Device.Volume.method_argnames = { ‘mount_point
fstype extra_options’, ‘extra_options’, ‘extra_options’ }
storage.automount_enabled_hint = true
info.category = ‘storage’
org.freedesktop.Hal.Device.Volume.method_execpaths = {
‘hal-storage-mount’, ‘hal-storage-unmount’, ‘hal-storage-eject’ }
info.capabilities = { ‘storage’, ‘block’, ‘access_control’ }
storage.drive_type = ‘floppy’
volume.mount.valid_options = { ‘ro’, ‘sync’, ‘dirsync’, ‘noatime’,
‘nodiratime’, ‘noexec’, ‘quiet’, ‘remount’, ‘exec’, ‘utf8’,
‘shortname=’, ‘codepage=’, ‘iocharset=’, ‘umask=’, ‘uid=’ }
storage.model = ‘’
storage.vendor = ‘PC Floppy Drive’
storage.originating_device =
‘/org/freedesktop/Hal/devices/platform_floppy_0’
storage.removable.media_available = false
storage.removable = true
storage.size = 0ull (0x0ull)
storage.hotpluggable = false
storage.requires_eject = false
access_control.file = ‘/dev/fd0’
access_control.type = ‘removable-block’
info.callouts.add = { ‘hal-acl-tool --add-device’ }
info.callouts.remove = { ‘hal-acl-tool --remove-device’ }
linux.sysfs_path = ‘/sys/devices/platform/floppy.0/block/fd0’
info.addons = { ‘hald-addon-storage’ }
info.parent = ‘/org/freedesktop/Hal/devices/platform_floppy_0’

19: udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0’
info.subsystem = ‘tty’
info.product = ‘16550A-compatible COM port’
info.category = ‘serial’
info.udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0’
info.capabilities = { ‘serial’, ‘access_control’ }
access_control.file = ‘/dev/ttyS0’
serial.originating_device = ‘/org/freedesktop/Hal/devices/pnp_PNP0501’
access_control.type = ‘modem’
serial.device = ‘/dev/ttyS0’
info.callouts.add = { ‘hal-acl-tool --add-device’ }
linux.sysfs_path = ‘/sys/devices/pnp0/00:0b/tty/ttyS0’
serial.port = 0 (0x0)
info.callouts.remove = { ‘hal-acl-tool --remove-device’ }
info.parent = ‘/org/freedesktop/Hal/devices/pnp_PNP0501’
serial.type = ‘platform’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘tty’
linux.device_file = ‘/dev/ttyS0’

20: udi = ‘/org/freedesktop/Hal/devices/computer_alsa_timer’
info.subsystem = ‘sound’
info.product = ‘ALSA Timer Device’
info.category = ‘alsa’
alsa.type = ‘timer’
info.udi = ‘/org/freedesktop/Hal/devices/computer_alsa_timer’
info.capabilities = { ‘alsa’, ‘access_control’ }
access_control.file = ‘/dev/snd/timer’
access_control.type = ‘sound’
info.callouts.add = { ‘hal-acl-tool --add-device’ }
linux.sysfs_path = ‘/sys/devices/virtual/sound/timer’
info.callouts.remove = { ‘hal-acl-tool --remove-device’ }
info.parent = ‘/org/freedesktop/Hal/devices/computer’
linux.hotplug_type = 2 (0x2)
alsa.device_file = ‘/dev/snd/timer’
linux.subsystem = ‘sound’
linux.device_file = ‘/dev/snd/timer’

21: udi =
‘/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input’
info.subsystem = ‘input’
info.product = ‘ImExPS/2 Logitech Explorer Mouse’
info.category = ‘input’
info.udi =
‘/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input’
info.capabilities = { ‘input’, ‘input.mouse’, ‘access_control’ }
input.x11_driver = ‘evdev’
access_control.file = ‘/dev/input/event1’
access_control.type = ‘mouse’
info.callouts.add = { ‘hal-acl-tool --add-device’ }
linux.sysfs_path =
‘/sys/devices/platform/i8042/serio1/input/input1/event1’
info.callouts.remove = { ‘hal-acl-tool --remove-device’ }
info.parent = ‘/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port’
input.originating_device =
‘/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port’
input.device = ‘/dev/input/event1’
linux.hotplug_type = 2 (0x2)
input.product = ‘ImExPS/2 Logitech Explorer Mouse’
linux.subsystem = ‘input’
linux.device_file = ‘/dev/input/event1’

22: udi = ‘/org/freedesktop/Hal/devices/pci_14f1_5b7a_dvb_2’
info.subsystem = ‘dvb’
info.product = ‘DVB Device’
info.category = ‘dvb’
info.udi = ‘/org/freedesktop/Hal/devices/pci_14f1_5b7a_dvb_2’
info.capabilities = { ‘dvb’, ‘access_control’ }
access_control.file = ‘/dev/dvb/adapter0/net0’
access_control.type = ‘dvb’
info.callouts.add = { ‘hal-acl-tool --add-device’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:14.4/0000:02:06.0/dvb/dvb0.net0’
info.callouts.remove = { ‘hal-acl-tool --remove-device’ }
info.parent = ‘/org/freedesktop/Hal/devices/pci_14f1_5b7a’
dvb.device = ‘/dev/dvb/adapter0/net0’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘dvb’
linux.device_file = ‘/dev/dvb/adapter0/net0’

23: udi = ‘/org/freedesktop/Hal/devices/pci_14f1_5b7a_dvb_1’
info.subsystem = ‘dvb’
info.product = ‘DVB Device’
info.category = ‘dvb’
info.udi = ‘/org/freedesktop/Hal/devices/pci_14f1_5b7a_dvb_1’
info.capabilities = { ‘dvb’, ‘access_control’ }
access_control.file = ‘/dev/dvb/adapter0/frontend0’
access_control.type = ‘dvb’
info.callouts.add = { ‘hal-acl-tool --add-device’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:14.4/0000:02:06.0/dvb/dvb0.frontend0’
info.callouts.remove = { ‘hal-acl-tool --remove-device’ }
info.parent = ‘/org/freedesktop/Hal/devices/pci_14f1_5b7a’
dvb.device = ‘/dev/dvb/adapter0/frontend0’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘dvb’
linux.device_file = ‘/dev/dvb/adapter0/frontend0’

24: udi = ‘/org/freedesktop/Hal/devices/pci_14f1_5b7a_dvb_0’
info.subsystem = ‘dvb’
info.product = ‘DVB Device’
info.category = ‘dvb’
info.udi = ‘/org/freedesktop/Hal/devices/pci_14f1_5b7a_dvb_0’
info.capabilities = { ‘dvb’, ‘access_control’ }
access_control.file = ‘/dev/dvb/adapter0/dvr0’
access_control.type = ‘dvb’
info.callouts.add = { ‘hal-acl-tool --add-device’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:14.4/0000:02:06.0/dvb/dvb0.dvr0’
info.callouts.remove = { ‘hal-acl-tool --remove-device’ }
info.parent = ‘/org/freedesktop/Hal/devices/pci_14f1_5b7a’
dvb.device = ‘/dev/dvb/adapter0/dvr0’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘dvb’
linux.device_file = ‘/dev/dvb/adapter0/dvr0’

25: udi = ‘/org/freedesktop/Hal/devices/pci_14f1_5b7a_dvb’
info.subsystem = ‘dvb’
info.product = ‘DVB Device’
info.category = ‘dvb’
info.udi = ‘/org/freedesktop/Hal/devices/pci_14f1_5b7a_dvb’
info.capabilities = { ‘dvb’, ‘access_control’ }
access_control.file = ‘/dev/dvb/adapter0/demux0’
access_control.type = ‘dvb’
info.callouts.add = { ‘hal-acl-tool --add-device’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:14.4/0000:02:06.0/dvb/dvb0.demux0’
info.callouts.remove = { ‘hal-acl-tool --remove-device’ }
info.parent = ‘/org/freedesktop/Hal/devices/pci_14f1_5b7a’
dvb.device = ‘/dev/dvb/adapter0/demux0’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘dvb’
linux.device_file = ‘/dev/dvb/adapter0/demux0’

26: udi =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_capture_2’
alsa.originating_device =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0’
info.subsystem = ‘sound’
alsa.card = 0 (0x0)
info.product = ‘ALC883 Analog ALSA Capture Device’
info.category = ‘alsa’
alsa.type = ‘capture’
info.udi =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_capture_2’
info.capabilities = { ‘alsa’, ‘access_control’ }
alsa.card_id = ‘HDA ATI SB’
access_control.file = ‘/dev/snd/pcmC0D2c’
alsa.device = 2 (0x2)
access_control.type = ‘sound’
alsa.pcm_class = ‘generic’
info.callouts.add = { ‘hal-acl-tool --add-device’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:14.2/sound/card0/pcmC0D2c’
alsa.device_id = ‘ALC883 Analog’
info.callouts.remove = { ‘hal-acl-tool --remove-device’ }
info.parent = ‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0’
linux.hotplug_type = 2 (0x2)
alsa.device_file = ‘/dev/snd/pcmC0D2c’
linux.subsystem = ‘sound’
linux.device_file = ‘/dev/snd/pcmC0D2c’

27: udi =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_control__1’
alsa.originating_device =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0’
info.subsystem = ‘sound’
alsa.card = 0 (0x0)
info.product = ‘HDA ATI SB ALSA Control Device’
info.category = ‘alsa’
alsa.type = ‘control’
info.udi =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_control__1’
info.capabilities = { ‘alsa’, ‘access_control’ }
alsa.card_id = ‘HDA ATI SB’
access_control.file = ‘/dev/snd/controlC0’
access_control.type = ‘sound’
info.callouts.add = { ‘hal-acl-tool --add-device’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:14.2/sound/card0/controlC0’
info.callouts.remove = { ‘hal-acl-tool --remove-device’ }
info.parent = ‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0’
linux.hotplug_type = 2 (0x2)
alsa.device_file = ‘/dev/snd/controlC0’
linux.subsystem = ‘sound’
linux.device_file = ‘/dev/snd/controlC0’

28: udi =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_playback_1’
alsa.originating_device =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0’
info.subsystem = ‘sound’
alsa.card = 0 (0x0)
info.product = ‘ALC883 Digital ALSA Playback Device’
info.category = ‘alsa’
alsa.type = ‘playback’
info.udi =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_playback_1’
info.capabilities = { ‘alsa’, ‘access_control’ }
alsa.card_id = ‘HDA ATI SB’
access_control.file = ‘/dev/snd/pcmC0D1p’
alsa.device = 1 (0x1)
access_control.type = ‘sound’
alsa.pcm_class = ‘generic’
info.callouts.add = { ‘hal-acl-tool --add-device’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:14.2/sound/card0/pcmC0D1p’
alsa.device_id = ‘ALC883 Digital’
info.callouts.remove = { ‘hal-acl-tool --remove-device’ }
info.parent = ‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0’
linux.hotplug_type = 2 (0x2)
alsa.device_file = ‘/dev/snd/pcmC0D1p’
linux.subsystem = ‘sound’
linux.device_file = ‘/dev/snd/pcmC0D1p’

29: udi =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_hw_specific_0’
alsa.originating_device =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0’
info.subsystem = ‘sound’
alsa.card = 0 (0x0)
info.product = ‘HDA ATI SB ALSA hardware specific Device’
info.category = ‘alsa’
alsa.type = ‘hw_specific’
info.udi =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_hw_specific_0’
info.capabilities = { ‘alsa’, ‘access_control’ }
alsa.card_id = ‘HDA ATI SB’
access_control.file = ‘/dev/snd/hwC0D0’
alsa.device = 0 (0x0)
access_control.type = ‘sound’
info.callouts.add = { ‘hal-acl-tool --add-device’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:14.2/sound/card0/hwC0D0’
info.callouts.remove = { ‘hal-acl-tool --remove-device’ }
info.parent = ‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0’
linux.hotplug_type = 2 (0x2)
alsa.device_file = ‘/dev/snd/hwC0D0’
linux.subsystem = ‘sound’
linux.device_file = ‘/dev/snd/hwC0D0’

30: udi =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_capture_0’
alsa.originating_device =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0’
info.subsystem = ‘sound’
alsa.card = 0 (0x0)
info.product = ‘ALC883 Analog ALSA Capture Device’
info.category = ‘alsa’
alsa.type = ‘capture’
info.udi =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_capture_0’
info.capabilities = { ‘alsa’, ‘access_control’ }
alsa.card_id = ‘HDA ATI SB’
access_control.file = ‘/dev/snd/pcmC0D0c’
alsa.device = 0 (0x0)
access_control.type = ‘sound’
alsa.pcm_class = ‘generic’
info.callouts.add = { ‘hal-acl-tool --add-device’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:14.2/sound/card0/pcmC0D0c’
alsa.device_id = ‘ALC883 Analog’
info.callouts.remove = { ‘hal-acl-tool --remove-device’ }
info.parent = ‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0’
linux.hotplug_type = 2 (0x2)
alsa.device_file = ‘/dev/snd/pcmC0D0c’
linux.subsystem = ‘sound’
linux.device_file = ‘/dev/snd/pcmC0D0c’

31: udi =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_playback_0’
alsa.originating_device =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0’
info.subsystem = ‘sound’
alsa.card = 0 (0x0)
info.product = ‘ALC883 Analog ALSA Playback Device’
info.category = ‘alsa’
alsa.type = ‘playback’
info.udi =
‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0_alsa_playback_0’
info.capabilities = { ‘alsa’, ‘access_control’ }
alsa.card_id = ‘HDA ATI SB’
access_control.file = ‘/dev/snd/pcmC0D0p’
alsa.device = 0 (0x0)
access_control.type = ‘sound’
alsa.pcm_class = ‘generic’
info.callouts.add = { ‘hal-acl-tool --add-device’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:14.2/sound/card0/pcmC0D0p’
alsa.device_id = ‘ALC883 Analog’
info.callouts.remove = { ‘hal-acl-tool --remove-device’ }
info.parent = ‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0’
linux.hotplug_type = 2 (0x2)
alsa.device_file = ‘/dev/snd/pcmC0D0p’
linux.subsystem = ‘sound’
linux.device_file = ‘/dev/snd/pcmC0D0p’

32: udi =
‘/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_device_lun0_scsi_generic’
info.subsystem = ‘scsi_generic’
info.product = ‘SCSI Generic Interface’
scsi_generic.device = ‘/dev/sg1’
info.category = ‘scsi_generic’
info.udi =
‘/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_device_lun0_scsi_generic’
info.capabilities = { ‘scsi_generic’, ‘access_control’ }
access_control.file = ‘/dev/sg1’
access_control.type = ‘cdrom’
info.callouts.add = { ‘hal-acl-tool --add-device’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:14.1/host4/target4:0:0/4:0:0:0/scsi_generic/sg1’
info.callouts.remove = { ‘hal-acl-tool --remove-device’ }
info.parent =
‘/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_device_lun0’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘scsi_generic’
linux.device_file = ‘/dev/sg1’

33: udi = ‘/org/freedesktop/Hal/devices/acpi_P001’
linux.acpi_type = 1 (0x1)
info.product = ‘AMD Phenom™ 9750 Quad-Core Processor’
processor.number = 0 (0x0)
info.category = ‘processor’
processor.can_throttle = false
info.udi = ‘/org/freedesktop/Hal/devices/acpi_P001’
info.capabilities = { ‘processor’ }
info.parent = ‘/org/freedesktop/Hal/devices/computer’
linux.hotplug_type = 4 (0x4)
linux.acpi_path = ‘/proc/acpi/processor/P001’

34: udi = ‘/org/freedesktop/Hal/devices/acpi_P002’
linux.acpi_type = 1 (0x1)
info.product = ‘AMD Phenom™ 9750 Quad-Core Processor’
processor.number = 1 (0x1)
info.category = ‘processor’
processor.can_throttle = false
info.udi = ‘/org/freedesktop/Hal/devices/acpi_P002’
info.capabilities = { ‘processor’ }
info.parent = ‘/org/freedesktop/Hal/devices/computer’
linux.hotplug_type = 4 (0x4)
linux.acpi_path = ‘/proc/acpi/processor/P002’

35: udi = ‘/org/freedesktop/Hal/devices/acpi_P003’
linux.acpi_type = 1 (0x1)
info.product = ‘AMD Phenom™ 9750 Quad-Core Processor’
processor.number = 2 (0x2)
info.category = ‘processor’
processor.can_throttle = false
info.udi = ‘/org/freedesktop/Hal/devices/acpi_P003’
info.capabilities = { ‘processor’ }
info.parent = ‘/org/freedesktop/Hal/devices/computer’
linux.hotplug_type = 4 (0x4)
linux.acpi_path = ‘/proc/acpi/processor/P003’

36: udi = ‘/org/freedesktop/Hal/devices/acpi_P004’
linux.acpi_type = 1 (0x1)
info.product = ‘AMD Phenom™ 9750 Quad-Core Processor’
processor.number = 3 (0x3)
info.category = ‘processor’
processor.can_throttle = false
info.udi = ‘/org/freedesktop/Hal/devices/acpi_P004’
info.capabilities = { ‘processor’ }
info.parent = ‘/org/freedesktop/Hal/devices/computer’
linux.hotplug_type = 4 (0x4)
linux.acpi_path = ‘/proc/acpi/processor/P004’

37: udi = ‘/org/freedesktop/Hal/devices/net_computer_loopback’
net.arp_proto_hw_id = 772 (0x304)
info.subsystem = ‘net’
info.product = ‘Loopback device Interface’
info.category = ‘net.loopback’
info.udi = ‘/org/freedesktop/Hal/devices/net_computer_loopback’
info.capabilities = { ‘net’, ‘net.loopback’ }
linux.sysfs_path = ‘/sys/devices/virtual/net/lo’
info.parent = ‘/org/freedesktop/Hal/devices/computer’
net.originating_device = ‘/org/freedesktop/Hal/devices/computer’
net.interface = ‘lo’
net.address = ‘00:00:00:00:00:00’
linux.hotplug_type = 2 (0x2)
net.linux.ifindex = 1 (0x1)
linux.subsystem = ‘net’

[user]

38: udi = ‘/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input’
info.subsystem = ‘input’
info.product = ‘PC Speaker’
info.category = ‘input’
info.udi = ‘/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input’
info.capabilities = { ‘input’ }
linux.sysfs_path = ‘/sys/devices/platform/pcspkr/input/input2/event2’
info.parent = ‘/org/freedesktop/Hal/devices/platform_pcspkr’
input.originating_device = ‘/org/freedesktop/Hal/devices/platform_pcspkr’
input.device = ‘/dev/input/event2’
linux.hotplug_type = 2 (0x2)
input.product = ‘PC Speaker’
linux.subsystem = ‘input’
linux.device_file = ‘/dev/input/event2’

39: udi =
‘/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input’
info.subsystem = ‘input’
input.xkb.model = ‘evdev’
info.product = ‘AT Translated Set 2 keyboard’
input.xkb.layout = ‘us’
info.category = ‘input’
info.udi =
‘/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input’
info.addons.singleton = { ‘hald-addon-input’ }
input.xkb.variant = ‘’
info.capabilities = { ‘input’, ‘input.keyboard’, ‘input.keypad’,
‘input.keys’, ‘button’ }
input.x11_driver = ‘evdev’
linux.sysfs_path =
‘/sys/devices/platform/i8042/serio0/input/input0/event0’
info.parent = ‘/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port’
input.originating_device =
‘/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port’
input.device = ‘/dev/input/event0’
linux.hotplug_type = 2 (0x2)
input.product = ‘AT Translated Set 2 keyboard’
linux.subsystem = ‘input’
linux.device_file = ‘/dev/input/event0’
input.xkb.rules = ‘base’

40: udi = ‘/org/freedesktop/Hal/devices/net_00_18_e7_18_38_8c’
net.arp_proto_hw_id = 1 (0x1)
info.subsystem = ‘net’
info.product = ‘Networking Interface’
net.80203.mac_address = 106956339340ull (0x18e718388cull)
info.category = ‘net.80203’
info.udi = ‘/org/freedesktop/Hal/devices/net_00_18_e7_18_38_8c’
info.interfaces = { ‘org.freedesktop.Hal.Device.WakeOnLan’ }
info.capabilities = { ‘net’, ‘net.80203’, ‘wake_on_lan’ }
org.freedesktop.Hal.Device.WakeOnLan.method_names = { ‘GetSupported’,
‘GetEnabled’, ‘SetEnabled’ }
org.freedesktop.Hal.Device.WakeOnLan.method_signatures = { ‘’, ‘’, ‘b’ }
org.freedesktop.Hal.Device.WakeOnLan.method_argnames = { ‘’, ‘’,
‘enable’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:14.4/0000:02:05.0/net/eth0’
org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {
‘hal-system-wol-supported’, ‘hal-system-wol-enabled’,
‘hal-system-wol-enable’ }
info.parent = ‘/org/freedesktop/Hal/devices/pci_10ec_8139’
net.originating_device = ‘/org/freedesktop/Hal/devices/pci_10ec_8139’
net.interface = ‘eth0’
net.address = ‘00:18:e7:18:38:8c’
linux.hotplug_type = 2 (0x2)
net.linux.ifindex = 2 (0x2)
linux.subsystem = ‘net’

