GQRX not detecting Airspy in Leap 15.2

rpanesbu · November 4, 2020, 10:54pm

Dear all,
I am using Leap 15.2 and installed GQRX to operate a SDR Airspy HF+.
The device Airspy HF+ is not detected by Leap 15.2.

I am operating the same SDR device with a Raspberry Pi 4 and it works perfect.


~> uname -a
Linux localhost.localdomain 5.3.18-lp152.47-default #1 SMP Thu Oct 15 16:05:25 UTC 2020 (41f7396) x86_64 x86_64 x86_64 GNU/Linux


~> gqrx
linux; GNU C++ version 7.5.0; Boost_106600; UHD_003.009.007-0-unknown

No protocol specified
No protocol specified
gr-osmosdr 0.2.0.0 (0.2.0) gnuradio 3.8.2.0
built-in source types: file osmosdr fcd rtl rtl_tcp uhd miri sdrplay hackrf bladerf rfspace airspy airspyhf soapy redpitaya freesrp xtrx 
gr::log :WARN: file_source0 - file size is not a multiple of item size
Resampling audio 96000 -> 48000
BookmarksFile is /home/ruben/.config/gqrx/bookmarks.csv
get_devices started
Device count: 0
get_devices end
gr-osmosdr 0.2.0.0 (0.2.0) gnuradio 3.8.2.0
built-in source types: file osmosdr fcd rtl rtl_tcp uhd miri sdrplay hackrf bladerf rfspace airspy airspyhf soapy redpitaya freesrp xtrx 
rtl_tcp_source_c/connect: Connection refused
gr-osmosdr 0.2.0.0 (0.2.0) gnuradio 3.8.2.0
built-in source types: file osmosdr fcd rtl rtl_tcp uhd miri sdrplay hackrf bladerf rfspace airspy airspyhf soapy redpitaya freesrp xtrx 
gr::log :WARN: file_source0 - file size is not a multiple of item size

Any ideas?
Thank you,
Ruben

tsu2 · November 4, 2020, 11:40pm

First question,
Did you install from an openSUSE repository, and if so, which one?
Although the project website doesn’t build RPMs, it looks like a very recent version can be found in the hardware:sdr repo.

https://software.opensuse.org/package/gqrx

Also,
I’m not familiar with the hardware that is being detected, but I’m wondering if it has to be powered and on or otherwise configured possibly including a firewall to accept communications. Your log suggested that your SDR attempted to connect to a number of different types of devices and detected something that actively rejected your connection attempt.

TSU

malcolmlewis · November 5, 2020, 5:24am

rpanesbu:

Dear all,
I am using Leap 15.2 and installed GQRX to operate a SDR Airspy HF+.
The device Airspy HF+ is not detected by Leap 15.2.

I am operating the same SDR device with a Raspberry Pi 4 and it works perfect.


~> uname -a
Linux localhost.localdomain 5.3.18-lp152.47-default #1 SMP Thu Oct 15 16:05:25 UTC 2020 (41f7396) x86_64 x86_64 x86_64 GNU/Linux


~> gqrx
linux; GNU C++ version 7.5.0; Boost_106600; UHD_003.009.007-0-unknown

No protocol specified
No protocol specified
gr-osmosdr 0.2.0.0 (0.2.0) gnuradio 3.8.2.0
built-in source types: file osmosdr fcd rtl rtl_tcp uhd miri sdrplay hackrf bladerf rfspace airspy airspyhf soapy redpitaya freesrp xtrx 
gr::log :WARN: file_source0 - file size is not a multiple of item size
Resampling audio 96000 -> 48000
BookmarksFile is /home/ruben/.config/gqrx/bookmarks.csv
get_devices started
Device count: 0
get_devices end
gr-osmosdr 0.2.0.0 (0.2.0) gnuradio 3.8.2.0
built-in source types: file osmosdr fcd rtl rtl_tcp uhd miri sdrplay hackrf bladerf rfspace airspy airspyhf soapy redpitaya freesrp xtrx 
rtl_tcp_source_c/connect: Connection refused
gr-osmosdr 0.2.0.0 (0.2.0) gnuradio 3.8.2.0
built-in source types: file osmosdr fcd rtl rtl_tcp uhd miri sdrplay hackrf bladerf rfspace airspy airspyhf soapy redpitaya freesrp xtrx 
gr::log :WARN: file_source0 - file size is not a multiple of item size

Any ideas?
Thank you,
Ruben

Hi Ruben
Have you added your user to the rtlsdr group?

