DVD will not work with OpenSuSE 11.1

English Install/Boot/Login
1

I upgraded my OpenSuSE 11.0 to 11.1 and it takes a long time to boot and the DVD-ROM will no longer work.
I get continously the next error-message.

ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.00: configured for PIO0
ata2: EH complete

The DVD-ROM is from TEAC Model DV28EV (IDE).
Can anybody help me with this problem??
Thanks in advance!

2

Welcome to the forums.

AFAICS something went wrong during upgrade. I suggest you perform a clean install of openSUSE 11.2

3

DVD is working again. Thanks for your help.
But no I have the next problem. My be you can help me:
I’m working for some years with a simulation program for mechanical systems called “ADAMS”.
It worked with OpenSuSE 10.2/11.0/11.1.
But now I get an error and the Vendor of the software can not help be, because they only support RHLinux.

Installation of the software is done without any problem, I can load a model, but when I try to simulate I get the error “option: Subscript out of range”.

Do you have any idea, how I can solve this problem in version 11.2??
Thanks in advance.

4

This reads like an application problem ? When we get that on our ground control system (for our spacecraft control) it typically means a calibration curve is being used to translate a value, but the curve does not cover the range of the value.

5

But the same model with the same simulation values runs without problems in the older OpenSuSE 's.
So what’s happening in 11.2?? Any idea??

6

If this is a mission critical app and it is only supported on RH then you should run it on RH.