41: udi = ‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0’
info.subsystem = ‘sound’
info.product = ‘HDA ATI SB Sound Card’
info.category = ‘sound’
info.udi = ‘/org/freedesktop/Hal/devices/pci_1002_4383_sound_card_0’
info.capabilities = { ‘sound’ }
linux.sysfs_path = ‘/sys/devices/pci0000:00/0000:00:14.2/sound/card0’
sound.originating_device = ‘/org/freedesktop/Hal/devices/pci_1002_4383’
info.parent = ‘/org/freedesktop/Hal/devices/pci_1002_4383’
sound.card = 0 (0x0)
sound.card_id = ‘HDA ATI SB’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘sound’

42: udi = ‘/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_0’
info.subsystem = ‘scsi_host’
scsi_host.host = 5 (0x5)
info.product = ‘SCSI Host Adapter’
info.category = ‘scsi_host’
info.udi = ‘/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_0’
info.capabilities = { ‘scsi_host’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:14.1/host5/scsi_host/host5’
info.parent = ‘/org/freedesktop/Hal/devices/pci_1002_438c’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘scsi_host’

43: udi = ‘/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_host’
info.subsystem = ‘scsi_host’
scsi_host.host = 4 (0x4)
info.product = ‘SCSI Host Adapter’
info.category = ‘scsi_host’
info.udi =
‘/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host_scsi_host’
info.capabilities = { ‘scsi_host’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:14.1/host4/scsi_host/host4’
info.parent = ‘/org/freedesktop/Hal/devices/pci_1002_438c_scsi_host’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘scsi_host’

44: udi = ‘/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_2’
info.subsystem = ‘scsi_host’
scsi_host.host = 3 (0x3)
info.product = ‘SCSI Host Adapter’
info.category = ‘scsi_host’
info.udi = ‘/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_2’
info.capabilities = { ‘scsi_host’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:12.0/host3/scsi_host/host3’
info.parent = ‘/org/freedesktop/Hal/devices/pci_1002_4380’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘scsi_host’

45: udi = ‘/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_1’
info.subsystem = ‘scsi_host’
scsi_host.host = 2 (0x2)
info.product = ‘SCSI Host Adapter’
info.category = ‘scsi_host’
info.udi = ‘/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_1’
info.capabilities = { ‘scsi_host’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:12.0/host2/scsi_host/host2’
info.parent = ‘/org/freedesktop/Hal/devices/pci_1002_4380’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘scsi_host’

46: udi = ‘/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_0’
info.subsystem = ‘scsi_host’
scsi_host.host = 1 (0x1)
info.product = ‘SCSI Host Adapter’
info.category = ‘scsi_host’
info.udi = ‘/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_0’
info.capabilities = { ‘scsi_host’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:12.0/host1/scsi_host/host1’
info.parent = ‘/org/freedesktop/Hal/devices/pci_1002_4380’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘scsi_host’

47: udi =
‘/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_scsi_device_lun0_scsi_generic’
info.subsystem = ‘scsi_generic’
info.product = ‘SCSI Generic Interface’
scsi_generic.device = ‘/dev/sg0’
info.category = ‘scsi_generic’
info.udi =
‘/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_scsi_device_lun0_scsi_generic’
info.capabilities = { ‘scsi_generic’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0/scsi_generic/sg0’
info.parent =
‘/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_scsi_device_lun0’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘scsi_generic’
linux.device_file = ‘/dev/sg0’

48: udi = ‘/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_scsi_host’
info.subsystem = ‘scsi_host’
scsi_host.host = 0 (0x0)
info.product = ‘SCSI Host Adapter’
info.category = ‘scsi_host’
info.udi =
‘/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host_scsi_host’
info.capabilities = { ‘scsi_host’ }
linux.sysfs_path =
‘/sys/devices/pci0000:00/0000:00:12.0/host0/scsi_host/host0’
info.parent = ‘/org/freedesktop/Hal/devices/pci_1002_4380_scsi_host’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘scsi_host’

49: udi = ‘/org/freedesktop/Hal/devices/computer_logicaldev_input_0’
button.has_state = false
info.subsystem = ‘input’
info.product = ‘Power Button (CM)’
button.type = ‘power’
info.category = ‘input’
info.udi = ‘/org/freedesktop/Hal/devices/computer_logicaldev_input_0’
info.addons.singleton = { ‘hald-addon-input’ }
info.capabilities = { ‘input’, ‘button’ }
linux.sysfs_path =
‘/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4’
info.parent = ‘/org/freedesktop/Hal/devices/computer’
input.device = ‘/dev/input/event4’
linux.hotplug_type = 2 (0x2)
input.product = ‘Power Button (CM)’
linux.subsystem = ‘input’
linux.device_file = ‘/dev/input/event4’

50: udi = ‘/org/freedesktop/Hal/devices/computer_logicaldev_input’
button.has_state = false
info.subsystem = ‘input’
info.product = ‘Power Button (FF)’
button.type = ‘power’
info.category = ‘input’
info.udi = ‘/org/freedesktop/Hal/devices/computer_logicaldev_input’
info.addons.singleton = { ‘hald-addon-input’ }
info.capabilities = { ‘input’, ‘button’ }
linux.sysfs_path =
‘/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3’
info.parent = ‘/org/freedesktop/Hal/devices/computer’
input.device = ‘/dev/input/event3’
linux.hotplug_type = 2 (0x2)
input.product = ‘Power Button (FF)’
linux.subsystem = ‘input’
linux.device_file = ‘/dev/input/event3’

51: udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0c01’
info.linux.driver = ‘system’
info.subsystem = ‘pnp’
info.product = ‘System Board’
info.udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0c01’
linux.sysfs_path = ‘/sys/devices/pnp0/00:0e’
info.parent = ‘/org/freedesktop/Hal/devices/computer’
pnp.id = ‘PNP0c01’
pnp.description = ‘System Board’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘pnp’

52: udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0c02_2’
info.linux.driver = ‘system’
info.subsystem = ‘pnp’
info.product = ‘General ID for reserving resources required by PnP
motherboard registers. (Not device specific.)’
info.udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0c02_2’
linux.sysfs_path = ‘/sys/devices/pnp0/00:0d’
info.parent = ‘/org/freedesktop/Hal/devices/computer’
pnp.id = ‘PNP0c02’
pnp.description = ‘General ID for reserving resources required by PnP
motherboard registers. (Not device specific.)’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘pnp’

53: udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0c02_1’
info.linux.driver = ‘system’
info.subsystem = ‘pnp’
info.product = ‘General ID for reserving resources required by PnP
motherboard registers. (Not device specific.)’
info.udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0c02_1’
linux.sysfs_path = ‘/sys/devices/pnp0/00:0c’
info.parent = ‘/org/freedesktop/Hal/devices/computer’
pnp.id = ‘PNP0c02’
pnp.description = ‘General ID for reserving resources required by PnP
motherboard registers. (Not device specific.)’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘pnp’

54: udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0501’
info.linux.driver = ‘serial’
info.subsystem = ‘pnp’
info.product = ‘16550A-compatible COM port’
info.udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0501’
linux.sysfs_path = ‘/sys/devices/pnp0/00:0b’
info.parent = ‘/org/freedesktop/Hal/devices/computer’
pnp.id = ‘PNP0501’
pnp.description = ‘16550A-compatible COM port’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘pnp’

55: udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0f03’
info.linux.driver = ‘i8042 aux’
info.subsystem = ‘pnp’
info.product = ‘Microsoft PS/2-style Mouse’
info.udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0f03’
linux.sysfs_path = ‘/sys/devices/pnp0/00:0a’
info.parent = ‘/org/freedesktop/Hal/devices/computer’
pnp.id = ‘PNP0f03’
pnp.description = ‘Microsoft PS/2-style Mouse’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘pnp’

56: udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0303’
info.linux.driver = ‘i8042 kbd’
info.subsystem = ‘pnp’
info.product = ‘IBM Enhanced (101/102-key, PS/2 mouse support)’
info.udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0303’
linux.sysfs_path = ‘/sys/devices/pnp0/00:09’
info.parent = ‘/org/freedesktop/Hal/devices/computer’
pnp.id = ‘PNP0303’
pnp.description = ‘IBM Enhanced (101/102-key, PS/2 mouse support)’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘pnp’

57: udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0c02_0’
info.linux.driver = ‘system’
info.subsystem = ‘pnp’
info.product = ‘General ID for reserving resources required by PnP
motherboard registers. (Not device specific.)’
info.udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0c02_0’
linux.sysfs_path = ‘/sys/devices/pnp0/00:08’
info.parent = ‘/org/freedesktop/Hal/devices/computer’
pnp.id = ‘PNP0c02’
pnp.description = ‘General ID for reserving resources required by PnP
motherboard registers. (Not device specific.)’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘pnp’

58: udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0c02’
info.linux.driver = ‘system’
info.subsystem = ‘pnp’
info.product = ‘General ID for reserving resources required by PnP
motherboard registers. (Not device specific.)’
info.udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0c02’
linux.sysfs_path = ‘/sys/devices/pnp0/00:07’
info.parent = ‘/org/freedesktop/Hal/devices/computer’
pnp.id = ‘PNP0c02’
pnp.description = ‘General ID for reserving resources required by PnP
motherboard registers. (Not device specific.)’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘pnp’

59: udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0103’
info.subsystem = ‘pnp’
info.product = ‘PnP Device (PNP0103)’
info.udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0103’
linux.sysfs_path = ‘/sys/devices/pnp0/00:06’
info.parent = ‘/org/freedesktop/Hal/devices/computer’
pnp.id = ‘PNP0103’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘pnp’

60: udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0700’
info.subsystem = ‘pnp’
info.product = ‘PC standard floppy disk controller’
info.udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0700’
linux.sysfs_path = ‘/sys/devices/pnp0/00:05’
info.parent = ‘/org/freedesktop/Hal/devices/computer’
pnp.id = ‘PNP0700’
pnp.description = ‘PC standard floppy disk controller’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘pnp’

61: udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0c04’
info.subsystem = ‘pnp’
info.product = ‘Math Coprocessor’
info.udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0c04’
linux.sysfs_path = ‘/sys/devices/pnp0/00:04’
info.parent = ‘/org/freedesktop/Hal/devices/computer’
pnp.id = ‘PNP0c04’
pnp.description = ‘Math Coprocessor’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘pnp’

62: udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0800’
info.subsystem = ‘pnp’
info.product = ‘AT-style speaker sound’
info.udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0800’
linux.sysfs_path = ‘/sys/devices/pnp0/00:03’
info.parent = ‘/org/freedesktop/Hal/devices/computer’
pnp.id = ‘PNP0800’
pnp.description = ‘AT-style speaker sound’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘pnp’

63: udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0b00’
info.linux.driver = ‘rtc_cmos’
info.subsystem = ‘pnp’
info.product = ‘AT Real-Time Clock’
info.udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0b00’
linux.sysfs_path = ‘/sys/devices/pnp0/00:02’
info.parent = ‘/org/freedesktop/Hal/devices/computer’
pnp.id = ‘PNP0b00’
pnp.description = ‘AT Real-Time Clock’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘pnp’

64: udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0200’
info.subsystem = ‘pnp’
info.product = ‘AT DMA Controller’
info.udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0200’
linux.sysfs_path = ‘/sys/devices/pnp0/00:01’
info.parent = ‘/org/freedesktop/Hal/devices/computer’
pnp.id = ‘PNP0200’
pnp.description = ‘AT DMA Controller’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘pnp’

65: udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0a03’
info.subsystem = ‘pnp’
info.product = ‘PCI Bus’
info.udi = ‘/org/freedesktop/Hal/devices/pnp_PNP0a03’
linux.sysfs_path = ‘/sys/devices/pnp0/00:00’
info.parent = ‘/org/freedesktop/Hal/devices/computer’
pnp.id = ‘PNP0a03’
pnp.description = ‘PCI Bus’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘pnp’

66: udi = ‘/org/freedesktop/Hal/devices/platform_vesafb_0’
info.linux.driver = ‘vesafb’
info.subsystem = ‘platform’
info.product = ‘Platform Device (vesafb.0)’
info.udi = ‘/org/freedesktop/Hal/devices/platform_vesafb_0’
platform.id = ‘vesafb.0’
linux.sysfs_path = ‘/sys/devices/platform/vesafb.0’
info.parent = ‘/org/freedesktop/Hal/devices/computer’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘platform’

67: udi = ‘/org/freedesktop/Hal/devices/platform_serial8250’
info.linux.driver = ‘serial8250’
info.subsystem = ‘platform’
info.product = ‘Platform Device (serial8250)’
info.udi = ‘/org/freedesktop/Hal/devices/platform_serial8250’
platform.id = ‘serial8250’
linux.sysfs_path = ‘/sys/devices/platform/serial8250’
info.parent = ‘/org/freedesktop/Hal/devices/computer’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘platform’

68: udi = ‘/org/freedesktop/Hal/devices/platform_pcspkr’
info.linux.driver = ‘pcspkr’
info.subsystem = ‘platform’
info.product = ‘Platform Device (pcspkr)’
info.udi = ‘/org/freedesktop/Hal/devices/platform_pcspkr’
platform.id = ‘pcspkr’
linux.sysfs_path = ‘/sys/devices/platform/pcspkr’
info.parent = ‘/org/freedesktop/Hal/devices/computer’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘platform’

69: udi = ‘/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port’
info.linux.driver = ‘psmouse’
info.subsystem = ‘serio’
info.product = ‘i8042 AUX port’
info.udi = ‘/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port’
serio.id = ‘serio1’
linux.sysfs_path = ‘/sys/devices/platform/i8042/serio1’
serio.description = ‘i8042 AUX port’
info.parent = ‘/org/freedesktop/Hal/devices/platform_i8042’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘serio’

70: udi = ‘/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port’
info.linux.driver = ‘atkbd’
info.subsystem = ‘serio’
info.product = ‘i8042 KBD port’
info.udi = ‘/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port’
serio.id = ‘serio0’
linux.sysfs_path = ‘/sys/devices/platform/i8042/serio0’
serio.description = ‘i8042 KBD port’
info.parent = ‘/org/freedesktop/Hal/devices/platform_i8042’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘serio’

71: udi = ‘/org/freedesktop/Hal/devices/platform_i8042’
info.linux.driver = ‘i8042’
info.subsystem = ‘platform’
info.product = ‘Platform Device (i8042)’
info.udi = ‘/org/freedesktop/Hal/devices/platform_i8042’
platform.id = ‘i8042’
linux.sysfs_path = ‘/sys/devices/platform/i8042’
info.parent = ‘/org/freedesktop/Hal/devices/computer’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘platform’

72: udi = ‘/org/freedesktop/Hal/devices/platform_floppy_0’
info.subsystem = ‘platform’
info.product = ‘Platform Device (floppy.0)’
info.udi = ‘/org/freedesktop/Hal/devices/platform_floppy_0’
platform.id = ‘floppy.0’
linux.sysfs_path = ‘/sys/devices/platform/floppy.0’
info.parent = ‘/org/freedesktop/Hal/devices/computer’
linux.hotplug_type = 2 (0x2)
linux.subsystem = ‘platform’

73: udi = ‘/org/freedesktop/Hal/devices/pci_1022_1204’
pci.subsys_product_id = 0 (0x0)
info.subsystem = ‘pci’
pci.subsys_vendor_id = 0 (0x0)
info.product = ‘Family 10h [Opteron, Athlon64, Sempron] Link Control’
pci.device_class = 6 (0x6)
info.udi = ‘/org/freedesktop/Hal/devices/pci_1022_1204’
pci.device_subclass = 0 (0x0)
pci.device_protocol = 0 (0x0)
pci.vendor = ‘Advanced Micro Devices [AMD]’
linux.sysfs_path = ‘/sys/devices/pci0000:00/0000:00:18.4’
info.vendor = ‘Advanced Micro Devices [AMD]’
info.parent = ‘/org/freedesktop/Hal/devices/computer’
pci.product = ‘Family 10h [Opteron, Athlon64, Sempron] Link Control’
pci.linux.sysfs_path = ‘/sys/devices/pci0000:00/0000:00:18.4’
pci.product_id = 4612 (0x1204)
linux.hotplug_type = 2 (0x2)
pci.vendor_id = 4130 (0x1022)
linux.subsystem = ‘pci’

74: udi = ‘/org/freedesktop/Hal/devices/pci_1022_1203’
pci.subsys_product_id = 0 (0x0)
info.subsystem = ‘pci’
pci.subsys_vendor_id = 0 (0x0)
info.product = ‘Family 10h [Opteron, Athlon64, Sempron] Miscellaneous
Control’
pci.device_class = 6 (0x6)
info.udi = ‘/org/freedesktop/Hal/devices/pci_1022_1203’
pci.device_subclass = 0 (0x0)
pci.device_protocol = 0 (0x0)
pci.vendor = ‘Advanced Micro Devices [AMD]’
linux.sysfs_path = ‘/sys/devices/pci0000:00/0000:00:18.3’
info.vendor = ‘Advanced Micro Devices [AMD]’
info.parent = ‘/org/freedesktop/Hal/devices/computer’
pci.product = ‘Family 10h [Opteron, Athlon64, Sempron] Miscellaneous
Control’
pci.linux.sysfs_path = ‘/sys/devices/pci0000:00/0000:00:18.3’
pci.product_id = 4611 (0x1203)
linux.hotplug_type = 2 (0x2)
pci.vendor_id = 4130 (0x1022)
linux.subsystem = ‘pci’

[user]

01: None 00.0: 0102 Floppy disk controller
[Created at floppy.112]
Unique ID: rdCR.3wRL2_g4d2B
Hardware Class: storage
Model: “Floppy disk controller”
I/O Ports: 0x3f2-0x3f5 (rw)
DMA: 2
IRQ: 6 (13 events)
I/O Port: 0x3f7 (rw)
Config Status: cfg=no, avail=yes, need=no, active=unknown

02: Floppy 00.0: 10603 Floppy Disk
[Created at floppy.120]
UDI:
/org/freedesktop/Hal/devices/platform_floppy_0_storage_platform_floppy
Unique ID: sPPV.oZ89vuho4Y3
Parent ID: rdCR.3wRL2_g4d2B
Hardware Class: floppy
Model: “Floppy Disk”
Device File: /dev/fd0
Size: 3.5 ‘’
Size: 2880 sectors a 512 bytes
Drive status: no medium
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #1 (Floppy disk controller)

