Failes to boot up after upgrade

Dear all,
unti last night I was using opensuse 12.1 .

at grub I receive the following messages (as system is down and could not copy paste please find screnhots)before booting halts.
ImageShack® - Online Photo and Video Hosting


# Modified by YaST2. Last modification on Mon Jan 14 17:49:18 CET 2013
# THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader
# For the new kernel it try to figure out old parameters. In case we are
not able to recognize it (e.g. change of flavor or strange install order )
it it use as fallback installation parameters from
/etc/sysconfig/bootloader
default 2
timeout 8
##YaST - generic_mbr
gfxmenu (hd0,1)/message

##YaST - activate
###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 12.1 - 3.4.11-2.16 (default)
    root (hd0,1)
    kernel /vmlinuz-3.4.11-2.16-default root=/dev/sda3 splash=0
resume=/dev/sda6 splash=silent quiet showopts vga=0x31a
    initrd /initrd-3.4.11-2.16-default

###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 12.1 - 3.4.11-2.16 (default)
    root (hd0,1)
    kernel /vmlinuz-3.4.11-2.16-default root=/dev/sda3 showopts apm=off
noresume edd=off powersaved=off nohz=off highres=off
processor.max_cstate=1 nomodeset  x11failsafe vga=0x31a
    initrd /initrd-3.4.11-2.16-default

###Don't change this comment - YaST2 identifier: Original name: linux###
title Desktop -- openSUSE 12.1 - 3.4.11-2.16
    root (hd0,1)
    kernel /vmlinuz-3.4.11-2.16-desktop root=/dev/sda3 splash=0
resume=/dev/sda6 splash=silent quiet showopts vga=0x31a
    initrd /initrd-3.4.11-2.16-desktop

###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 12.1 - 3.4.11-2.16 (desktop)
    root (hd0,1)
    kernel /vmlinuz-3.4.11-2.16-desktop root=/dev/sda3 showopts apm=off
noresume edd=off powersaved=off nohz=off highres=off
processor.max_cstate=1 nomodeset  x11failsafe vga=0x31a
    initrd /initrd-3.4.11-2.16-desktop

###Don't change this comment - YaST2 identifier: Original name: floppy###
title Diskette
    rootnoverify (fd0)
    chainloader +1

###Don't change this comment - YaST2 identifier: Original name: other###
title Windows 7
    map (hd0) (hd0)
    map (hd0) (hd0)
    rootnoverify (hd0,0)
    makeactive
    chainloader +1


device.map
(fd0) /dev/fd0
(hd0) /dev/disk/by-id/ata-WDC_WD20EVDS-63T3B0_WD-WCAVY6660374
~






linux:/home/linux # fdisk -l

Disk /dev/sda: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0000a718

Device Boot Start End Blocks Id System
/dev/sda1 * 63 524297339 262148638+ 7 HPFS/NTFS/exFAT
/dev/sda2 524297340 526353659 1028160 83 Linux
/dev/sda3 526353660 780309179 126977760 83 Linux
/dev/sda4 780309180 3907024064 1563357442+ f W95 Ext’d (LBA)
/dev/sda5 780309243 3894156062 1556923410 83 Linux
/dev/sda6 3894157312 3907022847 6432768 82 Linux swap / Solaris

Disk /dev/sdb: 32.0 GB, 32015122432 bytes
21 heads, 21 sectors/track, 141790 cylinders, total 62529536 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xc3072e18

Device Boot Start End Blocks Id System
/dev/sdb1 * 8064 62529535 31260736 c W95 FAT32 (LBA)

contents of boot partitions





and the contents of boot directory


|
|
[TABLE=“width: 100%, align: center”]

[TR]

[TD]
[TABLE=“width: 100%, align: center”]

[TR=“bgcolor: #ffffff”]

[TD]
[TABLE=“align: left”]

[TR]

[TD=“align: left”]
-rw------- 1 root root 512 Nov 3 10:22 backup_mbrlrwxrwxrwx 1 root root 1 Aug 29 05:38 boot → .-rw-r–r-- 1 root root 1236 Oct 25 2011 boot.readme-rw-r–r-- 1 root root 131150 Oct 4 20:56 config-3.4.11-2.16-default-rw-r–r-- 1 root root 131351 Oct 4 20:56 config-3.4.11-2.16-desktopdrwxr-xr-x 2 root root 4096 Jan 15 07:31 grublrwxrwxrwx 1 root root 26 Jan 14 16:49 initrd ->initrd-3.4.11-2.16-default-rw-r–r-- 1 root root 13668583 Jan 14 16:50 initrd-3.4.11-2.16-default-rw-r–r-- 1 root root 13314471 Jan 14 16:51 initrd-3.4.11-2.16-desktopdrwx------ 2 root root 16384 Aug 28 12:19 lost+found-rw-r–r-- 1 root root 582656 Jan 14 16:44 message-rw-r–r-- 1 root root 634719 Oct 4 22:08 symtypes-3.4.11-2.16-default.gz-rw-r–r-- 1 root root 635604 Oct 4 23:02 symtypes-3.4.11-2.16-desktop.gz-rw-r–r-- 1 root root 222417 Oct 4 22:04 symvers-3.4.11-2.16-default.gz-rw-r–r-- 1 root root 222379 Oct 4 22:51 symvers-3.4.11-2.16-desktop.gz-rw-r–r-- 1 root root 409 Oct 4 22:04 sysctl.conf-3.4.11-2.16-default-rw-r–r-- 1 root root 520 Oct 4 22:51 sysctl.conf-3.4.11-2.16-desktop-rw-r–r-- 1 root root 2405545 Oct 4 21:52 System.map-3.4.11-2.16-default-rw-r–r-- 1 root root 2487319 Oct 4 22:30 System.map-3.4.11-2.16-desktop-rw-r–r-- 1 root root 5467969 Oct 4 22:04 vmlinux-3.4.11-2.16-default.gz-rw-r–r-- 1 root root 5719500 Oct 4 22:50 vmlinux-3.4.11-2.16-desktop.gzlrwxrwxrwx 1 root root 27 Jan 14 16:49 vmlinuz ->vmlinuz-3.4.11-2.16-default-rw-r–r-- 1 root root 4694960 Oct 4 21:52 vmlinuz-3.4.11-2.16-default-rw-r–r-- 1 root root 4919280 Oct 4 22:30 vmlinuz-3.4.11-2.16-desktop|

[/TD]
[/TR]
[/TABLE]
[/TD]
[/TR]
[/TABLE]
[/TD]
[/TR]

[TR]

[TD=“bgcolor: #ffffff, colspan: 2”][/TD]
[/TR]

[/TABLE]

I wonder if https://forums.opensuse.org/english/get-technical-help-here/install-boot-login/482307-urgent-after-update-grub-2-today-system-lvm-encrypted-laptop-completeley-broken.html is the same problem … ?