Hello
I installed 11.1 64 and it booted fine for first
boot, but after restarting I only get this:
isolinux: Disk error 01 , AX = 201, 80
with or without install dvd in the drive
I can boot into the repair system everything ok
except bootloader error → so I press the repair
button → repair result is ok.
While still in the repair system I try to
boot the installed system , now I get the error
No Linux root partition found.
Here is the fstab:
/dev/disk/by-id/ata-Maxtor_6B300S0_B6072X4H-part1 swap swap defaults 0 0
/dev/disk/by-id/ata-Maxtor_6B300S0_B6072X4H-part2 / ext3 acl,user_xattr 1 1
/dev/disk/by-id/ata-Maxtor_6B300S0_B6072X4H-part3 /home ext3 acl,user_xattr 1 2
proc /proc proc defaults 0 0
sysfs /sys sysfs noauto 0 0
debugfs /sys/kernel/debug debugfs noauto 0 0
usbfs /proc/bus/usb usbfs noauto 0 0
/dev/sdi1 /data4 ext3 defaults 1 2
/dev/disk/by-id/ata-Maxtor_6B300S0_B607K5SH-part1 /data1sdg1 auto noauto,user 0 0
/dev/disk/by-id/ata-Maxtor_6B300S0_B607K5TH-part1 /data1sdh1 auto noauto,user 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
/dev/disk/by-id/ata-Maxtor_6B300S0_B607K8DH-part1 /data1 auto noauto,user 0 0
grub menu.lst
Modified by YaST2. Last modification on Tue Dec 23 12:31:11 HKT 2008
default 0
timeout 8
gfxmenu (hd0,1)/boot/message
##YaST - activate
###Don’t change this comment - YaST2 identifier: Original name: linux###
title SUSE LINUX
root (hd0,1)
kernel /boot/vmlinuz root=/dev/disk/by-id/ata-Maxtor_6B300S0_B6072X4H-part2 repair=1 resume=/dev/disk/by-id/ata-Maxtor_6B300S0_B6072X4H-part1 splash=silent showopts vga=0x346
initrd /boot/initrd
###Don’t change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe – SUSE LINUX
root (hd0,1)
kernel /boot/vmlinuz root=/dev/disk/by-id/ata-Maxtor_6B300S0_B6072X4H-part2 showopts ide=nodma apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 x11failsafe vga=0x346
initrd /boot/initrd
System
Gigabyte GA-K8XNP-9
AMD FX-55
4 x 300GB Maxtor sata drives
Currently writing this via an Ubuntu 
live cd
where I can see all my data on the 4 drives.
I also made a clean install on another 500GB Seagate drive
with no other drives attached, same error.
Is it openSuse dislikes my system or maybe the BIOS acting up
Previous install was a opensuse 11.0 which had worked fine.
The drive with the root partition was lowlevel formatted
prior to install of 11.1
Any ideas ?
Thanks
Db