03: None 00.0: 10105 BIOS
[Created at bios.189]
Unique ID: rdCR.lZF+r4EgHp4
Hardware Class: bios
BIOS Keyboard LED Status:
Scroll Lock: off
Num Lock: on
Caps Lock: off
Serial Port 0: 0x3f8
Base Memory: 639 kB
PnP BIOS: @@@0000
BIOS: extended read supported
MP spec rev 1.1 info:
OEM id: “ATI”
Product id: “”
4 CPUs (0 disabled)
BIOS32 Service Directory Entry: 0xf0010
SMBIOS Version: 2.5
BIOS Info: #0
Vendor: “American Megatrends Inc.”
Version: “1001”
Date: “07/01/2008”
Start Address: 0xf0000
ROM Size: 1024 kB
Features: 0x0533000000017f8bde90
ISA supported
PCI supported
PnP supported
APM supported
BIOS flashable
BIOS shadowing allowed
ESCD supported
CD boot supported
Selectable boot supported
BIOS ROM socketed
EDD spec supported
1.2MB Floppy supported
720kB Floppy supported
2.88MB Floppy supported
Print Screen supported
8042 Keyboard Services supported
Serial Services supported
Printer Services supported
CGA/Mono Video supported
ACPI supported
USB Legacy supported
LS-120 boot supported
ATAPI ZIP boot supported
BIOS Boot Spec supported
System Info: #1
Manufacturer: “System manufacturer”
Product: “System Product Name”
Version: “System Version”
Serial: “System Serial Number”
UUID: undefined, but settable
Wake-up: 0x06 (Power Switch)
Board Info: #2
Manufacturer: “ASUSTeK Computer INC.”
Product: “M3A”
Version: “Rev 1.xx”
Serial: “MB-1234567890”
Asset Tag: “To Be Filled By O.E.M.”
Type: 0x0a (Motherboard)
Features: 0x09
Hosting Board
Replaceable
Location: “To Be Filled By O.E.M.”
Chassis: #3
Chassis Info: #3
Manufacturer: “Chassis Manufacture”
Version: “Chassis Version”
Serial: “Chassis Serial Number”
Asset Tag: “Asset-1234567890”
Type: 0x03 (Desktop)
Bootup State: 0x03 (Safe)
Power Supply State: 0x03 (Safe)
Thermal State: 0x03 (Safe)
Security Status: 0x03 (None)
OEM Info: 0x00000001
Processor Info: #4
Socket: “CPU 1”
Socket Type: 0x01 (Other)
Socket Status: Populated
Type: 0x03 (CPU)
Family: 0x8d (Other)
Manufacturer: “AMD”
Version: “AMD Phenom™ 9750 Quad-Core Processor”
Serial: “To Be Filled By O.E.M.”
Asset Tag: “To Be Filled By O.E.M.”
Part Number: “To Be Filled By O.E.M.”
Processor ID: 0x178bfbff00100f23
Status: 0x01 (Enabled)
Voltage: 1.5 V
External Clock: 200 MHz
Max. Speed: 2400 MHz
Current Speed: 2400 MHz
L1 Cache: #5
L2 Cache: #6
L3 Cache: #7
Cache Info: #5
Designation: “L1-Cache”
Level: L1
State: Enabled
Mode: 0x02 (Varies with Memory Address)
Location: 0x00 (Internal, Not Socketed)
ECC: 0x05 (Single-bit)
Type: 0x04 (Data)
Associativity: 0x05 (4-way Set-Associative)
Max. Size: 512 kB
Current Size: 512 kB
Supported SRAM Types: 0x0010 (Pipeline Burst)
Current SRAM Type: 0x0010 (Pipeline Burst)
Cache Info: #6
Designation: “L2-Cache”
Level: L2
State: Enabled
Mode: 0x02 (Varies with Memory Address)
Location: 0x00 (Internal, Not Socketed)
ECC: 0x05 (Single-bit)
Type: 0x05 (Unified)
Associativity: 0x05 (4-way Set-Associative)
Max. Size: 2048 kB
Current Size: 2048 kB
Supported SRAM Types: 0x0010 (Pipeline Burst)
Current SRAM Type: 0x0010 (Pipeline Burst)
Cache Info: #7
Designation: “L3-Cache”
Level: L3
State: Enabled
Mode: 0x02 (Varies with Memory Address)
Location: 0x00 (Internal, Not Socketed)
ECC: 0x05 (Single-bit)
Type: 0x05 (Unified)
Associativity: 0x05 (4-way Set-Associative)
Max. Size: 2048 kB
Current Size: 2048 kB
Supported SRAM Types: 0x0010 (Pipeline Burst)
Current SRAM Type: 0x0010 (Pipeline Burst)
Port Connector: #8
Type: 0x0d (Keyboard Port)
Internal Designator: “Null”
External Designator: “Keyboard”
External Connector: 0x0f (PS/2)
Port Connector: #9
Type: 0x0e (Mouse Port)
Internal Designator: “Null”
External Designator: “PS2Mouse”
External Connector: 0x0f (PS/2)
Port Connector: #10
Type: 0x09 (Serial Port 16550A Compatible)
Internal Designator: “Null”
External Designator: “COM1”
External Connector: 0x08 (DB-9 pin male)
Port Connector: #11
Type: 0x1d (Audio Port)
Internal Designator: “Null”
External Designator: “SPDIF_O”
External Connector: 0x1f (Mini-jack [headphones])
Port Connector: #12
Type: 0x10 (USB)
Internal Designator: “Null”
External Designator: “USB1”
External Connector: 0x12 (Access Bus [USB])
Port Connector: #13
Type: 0x10 (USB)
Internal Designator: “Null”
External Designator: “USB2”
External Connector: 0x12 (Access Bus [USB])
Port Connector: #14
Type: 0x10 (USB)
Internal Designator: “Null”
External Designator: “USB3”
External Connector: 0x12 (Access Bus [USB])
Port Connector: #15
Type: 0x10 (USB)
Internal Designator: “Null”
External Designator: “USB4”
External Connector: 0x12 (Access Bus [USB])
Port Connector: #16
Type: 0x1f (Network Port)
Internal Designator: “Null”
External Designator: “LAN1”
External Connector: 0x0b (RJ-45)
Port Connector: #17
Type: 0x1d (Audio Port)
Internal Designator: “Null”
External Designator: “Line In”
External Connector: 0x1f (Mini-jack [headphones])
Port Connector: #18
Type: 0x1d (Audio Port)
Internal Designator: “Null”
External Designator: “Line Out”
External Connector: 0x1f (Mini-jack [headphones])
Port Connector: #19
Type: 0x1d (Audio Port)
Internal Designator: “Null”
External Designator: “Mic In”
External Connector: 0x1f (Mini-jack [headphones])
Port Connector: #20
Type: 0x1d (Audio Port)
Internal Designator: “Null”
External Designator: “Center Out”
External Connector: 0x1f (Mini-jack [headphones])
Port Connector: #21
Type: 0x1d (Audio Port)
Internal Designator: “Null”
External Designator: “Surround Out”
External Connector: 0x1f (Mini-jack [headphones])
Port Connector: #22
Type: 0x1d (Audio Port)
Internal Designator: “Null”
External Designator: “Side Surround Out”
External Connector: 0x1f (Mini-jack [headphones])
Port Connector: #23
Type: 0xff (Other)
Internal Designator: “EATXPWR”
Internal Connector: 0xff (Other)
Port Connector: #24
Type: 0xff (Other)
Internal Designator: “ATX12V”
Internal Connector: 0xff (Other)
Port Connector: #25
Type: 0xff (Other)
Internal Designator: “CPU_FAN”
Internal Connector: 0xff (Other)
Port Connector: #26
Type: 0xff (Other)
Internal Designator: “PWR_FAN”
Internal Connector: 0xff (Other)
Port Connector: #27
Type: 0xff (Other)
Internal Designator: “CHA_FAN1”
Internal Connector: 0xff (Other)
Port Connector: #28
Type: 0x1d (Audio Port)
Internal Designator: “CDIN”
Internal Connector: 0x1c (On Board Sound Input from CD-ROM)
Port Connector: #29
Type: 0x1d (Audio Port)
Internal Designator: “AAFP”
Internal Connector: 0x1f (Mini-jack [headphones])
Port Connector: #30
Type: 0x1d (Audio Port)
Internal Designator: “SPDIF_OUT”
Internal Connector: 0x1f (Mini-jack [headphones])
Port Connector: #31
Type: 0xff (Other)
Internal Designator: “PRI_IDE”
Internal Connector: 0x16 (On Board IDE)
Port Connector: #32
Type: 0xff (Other)
Internal Designator: “FLOPPY”
Internal Connector: 0x17 (On Board Floppy)
Port Connector: #33
Type: 0xff (Other)
Internal Designator: “SPI”
Internal Connector: 0xff (Other)
Port Connector: #34
Type: 0x10 (USB)
Internal Designator: “USB5”
Internal Connector: 0x12 (Access Bus [USB])
Port Connector: #35
Type: 0x10 (USB)
Internal Designator: “USB6”
Internal Connector: 0x12 (Access Bus [USB])
Port Connector: #36
Type: 0x10 (USB)
Internal Designator: “USB7”
Internal Connector: 0x12 (Access Bus [USB])
Port Connector: #37
Type: 0x10 (USB)
Internal Designator: “USB8”
Internal Connector: 0x12 (Access Bus [USB])
Port Connector: #38
Type: 0x10 (USB)
Internal Designator: “USB9”
Internal Connector: 0x12 (Access Bus [USB])
Port Connector: #39
Type: 0x10 (USB)
Internal Designator: “USB10”
Internal Connector: 0x12 (Access Bus [USB])
Port Connector: #40
Type: 0xff (Other)
Internal Designator: “PANEL”
Internal Connector: 0xff (Other)
Port Connector: #41
Type: 0x20 (Other)
Internal Designator: “SATA1”
Internal Connector: 0x22 (Other)
Port Connector: #42
Type: 0x20 (Other)
Internal Designator: “SATA2”
Internal Connector: 0x22 (Other)
Port Connector: #43
Type: 0x20 (Other)
Internal Designator: “SATA3”
Internal Connector: 0x22 (Other)
Port Connector: #44
Type: 0x20 (Other)
Internal Designator: “SATA4”
Internal Connector: 0x22 (Other)
System Slot: #45
Designation: “PCIEX16”
Type: 0xa5 (Other)
Bus Width: 0x0d (Other)
Status: 0x04 (In Use)
Length: 0x03 (Short)
Slot ID: 2
Characteristics: 0x010c (3.3 V, Shared, PME#)
System Slot: #46
Designation: “PCIEX1-1”
Type: 0xa5 (Other)
Bus Width: 0x08 (Other)
Status: 0x03 (Available)
Length: 0x03 (Short)
Slot ID: 4
Characteristics: 0x010c (3.3 V, Shared, PME#)
System Slot: #47
Designation: “PCIEX1-2”
Type: 0xa5 (Other)
Bus Width: 0x08 (Other)
Status: 0x03 (Available)
Length: 0x03 (Short)
Slot ID: 5
Characteristics: 0x010c (3.3 V, Shared, PME#)
System Slot: #48
Designation: “PCI-1”
Type: 0x06 (PCI)
Bus Width: 0x05 (32 bit)
Status: 0x04 (In Use)
Length: 0x03 (Short)
Slot ID: 13
Characteristics: 0x010c (3.3 V, Shared, PME#)
System Slot: #49
Designation: “PCI-2”
Type: 0x06 (PCI)
Bus Width: 0x05 (32 bit)
Status: 0x04 (In Use)
Length: 0x03 (Short)
Slot ID: 14
Characteristics: 0x010c (3.3 V, Shared, PME#)
System Slot: #50
Designation: “PCI-3”
Type: 0x06 (PCI)
Bus Width: 0x05 (32 bit)
Status: 0x04 (In Use)
Length: 0x03 (Short)
Slot ID: 15
Characteristics: 0x010c (3.3 V, Shared, PME#)
On Board Devices: #51
Video: “To Be Filled By O.E.M.”
Language Info: #52
Languages: en|US|iso8859-1
Current: en|US|iso8859-1
Physical Memory Array: #53
Use: 0x03 (System memory)
Location: 0x03 (Motherboard)
Slots: 4
Max. Size: 8 GB
ECC: 0x03 (None)
Memory Array Mapping: #54
Memory Array: #53
Partition Width: 1
Start Address: 0x0000000000000000
End Address: 0x0000000240000000
Memory Device: #55
Location: “DIMM_A1”
Bank: “BANK0”
Manufacturer: “Manufacturer0”
Serial: “SerNum0”
Asset Tag: “AssetTagNum0”
Part Number: “PartNum0”
Memory Array: #53
Form Factor: 0x09 (DIMM)
Type: 0x13 (Other)
Type Detail: 0x0080 (Synchronous)
Data Width: 72 bits
Size: 2 GB
Speed: 800 MHz
Memory Device Mapping: #56
Memory Device: #55
Array Mapping: #54
Row: 1
Interleave Pos: 0
Interleaved Depth: 0
Start Address: 0x00000000
End Address: 0x80000000
Memory Device: #57
Location: “DIMM_B1”
Bank: “BANK1”
Manufacturer: “Manufacturer1”
Serial: “SerNum1”
Asset Tag: “AssetTagNum1”
Part Number: “PartNum1”
Memory Array: #53
Form Factor: 0x09 (DIMM)
Type: 0x13 (Other)
Type Detail: 0x0080 (Synchronous)
Data Width: 72 bits
Size: 2 GB
Speed: 800 MHz
Memory Device Mapping: #58
Memory Device: #57
Array Mapping: #54
Row: 1
Interleave Pos: 0
Interleaved Depth: 0
Start Address: 0x0000000080000000
End Address: 0x0000000100000000
Memory Device: #59
Location: “DIMM_A2”
Bank: “BANK2”
Manufacturer: “Manufacturer2”
Serial: “SerNum2”
Asset Tag: “AssetTagNum2”
Part Number: “PartNum2”
Memory Array: #53
Form Factor: 0x09 (DIMM)
Type: 0x13 (Other)
Type Detail: 0x0080 (Synchronous)
Data Width: 72 bits
Size: 2 GB
Speed: 800 MHz
Memory Device Mapping: #60
Memory Device: #59
Array Mapping: #54
Row: 1
Interleave Pos: 0
Interleaved Depth: 0
Start Address: 0x0000000100000000
End Address: 0x0000000180000000
Memory Device: #61
Location: “DIMM_B2”
Bank: “BANK3”
Manufacturer: “Manufacturer3”
Serial: “SerNum3”
Asset Tag: “AssetTagNum3”
Part Number: “PartNum3”
Memory Array: #53
Form Factor: 0x09 (DIMM)
Type: 0x13 (Other)
Type Detail: 0x0080 (Synchronous)
Data Width: 72 bits
Size: 2 GB
Speed: 800 MHz
Memory Device Mapping: #62
Memory Device: #61
Array Mapping: #54
Row: 1
Interleave Pos: 0
Interleaved Depth: 0
Start Address: 0x0000000180000000
End Address: 0x0000000200000000
Type 32 Record: #63
Data 00: 20 14 3f 00 00 00 00 00 00 00 00 00 00 00 00 00
Data 10: 00 00 00 00
Config Status: cfg=no, avail=yes, need=no, active=unknown

04: None 00.0: 10107 System
[Created at sys.63]
Unique ID: rdCR.n_7QNeEnh23
Hardware Class: system
Model: “System”
Formfactor: “desktop”
Driver Info #0:
Driver Status: thermal,fan are active
Driver Activation Cmd: “modprobe thermal; modprobe fan”
Config Status: cfg=no, avail=yes, need=no, active=unknown

05: None 00.0: 10104 FPU
[Created at misc.192]
Unique ID: rdCR.EMpH5pjcahD
Hardware Class: unknown
Model: “FPU”
I/O Ports: 0xf0-0xff (rw)
Config Status: cfg=new, avail=yes, need=no, active=unknown

06: None 00.0: 0801 DMA controller (8237)
[Created at misc.206]
Unique ID: rdCR.f5u1ucRm+H9
Hardware Class: unknown
Model: “DMA controller”
I/O Ports: 0x00-0x1f (rw)
I/O Ports: 0xc0-0xdf (rw)
I/O Ports: 0x80-0x8f (rw)
DMA: 4
Config Status: cfg=new, avail=yes, need=no, active=unknown

07: None 00.0: 0800 PIC (8259)
[Created at misc.219]
Unique ID: rdCR.8uRK7LxiIA2
Hardware Class: unknown
Model: “PIC”
I/O Ports: 0x20-0x21 (rw)
I/O Ports: 0xa0-0xa1 (rw)
Config Status: cfg=new, avail=yes, need=no, active=unknown

08: None 00.0: 0802 Timer (8254)
[Created at misc.230]
Unique ID: rdCR.AJKleuxpiP0
Hardware Class: unknown
Model: “Timer”
IRQ: 0 (258 events)
Config Status: cfg=new, avail=yes, need=no, active=unknown

09: None 00.0: 0900 Keyboard controller
[Created at misc.251]
Unique ID: rdCR.9N+EecqykME
Hardware Class: unknown
Model: “Keyboard controller”
I/O Port: 0x60 (rw)
I/O Port: 0x64 (rw)
Config Status: cfg=new, avail=yes, need=no, active=unknown

10: None 00.0: 10400 PS/2 Controller
[Created at misc.304]
Unique ID: rdCR.DziBbWO85o5
Hardware Class: unknown
Model: “PS/2 Controller”
Config Status: cfg=new, avail=yes, need=no, active=unknown

15: None 00.0: 10102 Main Memory
[Created at memory.61]
Unique ID: rdCR.CxwsZFjVASF
Hardware Class: memory
Model: “Main Memory”
Memory Range: 0x00000000-0x1f361afff (rw)
Memory Size: 8 GB
Config Status: cfg=no, avail=yes, need=no, active=unknown

16: PCI 00.0: 0600 Host bridge
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_5957
Unique ID: qLht.UormufgwvT7
SysFS ID: /devices/pci0000:00/0000:00:00.0
SysFS BusID: 0000:00:00.0
Hardware Class: bridge
Model: “ATI RX780/RX790 Chipset Host Bridge”
Vendor: pci 0x1002 “ATI Technologies Inc”
Device: pci 0x5957 “RX780/RX790 Chipset Host Bridge”
SubVendor: pci 0x1002 “ATI Technologies Inc”
SubDevice: pci 0x5957
Memory Range: 0x00000000-0x1fffffff (rw,non-prefetchable)
Module Alias: “pci:v00001002d00005957sv00001002sd00005957bc06sc00i00”
Config Status: cfg=no, avail=yes, need=no, active=unknown

17: PCI 02.0: 0604 PCI bridge (Normal decode)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_5978
Unique ID: _Znp.NfWwNi5KJ96
SysFS ID: /devices/pci0000:00/0000:00:02.0
SysFS BusID: 0000:00:02.0
Hardware Class: bridge
Model: “ATI RD790 PCI to PCI bridge (external gfx0 port A)”
Vendor: pci 0x1002 “ATI Technologies Inc”
Device: pci 0x5978 “RD790 PCI to PCI bridge (external gfx0 port A)”
Driver: “pcieport-driver”
IRQ: 4351 (no events)
Module Alias: “pci:v00001002d00005978sv00000000sd00000000bc06sc04i00”
Driver Info #0:
Driver Status: shpchp is not active
Driver Activation Cmd: “modprobe shpchp”
Config Status: cfg=no, avail=yes, need=no, active=unknown

18: PCI 12.0: 0106 SATA controller (AHCI 1.0)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_4380
Unique ID: CLZK.aKJnEV+fDUD
SysFS ID: /devices/pci0000:00/0000:00:12.0
SysFS BusID: 0000:00:12.0
Hardware Class: storage
Model: “ATI SB600 Non-Raid-5 SATA”
Vendor: pci 0x1002 “ATI Technologies Inc”
Device: pci 0x4380 “SB600 Non-Raid-5 SATA”
SubVendor: pci 0x1043 “ASUSTeK Computer Inc.”
SubDevice: pci 0x81ef
Driver: “ahci”
Driver Modules: “ahci”
I/O Ports: 0xc000-0xc007 (rw)
I/O Ports: 0xb000-0xb003 (rw)
I/O Ports: 0xa000-0xa007 (rw)
I/O Ports: 0x9000-0x9003 (rw)
I/O Ports: 0x8000-0x800f (rw)
Memory Range: 0xf3fff800-0xf3fffbff (rw,non-prefetchable)
IRQ: 22 (182780 events)
Module Alias: “pci:v00001002d00004380sv00001043sd000081EFbc01sc06i01”
Driver Info #0:
Driver Status: ahci is active
Driver Activation Cmd: “modprobe ahci”
Config Status: cfg=no, avail=yes, need=no, active=unknown

19: PCI 13.0: 0c03 USB Controller (OHCI)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_4387
Unique ID: HSco.2l7UslMApiB
SysFS ID: /devices/pci0000:00/0000:00:13.0
SysFS BusID: 0000:00:13.0
Hardware Class: usb controller
Model: “ATI SB600 USB (OHCI0)”
Vendor: pci 0x1002 “ATI Technologies Inc”
Device: pci 0x4387 “SB600 USB (OHCI0)”
SubVendor: pci 0x1043 “ASUSTeK Computer Inc.”
SubDevice: pci 0x81ef
Driver: “ohci_hcd”
Driver Modules: “ohci_hcd”
Memory Range: 0xf3ffe000-0xf3ffefff (rw,non-prefetchable)
IRQ: 16 (6469 events)
Module Alias: “pci:v00001002d00004387sv00001043sd000081EFbc0Csc03i10”
Driver Info #0:
Driver Status: ohci-hcd is active
Driver Activation Cmd: “modprobe ohci-hcd”
Config Status: cfg=no, avail=yes, need=no, active=unknown

20: PCI 13.1: 0c03 USB Controller (OHCI)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_4388
Unique ID: 9n5e.Z94ELKUtK5C
SysFS ID: /devices/pci0000:00/0000:00:13.1
SysFS BusID: 0000:00:13.1
Hardware Class: usb controller
Model: “ATI SB600 USB (OHCI1)”
Vendor: pci 0x1002 “ATI Technologies Inc”
Device: pci 0x4388 “SB600 USB (OHCI1)”
SubVendor: pci 0x1043 “ASUSTeK Computer Inc.”
SubDevice: pci 0x81ef
Driver: “ohci_hcd”
Driver Modules: “ohci_hcd”
Memory Range: 0xf3ffd000-0xf3ffdfff (rw,non-prefetchable)
IRQ: 17 (5 events)
Module Alias: “pci:v00001002d00004388sv00001043sd000081EFbc0Csc03i10”
Driver Info #0:
Driver Status: ohci-hcd is active
Driver Activation Cmd: “modprobe ohci-hcd”
Config Status: cfg=no, avail=yes, need=no, active=unknown

21: PCI 13.2: 0c03 USB Controller (OHCI)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_4389
Unique ID: 06bT.4a0_pubasTC
SysFS ID: /devices/pci0000:00/0000:00:13.2
SysFS BusID: 0000:00:13.2
Hardware Class: usb controller
Model: “ATI SB600 USB (OHCI2)”
Vendor: pci 0x1002 “ATI Technologies Inc”
Device: pci 0x4389 “SB600 USB (OHCI2)”
SubVendor: pci 0x1043 “ASUSTeK Computer Inc.”
SubDevice: pci 0x81ef
Driver: “ohci_hcd”
Driver Modules: “ohci_hcd”
Memory Range: 0xf3ffc000-0xf3ffcfff (rw,non-prefetchable)
IRQ: 18 (1561447 events)
Module Alias: “pci:v00001002d00004389sv00001043sd000081EFbc0Csc03i10”
Driver Info #0:
Driver Status: ohci-hcd is active
Driver Activation Cmd: “modprobe ohci-hcd”
Config Status: cfg=no, avail=yes, need=no, active=unknown

