Hi,
unfortunately my Dell Printer 3110cn connected via USB is not working properly.
lsusb Output:
Bus 001 Device 002: ID 413c:5605 Dell Computer Corp.
tail on syslog:
Aug 24 20:55:42 HAL9000 kernel: 303.508546] usb 1-1: USB disconnect, address 12
Aug 24 20:55:42 HAL9000 kernel: 303.508721] usblp0: removed
Aug 24 20:55:42 HAL9000 udev-configure-printer: remove /devices/pci0000:00/0000:00:1a.7/usb1/1-1
Aug 24 20:55:52 HAL9000 kernel: 312.667281] usb 1-1: new high speed USB device using ehci_hcd and address 13
Aug 24 20:55:52 HAL9000 kernel: 312.782117] usb 1-1: New USB device found, idVendor=413c, idProduct=5605
Aug 24 20:55:52 HAL9000 kernel: 312.782121] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Aug 24 20:55:52 HAL9000 kernel: 312.782124] usb 1-1: Product: Color Laser 3110cn
Aug 24 20:55:52 HAL9000 kernel: 312.782126] usb 1-1: Manufacturer: Dell
Aug 24 20:55:52 HAL9000 kernel: 312.782128] usb 1-1: SerialNumber: 0932137756
Aug 24 20:55:52 HAL9000 kernel: 312.783954] usblp0: USB Bidirectional printer dev 13 if 0 alt 0 proto 2 vid 0x413C pid 0x5605
Aug 24 20:55:52 HAL9000 mtp-probe: checking bus 1, device 13: “/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-1”
Aug 24 20:55:52 HAL9000 mtp-probe: bus: 1, device: 13 was not an MTP device
Aug 24 20:55:52 HAL9000 udev-configure-printer: add /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0
Aug 24 20:55:52 HAL9000 udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:1a.7/usb1/1-1
Aug 24 20:55:52 HAL9000 udev-configure-printer: Device vendor/product is 413C:5605
Aug 24 20:55:52 HAL9000 udev-configure-printer: failed to claim interface
Aug 24 20:55:52 HAL9000 udev-configure-printer: invalid or missing IEEE 1284 Device ID
Aug 24 20:55:52 HAL9000 udev-configure-printer: add /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/usb/lp0
Aug 24 20:55:52 HAL9000 udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:1a.7/usb1/1-1
Aug 24 20:55:52 HAL9000 udev-configure-printer: MFG:Dell MDL:Color Laser 3110cn SERN:- serial:0932137756
I have modified usb.ids already adding line 413C:5605, but this does not solve the issue.
Thanks and best regards