When you say not detected, is the device seen in the lsusb output, have you tried testing the device?

For example;


 lsusb |grep DVB-T
Bus 001 Device 007: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T
Bus 001 Device 006: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T
Bus 002 Device 003: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T
 
rtl_test
Found 3 device(s):
  0:  NooElec, NESDR Nano 2, SN: stx:1090:34
  1:  NooElec, NESDR Nano 2, SN: stx:978:36
  2:  Realtek, RTL2838UHIDIR, SN: 00000000

Using device 0: Generic RTL2832U OEM
Detached kernel driver
Found Rafael Micro R820T tuner
....

I only use mine for flight tracking and fm radio from the command line…

rpanesbu · November 5, 2020, 3:27pm

Thank you for your message.
I installed GQRX from here:
https://build.opensuse.org/package/show/hardware%3Asdr/gqrx

The SDR device is connected and powered via USB port.
I know there is not a problem in the SDR because I am using the same one under Raspberry Pi 4 and it works.

When I click on “Device” of the combo box (now appears “other”) when starting GQRX, Airspay is not in in the list to be selected. it is like the Airspy is not detected, so I cannot connect to it.

Best regards,
Ruben

rpanesbu · November 5, 2020, 3:49pm

malcolmlewis:

Hi Ruben
Have you added your user to the rtlsdr group?

When you say not detected, is the device seen in the lsusb output, have you tried testing the device?

For example;
 lsusb |grep DVB-T
Bus 001 Device 007: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T
Bus 001 Device 006: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T
Bus 002 Device 003: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T
 
rtl_test
Found 3 device(s):
  0:  NooElec, NESDR Nano 2, SN: stx:1090:34
  1:  NooElec, NESDR Nano 2, SN: stx:978:36
  2:  Realtek, RTL2838UHIDIR, SN: 00000000

Using device 0: Generic RTL2832U OEM
Detached kernel driver
Found Rafael Micro R820T tuner
....
I only use mine for flight tracking and fm radio from the command line…

This is what I get with lsudb command. It seems that it is not there…

:~> lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 13ee:0001 MosArt Optical Mouse
Bus 001 Device 003: ID 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory
Bus 001 Device 002: ID 03eb:800c Atmel Corp. 
Bus 001 Device 005: ID 05e3:0723 Genesys Logic, Inc. GL827L SD/MMC/MS Flash Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


~> lsusb -v

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         3 
  bMaxPacketSize0         9
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0003 3.0 root hub
  bcdDevice            5.03
  iManufacturer           3 
  iProduct                2 
  iSerial                 1 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           31
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
        bMaxBurst               0

Bus 001 Device 004: ID 13ee:0001 MosArt Optical Mouse
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.00
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x13ee MosArt
  idProduct          0x0001 Optical Mouse
  bcdDevice            0.10
  iManufacturer           1 
  iProduct                2 
  iSerial                 3 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      2 Mouse
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.00
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      52
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              10

Bus 001 Device 003: ID 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x1c4f SiGma Micro
  idProduct          0x0002 Keyboard TRACER Gamma Ivory
  bcdDevice            1.10
  iManufacturer           1 
  iProduct                2 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           59
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower               98mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      1 Keyboard
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.10
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      54
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              10
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.10
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      50
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0003  1x 3 bytes
        bInterval              10

Bus 001 Device 002: ID 03eb:800c Atmel Corp. 
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x03eb Atmel Corp.
  idProduct          0x800c 
  bcdDevice            1.00
  iManufacturer           1 
  iProduct                2 
  iSerial                 3 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           41
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           0
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0 
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0

Bus 001 Device 005: ID 05e3:0723 Genesys Logic, Inc. GL827L SD/MMC/MS Flash Card Reader
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x05e3 Genesys Logic, Inc.
  idProduct          0x0723 GL827L SD/MMC/MS Flash Card Reader
  bcdDevice           94.51
  iManufacturer           3 
  iProduct                4 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            5.03
  iManufacturer           3 
  iProduct                2 
  iSerial                 1 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12

I did not add the user to any group.

Best regards,
Ruben

malcolmlewis · November 5, 2020, 5:22pm

rpanesbu:

This is what I get with lsudb command. It seems that it is not there…

:~> lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 13ee:0001 MosArt Optical Mouse
Bus 001 Device 003: ID 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory
Bus 001 Device 002: ID 03eb:800c Atmel Corp. 
Bus 001 Device 005: ID 05e3:0723 Genesys Logic, Inc. GL827L SD/MMC/MS Flash Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub



I did not add the user to any group.