22: PCI 13.3: 0c03 USB Controller (OHCI)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_438a
Unique ID: tQ4J.b_yjITjHOsC
SysFS ID: /devices/pci0000:00/0000:00:13.3
SysFS BusID: 0000:00:13.3
Hardware Class: usb controller
Model: “ATI SB600 USB (OHCI3)”
Vendor: pci 0x1002 “ATI Technologies Inc”
Device: pci 0x438a “SB600 USB (OHCI3)”
SubVendor: pci 0x1043 “ASUSTeK Computer Inc.”
SubDevice: pci 0x81ef
Driver: “ohci_hcd”
Driver Modules: “ohci_hcd”
Memory Range: 0xf3ffb000-0xf3ffbfff (rw,non-prefetchable)
IRQ: 17 (5 events)
Module Alias: “pci:v00001002d0000438Asv00001043sd000081EFbc0Csc03i10”
Driver Info #0:
Driver Status: ohci-hcd is active
Driver Activation Cmd: “modprobe ohci-hcd”
Config Status: cfg=no, avail=yes, need=no, active=unknown

23: PCI 13.4: 0c03 USB Controller (OHCI)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_438b
Unique ID: llZ8.6PvTn1r_vED
SysFS ID: /devices/pci0000:00/0000:00:13.4
SysFS BusID: 0000:00:13.4
Hardware Class: usb controller
Model: “ATI SB600 USB (OHCI4)”
Vendor: pci 0x1002 “ATI Technologies Inc”
Device: pci 0x438b “SB600 USB (OHCI4)”
SubVendor: pci 0x1043 “ASUSTeK Computer Inc.”
SubDevice: pci 0x81ef
Driver: “ohci_hcd”
Driver Modules: “ohci_hcd”
Memory Range: 0xf3ffa000-0xf3ffafff (rw,non-prefetchable)
IRQ: 18 (1561447 events)
Module Alias: “pci:v00001002d0000438Bsv00001043sd000081EFbc0Csc03i10”
Driver Info #0:
Driver Status: ohci-hcd is active
Driver Activation Cmd: “modprobe ohci-hcd”
Config Status: cfg=no, avail=yes, need=no, active=unknown

24: PCI 13.5: 0c03 USB Controller (EHCI)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_4386
Unique ID: c43_.nK_pWh6dvT1
SysFS ID: /devices/pci0000:00/0000:00:13.5
SysFS BusID: 0000:00:13.5
Hardware Class: usb controller
Model: “ATI SB600 USB Controller (EHCI)”
Vendor: pci 0x1002 “ATI Technologies Inc”
Device: pci 0x4386 “SB600 USB Controller (EHCI)”
SubVendor: pci 0x1043 “ASUSTeK Computer Inc.”
SubDevice: pci 0x81ef
Driver: “ehci_hcd”
Driver Modules: “ehci_hcd”
Memory Range: 0xf3fff000-0xf3fff0ff (rw,non-prefetchable)
IRQ: 19 (2072 events)
Module Alias: “pci:v00001002d00004386sv00001043sd000081EFbc0Csc03i20”
Driver Info #0:
Driver Status: ehci-hcd is active
Driver Activation Cmd: “modprobe ehci-hcd”
Config Status: cfg=no, avail=yes, need=no, active=unknown

25: PCI 14.0: 0c05 SMBus
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_4385
Unique ID: MZfG.6lm_EvE5STB
SysFS ID: /devices/pci0000:00/0000:00:14.0
SysFS BusID: 0000:00:14.0
Hardware Class: unknown
Model: “ATI SBx00 SMBus Controller”
Vendor: pci 0x1002 “ATI Technologies Inc”
Device: pci 0x4385 “SBx00 SMBus Controller”
SubVendor: pci 0x1043 “ASUSTeK Computer Inc.”
SubDevice: pci 0x81ef
Revision: 0x14
Driver: “piix4_smbus”
Driver Modules: “i2c_piix4”
I/O Ports: 0xb00-0xb0f (rw)
Module Alias: “pci:v00001002d00004385sv00001043sd000081EFbc0Csc05i00”
Driver Info #0:
Driver Status: i2c_piix4 is active
Driver Activation Cmd: “modprobe i2c_piix4”
Config Status: cfg=no, avail=yes, need=no, active=unknown

26: PCI 14.1: 0101 IDE interface
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_438c
Unique ID: Eu86.Kz33gTZHq45
SysFS ID: /devices/pci0000:00/0000:00:14.1
SysFS BusID: 0000:00:14.1
Hardware Class: storage
Model: “ATI SB600 IDE”
Vendor: pci 0x1002 “ATI Technologies Inc”
Device: pci 0x438c “SB600 IDE”
SubVendor: pci 0x1043 “ASUSTeK Computer Inc.”
SubDevice: pci 0x81ef
Driver: “pata_atiixp”
Driver Modules: “pata_atiixp”
I/O Ports: 0x1f0-0x1f7 (rw)
I/O Port: 0x3f6 (rw)
I/O Ports: 0x170-0x177 (rw)
I/O Port: 0x376 (rw)
I/O Ports: 0xff00-0xff0f (rw)
IRQ: 16 (6469 events)
Module Alias: “pci:v00001002d0000438Csv00001043sd000081EFbc01sc01i8a”
Driver Info #0:
Driver Status: pata_atiixp is active
Driver Activation Cmd: “modprobe pata_atiixp”
Driver Info #1:
Driver Status: atiixp is active
Driver Activation Cmd: “modprobe atiixp”
Driver Info #2:
Driver Status: pata_acpi is not active
Driver Activation Cmd: “modprobe pata_acpi”
Driver Info #3:
Driver Status: ata_generic is active
Driver Activation Cmd: “modprobe ata_generic”
Driver Info #4:
Driver Status: ide_pci_generic is active
Driver Activation Cmd: “modprobe ide_pci_generic”
Config Status: cfg=no, avail=yes, need=no, active=unknown

27: PCI 14.2: 0403 Audio device
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_4383
Unique ID: 5Dex.RJQwAkMqg49
SysFS ID: /devices/pci0000:00/0000:00:14.2
SysFS BusID: 0000:00:14.2
Hardware Class: sound
Model: “ATI SBx00 Azalia (Intel HDA)”
Vendor: pci 0x1002 “ATI Technologies Inc”
Device: pci 0x4383 “SBx00 Azalia (Intel HDA)”
SubVendor: pci 0x1043 “ASUSTeK Computer Inc.”
SubDevice: pci 0x82bb
Driver: “HDA Intel”
Driver Modules: “snd_hda_intel”
Memory Range: 0xf3ff4000-0xf3ff7fff (rw,non-prefetchable)
IRQ: 16 (6469 events)
Module Alias: “pci:v00001002d00004383sv00001043sd000082BBbc04sc03i00”
Driver Info #0:
Driver Status: snd_hda_intel is active
Driver Activation Cmd: “modprobe snd_hda_intel”
Config Status: cfg=no, avail=yes, need=no, active=unknown

28: PCI 14.3: 0601 ISA bridge
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_438d
Unique ID: yX7n.munz_P4C0w7
SysFS ID: /devices/pci0000:00/0000:00:14.3
SysFS BusID: 0000:00:14.3
Hardware Class: bridge
Model: “ATI SB600 PCI to LPC Bridge”
Vendor: pci 0x1002 “ATI Technologies Inc”
Device: pci 0x438d “SB600 PCI to LPC Bridge”
SubVendor: pci 0x1043 “ASUSTeK Computer Inc.”
SubDevice: pci 0x81ef
Module Alias: “pci:v00001002d0000438Dsv00001043sd000081EFbc06sc01i00”
Config Status: cfg=no, avail=yes, need=no, active=unknown

29: PCI 14.4: 0604 PCI bridge (Subtractive decode)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_4384
Unique ID: qscc.ULOo3yhA66C
SysFS ID: /devices/pci0000:00/0000:00:14.4
SysFS BusID: 0000:00:14.4
Hardware Class: bridge
Model: “ATI SBx00 PCI to PCI Bridge”
Vendor: pci 0x1002 “ATI Technologies Inc”
Device: pci 0x4384 “SBx00 PCI to PCI Bridge”
Module Alias: “pci:v00001002d00004384sv00000000sd00000000bc06sc04i01”
Config Status: cfg=no, avail=yes, need=no, active=unknown

30: PCI 18.0: 0600 Host bridge
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1022_1200
Unique ID: fiDB.SGHF3QZh3Y9
SysFS ID: /devices/pci0000:00/0000:00:18.0
SysFS BusID: 0000:00:18.0
Hardware Class: bridge
Model: “AMD Family 10h [Opteron, Athlon64, Sempron] HyperTransport
Configuration”
Vendor: pci 0x1022 “AMD”
Device: pci 0x1200 “Family 10h [Opteron, Athlon64, Sempron]
HyperTransport Configuration”
Module Alias: “pci:v00001022d00001200sv00000000sd00000000bc06sc00i00”
Config Status: cfg=no, avail=yes, need=no, active=unknown

31: PCI 18.1: 0600 Host bridge
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1022_1201
Unique ID: W1j0.zgD+X_gObw9
SysFS ID: /devices/pci0000:00/0000:00:18.1
SysFS BusID: 0000:00:18.1
Hardware Class: bridge
Model: “AMD Family 10h [Opteron, Athlon64, Sempron] Address Map”
Vendor: pci 0x1022 “AMD”
Device: pci 0x1201 “Family 10h [Opteron, Athlon64, Sempron] Address Map”
Module Alias: “pci:v00001022d00001201sv00000000sd00000000bc06sc00i00”
Config Status: cfg=no, avail=yes, need=no, active=unknown

32: PCI 18.2: 0600 Host bridge
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1022_1202
Unique ID: OMCs.U5Al0Zo57JA
SysFS ID: /devices/pci0000:00/0000:00:18.2
SysFS BusID: 0000:00:18.2
Hardware Class: bridge
Model: “AMD Family 10h [Opteron, Athlon64, Sempron] DRAM Controller”
Vendor: pci 0x1022 “AMD”
Device: pci 0x1202 “Family 10h [Opteron, Athlon64, Sempron] DRAM
Controller”
Module Alias: “pci:v00001022d00001202sv00000000sd00000000bc06sc00i00”
Config Status: cfg=no, avail=yes, need=no, active=unknown

33: PCI 18.3: 0600 Host bridge
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1022_1203
Unique ID: Fhhh.+V6VV7woehA
SysFS ID: /devices/pci0000:00/0000:00:18.3
SysFS BusID: 0000:00:18.3
Hardware Class: bridge
Model: “AMD Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control”
Vendor: pci 0x1022 “AMD”
Device: pci 0x1203 “Family 10h [Opteron, Athlon64, Sempron]
Miscellaneous Control”
Module Alias: “pci:v00001022d00001203sv00000000sd00000000bc06sc00i00”
Config Status: cfg=no, avail=yes, need=no, active=unknown

34: PCI 18.4: 0600 Host bridge
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1022_1204
Unique ID: 60BX.Ww2F_h1WA4B
SysFS ID: /devices/pci0000:00/0000:00:18.4
SysFS BusID: 0000:00:18.4
Hardware Class: bridge
Model: “AMD Family 10h [Opteron, Athlon64, Sempron] Link Control”
Vendor: pci 0x1022 “AMD”
Device: pci 0x1204 “Family 10h [Opteron, Athlon64, Sempron] Link Control”
Module Alias: “pci:v00001022d00001204sv00000000sd00000000bc06sc00i00”
Config Status: cfg=no, avail=yes, need=no, active=unknown

35: PCI 100.0: 0300 VGA compatible controller (VGA)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_10de_421
Unique ID: VCu0.vVoJzDgPiL5
Parent ID: _Znp.NfWwNi5KJ96
SysFS ID: /devices/pci0000:00/0000:00:02.0/0000:01:00.0
SysFS BusID: 0000:01:00.0
Hardware Class: graphics card
Model: “nVidia GeForce 8500 GT”
Vendor: pci 0x10de “nVidia Corporation”
Device: pci 0x0421 “GeForce 8500 GT”
SubVendor: pci 0x19f1
SubDevice: pci 0x0616
Revision: 0xa1
Driver: “nvidia”
Driver Modules: “nvidia”
Memory Range: 0xf7000000-0xf7ffffff (rw,non-prefetchable)
Memory Range: 0xc0000000-0xdfffffff (rw,prefetchable)
Memory Range: 0xf4000000-0xf5ffffff (rw,non-prefetchable)
I/O Ports: 0xd800-0xd87f (rw)
Memory Range: 0xf6fe0000-0xf6ffffff (ro,prefetchable,disabled)
IRQ: 18 (1561447 events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: “pci:v000010DEd00000421sv000019F1sd00000616bc03sc00i00”
Driver Info #0:
XFree86 v4 Server Module: nvidia
Driver Info #1:
XFree86 v4 Server Module: nvidia
3D Support: yes
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #17 (PCI bridge)

36: PCI 205.0: 0200 Ethernet controller
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_10ec_8139
Unique ID: rBUF.dpY3gSFYst5
Parent ID: qscc.ULOo3yhA66C
SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:02:05.0
SysFS BusID: 0000:02:05.0
Hardware Class: network
Model: “Realtek RTL-8139/8139C/8139C+”
Vendor: pci 0x10ec “Realtek Semiconductor Co., Ltd.”
Device: pci 0x8139 “RTL-8139/8139C/8139C+”
SubVendor: pci 0x1259 “Allied Telesyn International”
SubDevice: pci 0xc10f
Revision: 0x10
Driver: “8139too”
Driver Modules: “8139too”
Device File: eth0
I/O Ports: 0xe800-0xe8ff (rw)
Memory Range: 0xfebffc00-0xfebffcff (rw,non-prefetchable)
IRQ: 20 (6635050 events)
HW Address: 00:18:e7:18:38:8c
Link detected: yes
Module Alias: “pci:v000010ECd00008139sv00001259sd0000C10Fbc02sc00i00”
Driver Info #0:
Driver Status: 8139too is active
Driver Activation Cmd: “modprobe 8139too”
Driver Info #1:
Driver Status: 8139cp is active
Driver Activation Cmd: “modprobe 8139cp”
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #29 (PCI bridge)

37: PCI 206.0: 0400 Multimedia video controller
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_14f1_5b7a
Unique ID: ejN_.22A7bFHnK65
Parent ID: qscc.ULOo3yhA66C
SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:02:06.0
SysFS BusID: 0000:02:06.0
Hardware Class: graphics card
Model: “Hauppauge computer works WinTV HVR-1600”
Vendor: pci 0x14f1 “Conexant Systems, Inc.”
Device: pci 0x5b7a “CX23418 Single-Chip MPEG-2 Encoder with Integrated
Analog Video/Broadcast Audio Decoder”
SubVendor: pci 0x0070 “Hauppauge computer works Inc.”
SubDevice: pci 0x7444 “WinTV HVR-1600”
Driver: “cx18”
Driver Modules: “cx18”
Memory Range: 0xf8000000-0xfbffffff (rw,non-prefetchable)
IRQ: 21 (2 events)
Module Alias: “pci:v000014F1d00005B7Asv00000070sd00007444bc04sc00i00”
Driver Info #0:
Driver Status: cx18 is active
Driver Activation Cmd: “modprobe cx18”
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #29 (PCI bridge)

38: PCI 207.0: 0c00 FireWire (IEEE 1394) (OHCI)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1106_3044
Unique ID: jqQS.CePJf9moaA8
Parent ID: qscc.ULOo3yhA66C
SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:02:07.0
SysFS BusID: 0000:02:07.0
Hardware Class: firewire controller
Model: “VIA VT6306 Fire II IEEE 1394 OHCI Link Layer Controller”
Vendor: pci 0x1106 “VIA Technologies, Inc.”
Device: pci 0x3044 “VT6306 Fire II IEEE 1394 OHCI Link Layer Controller”
SubVendor: pci 0x1106 “VIA Technologies, Inc.”
SubDevice: pci 0x3044
Revision: 0x46
Driver: “ohci1394”
Driver Modules: “ohci1394”
Memory Range: 0xfebff000-0xfebff7ff (rw,non-prefetchable)
I/O Ports: 0xe400-0xe47f (rw)
IRQ: 22 (182780 events)
Module Alias: “pci:v00001106d00003044sv00001106sd00003044bc0Csc00i10”
Driver Info #0:
Driver Status: ohci1394 is active
Driver Activation Cmd: “modprobe ohci1394”
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #29 (PCI bridge)

39: None 00.0: 0700 Serial controller (16550)
[Created at serial.74]
UDI: /org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0
Unique ID: S_Uw.3fyvFV+mbWD
Hardware Class: unknown
Model: “16550A”
Device: “16550A”
Device File: /dev/ttyS0
I/O Ports: 0x3f8-0x3ff (rw)
IRQ: 4 (28 events)
Config Status: cfg=new, avail=yes, need=no, active=unknown

40: IDE 00.0: 10600 Disk
[Created at block.243]
UDI:
/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD502IJS13TJ1NQA03028
Unique ID: 3OOL.sa6BTBaReb0
Parent ID: CLZK.aKJnEV+fDUD
SysFS ID: /class/block/sda
SysFS BusID: 0:0:0:0
SysFS Device Link:
/devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0
Hardware Class: disk
Model: “SAMSUNG HD502IJ”
Vendor: “SAMSUNG”
Device: “HD502IJ”
Revision: “1AA0”
Serial ID: “S13TJ1NQA03028”
Driver: “ahci”, “sd”
Driver Modules: “ahci”
Device File: /dev/sda
Device Files: /dev/sda,
/dev/disk/by-id/scsi-SATA_SAMSUNG_HD502IJS13TJ1NQA03028,
/dev/disk/by-id/ata-SAMSUNG_HD502IJ_S13TJ1NQA03028,
/dev/disk/by-path/pci-0000:00:12.0-scsi-0:0:0:0,
/dev/disk/by-id/edd-int13_dev80
Device Number: block 8:0-8:15
BIOS id: 0x80
Geometry (Logical): CHS 60801/255/63
Size: 976773168 sectors a 512 bytes
Geometry (BIOS EDD): CHS 969021/16/63
Size (BIOS EDD): 976773168 sectors
Geometry (BIOS Legacy): CHS 1024/255/63
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #18 (SATA controller)

41: None 00.0: 11300 Partition
[Created at block.412]
UDI: /org/freedesktop/Hal/devices/volume_uuid_9CC0345CC0343EB8
Unique ID: bdUI.SE1wIdpsiiC
Parent ID: 3OOL.sa6BTBaReb0
SysFS ID: /class/block/sda/sda1
Hardware Class: partition
Model: “Partition”
Device File: /dev/sda1
Device Files: /dev/sda1,
/dev/disk/by-id/scsi-SATA_SAMSUNG_HD502IJS13TJ1NQA03028-part1,
/dev/disk/by-id/ata-SAMSUNG_HD502IJ_S13TJ1NQA03028-part1,
/dev/disk/by-path/pci-0000:00:12.0-scsi-0:0:0:0-part1,
/dev/disk/by-uuid/9CC0345CC0343EB8, /dev/disk/by-label/XP64-SYSTEM,
/dev/disk/by-id/edd-int13_dev80-part1
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #40 (Disk)

42: None 00.0: 11300 Partition
[Created at block.412]
UDI: /org/freedesktop/Hal/devices/volume_uuid_C880EB8C80EB7F76
Unique ID: 2pkM.SE1wIdpsiiC
Parent ID: 3OOL.sa6BTBaReb0
SysFS ID: /class/block/sda/sda2
Hardware Class: partition
Model: “Partition”
Device File: /dev/sda2
Device Files: /dev/sda2,
/dev/disk/by-id/scsi-SATA_SAMSUNG_HD502IJS13TJ1NQA03028-part2,
/dev/disk/by-id/ata-SAMSUNG_HD502IJ_S13TJ1NQA03028-part2,
/dev/disk/by-path/pci-0000:00:12.0-scsi-0:0:0:0-part2,
/dev/disk/by-uuid/C880EB8C80EB7F76, /dev/disk/by-label/VISTA-SYSTEM,
/dev/disk/by-id/edd-int13_dev80-part2
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #40 (Disk)

43: None 00.0: 11300 Partition
[Created at block.412]
UDI: /org/freedesktop/Hal/devices/volume_part3_size_1024
Unique ID: W__Q.SE1wIdpsiiC
Parent ID: 3OOL.sa6BTBaReb0
SysFS ID: /class/block/sda/sda3
Hardware Class: partition
Model: “Partition”
Device File: /dev/sda3
Device Files: /dev/sda3,
/dev/disk/by-id/scsi-SATA_SAMSUNG_HD502IJS13TJ1NQA03028-part3,
/dev/disk/by-id/ata-SAMSUNG_HD502IJ_S13TJ1NQA03028-part3,
/dev/disk/by-path/pci-0000:00:12.0-scsi-0:0:0:0-part3,
/dev/disk/by-id/edd-int13_dev80-part3
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #40 (Disk)

