drmRadeonCmdBuffer: -22. Kernel failed to parse or rejected command stream. See dmesg for more info.

With opensuse11.2 I am getting following error while running openGL apps:

drmRadeonCmdBuffer: -22. Kernel failed to parse or rejected command stream. See dmesg for more info.

I think this is problem with radeon drivers. Is there solution to this? Tnx

Boris

I am having the same issue… :frowning:

When calling “glxgears”, I also get:
drmRadeonCmdBuffer: -22. Kernel failed to parse or rejected command stream. See dmesg for more info.

Conqueror (sysinfo:/) recognizes RV630 [Radeon HD 2600XT] from ATI Technologies Inc, but the driver is unknown…

If I try to download driver:
sudo zypper in ati-fglrxG02-kmp-desktop

I get warning that the checksum doesn’t match:
b3389bae3b3831b795fa0d9e3a5f7e8020df700b instead of expected 218837db3907ae3bed8b61c252c1c775d99b65d5

Any help appreciated?

Update …

Before I had openSuSe 11.1 than I have installed openSuSe 11.2 and the message start appearing when launching openGL apps. I am not sure when exactly (was it just after open suse 11.2 installation or after some online update later). I saw that in boot screen I have possibility to boot 11.1 (I do not know why) so I reinstalled 11.2 version but with formating (erasing) all drives. After that openGL applications worked fine. I do not know reason for all this but I am glad that now is working. I just hope it will not stop :slight_smile:

Boris

Congratulations! I have clean install of 11.2. an no success… :frowning:

Update…

My last message is not correct. I would like to delete it so that other users are not confused but do not know how (no edit button).

I still have same problem :frowning: . Here are some pastes:
Paste-It.net
Paste-It.net
Maybe someone could conclude something from them.

Boris

Hello,

Same here.

OpenSuSE 11.2 x86, ATI Radeon HD 2600 XT, using radeon driver.
I used: sax2 -r -m 0=radeon to create the xorg.conf.

kernel:
kernel-desktop-2.6.31.12-0.2.1.i586

lspci :
01:00.0 VGA compatible controller: ATI Technologies Inc RV630 [Radeon HD 2600XT]

glxgears:
drmRadeonCmdBuffer: -22. Kernel failed to parse or rejected command stream. See dmesg for more info.

I upgraded to Mesa-7.8.1-17.1.i586, to see if it would be better, but still the same.

I don’t see infos in dmesg, nor in Xorg.0.log, I can post them if desired.

57.846123] [drm] Initialized drm 1.1.0 20060810
57.850706] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
57.850538] pci 0000:01:00.0: setting latency timer to 64
58.042739] [drm] Setting GART location based on new memory map
58.058855] [drm] Loading RV630 CP Microcode
58.058993] [drm] Loading RV630 PFP Microcode
58.074034] [drm] Resetting GPU
58.074091] [drm] writeback test succeeded in 1 usecs

Was working fine with proprietary driver, but wanted to try radeon.
Any help would be appreciated :slight_smile:

In Xorg.0.log, after looking at it more carefully, I noticed these:

(–) PCI:*(0:1:0:0) 1002:9588:1043:01c4 rev 0, Mem @ 0xd0000000/268435456, 0xfe9
e0000/65536, I/O @ 0x0000d000/256, BIOS @ 0x???/131072

And something I don’t understand:

(II) RADEON(0): Output: DVI-1, Detected Monitor Type: 1
…]
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
…]
(II) AIGLX: Screen 0 is not DRI2 capable

I have only 1 screen, then why does he see 2 ?