Best regards,
Ruben

Hi
So the device isn’t seen at all. On the RPi4, what OS and kernel are running and lsusb output?

Likely a bug report will be needed, a udev rule updated perhaps for the device. Do you know what chipset is in the device?

rpanesbu · November 5, 2020, 7:34pm

Now I am with the Raspberry Pi4

~ $ uname -a
Linux raspberrypi 5.4.72-v7l+ #1356 SMP Thu Oct 22 13:57:51 BST 2020 armv7l GNU/Linux

~ $ cat /etc/os-release
PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
NAME="Raspbian GNU/Linux"
VERSION_ID="10"
VERSION="10 (buster)"
VERSION_CODENAME=buster
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

This is the output to lsusb:

 lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory
Bus 001 Device 004: ID 13ee:0001 MosArt Optical Mouse
Bus 001 Device 003: ID 03eb:800c Atmel Corp. Airspy HF+
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

And this is the output to lsusb -v:


lsusb -v


Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         3 
  bMaxPacketSize0         9
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0003 3.0 root hub
  bcdDevice            5.04
  iManufacturer           3 
  iProduct                2 
  iSerial                 1 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x001f
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
        bMaxBurst               0


Bus 001 Device 005: ID 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x1c4f SiGma Micro
  idProduct          0x0002 Keyboard TRACER Gamma Ivory
  bcdDevice            1.10
  iManufacturer           1 
  iProduct                2 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x003b
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower               98mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      1 Keyboard
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.10
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      54
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              10
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.10
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      50
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0003  1x 3 bytes
        bInterval              10


Bus 001 Device 004: ID 13ee:0001 MosArt Optical Mouse
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.00
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x13ee MosArt
  idProduct          0x0001 Optical Mouse
  bcdDevice            0.10
  iManufacturer           1 
  iProduct                2 
  iSerial                 3 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0022
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      2 Mouse
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.00
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      52
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              10


Bus 001 Device 003: ID 03eb:800c Atmel Corp. Airspy HF+
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x03eb Atmel Corp.
  idProduct          0x800c Airspy HF+
  bcdDevice            1.00
  iManufacturer           1 www.airspy.com
  iProduct                2 AIRSPY HF+
  iSerial                 3 AIRSPYHF SN:C8528E80BEC73FA0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0029
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           0
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0 
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  bNumConfigurations      1
can't get debug descriptor: Resource temporarily unavailable
Device Status:     0x0000
  (Bus Powered)


Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x2109 VIA Labs, Inc.
  idProduct          0x3431 Hub
  bcdDevice            4.21
  iManufacturer           0 
  iProduct                1 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0019
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12


Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            5.04
  iManufacturer           3 
  iProduct                2 
  iSerial                 1 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0019
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12

I hope this can help
Best regards,
Ruben

malcolmlewis · November 5, 2020, 7:43pm

Hi
What about the output on the RPi4 for usb-devices, need to see the driver it’s using;

For example;


T:  Bus=02 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0bda ProdID=2838 Rev=01.00
S:  Manufacturer=Realtek
S:  Product=RTL2838UHIDIR
S:  SerialNumber=00000000
C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=dvb_usb_rtl28xxu
I:  If#=0x1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

Leap 15.2 only has the 5.3.x kernel, so likely driver support…

rpanesbu · November 5, 2020, 8:14pm

malcolmlewis:

Hi
What about the output on the RPi4 for usb-devices, need to see the driver it’s using;

For example;


T:  Bus=02 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0bda ProdID=2838 Rev=01.00
S:  Manufacturer=Realtek
S:  Product=RTL2838UHIDIR
S:  SerialNumber=00000000
C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=dvb_usb_rtl28xxu
I:  If#=0x1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

Leap 15.2 only has the 5.3.x kernel, so likely driver support…

This is the output I get from the Raspberry Pi4


~ $ sudo cat /sys/kernel/debug/usb/devices

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 5.04
S:  Manufacturer=Linux 5.4.72-v7l+ xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=0000:01:00.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms


T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 4
D:  Ver= 2.10 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2109 ProdID=3431 Rev= 4.21
S:  Product=USB2.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms


T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=1.5  MxCh= 0
D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=13ee ProdID=0001 Rev= 0.10
S:  Manufacturer=MOON
S:  Product=AND 
S:  SerialNumber=@LAB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usbhid
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=10ms


T:  Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#=  4 Spd=1.5  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=1c4f ProdID=0002 Rev= 1.10
S:  Manufacturer=USB
S:  Product=USB Keykoard
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 98mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=01 Driver=usbhid
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=10ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
E:  Ad=82(I) Atr=03(Int.) MxPS=   3 Ivl=10ms