44: None 00.0: 11300 Partition
[Created at block.412]
UDI: /org/freedesktop/Hal/devices/volume_uuid_660061A0006177C7
Unique ID: QLVZ.SE1wIdpsiiC
Parent ID: 3OOL.sa6BTBaReb0
SysFS ID: /class/block/sda/sda5
Hardware Class: partition
Model: “Partition”
Device File: /dev/sda5
Device Files: /dev/sda5,
/dev/disk/by-id/scsi-SATA_SAMSUNG_HD502IJS13TJ1NQA03028-part5,
/dev/disk/by-id/ata-SAMSUNG_HD502IJ_S13TJ1NQA03028-part5,
/dev/disk/by-path/pci-0000:00:12.0-scsi-0:0:0:0-part5,
/dev/disk/by-uuid/660061A0006177C7, /dev/disk/by-label/Storage,
/dev/disk/by-id/edd-int13_dev80-part5
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #40 (Disk)

45: None 00.0: 11300 Partition
[Created at block.412]
UDI:
/org/freedesktop/Hal/devices/volume_uuid_da5419b4_3301_45ca_96b7_8d4d4a0c1c4e
Unique ID: tWld.SE1wIdpsiiC
Parent ID: 3OOL.sa6BTBaReb0
SysFS ID: /class/block/sda/sda6
Hardware Class: partition
Model: “Partition”
Device File: /dev/sda6
Device Files: /dev/sda6,
/dev/disk/by-id/scsi-SATA_SAMSUNG_HD502IJS13TJ1NQA03028-part6,
/dev/disk/by-id/ata-SAMSUNG_HD502IJ_S13TJ1NQA03028-part6,
/dev/disk/by-path/pci-0000:00:12.0-scsi-0:0:0:0-part6,
/dev/disk/by-uuid/da5419b4-3301-45ca-96b7-8d4d4a0c1c4e,
/dev/disk/by-id/edd-int13_dev80-part6
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #40 (Disk)

46: None 00.0: 11300 Partition
[Created at block.412]
UDI:
/org/freedesktop/Hal/devices/volume_uuid_96f80fac_d5ad_4ed8_b8fc_7cf7c4016bce
Unique ID: Zzw6.SE1wIdpsiiC
Parent ID: 3OOL.sa6BTBaReb0
SysFS ID: /class/block/sda/sda7
Hardware Class: partition
Model: “Partition”
Device File: /dev/sda7
Device Files: /dev/sda7, /dev/root,
/dev/disk/by-id/scsi-SATA_SAMSUNG_HD502IJS13TJ1NQA03028-part7,
/dev/disk/by-id/ata-SAMSUNG_HD502IJ_S13TJ1NQA03028-part7,
/dev/disk/by-path/pci-0000:00:12.0-scsi-0:0:0:0-part7,
/dev/disk/by-uuid/96f80fac-d5ad-4ed8-b8fc-7cf7c4016bce,
/dev/disk/by-id/edd-int13_dev80-part7
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #40 (Disk)

47: None 00.0: 11300 Partition
[Created at block.412]
UDI:
/org/freedesktop/Hal/devices/volume_uuid_11402437_3594_4075_b3f1_25d8fd575317
Unique ID: 09BB.SE1wIdpsiiC
Parent ID: 3OOL.sa6BTBaReb0
SysFS ID: /class/block/sda/sda8
Hardware Class: partition
Model: “Partition”
Device File: /dev/sda8
Device Files: /dev/sda8,
/dev/disk/by-id/scsi-SATA_SAMSUNG_HD502IJS13TJ1NQA03028-part8,
/dev/disk/by-id/ata-SAMSUNG_HD502IJ_S13TJ1NQA03028-part8,
/dev/disk/by-path/pci-0000:00:12.0-scsi-0:0:0:0-part8,
/dev/disk/by-uuid/11402437-3594-4075-b3f1-25d8fd575317,
/dev/disk/by-id/edd-int13_dev80-part8
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #40 (Disk)

48: SCSI 400.0: 10602 CD-ROM (DVD)
[Created at block.247]
UDI: /org/freedesktop/Hal/devices/storage_model_DVD_RW_DRU_180A
Unique ID: KD9E.pKEJgLfvq9E
Parent ID: Eu86.Kz33gTZHq45
SysFS ID: /class/block/sr0
SysFS BusID: 4:0:0:0
SysFS Device Link:
/devices/pci0000:00/0000:00:14.1/host4/target4:0:0/4:0:0:0
Hardware Class: cdrom
Model: “SONY DVD RW DRU-180A”
Vendor: “SONY”
Device: “DVD RW DRU-180A”
Revision: “1.63”
Driver: “pata_atiixp”, “sr”
Driver Modules: “pata_atiixp”
Device File: /dev/sr0 (/dev/sg1)
Device Files: /dev/sr0, /dev/scd0,
/dev/disk/by-path/pci-0000:00:14.1-scsi-0:0:0:0, /dev/cdrom, /dev/cdrw,
/dev/dvd, /dev/dvdrw
Device Number: block 11:0 (char 21:1)
Features: CD-R, CD-RW, DVD, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+DL, DVDRAM
Drive status: no medium
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #26 (IDE interface)
Drive Speed: 12

49: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_0_if0
Unique ID: k4bc.erpEvbsFWX1
Parent ID: HSco.2l7UslMApiB
SysFS ID: /devices/pci0000:00/0000:00:13.0/usb1/1-0:1.0
SysFS BusID: 1-0:1.0
Hardware Class: hub
Model: “Linux 2.6.27.7-9-default ohci_hcd OHCI Host Controller”
Hotplug: USB
Vendor: usb 0x1d6b “Linux 2.6.27.7-9-default ohci_hcd”
Device: usb 0x0001 “OHCI Host Controller”
Revision: “2.06”
Serial ID: “0000:00:13.0”
Driver: “hub”
Driver Modules: “usbcore”
Speed: 12 Mbps
Module Alias: “usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00”
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: “modprobe usbcore”
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #19 (USB Controller)

50: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_1_if0
Unique ID: pBe4.PaupGMfzSp8
Parent ID: 9n5e.Z94ELKUtK5C
SysFS ID: /devices/pci0000:00/0000:00:13.1/usb2/2-0:1.0
SysFS BusID: 2-0:1.0
Hardware Class: hub
Model: “Linux 2.6.27.7-9-default ohci_hcd OHCI Host Controller”
Hotplug: USB
Vendor: usb 0x1d6b “Linux 2.6.27.7-9-default ohci_hcd”
Device: usb 0x0001 “OHCI Host Controller”
Revision: “2.06”
Serial ID: “0000:00:13.1”
Driver: “hub”
Driver Modules: “usbcore”
Speed: 12 Mbps
Module Alias: “usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00”
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: “modprobe usbcore”
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #20 (USB Controller)

51: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_2_if0
Unique ID: uIhY.AJzOe6ShP50
Parent ID: 06bT.4a0_pubasTC
SysFS ID: /devices/pci0000:00/0000:00:13.2/usb3/3-0:1.0
SysFS BusID: 3-0:1.0
Hardware Class: hub
Model: “Linux 2.6.27.7-9-default ohci_hcd OHCI Host Controller”
Hotplug: USB
Vendor: usb 0x1d6b “Linux 2.6.27.7-9-default ohci_hcd”
Device: usb 0x0001 “OHCI Host Controller”
Revision: “2.06”
Serial ID: “0000:00:13.2”
Driver: “hub”
Driver Modules: “usbcore”
Speed: 12 Mbps
Module Alias: “usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00”
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: “modprobe usbcore”
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #21 (USB Controller)

52: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_3_if0
Unique ID: zPk0.x12_+sEPMN7
Parent ID: tQ4J.b_yjITjHOsC
SysFS ID: /devices/pci0000:00/0000:00:13.3/usb4/4-0:1.0
SysFS BusID: 4-0:1.0
Hardware Class: hub
Model: “Linux 2.6.27.7-9-default ohci_hcd OHCI Host Controller”
Hotplug: USB
Vendor: usb 0x1d6b “Linux 2.6.27.7-9-default ohci_hcd”
Device: usb 0x0001 “OHCI Host Controller”
Revision: “2.06”
Serial ID: “0000:00:13.3”
Driver: “hub”
Driver Modules: “usbcore”
Speed: 12 Mbps
Module Alias: “usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00”
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: “modprobe usbcore”
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #22 (USB Controller)

53: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_4_if0
Unique ID: 2XnU.im6ZNd17JfE
Parent ID: llZ8.6PvTn1r_vED
SysFS ID: /devices/pci0000:00/0000:00:13.4/usb5/5-0:1.0
SysFS BusID: 5-0:1.0
Hardware Class: hub
Model: “Linux 2.6.27.7-9-default ohci_hcd OHCI Host Controller”
Hotplug: USB
Vendor: usb 0x1d6b “Linux 2.6.27.7-9-default ohci_hcd”
Device: usb 0x0001 “OHCI Host Controller”
Revision: “2.06”
Serial ID: “0000:00:13.4”
Driver: “hub”
Driver Modules: “usbcore”
Speed: 12 Mbps
Module Alias: “usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00”
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: “modprobe usbcore”
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #23 (USB Controller)

54: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_13_5_if0
Unique ID: 7eqy.MrJLBLcWB9F
Parent ID: c43_.nK_pWh6dvT1
SysFS ID: /devices/pci0000:00/0000:00:13.5/usb6/6-0:1.0
SysFS BusID: 6-0:1.0
Hardware Class: hub
Model: “Linux 2.6.27.7-9-default ehci_hcd EHCI Host Controller”
Hotplug: USB
Vendor: usb 0x1d6b “Linux 2.6.27.7-9-default ehci_hcd”
Device: usb 0x0002 “EHCI Host Controller”
Revision: “2.06”
Serial ID: “0000:00:13.5”
Driver: “hub”
Driver Modules: “usbcore”
Speed: 480 Mbps
Module Alias: “usb:v1D6Bp0002d0206dc09dsc00dp00ic09isc00ip00”
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: “modprobe usbcore”
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #24 (USB Controller)

55: PS/2 00.0: 10800 Keyboard
[Created at input.161]
UDI:
/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input
Unique ID: nLyy.+49ps10DtUF
Hardware Class: keyboard
Model: “AT Translated Set 2 keyboard”
Vendor: 0x0001
Device: 0x0001 “AT Translated Set 2 keyboard”
Compatible to: int 0x0211 0x0001
Device File: /dev/input/event0
Device Files: /dev/input/event0,
/dev/input/by-path/platform-i8042-serio-0-event-kbd
Device Number: char 13:64
Driver Info #0:
XkbRules: xfree86
XkbModel: pc104
Config Status: cfg=no, avail=yes, need=no, active=unknown

56: PS/2 00.0: 10500 PS/2 Mouse
[Created at input.183]
UDI:
/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input
Unique ID: AH6Q.bGO0sOimOM3
Hardware Class: mouse
Model: “ImExPS/2 Logitech Explorer Mouse”
Vendor: 0x0002
Device: 0x0006 “ImExPS/2 Logitech Explorer Mouse”
Compatible to: int 0x0210 0x0025
Device File: /dev/input/mice (/dev/input/mouse0)
Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event1,
/dev/input/by-path/platform-i8042-serio-1-event-mouse,
/dev/input/by-path/platform-i8042-serio-1-mouse
Device Number: char 13:63 (char 13:32)
Driver Info #0:
Buttons: 5
Wheels: 2
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=no, avail=yes, need=no, active=unknown

57: None 00.0: 10103 CPU
[Created at cpu.301]
Unique ID: rdCR.j8NaKXDZtZ6
Hardware Class: cpu
Arch: X86-64
Vendor: “AuthenticAMD”
Model: 16.2.3 “AMD Phenom™ 9750 Quad-Core Processor”
Features:
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,3dnowext,3dnow,constant_tsc,rep_good,nopl,pni,monitor,cx16,popcnt,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,a
Clock: 2400 MHz
BogoMips: 4800.33
Cache: 512 kb
Units/Processor: 4
Config Status: cfg=no, avail=yes, need=no, active=unknown

58: None 01.0: 10103 CPU
[Created at cpu.301]
Unique ID: wkFv.j8NaKXDZtZ6
Hardware Class: cpu
Arch: X86-64
Vendor: “AuthenticAMD”
Model: 16.2.3 “AMD Phenom™ 9750 Quad-Core Processor”
Features:
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,3dnowext,3dnow,constant_tsc,rep_good,nopl,pni,monitor,cx16,popcnt,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,a
Clock: 2400 MHz
BogoMips: 4800.47
Cache: 512 kb
Units/Processor: 4
Config Status: cfg=no, avail=yes, need=no, active=unknown

59: None 02.0: 10103 CPU
[Created at cpu.301]
Unique ID: +rIN.j8NaKXDZtZ6
Hardware Class: cpu
Arch: X86-64
Vendor: “AuthenticAMD”
Model: 16.2.3 “AMD Phenom™ 9750 Quad-Core Processor”
Features:
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,3dnowext,3dnow,constant_tsc,rep_good,nopl,pni,monitor,cx16,popcnt,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,a
Clock: 2400 MHz
BogoMips: 4800.46
Cache: 512 kb
Units/Processor: 4
Config Status: cfg=no, avail=yes, need=no, active=unknown

60: None 03.0: 10103 CPU
[Created at cpu.301]
Unique ID: 4zLr.j8NaKXDZtZ6
Hardware Class: cpu
Arch: X86-64
Vendor: “AuthenticAMD”
Model: 16.2.3 “AMD Phenom™ 9750 Quad-Core Processor”
Features:
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,3dnowext,3dnow,constant_tsc,rep_good,nopl,pni,monitor,cx16,popcnt,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,a
Clock: 2400 MHz
BogoMips: 4800.46
Cache: 512 kb
Units/Processor: 4
Config Status: cfg=no, avail=yes, need=no, active=unknown

61: None 00.0: 10000 Monitor
[Created at fb.71]
Unique ID: rdCR.EY_qmtb9YY0
Hardware Class: monitor
Model: “Generic Monitor”
Vendor: “Generic”
Device: “Monitor”
Resolution: 1600x1200@77Hz
Driver Info #0:
Max. Resolution: 1600x1200
Vert. Sync Range: 50-90 Hz
Hor. Sync Range: 31-96 kHz
Config Status: cfg=no, avail=yes, need=no, active=unknown

62: None 00.0: 10700 Loopback
[Created at net.124]
Unique ID: ZsBS.GQNx7L4uPNA
SysFS ID: /class/net/lo
Hardware Class: network interface
Model: “Loopback network interface”
Device File: lo
Link detected: yes
Config Status: cfg=no, avail=yes, need=no, active=unknown

63: None 00.0: 10701 Ethernet
[Created at net.124]
Unique ID: usDW.ndpeucax6V1
Parent ID: rBUF.dpY3gSFYst5
SysFS ID: /class/net/eth0
SysFS Device Link: /devices/pci0000:00/0000:00:14.4/0000:02:05.0
Hardware Class: network interface
Model: “Ethernet network interface”
Driver: “8139too”
Driver Modules: “8139too”
Device File: eth0
HW Address: 00:18:e7:18:38:8c
Link detected: yes
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #36 (Ethernet controller)
…
>

[user]

ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)

ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)

ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)

ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])

IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23

ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)

ACPI: IRQ0 used by override.

ACPI: IRQ2 used by override.

ACPI: IRQ9 used by override.

ACPI: HPET id: 0x8300 base: 0xfed00000

Using ACPI (MADT) for SMP configuration information

SMP: Allowing 4 CPUs, 0 hotplug CPUs

PM: Registered nosave memory: 000000000009f000 - 00000000000a0000

PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000

PM: Registered nosave memory: 00000000000e4000 - 0000000000100000

PM: Registered nosave memory: 00000000bffb0000 - 00000000bffbe000

PM: Registered nosave memory: 00000000bffbe000 - 00000000bffe0000

PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000

PM: Registered nosave memory: 00000000c0000000 - 00000000fff00000

PM: Registered nosave memory: 00000000fff00000 - 0000000100000000

Allocating PCI resources starting at c4000000 (gap: c0000000:3ff00000)

PERCPU: Allocating 62240 bytes of per cpu data

NR_CPUS: 512, nr_cpu_ids: 4, nr_node_ids 1

Built 1 zonelists in Zone order, mobility grouping on. Total pages:
2057446
Policy zone: Normal

Kernel command line:
root=/dev/disk/by-id/ata-SAMSUNG_HD502IJ_S13TJ1NQA03028-part7
resume=/dev/disk/by-id/ata-SAMSUNG_HD502IJ_S13TJ1NQA03028-part6
splash=silent PROFILE=default vga=0x346

bootsplash: silent mode.

Initializing CPU#0

PID hash table entries: 4096 (order: 12, 32768 bytes)

TSC: PIT calibration confirmed by PMTIMER.

TSC: using PMTIMER calibration value

Detected 2400.163 MHz processor.

Console: colour dummy device 80x25

console [tty0] enabled

Checking aperture…

No AGP bridge found

Node 0: aperture @ b68000000 size 32 MB

Aperture beyond 4GB. Ignoring.

Your BIOS doesn’t leave a aperture memory hole

Please enable the IOMMU option in the BIOS setup

This costs you 64 MB of RAM

Mapping aperture over 65536 KB of RAM @ 20000000

PM: Registered nosave memory: 0000000020000000 - 0000000024000000

Memory: 8174572k/9437184k available (2731k kernel code, 213264k
reserved, 2620k data, 1472k init)
CPA: page pool initialized 1 of 1 pages preallocated

hpet clockevent registered

Calibrating delay loop (skipped), value calculated using timer
frequency… 4800.31 BogoMIPS (lpj=9600636)
kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights
Reserved
Security Framework initialized

SELinux: Disabled at boot.

AppArmor: AppArmor initialized

Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)

Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)

Mount-cache hash table entries: 256

Initializing cgroup subsys ns

Initializing cgroup subsys cpuacct

Initializing cgroup subsys memory

Initializing cgroup subsys devices

Initializing cgroup subsys freezer

CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)

CPU: L2 Cache: 512K (64 bytes/line)

CPU 0/0 -> Node 0

tseg: 0000000000

CPU: Physical Processor ID: 0

CPU: Processor Core ID: 0

using C1E aware idle routine

ACPI: Core revision 20080609

ACPI: Checking initramfs for custom DSDT

Parsing all Control Methods:

Table [DSDT](id 0001) - 854 Objects with 64 Devices 237 Methods 19
Regions
tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully
acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode
successful
Setting APIC routing to flat

…TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

CPU0: AMD Phenom™ 9750 Quad-Core Processor stepping 03

Using local APIC timer interrupts.

APIC timer calibration result 12500860

Detected 12.500 MHz APIC timer.

Booting processor 1/1 ip 6000

Initializing CPU#1

Calibrating delay using timer specific routine… 4800.47 BogoMIPS
(lpj=9600956)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)

CPU: L2 Cache: 512K (64 bytes/line)

CPU 1/1 -> Node 0

CPU: Physical Processor ID: 0

CPU: Processor Core ID: 1

x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106

CPU1: AMD Phenom™ 9750 Quad-Core Processor stepping 03

checking TSC synchronization [CPU#0 -> CPU#1]: passed.

Booting processor 2/2 ip 6000

Initializing CPU#2

Calibrating delay using timer specific routine… 4800.46 BogoMIPS
(lpj=9600936)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)

CPU: L2 Cache: 512K (64 bytes/line)

CPU 2/2 -> Node 0

CPU: Physical Processor ID: 0

CPU: Processor Core ID: 2

x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106

CPU2: AMD Phenom™ 9750 Quad-Core Processor stepping 03

checking TSC synchronization [CPU#1 -> CPU#2]: passed.

Booting processor 3/3 ip 6000

Initializing CPU#3

Calibrating delay using timer specific routine… 4800.50 BogoMIPS
(lpj=9601014)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)

CPU: L2 Cache: 512K (64 bytes/line)

CPU 3/3 -> Node 0

CPU: Physical Processor ID: 0

CPU: Processor Core ID: 3

x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106

CPU3: AMD Phenom™ 9750 Quad-Core Processor stepping 03

checking TSC synchronization [CPU#2 -> CPU#3]: passed.

Brought up 4 CPUs

Total of 4 processors activated (19201.77 BogoMIPS).

CPU0 attaching sched-domain:

domain 0: span 0-3 level CPU

groups: 0 1 2 3

domain 1: span 0-3 level NODE

groups: 0-3

CPU1 attaching sched-domain:

domain 0: span 0-3 level CPU

groups: 1 2 3 0

domain 1: span 0-3 level NODE

groups: 0-3

CPU2 attaching sched-domain:

domain 0: span 0-3 level CPU

groups: 2 3 0 1

domain 1: span 0-3 level NODE

groups: 0-3

CPU3 attaching sched-domain:

domain 0: span 0-3 level CPU

groups: 3 0 1 2

domain 1: span 0-3 level NODE

groups: 0-3

net_namespace: 1936 bytes

Booting paravirtualized kernel on bare hardware

NET: Registered protocol family 16

node 0 link 0: io port [1000, ffffff]

TOM: 00000000c0000000 aka 3072M

Fam 10h mmconf [e0000000, e00fffff]

node 0 link 0: mmio [e0000000, efffffff] ==> [e0100000, efffffff]

node 0 link 0: mmio [f0000000, ffffffff]

node 0 link 0: mmio [a0000, bffff]

node 0 link 0: mmio [c0000000, dfffffff]

TOM2: 0000000240000000 aka 9216M

bus: [00,07] on node 0 link 0

bus: 00 index 0 io port: [0, ffff]

bus: 00 index 1 mmio: [e0100000, ffffffff]

bus: 00 index 2 mmio: [a0000, bffff]

bus: 00 index 3 mmio: [c0000000, dfffffff]

bus: 00 index 4 mmio: [240000000, fcffffffff]

ACPI: bus type pci registered

PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255

PCI: Not using MMCONFIG.

