Hi!
I’m new to Opensuse, and for now the system is working prefectly.
My question is about my old Tv capture card, Dazzle VideoCollector 2006. I’m trying to use kaffeine to view dvb-t channels, but not appears on any site. I think is detected on kernel, but not appears in the system. Here is some info from
***/sbin/lspci -nnk***
03:05.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 02)
Subsystem: Askey Computer Corp. MagicTView CPH060 - Video [144f:3000]
Kernel driver in use: bttv
Kernel modules: bttv
03:05.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 02)
Subsystem: Askey Computer Corp. MagicTView CPH060 - Audio [144f:3000]
Kernel modules: snd_bt87x
And dmesg:
7.180721] bttv: driver version 0.9.19 loaded
7.180724] bttv: using 8 buffers with 2080k (520 pages) each for capture
7.180764] bttv: Bt8xx card found (0)
7.180826] bttv 0000:03:05.0: enabling device (0000 -> 0002)
7.180934] bttv: 0: Bt878 (rev 2) at 0000:03:05.0, irq: 20, latency: 32, mmio: 0xfa101000
7.189178] bttv: 0: detected: (Askey Magic/others) TView99 CPH06x [card=38], PCI subsystem ID is 144f:3000
7.189182] bttv: 0: using: Askey CPH06X TView99 [card=38,autodetected]
7.189338] bttv: 0: tuner type=1
7.307454] bttv: 0: audio absent, no audio device found!
7.386274] r8169 0000:02:00.0 enp2s0: renamed from eth0
7.396817] tea5767: All bytes are equal. It is not a TEA5767
7.396823] tuner: 5-0060: Tuner -1 found with type(s) Radio TV.
7.435504] tuner-simple 5-0060: creating new instance
7.435507] tuner-simple 5-0060: type set to 1 (Philips PAL_I (FI1246 and compatibles))
7.437062] bttv: 0: Setting PLL: 28636363 => 35468950 (needs up to 100ms)
7.473908] bttv: PLL set ok
7.475568] bttv: 0: registered device video0
7.475613] bttv: 0: registered device vbi0
7.545868] Registered IR keymap rc-winfast
7.545922] rc rc0: bttv IR (card=38) as /devices/pci0000:00/0000:00:14.4/0000:03:05.0/rc/rc0
7.545973] input: bttv IR (card=38) as /devices/pci0000:00/0000:00:14.4/0000:03:05.0/rc/rc0/input12
I need help to try to configure it correctly.
Thanks!