Can anyone say me if this USB-Adapter works well with Opensuse 11.1?
Must I take any configuration or works automatic?
Thanks
gets a green arrow on this page
HCL/Network Adapters (Wireless - openSUSE
with some comments about "Need to install the ralink-firmware package on OpenSUSE 11.0 " but presumably not needing now on 11.1
green arrow should mean works fine
any forum members who own one may chip up with comments
I buyed this adapter.
It seems be configured but I dont show webpages in firefox.
This is the output of my configuration:
linux-8777:/etc/sysconfig/network # /sbin/ifconfig
eth0 Link encap:Ethernet HWaddr 00:0B:6A:35:31:D2
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:11 Base address:0xd400
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:116 errors:0 dropped:0 overruns:0 frame:0
TX packets:116 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:9227 (9.0 Kb) TX bytes:9227 (9.0 Kb)
wlan1 Link encap:Ethernet HWaddr 00:21:91:93:B5:F8
inet addr:10.0.0.105 Bcast:10.0.0.255 Mask:255.255.255.0
inet6 addr: fe80::221:91ff:fe93:b5f8/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:406 errors:0 dropped:0 overruns:0 frame:0
TX packets:1011 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:135211 (132.0 Kb) TX bytes:142405 (139.0 Kb)
wmaster0 Link encap:UNSPEC HWaddr 00-21-91-93-B5-F8-35-66-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
linux-8777:/etc/sysconfig/network # nslookup Google
Server: 10.0.0.2
Address: 10.0.0.2#53
Non-authoritative answer:
Google canonical name = Google.
Name: Google
Address: 209.85.129.147
Name: Google
Address: 209.85.129.99
Name: Google
Address: 209.85.129.104
linux-8777:/etc/sysconfig/network # ping -c 3 209.85.129.104
PING 209.85.129.104 (209.85.129.104) 56(84) bytes of data.
— 209.85.129.104 ping statistics —
3 packets transmitted, 0 received, 100% packet loss, time 2015ms
linux-8777:/etc/sysconfig/network # netstat -rnv
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan1
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 wlan1
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 10.0.0.50 0.0.0.0 UG 0 0 0 wlan1
linux-8777:/etc/sysconfig/network #
I have a D-Link Access Point with DHCP Server
My default gateway is the access point 10.0.0.50
Ping to gateway works but is very very slow!
I dont know why!