Hallo zusammen,
OpenSUSE 13.2 frisch aufgesetzt, bei Epson den passenden Druckertreiber heruntergeladen und installiert.
(bei 13.1 lief der Drucker)
Testseite drucken klappt nicht:
epsonstylussx130-35 root 17408 Mon Nov 10 19:47:50 2014
printer epsonstylussx130 is idle. enabled since Mon Nov 10 19:47:50 2014
/opt/epson-inkjet-printer-201101w/cups/lib/filter/epson_inkjet_printer_filter failed
LibreOffice Dokument mit dem Inhalt “Test”
wird gedruckt, inklusive ungewollter, dünner Linien an den Rändern und auf vier Seiten (“Test” wird nur auf erster Seite gedruckt).
Druckerstatus “Formatting page 4”.
Hat jemand Ideen?
Vielen Dank!
Jürgen
Die error_log Datei sagt:
E [10/Nov/2014:19:50:22 +0100] [Job 36] Job stopped due to filter errors; please consult the error_log file for details.
D [10/Nov/2014:19:50:22 +0100] [Job 36] The following messages were recorded from 19:50:22 to 19:50:22
D [10/Nov/2014:19:50:22 +0100] [Job 36] Adding start banner page “none”.
D [10/Nov/2014:19:50:22 +0100] [Job 36] Queued on “epsonstylussx130” by “root”.
D [10/Nov/2014:19:50:22 +0100] [Job 36] Auto-typing file…
D [10/Nov/2014:19:50:22 +0100] [Job 36] Request file type is application/postscript.
D [10/Nov/2014:19:50:22 +0100] [Job 36] File of type application/postscript queued by “root”.
D [10/Nov/2014:19:50:22 +0100] [Job 36] Adding end banner page “none”.
D [10/Nov/2014:19:50:22 +0100] [Job 36] job-sheets=none,none
D [10/Nov/2014:19:50:22 +0100] [Job 36] argv[0]=“epsonstylussx130”
D [10/Nov/2014:19:50:22 +0100] [Job 36] argv[1]=“36”
D [10/Nov/2014:19:50:22 +0100] [Job 36] argv[2]=“root”
D [10/Nov/2014:19:50:22 +0100] [Job 36] argv[3]=“YaST2testprint_epsonstylussx130”
D [10/Nov/2014:19:50:22 +0100] [Job 36] argv[4]=“1”
D [10/Nov/2014:19:50:22 +0100] [Job 36] argv[5]=“finishings=3 number-up=1 page-label=epsonstylussx130:YaST2testprint@linux-i94f job-uuid=urn:uuid:6d97ee65-1e35-32e6-4737-a334471ae33a job-originating-host-name=localhost time-at-creation=1415645422 time-at-processing=1415645422”
D [10/Nov/2014:19:50:22 +0100] [Job 36] argv[6]="/var/spool/cups/d00036-001"
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[0]=“CUPS_CACHEDIR=/var/cache/cups”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[1]=“CUPS_DATADIR=/usr/share/cups”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[2]=“CUPS_DOCROOT=/usr/share/cups/webcontent”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[3]=“CUPS_FONTPATH=/usr/share/cups/fonts”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[4]=“CUPS_REQUESTROOT=/var/spool/cups”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[5]=“CUPS_SERVERBIN=/usr/lib/cups”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[6]=“CUPS_SERVERROOT=/etc/cups”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[7]=“CUPS_STATEDIR=/run/cups”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[8]=“HOME=/var/spool/cups/tmp”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[9]=“PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[10]=“SERVER_ADMIN=root@linux-i94f”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[11]=“SOFTWARE=CUPS/1.5.4”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[12]=“TMPDIR=/var/spool/cups/tmp”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[13]=“USER=root”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[14]=“CUPS_MAX_MESSAGE=2047”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[15]=“CUPS_SERVER=/run/cups/cups.sock”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[16]=“CUPS_ENCRYPTION=IfRequested”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[17]=“IPP_PORT=631”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[18]=“CHARSET=utf-8”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[19]=“LANG=en.UTF-8”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[20]=“PPD=/etc/cups/ppd/epsonstylussx130.ppd”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[21]=“RIP_MAX_CACHE=128m”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[22]=“CONTENT_TYPE=application/postscript”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[23]=“DEVICE_URI=usb://EPSON/Stylus%20SX130”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[24]=“PRINTER_INFO=Epson Stylus SX130 Series - epson-inkjet-printer 1.0.0-1lsb3.2 (Seiko Epson Corporation LSB 3.2)”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[25]=“PRINTER_LOCATION=”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[26]=“PRINTER=epsonstylussx130”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[27]=“PRINTER_STATE_REASONS=none”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[28]=“CUPS_FILETYPE=document”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[29]=“FINAL_CONTENT_TYPE=printer/epsonstylussx130”
D [10/Nov/2014:19:50:22 +0100] [Job 36] envp[30]=“AUTH_I****”
D [10/Nov/2014:19:50:22 +0100] [Job 36] Started filter /usr/lib/cups/filter/pstotiff (PID 2283)
D [10/Nov/2014:19:50:22 +0100] [Job 36] Started filter /usr/lib/cups/filter/imagetoraster (PID 2284)
D [10/Nov/2014:19:50:22 +0100] [Job 36] Started filter /opt/epson-inkjet-printer-201101w/cups/lib/filter/epson_inkjet_printer_filter (PID 2285)
D [10/Nov/2014:19:50:22 +0100] [Job 36] Started backend /usr/lib/cups/backend/usb (PID 2286)
D [10/Nov/2014:19:50:22 +0100] [Job 36] STATE: +connecting-to-device
D [10/Nov/2014:19:50:22 +0100] [Job 36] Can’t open CUPS raster file.DEBUG: imagetops - copying to temp print file “/var/spool/cups/tmp/008ec5462f02e”.
