Coupling of Nokia phone

I cannot couple my Nokia 6230i. In principle bluetooth (at level 4.19,
OpenSuse 11.1) seems to work because I get asked to enter a passkey
after starting xgnokii. However, the passkey-agent program is NOT on my
system (and it seems it never was after installation!). Is there a hope
that the bluez-stack will be updated soon - including the passkey-agent?
Regards H. Stoellinger


hstoellinger

hstoellinger’s Profile: http://forums.opensuse.org/member.php?userid=14801
View this thread: http://forums.opensuse.org/showthread.php?t=407416

Hi
What happens if you try the sdptool?


hcitool scan
(to get the mac address}
sdptool browse [mac address from above]


Cheers Malcolm °¿° (Linux Counter #276890)
openSUSE 11.1 x86 Kernel 2.6.27.7-9-default
up 10:15, 2 users, load average: 0.39, 0.27, 0.30
GPU GeForce 6600 TE/6200 TE - Driver Version: 180.27

Hello, thanks for bothering to post…
Again, after starting xgnokii, I get asked to enter a passkey at the
mobile phone. Then that key gets rejected.
Entering_gnokii–config_/etc/gnokiirc_–monitor
leads_to_the_following_output:_
The “funny smiley” in the port address actually is “d2”.

GNOKII Version 0.6.26
LOG: debug mask is 0x1
Config read from file /etc/gnokiirc.
phone instance config:
model = 6510
port = 00:12:D2:61:F5:90
connection = bluetooth
initlength = default
serial_baudrate = 19200
serial_write_usleep = -1
handshake = software
require_dcd = 0
smsc_timeout = 10
rfcomm_channel = 1
sm_retry = 0
Connecting
Serial device: opening device 00:12:D2:61:F5:90
Can’t connect: Connection refused
Couldn’t open PHONET device: Connection refused
Error in link initialisation: 1
Telephone interface init failed: Command failed.
Quitting.
Cannot unlock device.
Command failed.

Your_suggested_commands_lead_to_the_following_output:
sdptool browse 00:12:D2:61:F5:90
Browsing 00:12:D2:61:F5:90 …

Service Name: Dial-up networking

Service RecHandle: 0x10000

Service Class ID List:

“Dialup Networking” (0x1103)

“Generic Networking” (0x1201)

Protocol Descriptor List:

“L2CAP” (0x0100)

“RFCOMM” (0x0003)

Channel: 1

Language Base Attr List:

code_ISO639: 0x656e

encoding: 0x6a

base_offset: 0x100

Profile Descriptor List:

“Dialup Networking” (0x1103)

Version: 0x0100

Service Name: Nokia PC Suite
Service RecHandle: 0x10001
Service Class ID List:
“Serial Port” (0x1101)
Protocol Descriptor List:
“L2CAP” (0x0100)
“RFCOMM” (0x0003)
Channel: 15
Language Base Attr List:
code_ISO639: 0x656e
encoding: 0x6a
base_offset: 0x100

Service Name: COM 1
Service RecHandle: 0x10002
Service Class ID List:
“Serial Port” (0x1101)
Protocol Descriptor List:
“L2CAP” (0x0100)
“RFCOMM” (0x0003)
Channel: 3
Language Base Attr List:
code_ISO639: 0x656e
encoding: 0x6a
base_offset: 0x100

Service Name: Voice Gateway
Service RecHandle: 0x10003
Service Class ID List:
“Handsfree Audio Gateway” (0x111f)
“Generic Audio” (0x1203)
Protocol Descriptor List:
“L2CAP” (0x0100)
“RFCOMM” (0x0003)
Channel: 13
Language Base Attr List:
code_ISO639: 0x656e
encoding: 0x6a
base_offset: 0x100
Profile Descriptor List:
“Handsfree” (0x111e)
Version: 0x0101

Service Name: Audio Gateway
Service RecHandle: 0x10004
Service Class ID List:
“Headset Audio Gateway” (0x1112)
“Generic Audio” (0x1203)
Protocol Descriptor List:
“L2CAP” (0x0100)
“RFCOMM” (0x0003)
Channel: 12
Language Base Attr List:
code_ISO639: 0x656e
encoding: 0x6a
base_offset: 0x100
Profile Descriptor List:
“Headset” (0x1108)
Version: 0x0100

Service Name: SIM ACCESS
Service RecHandle: 0x10009
Service Class ID List:
“SIM Access” (0x112d)
“Generic Telephony” (0x1204)
Protocol Descriptor List:
“L2CAP” (0x0100)
“RFCOMM” (0x0003)
Channel: 4
Language Base Attr List:
code_ISO639: 0x656e
encoding: 0x6a
base_offset: 0x100
Profile Descriptor List:
“SIM Access” (0x112d)
Version: 0x0100

Service Name: OBEX Object Push
Service RecHandle: 0x1000b
Service Class ID List:
“OBEX Object Push” (0x1105)
Protocol Descriptor List:
“L2CAP” (0x0100)
“RFCOMM” (0x0003)
Channel: 9
“OBEX” (0x0008)
Language Base Attr List:
code_ISO639: 0x656e
encoding: 0x6a
base_offset: 0x100
Profile Descriptor List:
“OBEX Object Push” (0x1105)
Version: 0x0100

Service Name: OBEX File Transfer
Service RecHandle: 0x1000c
Service Class ID List:
“OBEX File Transfer” (0x1106)
Protocol Descriptor List:
“L2CAP” (0x0100)
“RFCOMM” (0x0003)
Channel: 10
“OBEX” (0x0008)
Language Base Attr List:
code_ISO639: 0x656e
encoding: 0x6a
base_offset: 0x100
Profile Descriptor List:
“OBEX File Transfer” (0x1106)
Version: 0x0100

Service Name: SyncML Client
Service RecHandle: 0x1000e
Service Class ID List:
UUID 128: 00000002-0000-1000-8000-0002ee000002
Protocol Descriptor List:
“L2CAP” (0x0100)
“RFCOMM” (0x0003)
Channel: 11
“OBEX” (0x0008)
Language Base Attr List:
code_ISO639: 0x656e
encoding: 0x6a
base_offset: 0x100


hstoellinger

hstoellinger’s Profile: http://forums.opensuse.org/member.php?userid=14801
View this thread: http://forums.opensuse.org/showthread.php?t=407416