Error-Message by USB-WLAN what now?

English Network/Internet
#1

Hi

i did what in the thread “My wireless doesn’t work - a primer on what I should do next” stand

i found my device in the kernel, but i get no message about firmware, ther stands that no adress is accepted

usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27.7-9-pae ehci_hcd
usb usb5: SerialNumber: 0000:00:10.4
usb 3-1: device not accepting address 2, error -71
hub 3-0:1.0: unable to enumerate USB device on port 1
usb 1-1: USB disconnect, address 2
usbcore: registered new interface driver hiddev
usb 5-5: new high speed USB device using ehci_hcd and address 3
lines 505-539

original print from kernel-list

usb5 device3 is my wlan-chipset

any idea what i should do next?

#2

help me to understand this more with three pieces of information:

  1. Please run in a console the command: lsusb – and post the results back here.
  2. Also, look in the handbook for your device and describe it to us, even if it is in microsoft/windows language.
  3. Is there an internet link to the product page for the device?

Thanks

#3

ok, sorry

  1. Bus 005 Device 003: ID 0bf8:100f Fujitsu Siemens Computers
    Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 003: ID 093a:2510 Pixart Imaging, Inc.
    Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

  2. what do you mean really? it is a wlan-chipset lsis 163u

  3. i only found driversites

#4

I’ve read the data sheet.
AMILO Notebooks Archive - Home Notebooks - Fujitsu Siemens Computers
It is uncommunicative. All I can suggest is to use Ndiswrapper. There’s a tutorial here:
Madwifi or Ndiswrapper Wireless Network Drivers - Suse/openSUSE 10, 11 - LAN & Internet access
I can’t say whethet this will work because the device seems to be not properly sensed by the usb system – maybe try it and see.
Skip around the Madwifi parts.

#5

hi

ndiswrapper i have installed, as in the documention listet, that i need this for this chipset

but after installing he loaded the win-driver regulary, without errors but i get no connection to my wlan-chipset

there is no wlan in the conection-manager available

#6

GoTo Yast and select in (Global OPtions) traditional method with ifup and then if you do not see a device to configure (in Overview) then select to “add” it and proceed to configure it starting with Pic #5