PCI: Using configuration type 1 for base access

PCI: Using configuration type 1 for extended access

evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on
int 0x9
ACPI: EC: Look up EC in DSDT

Completing Region/Field/Buffer/Package
initialization:…

Initialized 12/19 Regions 24/24 Fields 32/32 Buffers 75/77 Packages (863
nodes)
Initializing Device/Processor/Thermal objects by executing _INI
methods:…
Executed 3 _INI methods requiring 0 _STA executions (examined 70
objects)
evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 2
Runtime GPEs in this block
ACPI: Interpreter enabled

ACPI: (supports S0 S1 S3 S4 S5)

ACPI: Using IOAPIC for interrupt routing

PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255

PCI: MCFG area at e0000000 reserved in ACPI motherboard resources

PCI: Using MMCONFIG at e0000000 - efffffff

ACPI: PCI Root Bridge [PCI0] (0000:00)

PCI: 0000:00:00.0 reg 1c 64bit mmio: [e0000000, ffffffff]

pci 0000:00:02.0: PME# supported from D0 D3hot D3cold

pci 0000:00:02.0: PME# disabled

PCI: 0000:00:12.0 reg 10 io port: [c000, c007]

PCI: 0000:00:12.0 reg 14 io port: [b000, b003]

PCI: 0000:00:12.0 reg 18 io port: [a000, a007]

PCI: 0000:00:12.0 reg 1c io port: [9000, 9003]

PCI: 0000:00:12.0 reg 20 io port: [8000, 800f]

PCI: 0000:00:12.0 reg 24 32bit mmio: [f3fff800, f3fffbff]

pci 0000:00:12.0: set SATA to AHCI mode

PCI: 0000:00:13.0 reg 10 32bit mmio: [f3ffe000, f3ffefff]

PCI: 0000:00:13.1 reg 10 32bit mmio: [f3ffd000, f3ffdfff]

PCI: 0000:00:13.2 reg 10 32bit mmio: [f3ffc000, f3ffcfff]

PCI: 0000:00:13.3 reg 10 32bit mmio: [f3ffb000, f3ffbfff]

PCI: 0000:00:13.4 reg 10 32bit mmio: [f3ffa000, f3ffafff]

PCI: 0000:00:13.5 reg 10 32bit mmio: [f3fff000, f3fff0ff]

pci 0000:00:13.5: supports D1

pci 0000:00:13.5: supports D2

pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot

pci 0000:00:13.5: PME# disabled

disabled boot interrupts on PCI device 0x1002:0x4385

PCI: 0000:00:14.0 reg 10 io port: [b00, b0f]

PCI: 0000:00:14.1 reg 10 io port: [0, 7]

PCI: 0000:00:14.1 reg 14 io port: [0, 3]

PCI: 0000:00:14.1 reg 18 io port: [0, 7]

PCI: 0000:00:14.1 reg 1c io port: [0, 3]

PCI: 0000:00:14.1 reg 20 io port: [ff00, ff0f]

PCI: 0000:00:14.2 reg 10 64bit mmio: [f3ff4000, f3ff7fff]

pci 0000:00:14.2: PME# supported from D0 D3hot D3cold

pci 0000:00:14.2: PME# disabled

PCI: 0000:01:00.0 reg 10 32bit mmio: [f7000000, f7ffffff]

PCI: 0000:01:00.0 reg 14 64bit mmio: [c0000000, dfffffff]

PCI: 0000:01:00.0 reg 1c 64bit mmio: [f4000000, f5ffffff]

PCI: 0000:01:00.0 reg 24 io port: [d800, d87f]

PCI: 0000:01:00.0 reg 30 32bit mmio: [f6fe0000, f6ffffff]

PCI: bridge 0000:00:02.0 io port: [d000, dfff]

PCI: bridge 0000:00:02.0 32bit mmio: [f4000000, f7ffffff]

PCI: bridge 0000:00:02.0 64bit mmio pref: [c0000000, dfffffff]

PCI: 0000:02:05.0 reg 10 io port: [e800, e8ff]

PCI: 0000:02:05.0 reg 14 32bit mmio: [febffc00, febffcff]

pci 0000:02:05.0: supports D1

pci 0000:02:05.0: supports D2

pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold

pci 0000:02:05.0: PME# disabled

PCI: 0000:02:06.0 reg 10 32bit mmio: [f8000000, fbffffff]

PCI: 0000:02:07.0 reg 10 32bit mmio: [febff000, febff7ff]

PCI: 0000:02:07.0 reg 14 io port: [e400, e47f]

pci 0000:02:07.0: supports D2

pci 0000:02:07.0: PME# supported from D2 D3hot D3cold

pci 0000:02:07.0: PME# disabled

pci 0000:00:14.4: transparent bridge

PCI: bridge 0000:00:14.4 io port: [e000, efff]

PCI: bridge 0000:00:14.4 32bit mmio: [f8000000, febfffff]

ACPI: PCI Interrupt Routing Table _SB_.PCI0._PRT]

ACPI: PCI Interrupt Routing Table _SB_.PCI0.PCE2._PRT]

ACPI: PCI Interrupt Routing Table _SB_.PCI0.P0PC._PRT]

ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.

ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0,
disabled.
ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 0A,
should be 01 [20080609]
Linux Plug and Play Support v0.97 (c) Adam Belay

pnp: PnP ACPI init

ACPI: bus type pnp registered

pnp 00:07: mem resource (0xfec00000-0xfec00fff) overlaps 0000:00:00.0
BAR 3 (0xe0000000-0xffffffff), disabling
pnp 00:07: mem resource (0xfee00000-0xfee00fff) overlaps 0000:00:00.0
BAR 3 (0xe0000000-0xffffffff), disabling
pnp 00:08: mem resource (0xffb80000-0xffbfffff) overlaps 0000:00:00.0
BAR 3 (0xe0000000-0xffffffff), disabling
pnp 00:08: mem resource (0xfff00000-0xffffffff) overlaps 0000:00:00.0
BAR 3 (0xe0000000-0xffffffff), disabling
pnp 00:0d: mem resource (0xe0000000-0xefffffff) overlaps 0000:00:00.0
BAR 3 (0xe0000000-0xffffffff), disabling
pnp 00:0e: mem resource (0xfec00000-0xffffffff) overlaps 0000:00:00.0
BAR 3 (0xe0000000-0xffffffff), disabling
pnp: PnP ACPI: found 15 devices

ACPI: ACPI bus type pnp unregistered

PCI: Using ACPI for IRQ routing

pci 0000:00:00.0: BAR 3: can’t allocate resource

PCI-DMA: Disabling AGP.

PCI-DMA: aperture base @ 20000000 size 65536 KB

PCI-DMA: using GART IOMMU.

PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture

hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0

hpet0: 4 32-bit timers, 14318180 Hz

AppArmor: AppArmor Filesystem Enabled

Switched to high resolution mode on CPU 0

Switched to high resolution mode on CPU 1

Switched to high resolution mode on CPU 3

ACPI: RTC can wake from S4

Switched to high resolution mode on CPU 2

system 00:08: ioport range 0x4d0-0x4d1 has been reserved

system 00:08: ioport range 0x40b-0x40b has been reserved

system 00:08: ioport range 0x4d6-0x4d6 has been reserved

system 00:08: ioport range 0xc00-0xc01 has been reserved

system 00:08: ioport range 0xc14-0xc14 has been reserved

system 00:08: ioport range 0xc50-0xc51 has been reserved

system 00:08: ioport range 0xc52-0xc52 has been reserved

system 00:08: ioport range 0xc6c-0xc6c has been reserved

system 00:08: ioport range 0xc6f-0xc6f has been reserved

system 00:08: ioport range 0xcd0-0xcd1 has been reserved

system 00:08: ioport range 0xcd2-0xcd3 has been reserved

system 00:08: ioport range 0xcd4-0xcd5 has been reserved

system 00:08: ioport range 0xcd6-0xcd7 has been reserved

system 00:08: ioport range 0xcd8-0xcdf has been reserved

system 00:08: ioport range 0x800-0x89f has been reserved

system 00:08: ioport range 0xb10-0xb1f has been reserved

system 00:08: ioport range 0x900-0x90f has been reserved

system 00:08: ioport range 0x910-0x91f has been reserved

system 00:08: ioport range 0xfe00-0xfefe has been reserved

system 00:0c: ioport range 0xe00-0xe0f has been reserved

system 00:0c: ioport range 0xe80-0xe8f has been reserved

system 00:0c: ioport range 0xf40-0xf4f has been reserved

system 00:0c: ioport range 0xa30-0xa3f has been reserved

system 00:0e: iomem range 0x0-0x9ffff could not be reserved

system 00:0e: iomem range 0xc0000-0xcffff has been reserved

system 00:0e: iomem range 0xe0000-0xfffff could not be reserved

system 00:0e: iomem range 0x100000-0xbfffffff could not be reserved

pci 0000:00:02.0: PCI bridge, secondary bus 0000:01

pci 0000:00:02.0: IO window: 0xd000-0xdfff

pci 0000:00:02.0: MEM window: 0xf4000000-0xf7ffffff

pci 0000:00:02.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff

pci 0000:00:14.4: PCI bridge, secondary bus 0000:02

pci 0000:00:14.4: IO window: 0xe000-0xefff

pci 0000:00:14.4: MEM window: 0xf8000000-0xfebfffff

pci 0000:00:14.4: PREFETCH window: disabled

pci 0000:00:02.0: setting latency timer to 64

bus: 00 index 0 io port: [0, ffff]

bus: 00 index 1 mmio: [0, ffffffffffffffff]

bus: 01 index 0 io port: [d000, dfff]

bus: 01 index 1 mmio: [f4000000, f7ffffff]

bus: 01 index 2 mmio: [c0000000, dfffffff]

bus: 01 index 3 mmio: [0, 0]

bus: 02 index 0 io port: [e000, efff]

bus: 02 index 1 mmio: [f8000000, febfffff]

bus: 02 index 2 mmio: [0, 0]

bus: 02 index 3 io port: [0, ffff]

bus: 02 index 4 mmio: [0, ffffffffffffffff]

NET: Registered protocol family 2

IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)

TCP established hash table entries: 524288 (order: 11, 8388608 bytes)

TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

TCP: Hash tables configured (established 524288 bind 65536)

TCP reno registered

NET: Registered protocol family 1

Unpacking initramfs… done

Freeing initrd memory: 5823k freed

audit: initializing netlink socket (disabled)

type=2000 audit(1231480820.796:1): initialized

HugeTLB registered 2 MB page size, pre-allocated 0 pages

VFS: Disk quotas dquot_6.5.1

Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

msgmni has been set to 3994

Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)

io scheduler noop registered

io scheduler anticipatory registered

io scheduler deadline registered

io scheduler cfq registered (default)

pci 0000:01:00.0: Boot video device

pcieport-driver 0000:00:02.0: setting latency timer to 64

pcieport-driver 0000:00:02.0: found MSI capability

pci_express 0000:00:02.0:pcie00: allocate port service

vesafb: framebuffer at 0xf5000000, mapped to 0xffffc20011800000, using
14336k, total 14336k
vesafb: mode is 1600x1200x16, linelength=3200, pages=1

vesafb: scrolling: redraw

vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0

bootsplash 3.1.6-2004/03/31: looking for picture…

bootsplash: silentjpeg size 123642 bytes

bootsplash: …found (1600x1200, 49531 bytes, v3).

Console: switching to colour frame buffer device 196x71

fb0: VESA VGA frame buffer device

hpet_resources: 0xfed00000 is busy

Non-volatile memory driver v1.2

Linux agpgart interface v0.103

Serial: 8250/16550 driver8 ports, IRQ sharing disabled

serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12

serio: i8042 KBD port at 0x60,0x64 irq 1

serio: i8042 AUX port at 0x60,0x64 irq 12

mice: PS/2 mouse device common for all mice

input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0

cpuidle: using governor ladder

cpuidle: using governor menu

TCP cubic registered

registered taskstats version 1

Freeing unused kernel memory: 1472k freed

Write protecting the kernel read-only data: 5024k

ACPI: No dock devices found.

SCSI subsystem initialized

libata version 3.00 loaded.

ahci 0000:00:12.0: version 3.0

ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22

ahci 0000:00:12.0: controller can’t do 64bit DMA, forcing 32bit

ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA
mode
ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio

scsi0 : ahci

scsi1 : ahci

scsi2 : ahci

scsi3 : ahci

ata1: SATA max UDMA/133 abar m1024@0xf3fff800 port 0xf3fff900 irq 22

ata2: SATA max UDMA/133 abar m1024@0xf3fff800 port 0xf3fff980 irq 22

ata3: SATA max UDMA/133 abar m1024@0xf3fff800 port 0xf3fffa00 irq 22

ata4: SATA max UDMA/133 abar m1024@0xf3fff800 port 0xf3fffa80 irq 22

logips2pp: Detected unknown logitech mouse model 77

ata1: softreset failed (device not ready)

ata1: failed due to HW bug, retry pmp=0

input: ImExPS/2 Logitech Explorer Mouse as
/devices/platform/i8042/serio1/input/input1

ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7

ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)

ata1.00: SB600 AHCI: limiting to 255 sectors per cmd

ata1.00: SB600 AHCI: limiting to 255 sectors per cmd

ata1.00: configured for UDMA/133

ata2: SATA link down (SStatus 0 SControl 300)

ata3: SATA link down (SStatus 0 SControl 300)

ata4: SATA link down (SStatus 0 SControl 300)

scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0
ANSI: 5
pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16

pata_atiixp 0000:00:14.1: setting latency timer to 64

scsi4 : pata_atiixp

scsi5 : pata_atiixp

ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14

ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15

ata5.00: ATAPI: SONY DVD RW DRU-180A, 1.63, max UDMA/66

ata5.00: configured for UDMA/66

scsi 4:0:0:0: CD-ROM SONY DVD RW DRU-180A 1.63 PQ: 0
ANSI: 5
Uniform Multi-Platform E-IDE driver

ACPI: duty_cycle spans bit 4

processor ACPI_CPU:00: registered as cooling_device0

processor ACPI_CPU:01: registered as cooling_device1

processor ACPI_CPU:02: registered as cooling_device2

processor ACPI_CPU:03: registered as cooling_device3

BIOS EDD facility v0.16 2004-Jun-25, 1 devices found

udevd version 128 started

sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500GB/465GiB)

sd 0:0:0:0: [sda] Write Protect is off

sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t
support DPO or FUA
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500GB/465GiB)

sd 0:0:0:0: [sda] Write Protect is off

sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t
support DPO or FUA
usbcore: registered new device driver usb

sda:<7>ohci_hcd: 2006 August 04 USB 1.1 ‘Open’ Host Controller (OHCI)
Driver
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

ohci_hcd 0000:00:13.0: OHCI Host Controller

ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1

ohci_hcd 0000:00:13.0: irq 16, io mem 0xf3ffe000

Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd,
not after
sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >

sd 0:0:0:0: [sda] Attached SCSI disk

usb usb1: configuration #1 chosen from 1 choice

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

usb usb1: New USB device found, idVendor=1d6b, idProduct=0001

usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

usb usb1: Product: OHCI Host Controller

usb usb1: Manufacturer: Linux 2.6.27.7-9-default ohci_hcd

usb usb1: SerialNumber: 0000:00:13.0

ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17

ohci_hcd 0000:00:13.1: OHCI Host Controller

ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2

ohci_hcd 0000:00:13.1: irq 17, io mem 0xf3ffd000

usb usb2: configuration #1 chosen from 1 choice

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 2 ports detected

usb usb2: New USB device found, idVendor=1d6b, idProduct=0001

usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

usb usb2: Product: OHCI Host Controller

usb usb2: Manufacturer: Linux 2.6.27.7-9-default ohci_hcd

usb usb2: SerialNumber: 0000:00:13.1

ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18

ohci_hcd 0000:00:13.2: OHCI Host Controller

ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3

ohci_hcd 0000:00:13.2: irq 18, io mem 0xf3ffc000

usb usb3: configuration #1 chosen from 1 choice

hub 3-0:1.0: USB hub found

hub 3-0:1.0: 2 ports detected

usb usb3: New USB device found, idVendor=1d6b, idProduct=0001

usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

usb usb3: Product: OHCI Host Controller

usb usb3: Manufacturer: Linux 2.6.27.7-9-default ohci_hcd

usb usb3: SerialNumber: 0000:00:13.2

ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17

ohci_hcd 0000:00:13.3: OHCI Host Controller

ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4

ohci_hcd 0000:00:13.3: irq 17, io mem 0xf3ffb000

usb usb4: configuration #1 chosen from 1 choice

hub 4-0:1.0: USB hub found

hub 4-0:1.0: 2 ports detected

usb usb4: New USB device found, idVendor=1d6b, idProduct=0001

usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

usb usb4: Product: OHCI Host Controller

usb usb4: Manufacturer: Linux 2.6.27.7-9-default ohci_hcd

usb usb4: SerialNumber: 0000:00:13.3

ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18

ohci_hcd 0000:00:13.4: OHCI Host Controller

ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5

ohci_hcd 0000:00:13.4: irq 18, io mem 0xf3ffa000

usb usb5: configuration #1 chosen from 1 choice

hub 5-0:1.0: USB hub found

hub 5-0:1.0: 2 ports detected

usb usb5: New USB device found, idVendor=1d6b, idProduct=0001

usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1

usb usb5: Product: OHCI Host Controller

usb usb5: Manufacturer: Linux 2.6.27.7-9-default ohci_hcd

usb usb5: SerialNumber: 0000:00:13.4

ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19

ehci_hcd 0000:00:13.5: EHCI Host Controller

ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6

ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround

ehci_hcd 0000:00:13.5: debug port 1

ehci_hcd 0000:00:13.5: irq 19, io mem 0xf3fff000

ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

usb usb6: configuration #1 chosen from 1 choice

hub 6-0:1.0: USB hub found

hub 6-0:1.0: 10 ports detected

usb usb6: New USB device found, idVendor=1d6b, idProduct=0002

usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1

usb usb6: Product: EHCI Host Controller

usb usb6: Manufacturer: Linux 2.6.27.7-9-default ehci_hcd

usb usb6: SerialNumber: 0000:00:13.5

PM: Starting manual resume from disk

kjournald starting. Commit interval 5 seconds

EXT3 FS on sda7, internal journal

EXT3-fs: mounted filesystem with ordered data mode.

udevd version 128 started

sd 0:0:0:0: Attached scsi generic sg0 type 0

scsi 4:0:0:0: Attached scsi generic sg1 type 5

Floppy drive(s): fd0 is 1.44M

FDC 0 is a post-1991 82077

sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray

Uniform CD-ROM driver Revision: 3.20

sr 4:0:0:0: Attached scsi CD-ROM sr0

input: PC Speaker as /devices/platform/pcspkr/input/input2

input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3

piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0

rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0

rtc0: alarms up to one month, y3k, hpet irqs

8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)

8139cp 0000:02:05.0: This (id 10ec:8139 rev 10) is not an 8139C+
compatible chip
8139cp 0000:02:05.0: Try the “8139too” driver instead.