T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#=  5 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=03eb ProdID=800c Rev= 1.00
S:  Manufacturer=www.airspy.com
S:  Product=AIRSPY HF+
S:  SerialNumber=AIRSPYHF SN:C8528E80BEC73FA0
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 0 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms


T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=5000 MxCh= 4
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 3.00 Cls=09(hub  ) Sub=00 Prot=03 MxPS= 9 #Cfgs=  1
P:  Vendor=1d6b ProdID=0003 Rev= 5.04
S:  Manufacturer=Linux 5.4.72-v7l+ xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=0000:01:00.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

Best regards,
Ruben

malcolmlewis · November 5, 2020, 9:33pm

Hi
Are the following packages installed on Leap 15.2?


airspy airspy-udev airspyhf-udev libairspy0 libairspyhf0

tsu2 · November 5, 2020, 10:24pm

Yes, I imagine those must be required to install the udev vendor:device id for airspy.
Otherwise, I’d expect that the vendor:device id can be found in your RPi setup (or described somewhere on the Internet).

Used to have to do this regularly to enable discovery of early Android devices all the time…

TSU

rpanesbu · November 8, 2020, 2:14pm

Thank you for the reply.

These are the packages installed containing “airspy”:


# rpm -qa |grep airspy
soapy-airspy-debugsource-0.1.2-lp152.7.4.x86_64
airspyhf-udev-1.6.8-lp152.14.4.x86_64
soapysdr0.7-module-airspyhf-debuginfo-0.1.0-lp152.1.1.x86_64
airspy-devel-1.0.9-lp152.18.3.x86_64
airspyhf-devel-1.6.8-lp152.14.4.x86_64
soapysdr0.7-module-airspy-debuginfo-0.1.2-lp152.7.4.x86_64
python3-allpairspy-2.5.0-lp152.1.2.noarch
airspy-debuginfo-1.0.9-lp152.18.3.x86_64
airspy-1.0.9-lp152.18.3.x86_64
libairspy0-1.0.9-lp152.18.3.x86_64
soapysdr0.7-module-airspy-0.1.2-lp152.7.4.x86_64
airspyhf-debugsource-1.6.8-lp152.14.4.x86_64
libairspyhf0-1.6.8-lp152.14.4.x86_64
soapysdr0.7-module-airspyhf-0.1.0-lp152.1.1.x86_64
airspy-debugsource-1.0.9-lp152.18.3.x86_64
libairspy0-debuginfo-1.0.9-lp152.18.3.x86_64
python2-allpairspy-2.5.0-lp152.1.2.noarch
airspyhf-1.6.8-lp152.14.4.x86_64
airspy-udev-1.0.9-lp152.18.3.x86_64
airspyhf-debuginfo-1.6.8-lp152.14.4.x86_64
libairspyhf0-debuginfo-1.6.8-lp152.14.4.x86_64
soapy-airspyhf-debugsource-0.1.0-lp152.1.1.x86_64

Best regards,
Ruben

malcolmlewis · November 8, 2020, 3:06pm

rpanesbu:

Thank you for the reply.

These are the packages installed containing “airspy”:


# rpm -qa |grep airspy
soapy-airspy-debugsource-0.1.2-lp152.7.4.x86_64
airspyhf-udev-1.6.8-lp152.14.4.x86_64
soapysdr0.7-module-airspyhf-debuginfo-0.1.0-lp152.1.1.x86_64
airspy-devel-1.0.9-lp152.18.3.x86_64
airspyhf-devel-1.6.8-lp152.14.4.x86_64
soapysdr0.7-module-airspy-debuginfo-0.1.2-lp152.7.4.x86_64
python3-allpairspy-2.5.0-lp152.1.2.noarch
airspy-debuginfo-1.0.9-lp152.18.3.x86_64
airspy-1.0.9-lp152.18.3.x86_64
libairspy0-1.0.9-lp152.18.3.x86_64
soapysdr0.7-module-airspy-0.1.2-lp152.7.4.x86_64
airspyhf-debugsource-1.6.8-lp152.14.4.x86_64
libairspyhf0-1.6.8-lp152.14.4.x86_64
soapysdr0.7-module-airspyhf-0.1.0-lp152.1.1.x86_64
airspy-debugsource-1.0.9-lp152.18.3.x86_64
libairspy0-debuginfo-1.0.9-lp152.18.3.x86_64
python2-allpairspy-2.5.0-lp152.1.2.noarch
airspyhf-1.6.8-lp152.14.4.x86_64
airspy-udev-1.0.9-lp152.18.3.x86_64
airspyhf-debuginfo-1.6.8-lp152.14.4.x86_64
libairspyhf0-debuginfo-1.6.8-lp152.14.4.x86_64
soapy-airspyhf-debugsource-0.1.0-lp152.1.1.x86_64

