En OpenSUSE Leap 15.6 no logro hacer andar el scanner de la Brother DCP-J125

[neschii]

Hola, buenos días.

Vuelvo a no encontrar la manera de hacer andar el scanner de la dcp-j125 que anduvo sin ningún tipo de problemas en la versión Leap 15.5

[joaquin@maxmayor:~] $ sudo inxi
CPU: 8-core AMD FX-8320E (-MT MCP-) speed/min/max: 1400/1400/3200 MHz
Kernel: 6.4.0-150600.23.14-default x86_64 Up: 2h 26m Mem: 6384.2/7674.5 MiB (83.2%)
Storage: 4.19 TiB (22.4% used) Procs: 411 Shell: Sudo inxi: 3.3.27
[joaquin@maxmayor:~] $ scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[joaquin@maxmayor:~] $ sudo scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[joaquin@maxmayor:~] $ sane-find-scanner

# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.

# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x04f9 [Brother], product=0x0253 [DCP-J125]) at libusb:003:002
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend’s manpage.

# Not checking for parallel port scanners.

# Most Scanners connected to the parallel port or other proprietary ports
# can’t be detected by this program.

# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
[joaquin@maxmayor:~] $ sudo zypper se -si brscan
Cargando datos del repositorio…
Leyendo los paquetes instalados…

S | Name | Type | Version | Arch | Repository
—±------------±--------±---------±-------±----------------------
i+ | brscan-skey | paquete | 0.3.2-0 | x86_64 | (Paquetes del sistema)
i+ | brscan-skey | paquete | 0.3.1-2 | x86_64 | (Paquetes del sistema)
i+ | brscan3 | paquete | 0.2.13-1 | x86_64 | (Paquetes del sistema)
[joaquin@maxmayor:~] $ lsusb | grep -i j125
Bus 003 Device 002: ID 04f9:0253 Brother Industries, Ltd DCP-J125
[joaquin@maxmayor:~] $

El yast no lo detecta y no puedo hacer que lo haga.

Agradezco a quien pueda brindarme alguna idea para solucionar esto.

Muchas gracias.

Un cordial saludo.

Joaquín (a) Giordano Bruno MCMLVII.

[Sauerland]

¿Está instalado libnsl1?

Some scanners may disappear from system after upgrade to Leap 15.6

Symptom: A scanner which worked fine in previous system versions is no longer recognized by the system. If this is the case, running scanimage -vL will reveal the cause. Cause: The package sane-backends requires package libnsl1 be installed., but this may not necessarily be the case in all situations. It certainly was not in mine. Libnsl1 is not even listed in the requires for package sane-backends, which provides the scanimage program. Solution: Install package libnsl1with zipper or YaST, the…

[neschii]

Un lujo. Muchas gracias. Era ese el problema.

[joaquin@maxmayor:~] $ sudo zypper se -si libnsl1
Cargando datos del repositorio…
Leyendo los paquetes instalados…
No se encuentran elementos que coincidan.
[joaquin@maxmayor:~] $ sudo zypper in libnsl1
Recuperando los metadatos del repositorio ‘KDE:Extra’ …[terminado]
Construyendo el caché del repositorio KDE:Extra …[terminado]
Recuperando los metadatos del repositorio ‘Brave Browser - Beta’ …[terminado]
Construyendo el caché del repositorio Brave Browser - Beta …[terminado]
Recuperando los metadatos del repositorio ‘Update repository of openSUSE Backports’ …[terminado]
Construyendo el caché del repositorio Update repository of openSUSE Backports …[terminado]
Recuperando los metadatos del repositorio ‘Update repository with updates from SUSE Linux Enterprise 15’ …[terminado]
Construyendo el caché del repositorio Update repository with updates from SUSE Linux Enterprise 15 …[terminado]
Cargando datos del repositorio…
Leyendo los paquetes instalados…
Resolviendo dependencias de paquete…

El siguiente paquete NUEVO va a ser instalado:
libnsl1

1 nuevo paquete a instalar.
Tamaño total de descarga: 137,4 KiB. Ya en caché: 0 B. Después de la operación, se utilizarán 121,6 KiB adicionales.

Backend: classic_rpmtrans
¿Desea continuar? [s/n/v/…? mostrar todas las opciones] (s):
Recuperando: libnsl1-2.38-150600.14.5.1.x86_64 (Update repository with updates from SUSE Linux Enterprise 15) (1/1), 137,4 KiB
Recuperando: libnsl1-2.38-150600.14.5.1.x86_64.rpm …[terminado (302,8 KiB/s)]

Buscando conflictos de archivos: …[terminado]
(1/1) Instalando: libnsl1-2.38-150600.14.5.1.x86_64 …[terminado]
[joaquin@maxmayor:~] $ sudo zypper ps -s
No se encuentran procesos que utilicen archivos suprimidos.

No se han actualizado bibliotecas o servicios básicos.
Es probable que no sea necesario reiniciar.
[joaquin@maxmayor:~] $ scanimage -L
device `brother3:bus7;dev1’ is a Brother DCP-J125 USB scanner
[joaquin@maxmayor:~] $ simple-scan
[joaquin@maxmayor:~] $

Gracias, Sauerland.

Un cordial saludo.

Joaquín (a) Giordano Bruno MCMLVII.

[Krovikan]

Hola.

Por favor, haz check en la casilla Solución del mensaje de @Sauerland para que quede marcado como solución del hilo.

Saludos

[neschii]

Pronto.

Gracias.

Un cordial saludo.