ACPI: Power Button (FF) [PWRF]

input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4

ACPI: Power Button (CM) [PWRB]

nvidia: module license ‘NVIDIA’ taints kernel.

vendor=1002 device=5978

nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

nvidia 0000:01:00.0: setting latency timer to 64

NVRM: loading NVIDIA UNIX x86_64 Kernel Module 177.82 Tue Nov 4
16:50:05 PST 2008
8139too Fast Ethernet driver 0.9.28

vendor=1002 device=4384

8139too 0000:02:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20

eth0: RealTek RTL8139 at 0xffffc20000c56c00, 00:18:e7:18:38:8c, IRQ 20

eth0: Identified 8139 chip type ‘RTL-8100B/8139D’

vendor=1002 device=4384

ohci1394 0000:02:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22

ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[22]
MMIO=[febff000-febff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
Linux video capture interface: v2.00

HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16

hda_codec: Unknown model for ALC883, trying auto-probe from BIOS…

ALSA sound/pci/hda/hda_codec.c:3047: autoconfig: line_outs=4
(0x14/0x15/0x16/0x17/0x0)
ALSA sound/pci/hda/hda_codec.c:3051: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3055: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)

ALSA sound/pci/hda/hda_codec.c:3056: mono: mono_out=0x0

ALSA sound/pci/hda/hda_codec.c:3064: inputs: mic=0x18, fmic=0x19,
line=0x1a, fline=0x0, cd=0x0, aux=0x0
cx18: Start initialization, version 1.0.0

cx18-0: Initializing card #0

cx18-0: Autodetected Hauppauge card

vendor=1002 device=4384

cx18 0000:02:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21

cx18-0: cx23418 revision 01010000 (B)

cx18 i2c driver #0-0: Test OK

cx18 i2c driver #0-1: Test OK

tveeprom 1-0050: Hauppauge model 74041, rev C6B2, serial# 923264

tveeprom 1-0050: MAC address is 00-0D-FE-0E-16-80

tveeprom 1-0050: tuner model is TCL M2523_5N_E (idx 112, type 50)

tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)

tveeprom 1-0050: audio processor is CX23418 (idx 38)

tveeprom 1-0050: decoder processor is CX23418 (idx 31)

tveeprom 1-0050: has no radio, has IR receiver, has IR transmitter

cx18-0: Autodetected Hauppauge HVR-1600

cx18-0: VBI is not yet supported

tuner 2-0061: chip found @ 0xc2 (cx18 i2c driver #0-1)

cs5345 1-004c: chip found @ 0x98 (cx18 i2c driver #0-0)

tuner-simple 2-0061: creating new instance

tuner-simple 2-0061: type set to 50 (TCL 2002N)

cx18-0: Disabled encoder IDX device

cx18-0: Registered device video0 for encoder MPEG (2 MB)

DVB: registering new adapter (cx18)

MXL5005S: Attached at address 0x63

DVB: registering frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)…

cx18-0: DVB Frontend registered

cx18-0: Registered device video32 for encoder YUV (2 MB)

cx18-0: Registered device video24 for encoder PCM audio (1 MB)

cx18-0: Initialized card #0: Hauppauge HVR-1600

cx18: End initialization

Adding 2104472k swap on /dev/sda6. Priority:-1 extents:1
across:2104472k
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00110666455556de]

device-mapper: uevent: version 1.0.3

device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
dm-devel@redhat.com
loop: module loaded

kjournald starting. Commit interval 5 seconds

EXT3 FS on sda8, internal journal

EXT3-fs: mounted filesystem with ordered data mode.

fuse init (API version 7.9)

bootsplash: status on console 0 changed to off

type=1505 audit(1231509635.569:2): operation=“profile_load”
name="/bin/ping" name2=“default” pid=2070
type=1505 audit(1231509635.593:3): operation=“profile_load”
name="/sbin/klogd" name2=“default” pid=2071
type=1505 audit(1231509635.639:4): operation=“profile_load”
name="/sbin/syslog-ng" name2=“default” pid=2072
type=1505 audit(1231509635.696:5): operation=“profile_load”
name="/sbin/syslogd" name2=“default” pid=2089
type=1505 audit(1231509635.744:6): operation=“profile_load”
name="/usr/sbin/avahi-daemon" name2=“default” pid=2096
type=1505 audit(1231509635.792:7): operation=“profile_load”
name="/usr/sbin/identd" name2=“default” pid=2120
type=1505 audit(1231509635.836:8): operation=“profile_load”
name="/usr/sbin/mdnsd" name2=“default” pid=2122
type=1505 audit(1231509635.900:9): operation=“profile_load”
name="/usr/sbin/nscd" name2=“default” pid=2124
type=1505 audit(1231509635.968:10): operation=“profile_load”
name="/usr/sbin/ntpd" name2=“default” pid=2149
type=1505 audit(1231509636.012:11): operation=“profile_load”
name="/usr/sbin/traceroute" name2=“default” pid=2169
NET: Registered protocol family 10

lo: Disabled Privacy Extensions

powernow-k8: Found 1 AMD Phenom™ 9750 Quad-Core Processor processors
(4 cpu cores) (version 2.20.00)
powernow-k8: ACPI Processor support is required for SMP systems but is
absent. Please load the ACPI Processor module before starting this
driver.

powernow-k8: ACPI Processor support is required for SMP systems but is
absent. Please load the ACPI Processor module before starting this
driver.

powernow-k8: ACPI Processor support is required for SMP systems but is
absent. Please load the ACPI Processor module before starting this
driver.

powernow-k8: ACPI Processor support is required for SMP systems but is
absent. Please load the ACPI Processor module before starting this
driver.

ip6_tables: (C) 2000-2006 Netfilter Core Team

ip_tables: (C) 2000-2006 Netfilter Core Team

nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use

nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option
or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.

firmware: requesting v4l-cx23418-apu.fw

cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes)

eth0: link up, 100Mbps, full-duplex, lpa 0x41E1

NET: Registered protocol family 17

firmware: requesting v4l-cx23418-cpu.fw

cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332 bytes)

cx18-0: FW version: 0.0.74.0 (Release 2007/03/12)

firmware: requesting v4l-cx23418-apu.fw

firmware: requesting v4l-cx23418-cpu.fw

firmware: requesting v4l-cx23418-dig.fw

cx18-0: loaded v4l-cx23418-dig.fw firmware (16382 bytes)

eth0: no IPv6 routers present

SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.100
DST=224.0.0.251 LEN=414 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP
SPT=5353 DPT=5353 LEN=394

SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.100
DST=224.0.0.251 LEN=247 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP
SPT=5353 DPT=5353 LEN=227

SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.100
DST=224.0.0.251 LEN=414 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP
SPT=5353 DPT=5353 LEN=394

CPU0 attaching NULL sched-domain.

CPU1 attaching NULL sched-domain.

CPU2 attaching NULL sched-domain.

CPU3 attaching NULL sched-domain.

CPU0 attaching sched-domain:

domain 0: span 0-3 level CPU

groups: 0 1 2 3

domain 1: span 0-3 level NODE

groups: 0-3

CPU1 attaching sched-domain:

domain 0: span 0-3 level CPU

groups: 1 2 3 0

domain 1: span 0-3 level NODE

groups: 0-3

CPU2 attaching sched-domain:

domain 0: span 0-3 level CPU

groups: 2 3 0 1

domain 1: span 0-3 level NODE

groups: 0-3

CPU3 attaching sched-domain:

domain 0: span 0-3 level CPU

groups: 3 0 1 2

domain 1: span 0-3 level NODE

groups: 0-3

hda-intel: Invalid position buffer, using LPIB read method instead.

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=72.14.207.121 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=3378 DF PROTO=TCP SPT=48299 DPT=80
WINDOW=56 RES=0x00 ACK FIN URGP=0 OPT (0101080A000215A29A5A6ABB)

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=72.21.81.133 LEN=40
TOS=0x00 PREC=0x00 TTL=64 ID=27897 DF PROTO=TCP SPT=36177 DPT=80
WINDOW=351 RES=0x00 ACK FIN URGP=0

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=72.21.81.133 LEN=40
TOS=0x00 PREC=0x00 TTL=64 ID=8811 DF PROTO=TCP SPT=36179 DPT=80
WINDOW=297 RES=0x00 ACK FIN URGP=0

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=72.21.81.133 LEN=40
TOS=0x00 PREC=0x00 TTL=64 ID=22543 DF PROTO=TCP SPT=36180 DPT=80
WINDOW=195 RES=0x00 ACK FIN URGP=0

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=72.21.81.133 LEN=40
TOS=0x00 PREC=0x00 TTL=64 ID=33043 DF PROTO=TCP SPT=36181 DPT=80
WINDOW=160 RES=0x00 ACK FIN URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=72.21.81.133
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=0 DF PROTO=TCP
SPT=80 DPT=36177 WINDOW=0 RES=0x00 RST URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=72.21.81.133
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=0 DF PROTO=TCP
SPT=80 DPT=36180 WINDOW=0 RES=0x00 RST URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=72.21.81.133
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=0 DF PROTO=TCP
SPT=80 DPT=36179 WINDOW=0 RES=0x00 RST URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=72.21.81.133
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=0 DF PROTO=TCP
SPT=80 DPT=36182 WINDOW=0 RES=0x00 RST URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=72.21.81.133
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=0 DF PROTO=TCP
SPT=80 DPT=36181 WINDOW=0 RES=0x00 RST URGP=0

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=70.42.13.101 LEN=40
TOS=0x00 PREC=0x00 TTL=64 ID=26696 DF PROTO=TCP SPT=40652 DPT=80
WINDOW=8576 RES=0x00 ACK FIN URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=72.21.81.133
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=0 DF PROTO=TCP
SPT=80 DPT=36177 WINDOW=0 RES=0x00 RST URGP=0

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=70.42.13.101 LEN=40
TOS=0x00 PREC=0x00 TTL=64 ID=26697 DF PROTO=TCP SPT=40652 DPT=80
WINDOW=8576 RES=0x00 ACK FIN URGP=0

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=72.21.81.133 LEN=40
TOS=0x00 PREC=0x00 TTL=64 ID=27905 DF PROTO=TCP SPT=36177 DPT=80
WINDOW=351 RES=0x00 ACK FIN URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=72.21.81.133
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=0 DF PROTO=TCP
SPT=80 DPT=36177 WINDOW=0 RES=0x00 RST URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=72.21.81.133
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=0 DF PROTO=TCP
SPT=80 DPT=36180 WINDOW=0 RES=0x00 RST URGP=0

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=88.80.7.99 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=21433 DF PROTO=TCP SPT=41721 DPT=80
WINDOW=159 RES=0x00 ACK FIN URGP=0 OPT (0101080A000EE96D9AFFCDD8)

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=88.80.7.99 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=21434 DF PROTO=TCP SPT=41721 DPT=80
WINDOW=159 RES=0x00 ACK FIN URGP=0 OPT (0101080A000EEA619AFFCDD8)

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=88.80.7.99 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=21435 DF PROTO=TCP SPT=41721 DPT=80
WINDOW=159 RES=0x00 ACK FIN URGP=0 OPT (0101080A000EEC499AFFCDD8)

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=88.80.7.99 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=21436 DF PROTO=TCP SPT=41721 DPT=80
WINDOW=159 RES=0x00 ACK FIN URGP=0 OPT (0101080A000EF0199AFFCDD8)

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=88.80.7.99 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=21437 DF PROTO=TCP SPT=41721 DPT=80
WINDOW=159 RES=0x00 ACK FIN URGP=0 OPT (0101080A000EF7B99AFFCDD8)

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=88.80.7.99 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=21438 DF PROTO=TCP SPT=41721 DPT=80
WINDOW=159 RES=0x00 ACK FIN URGP=0 OPT (0101080A000F06F99AFFCDD8)

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=88.80.7.99 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=21439 DF PROTO=TCP SPT=41721 DPT=80
WINDOW=159 RES=0x00 ACK FIN URGP=0 OPT (0101080A000F25799AFFCDD8)

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=68.6.19.1 LEN=40
TOS=0x00 PREC=0x00 TTL=64 ID=4166 DF PROTO=TCP SPT=55695 DPT=80
WINDOW=62780 RES=0x00 ACK FIN URGP=0

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=68.6.19.1 LEN=40
TOS=0x00 PREC=0x00 TTL=64 ID=1983 DF PROTO=TCP SPT=55694 DPT=80
WINDOW=62780 RES=0x00 ACK FIN URGP=0

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=88.80.7.99 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=21440 DF PROTO=TCP SPT=41721 DPT=80
WINDOW=159 RES=0x00 ACK FIN URGP=0 OPT (0101080A000F62799AFFCDD8)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=88.80.7.99
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=50 ID=11008 DF PROTO=TCP
SPT=80 DPT=41721 WINDOW=0 RES=0x00 RST URGP=0

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=68.6.19.1 LEN=40
TOS=0x00 PREC=0x00 TTL=64 ID=542 DF PROTO=TCP SPT=55347 DPT=80
WINDOW=65535 RES=0x00 ACK FIN URGP=0

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=68.6.19.1 LEN=40
TOS=0x00 PREC=0x00 TTL=64 ID=8976 DF PROTO=TCP SPT=55693 DPT=80
WINDOW=62780 RES=0x00 ACK FIN URGP=0

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=68.6.19.1 LEN=40
TOS=0x00 PREC=0x00 TTL=64 ID=4167 DF PROTO=TCP SPT=55695 DPT=80
WINDOW=62780 RES=0x00 ACK FIN URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=125.237.49.197
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=51 ID=20645 PROTO=TCP
SPT=16704 DPT=54700 WINDOW=0 RES=0x00 ACK RST FIN URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=217.42.133.41
DST=192.168.0.100 LEN=64 TOS=0x00 PREC=0x00 TTL=109 ID=28443 DF
PROTO=TCP SPT=45501 DPT=55586 WINDOW=192 RES=0x00 ACK URGP=0 OPT
(0101080A000E921C001396230101050A89C186ED89C19D8D)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=217.42.133.41
DST=192.168.0.100 LEN=64 TOS=0x00 PREC=0x00 TTL=109 ID=28454 DF
PROTO=TCP SPT=45501 DPT=55586 WINDOW=192 RES=0x00 ACK URGP=0 OPT
(0101080A000E9221001396230101050A89C186ED89C1A329)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=222.165.51.52
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=242 ID=3288 PROTO=TCP
SPT=14282 DPT=52871 WINDOW=0 RES=0x00 RST URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=219.74.36.187
DST=192.168.0.100 LEN=691 TOS=0x00 PREC=0x00 TTL=115 ID=17533 DF
PROTO=TCP SPT=45682 DPT=55849 WINDOW=17452 RES=0x00 ACK PSH URGP=0 OPT
(0101080A0002ADCE3CF1EF56)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=219.74.36.187
DST=192.168.0.100 LEN=52 TOS=0x00 PREC=0x00 TTL=115 ID=17546 DF
PROTO=TCP SPT=45682 DPT=55849 WINDOW=17038 RES=0x00 ACK URGP=0 OPT
(0101080A0002ADD03CF1F025)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=219.74.36.187
DST=192.168.0.100 LEN=739 TOS=0x00 PREC=0x00 TTL=115 ID=17888 DF
PROTO=TCP SPT=45682 DPT=55849 WINDOW=17038 RES=0x00 ACK PSH URGP=0 OPT
(0101080A0002ADE63CF1F025)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=219.74.36.187
DST=192.168.0.100 LEN=748 TOS=0x00 PREC=0x00 TTL=115 ID=18398 DF
PROTO=TCP SPT=45682 DPT=55849 WINDOW=17038 RES=0x00 ACK PSH URGP=0 OPT
(0101080A0002AE163CF1F025)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=219.74.36.187
DST=192.168.0.100 LEN=52 TOS=0x00 PREC=0x00 TTL=115 ID=18871 DF
PROTO=TCP SPT=45682 DPT=55849 WINDOW=17038 RES=0x00 ACK URGP=0 OPT
(0101080A0002AE403CF1F025)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=219.74.36.187
DST=192.168.0.100 LEN=64 TOS=0x00 PREC=0x00 TTL=115 ID=20008 PROTO=TCP
SPT=45682 DPT=55849 WINDOW=17038 RES=0x00 ACK PSH URGP=0 OPT
(0101080A0002AEA83CF1F025)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=219.74.36.187
DST=192.168.0.100 LEN=793 TOS=0x00 PREC=0x00 TTL=115 ID=23616 DF
PROTO=TCP SPT=45682 DPT=55849 WINDOW=17038 RES=0x00 ACK PSH URGP=0 OPT
(0101080A0002AFF63CF1F025)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=219.74.36.187
DST=192.168.0.100 LEN=52 TOS=0x00 PREC=0x00 TTL=115 ID=26279 DF
PROTO=TCP SPT=45682 DPT=55849 WINDOW=17038 RES=0x00 ACK URGP=0 OPT
(0101080A0002B0E13CF1F025)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=219.74.36.187
DST=192.168.0.100 LEN=1335 TOS=0x00 PREC=0x00 TTL=115 ID=27953 DF
PROTO=TCP SPT=45682 DPT=55849 WINDOW=17038 RES=0x00 ACK PSH URGP=0 OPT
(0101080A0002B1763CF1F025)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=219.74.223.194
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=241 ID=25601 DF
PROTO=TCP SPT=27741 DPT=40464 WINDOW=0 RES=0x00 ACK RST URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=219.74.36.187
DST=192.168.0.100 LEN=52 TOS=0x00 PREC=0x00 TTL=115 ID=36314 DF
PROTO=TCP SPT=45682 DPT=55849 WINDOW=17038 RES=0x00 ACK URGP=0 OPT
(0101080A0002B4633CF1F025)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=62.120.15.178
DST=192.168.0.100 LEN=64 TOS=0x00 PREC=0x00 TTL=112 ID=30837 DF
PROTO=TCP SPT=21979 DPT=35284 WINDOW=17520 RES=0x00 ACK SYN URGP=0 OPT
(020405B4010303000101080A000000000000000001010402)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=62.120.15.178
DST=192.168.0.100 LEN=64 TOS=0x00 PREC=0x00 TTL=112 ID=31227 DF
PROTO=TCP SPT=21979 DPT=35284 WINDOW=17520 RES=0x00 ACK SYN URGP=0 OPT
(020405B4010303000101080A000000000000000001010402)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=75.10.117.47
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=118 ID=51020 PROTO=TCP
SPT=50941 DPT=56956 WINDOW=0 RES=0x00 ACK RST URGP=0

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=121.208.210.138 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=58174 DF PROTO=TCP SPT=46080 DPT=6881
WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A001596C700407B52)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=212.10.123.79
DST=192.168.0.100 LEN=52 TOS=0x00 PREC=0x00 TTL=114 ID=3263 DF PROTO=TCP
SPT=52887 DPT=37072 WINDOW=65160 RES=0x00 ACK URGP=0 OPT
(0101080A00B5141D0015CC6B)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=212.10.123.79
DST=192.168.0.100 LEN=1500 TOS=0x00 PREC=0x00 TTL=114 ID=3297 DF
PROTO=TCP SPT=52887 DPT=37072 WINDOW=63724 RES=0x00 ACK URGP=0 OPT
(0101080A00B5144C0015CCC0)

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=121.208.210.138 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=58175 DF PROTO=TCP SPT=46080 DPT=6881
WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A0015DC8700407B52)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=219.74.36.187
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=240 ID=4097 DF PROTO=TCP
SPT=45682 DPT=55849 WINDOW=0 RES=0x00 ACK RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=121.6.83.113
DST=192.168.0.100 LEN=742 TOS=0x00 PREC=0x00 TTL=113 ID=19247 DF
PROTO=TCP SPT=41454 DPT=53222 WINDOW=260 RES=0x00 ACK PSH URGP=0 OPT
(0101080A00136A6D24740AC3)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=121.6.83.113
DST=192.168.0.100 LEN=742 TOS=0x00 PREC=0x00 TTL=113 ID=19292 DF
PROTO=TCP SPT=41454 DPT=53222 WINDOW=260 RES=0x00 ACK PSH URGP=0 OPT
(0101080A00136A8B24740AC3)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=121.6.83.113
DST=192.168.0.100 LEN=742 TOS=0x00 PREC=0x00 TTL=113 ID=19419 DF
PROTO=TCP SPT=41454 DPT=53222 WINDOW=260 RES=0x00 ACK PSH URGP=0 OPT
(0101080A00136AC724740AC3)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=121.6.83.113
DST=192.168.0.100 LEN=576 TOS=0x00 PREC=0x00 TTL=113 ID=19612 PROTO=TCP
SPT=41454 DPT=53222 WINDOW=260 RES=0x00 ACK URGP=0 OPT
(0101080A00136B3F24740AC3)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=121.6.83.113
DST=192.168.0.100 LEN=576 TOS=0x00 PREC=0x00 TTL=113 ID=19848 PROTO=TCP
SPT=41454 DPT=53222 WINDOW=260 RES=0x00 ACK URGP=0 OPT
(0101080A00136BB724740AC3)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=121.6.83.113
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=236 ID=1025 DF PROTO=TCP
SPT=41454 DPT=53222 WINDOW=0 RES=0x00 ACK RST URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=190.166.196.227
DST=192.168.0.100 LEN=669 TOS=0x00 PREC=0x00 TTL=52 ID=59245 DF
PROTO=TCP SPT=31691 DPT=53366 WINDOW=64223 RES=0x00 ACK PSH FIN URGP=0

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=201.243.173.131 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=20983 DF PROTO=TCP SPT=40863 DPT=52786
WINDOW=80 RES=0x00 ACK FIN URGP=0 OPT (0101080A0016AC3A19B99A64)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=190.166.196.227
DST=192.168.0.100 LEN=669 TOS=0x00 PREC=0x00 TTL=52 ID=5198 DF PROTO=TCP
SPT=31691 DPT=53366 WINDOW=64223 RES=0x00 ACK PSH FIN URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=201.243.173.131 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=20984 DF PROTO=TCP SPT=40863 DPT=52786
WINDOW=80 RES=0x00 ACK FIN URGP=0 OPT (0101080A0017015A19B99A64)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=78.149.215.250
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=8104 PROTO=TCP
SPT=57688 DPT=53831 WINDOW=0 RES=0x00 ACK RST FIN URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=220.255.179.174
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=242 ID=1025 DF PROTO=TCP
SPT=11922 DPT=37355 WINDOW=0 RES=0x00 ACK RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=121.96.235.241
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=14297 PROTO=TCP
SPT=32679 DPT=59089 WINDOW=0 RES=0x00 ACK RST FIN URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=189.231.56.158
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x20 TTL=247 ID=4097 DF PROTO=TCP
SPT=31666 DPT=36579 WINDOW=0 RES=0x00 ACK RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=59.41.36.138
DST=192.168.0.100 LEN=64 TOS=0x00 PREC=0x00 TTL=116 ID=29161 DF
PROTO=TCP SPT=50000 DPT=60573 WINDOW=17280 RES=0x00 ACK SYN URGP=0 OPT
(020405A0010303000101080A000000000000000001010402)