D [10/Nov/2014:19:50:22 +0100] [Job 36] Printer using device file “/dev/usb/lp0”…
D [10/Nov/2014:19:50:22 +0100] [Job 36] STATE: -connecting-to-device
D [10/Nov/2014:19:50:22 +0100] [Job 36] backendRunLoop(print_fd=0, device_fd=5, snmp_fd=-1, addr=(nil), use_bc=1, side_cb=0x7ff972724cb0)
D [10/Nov/2014:19:50:22 +0100] [Job 36] GPL Ghostscript 9.15 (2014-09-22)
D [10/Nov/2014:19:50:22 +0100] [Job 36] Copyright (C) 2014 Artifex Software, Inc. All rights reserved.
D [10/Nov/2014:19:50:22 +0100] [Job 36] This software comes with NO WARRANTY: see the file PUBLIC for details.
D [10/Nov/2014:19:50:22 +0100] [Job 36] Loading NimbusSanL-Bold font from /usr/share/ghostscript/9.15/Resource/Font/NimbusSanL-Bold… 4246912 2728031 1646152 346945 1 done.
D [10/Nov/2014:19:50:22 +0100] [Job 36] Loading NimbusSanL-Regu font from /usr/share/ghostscript/9.15/Resource/Font/NimbusSanL-Regu… 4263856 2786465 1646152 350621 1 done.
D [10/Nov/2014:19:50:22 +0100] [Job 36] Loading NimbusRomNo9L-Regu font from /usr/share/ghostscript/9.15/Resource/Font/NimbusRomNo9L-Regu… 4280800 2857225 1646152 354310 1 done.
D [10/Nov/2014:19:50:22 +0100] [Job 36] Page = 595x842; 8,8 to 587,834
D [10/Nov/2014:19:50:22 +0100] [Job 36] TIFF resolution = 204.000000x196.000000, units=2
D [10/Nov/2014:19:50:22 +0100] [Job 36] Stored resolution = 204x196 PPI
D [10/Nov/2014:19:50:22 +0100] [Job 36] img->colorspace = 1
D [10/Nov/2014:19:50:22 +0100] [Job 36] orientation = top-left
D [10/Nov/2014:19:50:22 +0100] [Job 36] photometric = 0
D [10/Nov/2014:19:50:22 +0100] [Job 36] compression = 4
D [10/Nov/2014:19:50:22 +0100] [Job 36] Before scaling: xppi=204, yppi=196, zoom=0.00
D [10/Nov/2014:19:50:22 +0100] [Job 36] Before scaling: xprint=8.0, yprint=11.5
D [10/Nov/2014:19:50:22 +0100] [Job 36] Image size is 8.5 x 11.0 inches…
D [10/Nov/2014:19:50:22 +0100] [Job 36] Auto orientation…
D [10/Nov/2014:19:50:22 +0100] [Job 36] xpages = 2x4.24in, ypages = 1x11.00in
D [10/Nov/2014:19:50:22 +0100] [Job 36] XPosition=0, YPosition=0, Orientation=0
D [10/Nov/2014:19:50:22 +0100] [Job 36] xprint=4, yprint=11
D [10/Nov/2014:19:50:22 +0100] [Job 36] PageLeft=8, PageRight=587, PageWidth=595
D [10/Nov/2014:19:50:22 +0100] [Job 36] PageBottom=8, PageTop=834, PageLength=842
D [10/Nov/2014:19:50:22 +0100] [Job 36] left=145.18, top=816.95
D [10/Nov/2014:19:50:22 +0100] [Job 36] Printing page 1.
D [10/Nov/2014:19:50:22 +0100] [Job 36] Set job-printer-state-message to “Printing page 1.”, current level=INFO
D [10/Nov/2014:19:50:22 +0100] [Job 36] Printing page 2.
D [10/Nov/2014:19:50:22 +0100] [Job 36] Set job-printer-state-message to “Printing page 2.”, current level=INFO
D [10/Nov/2014:19:50:22 +0100] [Job 36] End of messages
D [10/Nov/2014:19:50:22 +0100] [Job 36] printer-state=3(idle)
D [10/Nov/2014:19:50:22 +0100] [Job 36] printer-state-message="/opt/epson-inkjet-printer-201101w/cups/lib/filter/epson_inkjet_printer_filter failed"
D [10/Nov/2014:19:50:22 +0100] [Job 36] printer-state-reasons=none