Best regards,
Ruben

Hi
If you can find the relevant udev entry on the RPi4 (udevadm monitor) and plug the device in, you should see the rule being called, then duplicate that rule into /etc/udev/rules.d in the openSUSE system. Then run the monitor (udevadm monitor) again on the openSUSE system and should see it called?

rpanesbu · November 8, 2020, 10:49pm

This is the output from the Raspberry Pi4 when I plug in the Airspy


$ sudo udevadm monitor


monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent


KERNEL[410.542002] add      /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1 (usb)
KERNEL[410.542636] add      /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.0 (usb)
KERNEL[410.543398] bind     /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1 (usb)
UDEV  [410.577692] add      /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1 (usb)
UDEV  [410.590193] add      /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.0 (usb)
UDEV  [410.601659] bind     /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1 (usb)

rules.d contains 2 files. one of them is for the airspyhf:


:/etc/udev/rules.d $ ls


52-airspyhf.rules  99-com.rules

And the rules inside 52.airspyhf.rules are:


nano 52-airspyhf.rules 


ATTR{idVendor}=="03eb", ATTR{idProduct}=="800c", SYMLINK+="airspyhf-%k", MODE="$

I will go now over to Leap again and I will try to create the same rules there

Best regards,
Ruben

rpanesbu · November 8, 2020, 11:15pm

rpanesbu:

This is the output from the Raspberry Pi4 when I plug in the Airspy


$ sudo udevadm monitor


monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent


KERNEL[410.542002] add      /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1 (usb)
KERNEL[410.542636] add      /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.0 (usb)
KERNEL[410.543398] bind     /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1 (usb)
UDEV  [410.577692] add      /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1 (usb)
UDEV  [410.590193] add      /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.0 (usb)
UDEV  [410.601659] bind     /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1 (usb)

rules.d contains 2 files. one of them is for the airspyhf:


:/etc/udev/rules.d $ ls


52-airspyhf.rules  99-com.rules

And the rules inside 52.airspyhf.rules are:


nano 52-airspyhf.rules 


ATTR{idVendor}=="03eb", ATTR{idProduct}=="800c", SYMLINK+="airspyhf-%k", MODE="$

I will go now over to Leap again and I will try to create the same rules there

Best regards,
Ruben

Back to Leap now.


> sudo udevadm monitor
[sudo] password for root: 
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent

KERNEL[273.801533] add      /devices/pci0000:00/0000:00:14.0/usb1/1-3 (usb)
KERNEL[273.802931] add      /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0 (usb)
UDEV  [273.812440] add      /devices/pci0000:00/0000:00:14.0/usb1/1-3 (usb)
UDEV  [273.817718] add      /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0 (usb)

I noticed that there is no binding…


/etc/udev/rules.d> ls
55-libsane.rules  56-sane-backends-autoconfig.rules  70-persistent-net.rules

There is no 52-airspyhf.rules files in the directory.

I create the file:


:/etc/udev/rules.d> sudo touch 52-airspyhf.rules
[sudo] password for root: 

:/etc/udev/rules.d> ls
52-airspyhf.rules  56-sane-backends-autoconfig.rules
55-libsane.rules   70-persistent-net.rules

Now I edit the file and I add the same rules I had in Raspberry Pi


sudo nano 52-airspyhf.rules

I added the line and saved.
I opened GQRX and I get the same problem…


~> lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 13ee:0001 MosArt Optical Mouse
Bus 001 Device 004: ID 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory
Bus 001 Device 006: ID 03eb:800c Atmel Corp. 
Bus 001 Device 003: ID 05e3:0723 Genesys Logic, Inc. GL827L SD/MMC/MS Flash Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Any ideas?

Thank you,
Ruben

rpanesbu · November 20, 2020, 7:23am

Dear all,
After an update in the kernel, GQRX is working!



~> uname -a
Linux localhost.localdomain 5.3.18-lp152.50-default #1 SMP Tue Nov 10 21:02:48 UTC 2020 (29ac38d) x86_64 x86_64 x86_64 GNU/Linux

Enjoy your listening!
Best regards,
Ruben