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=76.28.231.167 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=55039 DF PROTO=TCP SPT=45568 DPT=58952
WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A001A1A6300031811)

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=76.28.231.167 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=55040 DF PROTO=TCP SPT=45568 DPT=58952
WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A001A83B300031811)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=58.96.75.236
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=243 ID=43574 PROTO=TCP
SPT=11450 DPT=58523 WINDOW=0 RES=0x00 ACK RST FIN URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=58.96.75.236
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=243 ID=43614 PROTO=TCP
SPT=11450 DPT=58523 WINDOW=0 RES=0x00 ACK RST FIN URGP=0

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=24.36.44.199 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=10103 DF PROTO=TCP SPT=33326 DPT=10285
WINDOW=69 RES=0x00 ACK FIN URGP=0 OPT (0101080A001B937800788A40)

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=24.36.44.199 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=10104 DF PROTO=TCP SPT=33326 DPT=10285
WINDOW=69 RES=0x00 ACK FIN URGP=0 OPT (0101080A001BD3F800788A40)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=86.155.62.154
DST=192.168.0.100 LEN=52 TOS=0x00 PREC=0x00 TTL=110 ID=8136 DF PROTO=TCP
SPT=59931 DPT=40521 WINDOW=64615 RES=0x00 ACK URGP=0 OPT
(0101080A0028066F001BE1BE)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=86.155.62.154
DST=192.168.0.100 LEN=52 TOS=0x00 PREC=0x00 TTL=110 ID=11793 DF
PROTO=TCP SPT=59931 DPT=40521 WINDOW=63974 RES=0x00 ACK URGP=0 OPT
(0101080A00281E8C001C1E08)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=86.130.180.187
DST=192.168.0.100 LEN=52 TOS=0x00 PREC=0x00 TTL=110 ID=4626 PROTO=TCP
SPT=30689 DPT=34156 WINDOW=17520 RES=0x00 ACK URGP=0 OPT
(0101080A00011E9D001C634F)

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=83.9.74.79 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=48183 DF PROTO=TCP SPT=55425 DPT=55661
WINDOW=46 RES=0x00 ACK FIN URGP=0 OPT (0101080A001C66ED00032B0B)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=86.15.237.190
DST=192.168.0.100 LEN=1500 TOS=0x00 PREC=0x00 TTL=117 ID=20284 DF
PROTO=TCP SPT=30782 DPT=44752 WINDOW=31319 RES=0x00 ACK URGP=0 OPT
(0101080A0000848C001C8656)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=86.15.237.190
DST=192.168.0.100 LEN=1500 TOS=0x00 PREC=0x00 TTL=117 ID=20285 DF
PROTO=TCP SPT=30782 DPT=44752 WINDOW=31319 RES=0x00 ACK URGP=0 OPT
(0101080A0000848C001C8656)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=86.15.237.190
DST=192.168.0.100 LEN=1500 TOS=0x00 PREC=0x00 TTL=117 ID=20292 DF
PROTO=TCP SPT=30782 DPT=44752 WINDOW=31319 RES=0x00 ACK URGP=0 OPT
(0101080A0000848E001C8656)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=86.15.237.190
DST=192.168.0.100 LEN=1500 TOS=0x00 PREC=0x00 TTL=117 ID=20293 DF
PROTO=TCP SPT=30782 DPT=44752 WINDOW=31319 RES=0x00 ACK URGP=0 OPT
(0101080A0000848E001C8656)

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=83.9.74.79 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=48184 DF PROTO=TCP SPT=55425 DPT=55661
WINDOW=46 RES=0x00 ACK FIN URGP=0 OPT (0101080A001CA1ED00032B0B)

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=86.34.3.157 LEN=40
TOS=0x00 PREC=0x00 TTL=64 ID=18019 DF PROTO=TCP SPT=38001 DPT=62913
WINDOW=63 RES=0x00 ACK FIN URGP=0

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=86.34.3.157 LEN=40
TOS=0x00 PREC=0x00 TTL=64 ID=18020 DF PROTO=TCP SPT=38001 DPT=62913
WINDOW=63 RES=0x00 ACK FIN URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=76.205.7.62
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=243 ID=4097 DF PROTO=TCP
SPT=47634 DPT=48554 WINDOW=0 RES=0x00 ACK RST URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=86.159.45.34
DST=192.168.0.100 LEN=52 TOS=0x00 PREC=0x00 TTL=111 ID=31660 DF
PROTO=TCP SPT=58008 DPT=34673 WINDOW=67 RES=0x00 ACK URGP=0 OPT
(0101080A0112AA1D001EAC93)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=41.210.34.6
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=4591 PROTO=TCP
SPT=59888 DPT=38702 WINDOW=0 RES=0x00 ACK RST FIN URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=86.159.45.34
DST=192.168.0.100 LEN=52 TOS=0x00 PREC=0x00 TTL=111 ID=32403 DF
PROTO=TCP SPT=58008 DPT=34673 WINDOW=66 RES=0x00 ACK URGP=0 OPT
(0101080A0112B015001EBB7F)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=220.233.4.245
DST=192.168.0.100 LEN=64 TOS=0x00 PREC=0x00 TTL=109 ID=1130 DF PROTO=TCP
SPT=22025 DPT=47242 WINDOW=15246 RES=0x00 ACK SYN URGP=0 OPT
(020405AC010303000101080A000000000000000001010402)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=220.233.4.245
DST=192.168.0.100 LEN=64 TOS=0x00 PREC=0x00 TTL=109 ID=1294 DF PROTO=TCP
SPT=22025 DPT=47242 WINDOW=15246 RES=0x00 ACK SYN URGP=0 OPT
(020405AC010303000101080A000000000000000001010402)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=220.233.4.245
DST=192.168.0.100 LEN=64 TOS=0x00 PREC=0x00 TTL=109 ID=1719 DF PROTO=TCP
SPT=22025 DPT=47242 WINDOW=15246 RES=0x00 ACK SYN URGP=0 OPT
(020405AC010303000101080A000000000000000001010402)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=78.150.48.166
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=21396 PROTO=TCP
SPT=41317 DPT=48540 WINDOW=0 RES=0x00 ACK RST FIN URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=78.149.215.250
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=9938 PROTO=TCP
SPT=57688 DPT=54341 WINDOW=0 RES=0x00 ACK RST FIN URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=115.51.239.60
DST=192.168.0.100 LEN=1440 TOS=0x00 PREC=0x00 TTL=115 ID=37087 DF
PROTO=TCP SPT=38894 DPT=44999 WINDOW=64746 RES=0x00 ACK URGP=0 OPT
(0101080A0001DF9F00213254)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=115.51.239.60
DST=192.168.0.100 LEN=1440 TOS=0x00 PREC=0x00 TTL=115 ID=37088 DF
PROTO=TCP SPT=38894 DPT=44999 WINDOW=64746 RES=0x00 ACK URGP=0 OPT
(0101080A0001DF9F00213254)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=115.51.239.60
DST=192.168.0.100 LEN=1440 TOS=0x00 PREC=0x00 TTL=115 ID=37089 DF
PROTO=TCP SPT=38894 DPT=44999 WINDOW=64746 RES=0x00 ACK URGP=0 OPT
(0101080A0001DF9F00213254)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=115.51.239.60
DST=192.168.0.100 LEN=1440 TOS=0x00 PREC=0x00 TTL=115 ID=37090 DF
PROTO=TCP SPT=38894 DPT=44999 WINDOW=64746 RES=0x00 ACK URGP=0 OPT
(0101080A0001DF9F00213254)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=115.51.239.60
DST=192.168.0.100 LEN=1440 TOS=0x00 PREC=0x00 TTL=115 ID=37091 DF
PROTO=TCP SPT=38894 DPT=44999 WINDOW=64746 RES=0x00 ACK URGP=0 OPT
(0101080A0001DF9F00213254)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=115.51.239.60
DST=192.168.0.100 LEN=1440 TOS=0x00 PREC=0x00 TTL=115 ID=39809 DF
PROTO=TCP SPT=38894 DPT=44999 WINDOW=64609 RES=0x00 ACK URGP=0 OPT
(0101080A0001E09600214A59)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=58.146.141.146
DST=192.168.0.100 LEN=198 TOS=0x00 PREC=0x00 TTL=50 ID=4978 DF PROTO=TCP
SPT=32882 DPT=47577 WINDOW=10461 RES=0x00 ACK PSH URGP=0 OPT
(0101080A00F3806000220AE1)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=58.146.141.146
DST=192.168.0.100 LEN=198 TOS=0x00 PREC=0x00 TTL=50 ID=4979 DF PROTO=TCP
SPT=32882 DPT=47577 WINDOW=10461 RES=0x00 ACK PSH URGP=0 OPT
(0101080A00F3DA2000220AE1)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=219.64.146.213
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=232 ID=34968 DF
PROTO=TCP SPT=45682 DPT=57297 WINDOW=0 RES=0x00 ACK RST URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=123.2.213.254
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=50 ID=51699 PROTO=TCP
SPT=4881 DPT=55627 WINDOW=0 RES=0x00 ACK RST FIN URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=78.148.11.246
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=32582 PROTO=TCP
SPT=61270 DPT=45383 WINDOW=0 RES=0x00 ACK RST FIN URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=166.87.172.159
DST=192.168.0.100 LEN=97 TOS=0x00 PREC=0x20 TTL=116 ID=44283 DF
PROTO=TCP SPT=23385 DPT=42179 WINDOW=64087 RES=0x00 ACK PSH URGP=0 OPT
(0101080A000520AC00289C0A)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=166.87.172.159
DST=192.168.0.100 LEN=1500 TOS=0x00 PREC=0x20 TTL=116 ID=44556 DF
PROTO=TCP SPT=23385 DPT=42179 WINDOW=65535 RES=0x00 ACK URGP=0 OPT
(0101080A000520D90028A027)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=166.87.172.159
DST=192.168.0.100 LEN=1500 TOS=0x00 PREC=0x20 TTL=116 ID=44557 DF
PROTO=TCP SPT=23385 DPT=42179 WINDOW=65535 RES=0x00 ACK URGP=0 OPT
(0101080A000520D90028A027)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=166.87.172.159
DST=192.168.0.100 LEN=1265 TOS=0x00 PREC=0x20 TTL=116 ID=44608 DF
PROTO=TCP SPT=23385 DPT=42179 WINDOW=64087 RES=0x00 ACK PSH URGP=0 OPT
(0101080A000520E60028A178)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=207.6.147.146
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=247 ID=1025 DF PROTO=TCP
SPT=45682 DPT=54277 WINDOW=0 RES=0x00 ACK RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=216.235.236.133 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=27110 DF PROTO=TCP SPT=37839 DPT=1500
WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A00297F28001BCFE2)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=210.213.138.10
DST=192.168.0.100 LEN=741 TOS=0x00 PREC=0x00 TTL=116 ID=17185 DF
PROTO=TCP SPT=25831 DPT=48443 WINDOW=65475 RES=0x00 ACK PSH URGP=0 OPT
(0101080A000095A60029A488)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=210.213.138.10
DST=192.168.0.100 LEN=741 TOS=0x00 PREC=0x00 TTL=116 ID=20692 DF
PROTO=TCP SPT=25831 DPT=48443 WINDOW=65330 RES=0x00 ACK PSH URGP=0 OPT
(0101080A000096550029B63C)

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=216.235.236.133 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=27111 DF PROTO=TCP SPT=37839 DPT=1500
WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A0029CE68001BCFE2)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=207.229.140.2
DST=192.168.0.100 LEN=52 TOS=0x00 PREC=0x00 TTL=121 ID=10430 DF
PROTO=TCP SPT=25244 DPT=40837 WINDOW=62500 RES=0x00 ACK URGP=0 OPT
(0101080A0001408C002B5378)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=207.229.140.2
DST=192.168.0.100 LEN=1040 TOS=0x00 PREC=0x00 TTL=121 ID=10431 DF
PROTO=TCP SPT=25244 DPT=40837 WINDOW=62500 RES=0x00 ACK URGP=0 OPT
(0101080A0001408C002B53AB)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=207.229.140.2
DST=192.168.0.100 LEN=1040 TOS=0x00 PREC=0x00 TTL=121 ID=10434 DF
PROTO=TCP SPT=25244 DPT=40837 WINDOW=62500 RES=0x00 ACK URGP=0 OPT
(0101080A0001408C002B53B1)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=207.229.140.2
DST=192.168.0.100 LEN=64 TOS=0x00 PREC=0x00 TTL=121 ID=10435 DF
PROTO=TCP SPT=25244 DPT=40837 WINDOW=62500 RES=0x00 ACK URGP=0 OPT
(0101080A0001408C002B53B1)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=207.229.140.2
DST=192.168.0.100 LEN=1040 TOS=0x00 PREC=0x00 TTL=121 ID=10436 DF
PROTO=TCP SPT=25244 DPT=40837 WINDOW=62500 RES=0x00 ACK URGP=0 OPT
(0101080A0001408C002B53B9)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=78.149.215.250
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=12339 PROTO=TCP
SPT=57688 DPT=44179 WINDOW=0 RES=0x00 ACK RST FIN URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=89.240.199.243
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=26026 PROTO=TCP
SPT=58112 DPT=59670 WINDOW=0 RES=0x00 ACK RST FIN URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=200.180.191.77
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=44 ID=5793 PROTO=TCP
SPT=44162 DPT=38783 WINDOW=0 RES=0x00 ACK RST FIN URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=222.93.247.38
DST=192.168.0.100 LEN=64 TOS=0x08 PREC=0x00 TTL=52 ID=10545 PROTO=TCP
SPT=80 DPT=41017 WINDOW=65535 RES=0x00 ACK SYN URGP=0 OPT
(02040586010303020101080A000000000000000001010402)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=222.93.247.38
DST=192.168.0.100 LEN=64 TOS=0x08 PREC=0x00 TTL=52 ID=10839 PROTO=TCP
SPT=80 DPT=41017 WINDOW=65535 RES=0x00 ACK SYN URGP=0 OPT
(02040586010303020101080A000000000000000001010402)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=82.155.140.133
DST=192.168.0.100 LEN=52 TOS=0x00 PREC=0x00 TTL=119 ID=48806 DF
PROTO=TCP SPT=47811 DPT=59993 WINDOW=15984 RES=0x00 ACK URGP=0 OPT
(0101080A00037EA9002D39AF)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=82.155.140.133
DST=192.168.0.100 LEN=52 TOS=0x00 PREC=0x00 TTL=119 ID=52342 DF
PROTO=TCP SPT=47811 DPT=59993 WINDOW=17381 RES=0x00 ACK URGP=0 OPT
(0101080A00037F56002D4A85)

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=213.239.140.15 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=14100 DF PROTO=TCP SPT=47544 DPT=80
WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A002EF1478C880CB5)

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=66.114.51.101 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=25954 DF PROTO=TCP SPT=45873 DPT=80
WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A002EF14793E1AE7B)

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=174.132.110.119 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=47704 DF PROTO=TCP SPT=52501 DPT=80
WINDOW=158 RES=0x00 ACK FIN URGP=0 OPT (0101080A002EF1478E8CBBC3)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=66.114.51.101
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=59 ID=0 DF PROTO=TCP
SPT=80 DPT=45873 WINDOW=0 RES=0x00 RST URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=174.132.110.119
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=56 ID=0 DF PROTO=TCP
SPT=80 DPT=52501 WINDOW=0 RES=0x00 RST URGP=0

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=66.114.51.101 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=25955 DF PROTO=TCP SPT=45873 DPT=80
WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A002EF18493E1AE7B)

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=174.132.110.119 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=47705 DF PROTO=TCP SPT=52501 DPT=80
WINDOW=158 RES=0x00 ACK FIN URGP=0 OPT (0101080A002EF1848E8CBBC3)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=66.114.51.101
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=59 ID=0 DF PROTO=TCP
SPT=80 DPT=45873 WINDOW=0 RES=0x00 RST URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=66.114.51.101
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=59 ID=0 DF PROTO=TCP
SPT=80 DPT=45873 WINDOW=0 RES=0x00 RST URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=218.212.229.175
DST=192.168.0.100 LEN=576 TOS=0x00 PREC=0x00 TTL=115 ID=9092 PROTO=TCP
SPT=666 DPT=56177 WINDOW=260 RES=0x00 ACK URGP=0 OPT
(0101080A000DBBAB002EDE28)

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=213.239.140.15 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=14105 DF PROTO=TCP SPT=47544 DPT=80
WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A002F0F308C880CB5)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=218.212.229.175
DST=192.168.0.100 LEN=846 TOS=0x00 PREC=0x00 TTL=115 ID=11728 DF
PROTO=TCP SPT=666 DPT=56177 WINDOW=260 RES=0x00 ACK PSH URGP=0 OPT
(0101080A000DC42C002EDE28)

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=66.114.51.101 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=25962 DF PROTO=TCP SPT=45873 DPT=80
WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A002F2E0A93E1AE7B)

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=174.132.110.119 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=47712 DF PROTO=TCP SPT=52501 DPT=80
WINDOW=158 RES=0x00 ACK FIN URGP=0 OPT (0101080A002F2E0A8E8CBBC3)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=66.114.51.101
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=59 ID=0 DF PROTO=TCP
SPT=80 DPT=45873 WINDOW=0 RES=0x00 RST URGP=0

SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=213.239.140.15 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=14107 DF PROTO=TCP SPT=47544 DPT=80
WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A002F6BD08C880CB5)

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=213.239.140.15
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=12248 DF PROTO=TCP
SPT=80 DPT=47544 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=89.242.131.166
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=34765 PROTO=TCP
SPT=52059 DPT=43460 WINDOW=0 RES=0x00 ACK RST FIN URGP=0

SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=24.234.2.40
DST=192.168.0.100 LEN=60 TOS=0x00 PREC=0x00 TTL=61 ID=0 DF PROTO=TCP
SPT=80 DPT=52790 WINDOW=5792 RES=0x00 ACK SYN URGP=0 OPT
(020405B40402080AB6EC6543003000A301030301)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=24.234.2.40
DST=192.168.0.100 LEN=60TOS=0x00 PREC=0x00 TTL=61 ID=0 DF PROTO=TCP
SPT=80 DPT=52790 WINDOW=5792 RES=0x00 ACK SYN URGP=0 OPT
(020405B40402080AB6ECC303003000A301030301)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=24.234.2.40
DST=192.168.0.100 LEN=60TOS=0x00 PREC=0x00 TTL=61 ID=0 DF PROTO=TCP
SPT=80 DPT=52790 WINDOW=5792 RES=0x00 ACK SYN URGP=0 OPT
(020405B40402080AB6ED7F4B003000A301030301)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=81.164.91.56
DST=192.168.0.100 LEN=52 TOS=0x00 PREC=0x00 TTL=107 ID=10658 DF
PROTO=TCP SPT=38699 DPT=48035 WINDOW=65364 RES=0x00 ACK URGP=0 OPT
(0101080A000163B200307600)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=24.91.171.226
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=49 ID=41502 PROTO=TCP
SPT=57322 DPT=42447 WINDOW=0 RES=0x00 ACK RST FIN URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=24.91.171.226
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=49 ID=41506 PROTO=TCP
SPT=57322 DPT=42447 WINDOW=0 RES=0x00 ACK RST FIN URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=24.91.171.226
DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=49 ID=41509 PROTO=TCP
SPT=57322 DPT=42447 WINDOW=0 RES=0x00 ACK RST FIN URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=121.7.226.240 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=64927 DF PROTO=TCP SPT=44504 DPT=45682
WINDOW=46 RES=0x00 ACK FIN URGP=0 OPT (0101080A003121B100000000)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=121.7.226.240 LEN=52
TOS=0x00 PREC=0x00 TTL=64 ID=64928 DF PROTO=TCP SPT=44504 DPT=45682
WINDOW=46 RES=0x00 ACK FIN URGP=0 OPT (0101080A00317B8D00000000)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=219.74.88.20
DST=192.168.0.100 LEN=670 TOS=0x00 PREC=0x00 TTL=114 ID=35912 DF
PROTO=TCP SPT=39485 DPT=41293 WINDOW=65467 RES=0x00 ACK PSH FIN URGP=0
OPT (0101080A000172693D66AEF3)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:18:e7:18:38:8c:00:0f:3d:36:7d:30:08:00 SRC=90.146.189.241
DST=192.168.0.100 LEN=52 TOS=0x00 PREC=0x00 TTL=112 ID=23895 DF
PROTO=TCP SPT=63840 DPT=48331 WINDOW=0 RES=0x00 ACK URGP=0 OPT
(0101080A0003050300334EB2)

[wiwheelman]

See the last post at this link it may possibly help you.
Nabble - ivtv users - Hauppauge HVR-1600 driver/firmware issues (classic view)