disk not showing correct space after installing opensuse 11.3

Hi,

I am new to LVM partition and to opensuse.
I have installed opensuse111.3 x86_64 on a 1TB hard drive. However, I am really confused when i see the current diskspace status. it just shows 10GB space.

This is the output of fdisk


~ # fdisk -l

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00041507

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1          10       71680   83  Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2              10      121602   976689152   8e  Linux LVM

Disk /dev/dm-0: 10.7 GB, 10737418240 bytes
255 heads, 63 sectors/track, 1305 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/dm-0 doesn't contain a valid partition table

Disk /dev/dm-1: 2147 MB, 2147483648 bytes
255 heads, 63 sectors/track, 261 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/dm-1 doesn't contain a valid partition table



and this is the output of df -h

:~ # df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/system-root
                      9.9G  6.0G  3.5G  64% /
devtmpfs              1.9G  232K  1.9G   1% /dev
tmpfs                 1.9G  4.0K  1.9G   1% /dev/shm
/dev/sda1              68M   22M   43M  34% /boot
tmpfs                 6.0G     0  6.0G   0% /var/spool/asterisk/monitor


any idea how to fix this?

You system (11.3) has no support, so you may upgrade to 12.1 or 11.4.
Your problem is not a problem, you’re using LVM so the installer don’t
assign all the free space, only a part, if you go to YaST2 you’ll see
the rest of you hard disk as unasigned, and you can resize any LVM grup
adding space form the unasigned disk